Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    NUT Package (2.8.1 and above)

    Scheduled Pinned Locked Moved
    UPS Tools
    38
    265
    95.8k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • V
      vizi0n @dennypage
      last edited by

      @dennypage indeed, installing 2.7.1RC also installed nut-devel-2023.10.07_1 under the 2.8.1 name.

      So far, USB connectivity is already better ! Yay. Thanks

      1 Reply Last reply Reply Quote 1
      • UnoptanioU
        Unoptanio @dennypage
        last edited by Unoptanio

        @dennypage said in NUT Package (2.8.1 and above):

        rican Power Conversion Smart-UPS1000 FW:UPS 16.1 / ID1047>

        Hello,

        for my RIELLO model Vision VST1100
        https://www.riello-ups.it/products/1-gruppi-di-continuita/54-vision

        [2.7.0-RELEASE][admin@xxxxxxxxxxx-pfSense.home.arpa]/root: usbconfig -d ugen2.2 show_ifdrv
ugen2.2: <Cypress Semiconductor USB to Serial> at usbus2, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA)

        in pfsense i have this data from command usbconfig -v

        ugen2.2: <Cypress Semiconductor USB to Serial> at usbus2, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA)

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0000  <Probed by interface class>
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0000
  bMaxPacketSize0 = 0x0008
  idVendor = 0x04b4
  idProduct = 0x5500
  bcdDevice = 0x0001
  iManufacturer = 0x0001  <Cypress Semiconductor>
  iProduct = 0x0002  <USB to Serial>
  iSerialNumber = 0x0000  <no string>
  bNumConfigurations = 0x0001


 Configuration index 0

    bLength = 0x0009
    bDescriptorType = 0x0002
    wTotalLength = 0x0029
    bNumInterfaces = 0x0001
    bConfigurationValue = 0x0001
    iConfiguration = 0x0003  <Sample HID>
    bmAttributes = 0x0080
    bMaxPower = 0x0032

    Interface 0
      bLength = 0x0009
      bDescriptorType = 0x0004
      bInterfaceNumber = 0x0000
      bAlternateSetting = 0x0000
      bNumEndpoints = 0x0002
      bInterfaceClass = 0x0003  <HID device>
      bInterfaceSubClass = 0x0000
      bInterfaceProtocol = 0x0000
      iInterface = 0x0004  <EndPoint1 Interrupt Pipe>

      Additional Descriptor

      bLength = 0x09
      bDescriptorType = 0x21
      bDescriptorSubType = 0x11
       RAW dump:
       0x00 | 0x09, 0x21, 0x11, 0x01, 0x00, 0x01, 0x22, 0x25,
       0x08 | 0x00

     Endpoint 0
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0081  <IN>
        bmAttributes = 0x0003  <INTERRUPT>
        wMaxPacketSize = 0x0008
        bInterval = 0x000a
        bRefresh = 0x0000
        bSynchAddress = 0x0000

     Endpoint 1
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0002  <OUT>
        bmAttributes = 0x0003  <INTERRUPT>
        wMaxPacketSize = 0x0008
        bInterval = 0x000a
        bRefresh = 0x0000
        bSynchAddress = 0x0000

        [2.7.0-RELEASE][admin@xxxxxx-pfSense.home.arpa]/root:
        [2.7.0-RELEASE][admin@xxxxxx-pfSense.home.arpa]/root: usbconfig -d ugen2.2 detach_kernel_driver
        [2.7.0-RELEASE][admin@xxxxxx-pfSense.home.arpa]/root: usbconfig -d ugen2.2 show_ifdrv
        ugen2.2: <Cypress Semiconductor USB to Serial> at usbus2, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA)
        [2.7.0-RELEASE][admin@xxxxxx-pfSense.home.arpa]/root:
        [2.7.0-RELEASE][admin@xxxxxx-pfSense.home.arpa]/root: usbconfig dump_device_quirks | grep HID_IGNORE
        VID=0x0b05 PID=0x1726 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x051d PID=0x0002 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x051d PID=0x0003 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x050d PID=0x0375 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x050d PID=0x0551 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x050d PID=0x0750 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x050d PID=0x0751 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x050d PID=0x0900 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x050d PID=0x0910 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x050d PID=0x0912 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x050d PID=0x0980 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x050d PID=0x1100 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x0764 PID=0x0005 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x0764 PID=0x0501 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x0764 PID=0x0601 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x047c PID=0xffff REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x04b4 PID=0xfd13 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x1163 PID=0x0100 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x1d34 PID=0x0004 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x04d8 PID=0x0002 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x04d8 PID=0xc001 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x06da PID=0xffff REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x10af PID=0x0004 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x10af PID=0x0001 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x0463 PID=0x0001 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x0463 PID=0xffff REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x0d9f PID=0x00a2 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x0d9f PID=0x00a3 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x0d9f PID=0x00a4 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x0d9f PID=0x00a5 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x0d9f PID=0x00a6 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x09ae PID=0x1003 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x09ae PID=0x1007 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x09ae PID=0x1008 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x09ae PID=0x1f06 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x09ae PID=0x1f0a REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x09ae PID=0x2005 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x09ae PID=0x2007 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x09ae PID=0x3012 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x09ae PID=0x3014 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x09ae PID=0x4001 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x09ae PID=0x4002 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x09ae PID=0x4003 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x05ac PID=0x1290 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x05ac PID=0x1292 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x0665 PID=0x5161 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x04b4 PID=0x0bad REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x1781 PID=0x083e REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x1781 PID=0x083f REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        VID=0x1dd5 PID=0x5000 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE
        [2.7.0-RELEASE][admin@xxxxxx-pfSense.home.arpa]/root:

        Is THIS my new quirk for Riello VST1100?

        hw.usb.quirk.0="0x04b4 0x5500 0x0000 0xffff UQ_HID_IGNORE"

        50b59b8f-ac59-40c0-bcc7-e81cb4c9aaa1-image.png

        It seems like the new quirk isn't working

        one moment....correction....I disconnected the USB cable and reconnected...I re-executed the command: "/usr/local/etc/rc.d/nut.sh start"

        Result:

        34955a35-ae6c-4d18-b4c9-ce83d57c26b0-image.png

        Have we reached the final solution? 🤔 🤔 🤔

        Can I add my new quirk into the bootloader?

        Can you write me the complete command?

        .......
        maybe I found it, can you confirm?
        nano /boot/loader.conf

        30fec345-bb25-409e-b383-ce02d9d6c0b2-image.png

        I shut down the system and restart

        OK!!!

        UPS Working after system reboot.
        Without any settings Extra arguments to the driver (optional)

        151207c0-08ce-46f4-9194-92dea52e8113-image.png

        8217b401-0d01-42be-8e01-bbee351a2f7b-image.png

        9207c99e-5e16-4362-8c06-16cfc57e9c5a-image.png

        hw.usb.quirk.0="0x04b4 0x5500 0x0000 0xffff UQ_HID_IGNORE"

        I also own UPS Riello Sentinel Pro 2200 and Riello Sentinel Dual SDU 6Kw.

        As soon as I have time I'll check if the quirk also applies to this other UPS or if it has a different one

        .Test in progress ........
        Confirm: Quirk for Riello VST1100 also works on Riello Sentinel Pro 2200

        51e9cbf1-d87c-4049-8add-8f633e93bd0f-image.png
        de48f55c-748c-459d-b1f5-508128733eef-image.png
        6a7db0b8-1c18-4193-8ff7-8e4afdbfef66-image.png

        pfSensePlus24.03 2U BareMetal Asrock Industrial IMB-X1314MicroATX
        CPU: i7-13700@5.2GHz, RAM:32GB ECC, n°2 Samsung 870EVO SATA 2.5” SSD 1TB (ZFS) Raid1
        n°3 Intel i225-LM 2500/1000/100Mbps, n°1 NIC Intel i350-T4V2 10/100/1000 Mbps 4*GLAN, n°1 Intel X520-DA2

        dennypageD GertjanG 2 Replies Last reply Reply Quote 1
        • UnoptanioU Unoptanio referenced this topic on
        • dennypageD
          dennypage @Unoptanio
          last edited by

          @Unoptanio Good job!

          1 Reply Last reply Reply Quote 0
          • dennypageD dennypage referenced this topic on
          • GertjanG Gertjan referenced this topic on
          • dennypageD dennypage referenced this topic on
          • D
            dmitri
            last edited by

            I'm on 2.7CE, recently updated to NUT package 2.8.1 and started to have issues connecting to the remote NUT server. I have a UPS plugged into another machine (truenas) and pfSense connects to that machine over the network to get the UPS data. Has been working great since I've set this up a couple of years ago, but now the NUT service fails to start. Nothing in the System logs.

            I've added "RUN_AS_USER root" to the upsmon.conf and "user=root" to ups.conf. But those didn't have any effect.

            Any other suggestions?

            K dennypageD 3 Replies Last reply Reply Quote 0
            • K
              KarB1NE @dmitri
              last edited by

              @dmitri I believe you need to be either on pfSense CE 2.7.1 or pfSense Plus 23.09 for NUT 2.8.1 to work.

              D 1 Reply Last reply Reply Quote 1
              • D
                dmitri @KarB1NE
                last edited by

                @KarB1NE hmm. I'll give that a try in the coming days. I'm surprised that being on 2.7 it allows you to update to a package not compatible with that version. But certainly, that could be the issue. Thanks!

                1 Reply Last reply Reply Quote 0
                • dennypageD
                  dennypage @dmitri
                  last edited by

                  @dmitri said in NUT Package (2.8.1 and above):

                  I'm on 2.7CE, recently updated to NUT package 2.8.1

                  Can you clarify? Did you update the NUT package my hand?

                  Currently, for pfSense 23.09 or 2.7.0 I would expect NUT 2.8.0_2 as the package version. NUT 2.8.1 would be expected with either pfSense 23.09 or 2.7.1 only as a test version only.

                  D 1 Reply Last reply Reply Quote 0
                  • D
                    dmitri @dennypage
                    last edited by

                    @dennypage I didn't update by hand, used the Package Manager. But, I think I know what may have happened: I was trying to update to CE 2.7.1-RC and changed the branch (even though I'm still on 2.7), and that may have caused the new NUT package to show up.

                    Now I'm unable to upgradeto 2.7.1, however. The Update page says I'm on the latest 2.7. Even if I change to 2.7.1-RC branch. May need to force-upgrade it.

                    dennypageD 1 Reply Last reply Reply Quote 0
                    • dennypageD
                      dennypage @dmitri
                      last edited by

                      @dmitri said in NUT Package (2.8.1 and above):

                      I've added "RUN_AS_USER root" to the upsmon.conf and "user=root" to ups.conf. But those didn't have any effect.

                      FYI, if you are using a remote nut connection, you are not running upsd.

                      1 Reply Last reply Reply Quote 0
                      • dennypageD
                        dennypage @dmitri
                        last edited by

                        @dmitri said in NUT Package (2.8.1 and above):

                        I didn't update by hand, used the Package Manager. But, I think I know what may have happened: I was trying to update to CE 2.7.1-RC and changed the branch (even though I'm still on 2.7), and that may have caused the new NUT package to show up.

                        Okay, now that makes more sense.

                        The upsmon from 2.8.1 isn't going to be able to start in a 2.7.0 system because libraries that it needs, such as OpenSSL 3, are not there.

                        D 1 Reply Last reply Reply Quote 0
                        • D
                          dmitri @dennypage
                          last edited by

                          @dennypage

                          @dennypage said in NUT Package (2.8.1 and above):

                          FYI, if you are using a remote nut connection, you are not running upsd.

                          Yeah, I guess I was just shooting in the dark at this point :). I've since removed those lines.

                          After upgrading to 2.7.1-RC the issues went away. Thanks for the help!

                          dennypageD 1 Reply Last reply Reply Quote 0
                          • dennypageD
                            dennypage @dmitri
                            last edited by

                            @dmitri said in NUT Package (2.8.1 and above):

                            After upgrading to 2.7.1-RC the issues went away.

                            Are you running NUT 2.8.1 there?

                            D 1 Reply Last reply Reply Quote 0
                            • D
                              dmitri @dennypage
                              last edited by

                              @dennypage Just double checked, yes 2.8.1 NUT package on 2.7.1-RC.

                              1 Reply Last reply Reply Quote 1
                              • S
                                sgnoc
                                last edited by sgnoc

                                @dennypage I've done some additional testing. Initially when I tried the updated package I was receiving connection lost/established messages. I've restarted pfSense, removed all nut packages, reinstalled nut (pfsense-pkg-nut, and the nut package itself), removed nut, installed the nut-devel-2023.10.07_01 and restarted the service.

                                I then did some testing and grabbed some logs. So far I haven't received any more connection lost notices, but they were sporadic over an hour timeframe. Here are the logs/info, in case you see anything that jumps out. I do see no matching INFO_* value for OID listed for a bunch of different OID values (in the log).

                                [23.09-RELEASE][admin@netgate]/tmp/acme: upsc CyberPowerCP2200
battery.charge: 100
battery.current: 3.50
battery.date: 12/22/2022
battery.runtime: 3300
battery.runtime.elapsed: 0
battery.voltage: 81.10
battery.voltage.nominal: 72
device.contact: Shaun
device.description: UPS SNMP Card
device.location: Basement
device.mfr: CYBERPOWER
device.model: OL2200RTXL2U
device.serial: WBGEP2000038
device.type: ups
driver.debug: 0
driver.flag.allow_killpower: 0
driver.name: snmp-ups
driver.parameter.pollinterval: 2
driver.parameter.port: 10.10.5.10
driver.parameter.synchronous: auto
driver.state: quiet
driver.version: 2.8.0.1
driver.version.data: cyberpower MIB 0.55
driver.version.internal: 1.30
input.frequency: 60
input.transfer.reason: noTransfer
input.voltage: 123
output.current: 3.50
output.frequency: 60
output.voltage: 120.20
ups.delay.reboot: 0
ups.delay.shutdown: 180
ups.delay.start: 0
ups.firmware: S1A14
ups.id: CP2200
ups.load: 19
ups.mfr: CYBERPOWER
ups.model: OL2200RTXL2U
ups.serial: WBGEP2000038
ups.status: OL
ups.temperature: 34
ups.test.date: 11/12/2023
ups.test.result: Ok

                                [23.09-RELEASE][admin@netgate]/tmp/acme: snmpwalk -v 1 -c public 10.10.5.10 SNMPv2-SMI::enterprises.3808.1.1.1
SNMPv2-SMI::enterprises.3808.1.1.1.1.1.1.0 = STRING: "OL2200RTXL2U"
SNMPv2-SMI::enterprises.3808.1.1.1.1.1.2.0 = STRING: "CP2200"
SNMPv2-SMI::enterprises.3808.1.1.1.1.2.1.0 = STRING: "S1A14"
SNMPv2-SMI::enterprises.3808.1.1.1.1.2.3.0 = STRING: "WBGEP2000038"
SNMPv2-SMI::enterprises.3808.1.1.1.1.2.4.0 = STRING: "1.4.0"
SNMPv2-SMI::enterprises.3808.1.1.1.1.2.5.0 = NULL
SNMPv2-SMI::enterprises.3808.1.1.1.1.2.6.0 = INTEGER: 2200
SNMPv2-SMI::enterprises.3808.1.1.1.1.2.7.0 = INTEGER: 1800
SNMPv2-SMI::enterprises.3808.1.1.1.1.2.8.0 = INTEGER: 180
SNMPv2-SMI::enterprises.3808.1.1.1.1.2.9.0 = NULL
SNMPv2-SMI::enterprises.3808.1.1.1.2.1.1.0 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.2.1.2.0 = Timeticks: (0) 0:00:00.00
SNMPv2-SMI::enterprises.3808.1.1.1.2.1.3.0 = STRING: "12/22/2022"
SNMPv2-SMI::enterprises.3808.1.1.1.2.1.4.0 = INTEGER: 36
SNMPv2-SMI::enterprises.3808.1.1.1.2.2.1.0 = Gauge32: 100
SNMPv2-SMI::enterprises.3808.1.1.1.2.2.2.0 = Gauge32: 811
SNMPv2-SMI::enterprises.3808.1.1.1.2.2.3.0 = NULL
SNMPv2-SMI::enterprises.3808.1.1.1.2.2.4.0 = Timeticks: (330000) 0:55:00.00
SNMPv2-SMI::enterprises.3808.1.1.1.2.2.5.0 = INTEGER: 1
SNMPv2-SMI::enterprises.3808.1.1.1.2.2.8.0 = INTEGER: 72
SNMPv2-SMI::enterprises.3808.1.1.1.2.2.9.0 = NULL
SNMPv2-SMI::enterprises.3808.1.1.1.3.1.1.0 = INTEGER: 1
SNMPv2-SMI::enterprises.3808.1.1.1.3.2.1.0 = Gauge32: 1230
SNMPv2-SMI::enterprises.3808.1.1.1.3.2.2.0 = Gauge32: 1232
SNMPv2-SMI::enterprises.3808.1.1.1.3.2.3.0 = Gauge32: 1230
SNMPv2-SMI::enterprises.3808.1.1.1.3.2.4.0 = Gauge32: 600
SNMPv2-SMI::enterprises.3808.1.1.1.3.2.5.0 = INTEGER: 1
SNMPv2-SMI::enterprises.3808.1.1.1.3.2.6.0 = INTEGER: 1
SNMPv2-SMI::enterprises.3808.1.1.1.4.1.1.0 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.4.1.2.0 = INTEGER: 1
SNMPv2-SMI::enterprises.3808.1.1.1.4.1.3.0 = STRING: "40~70 Hz"
SNMPv2-SMI::enterprises.3808.1.1.1.4.2.1.0 = Gauge32: 1200
SNMPv2-SMI::enterprises.3808.1.1.1.4.2.2.0 = INTEGER: 600
SNMPv2-SMI::enterprises.3808.1.1.1.4.2.3.0 = Gauge32: 19
SNMPv2-SMI::enterprises.3808.1.1.1.4.2.4.0 = Gauge32: 35
SNMPv2-SMI::enterprises.3808.1.1.1.4.2.5.0 = Gauge32: 342
SNMPv2-SMI::enterprises.3808.1.1.1.4.2.6.0 = NULL
SNMPv2-SMI::enterprises.3808.1.1.1.4.2.7.0 = NULL
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.1.0 = INTEGER: 24
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.1.1 = INTEGER: 1
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.1.2 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.1.3 = INTEGER: 3
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.1.4 = INTEGER: 4
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.1.5 = INTEGER: 5
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.1.6 = INTEGER: 6
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.1.7 = INTEGER: 7
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.1.8 = INTEGER: 8
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.1.9 = INTEGER: 9
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.1.10 = INTEGER: 10
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.1.11 = INTEGER: 11
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.1.12 = INTEGER: 12
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.1.13 = INTEGER: 13
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.1.14 = INTEGER: 14
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.1.15 = INTEGER: 15
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.2.1 = STRING: "Outlet1"
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.2.2 = STRING: "Outlet2"
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.2.3 = STRING: "Outlet3"
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.2.4 = STRING: "Outlet4"
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.2.5 = STRING: "Outlet5"
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.2.6 = STRING: "Outlet6"
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.2.7 = STRING: "Outlet7"
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.2.8 = STRING: "Outlet8"
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.2.9 = STRING: "Outlet9"
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.2.10 = STRING: "Outlet10"
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.2.11 = STRING: "Outlet11"
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.2.12 = STRING: "Outlet12"
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.2.13 = STRING: "Outlet13"
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.2.14 = STRING: "Outlet14"
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.2.15 = STRING: "Outlet15"
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.3.1 = INTEGER: 0
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.3.2 = INTEGER: 0
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.3.3 = INTEGER: 0
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.3.4 = INTEGER: 0
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.3.5 = INTEGER: 0
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.3.6 = INTEGER: 0
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.3.7 = INTEGER: 0
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.3.8 = INTEGER: 0
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.3.9 = INTEGER: 0
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.3.10 = INTEGER: 0
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.3.11 = INTEGER: 0
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.3.12 = INTEGER: 0
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.3.13 = INTEGER: 0
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.3.14 = INTEGER: 0
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.3.15 = INTEGER: 0
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.4.1 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.4.2 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.4.3 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.4.4 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.4.5 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.4.6 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.4.7 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.4.8 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.4.9 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.4.10 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.4.11 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.4.12 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.4.13 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.4.14 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.5.1.2.1.4.15 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.5.2.1.0 = INTEGER: 120
SNMPv2-SMI::enterprises.3808.1.1.1.5.2.4.0 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.5.2.9.0 = Timeticks: (0) 0:00:00.00
SNMPv2-SMI::enterprises.3808.1.1.1.5.2.10.0 = Timeticks: (18000) 0:03:00.00
SNMPv2-SMI::enterprises.3808.1.1.1.5.2.11.0 = Timeticks: (18000) 0:03:00.00
SNMPv2-SMI::enterprises.3808.1.1.1.5.2.13.0 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.5.2.14.0 = INTEGER: 0
SNMPv2-SMI::enterprises.3808.1.1.1.5.2.15.0 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.5.2.16.0 = INTEGER: 0
SNMPv2-SMI::enterprises.3808.1.1.1.5.2.17.0 = INTEGER: 1
SNMPv2-SMI::enterprises.3808.1.1.1.5.2.18.0 = INTEGER: 20
SNMPv2-SMI::enterprises.3808.1.1.1.5.2.19.0 = NULL
SNMPv2-SMI::enterprises.3808.1.1.1.5.2.20.0 = NULL
SNMPv2-SMI::enterprises.3808.1.1.1.6.2.1.0 = INTEGER: 1
SNMPv2-SMI::enterprises.3808.1.1.1.6.2.2.0 = INTEGER: 1
SNMPv2-SMI::enterprises.3808.1.1.1.6.2.3.0 = INTEGER: 1
SNMPv2-SMI::enterprises.3808.1.1.1.6.2.5.0 = NULL
SNMPv2-SMI::enterprises.3808.1.1.1.6.2.6.0 = INTEGER: 1
SNMPv2-SMI::enterprises.3808.1.1.1.7.2.2.0 = INTEGER: 1
SNMPv2-SMI::enterprises.3808.1.1.1.7.2.3.0 = INTEGER: 1
SNMPv2-SMI::enterprises.3808.1.1.1.7.2.4.0 = STRING: "11/12/2023"
SNMPv2-SMI::enterprises.3808.1.1.1.7.2.6.0 = INTEGER: 1
SNMPv2-SMI::enterprises.3808.1.1.1.7.2.7.0 = NULL
SNMPv2-SMI::enterprises.3808.1.1.1.7.2.8.0 = NULL
SNMPv2-SMI::enterprises.3808.1.1.1.8.1.1.1.1.1 = INTEGER: 1
SNMPv2-SMI::enterprises.3808.1.1.1.8.1.1.1.1.2 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.8.1.1.1.1.3 = INTEGER: 3
SNMPv2-SMI::enterprises.3808.1.1.1.8.1.1.1.1.4 = INTEGER: 4
SNMPv2-SMI::enterprises.3808.1.1.1.8.1.1.1.1.5 = INTEGER: 5
SNMPv2-SMI::enterprises.3808.1.1.1.8.1.1.1.2.1 = INTEGER: 4
SNMPv2-SMI::enterprises.3808.1.1.1.8.1.1.1.2.2 = INTEGER: 1
SNMPv2-SMI::enterprises.3808.1.1.1.8.1.1.1.2.3 = INTEGER: 3
SNMPv2-SMI::enterprises.3808.1.1.1.8.1.1.1.2.4 = INTEGER: 4
SNMPv2-SMI::enterprises.3808.1.1.1.8.1.1.1.2.5 = INTEGER: 2
SNMPv2-SMI::enterprises.3808.1.1.1.10.1.0 = INTEGER: 1
SNMPv2-SMI::enterprises.3808.1.1.1.10.2.0 = Gauge32: 34

                                Here is the file with the output (ran for about 100 seconds) from: /usr/local/libexec/nut/snmp-ups -a ups -DDDDDD 2>&1 | tee /tmp/out
                                output.txt

                                I'm hoping the restart and reinstall of everything fixed whatever was causing the connection losts messages, but I'll update again if they reoccur.

                                Update about 2 hours later: The reboot and uninstall/reinstall of all NUT packages (to the devel package) seemed to do the trick. I haven't had a single connection lost notice since then. No idea why it was having issues after I tried the devel package, but it seems to be good now.

                                1 Reply Last reply Reply Quote 1
                                • T
                                  tman222
                                  last edited by

                                  Upgraded to the new NUT package (2.8.2) and I'm happy to report that I was able to remove the interruptonly flag and now see no more disconnects on the USB connected Cyberpower UPS. Thanks @dennypage for all your hard work updating and maintaining this pfSense package.

                                  dennypageD 1 Reply Last reply Reply Quote 1
                                  • dennypageD
                                    dennypage @tman222
                                    last edited by

                                    @tman222 said in NUT Package (2.8.1 and above):

                                    Thanks @dennypage for all your hard work updating and maintaining this pfSense package.

                                    You are most welcome

                                    1 Reply Last reply Reply Quote 0
                                    • evertE
                                      evert @dennypage
                                      last edited by

                                      @dennypage said in NUT Package (2.8.1 and above):

                                      Call for testing!

                                      We are in a testing/feedback phase for the 2.8.1 pfSense NUT package. Many of you have experienced issues with the 2.8.0 version and are running custom builds. I would like to ask you to test the new package prior to a general release.

                                      The 2.8.1 packages are available from the Redmine issue here. In order to install the package, you must be running 23.09. Be sure to select the correct package for your architecture.

                                      Can you tell me where I can get the previous package? I'm on 23.05.1 and upgraded NUT to 2.8.2 yesterday. Package management let me do this, even though NUT 2.8.2 apparently doesn't work with 23.05.1. Result: a busted nut...
                                      (I'll upgrade to 23.09 soon, but I can't do this during office hours)

                                      dennypageD 1 Reply Last reply Reply Quote 0
                                      • GertjanG
                                        Gertjan @Unoptanio
                                        last edited by

                                        @Unoptanio said in NUT Package (2.8.1 and above):

                                        maybe I found it, can you confirm?
                                        nano /boot/loader.conf

                                        Not that file, as pfSense can wipe / purge / empty / modify / do whatever it wants with the content.

                                        Read System Tunables and you'll find the one you need : /boot/loader.conf.local

                                        No "help me" PM's please. Use the forum, the community will thank you.
                                        Edit : and where are the logs ??

                                        1 Reply Last reply Reply Quote 1
                                        • dennypageD
                                          dennypage @evert
                                          last edited by

                                          @evert said in NUT Package (2.8.1 and above):

                                          @
                                          Can you tell me where I can get the previous package? I'm on 23.05.1 and upgraded NUT to 2.8.2 yesterday. Package management let me do this, even though NUT 2.8.2 apparently doesn't work with 23.05.1. Result: a busted nut...
                                          (I'll upgrade to 23.09 soon, but I can't do this during office hours)

                                          It shouldn’t show up in 23.05.1. Did you switch update streams? Best I can suggest is to remove the package and reinstall.

                                          evertE 1 Reply Last reply Reply Quote 1
                                          • S
                                            sgnoc
                                            last edited by

                                            @dennypage I got prompted on package manager that 2.8.2 was available and upgraded. Since then, I've started receiving the communication lost and established. I'm running a CyberPower UPS. I tried to put the nut-devel-2023.10.07_1.pkg back on, but it doesn't seem to be working with the other portion of NUT that was installed with 2.8.2. Was 2.8.2 the fix or is that still a version that hasn't been patched yet?

                                            What's my best bet to get this working again until a permanent fix is available? Thanks!

                                            dennypageD 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post