Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    NUT Package (2.8.1 and above)

    UPS Tools
    38
    265
    92.9k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • dennypageD
      dennypage @pvk1
      last edited by

      @pvk1 said in NUT Package (2.8.1 and above):

      ls -l /var/db/nut
      total 0
      ls: /var/db/nut: Permission denied

      As @Gertjan noted, you need to run the commands as root.

      P 1 Reply Last reply Reply Quote 0
      • P
        pvk1 @dennypage
        last edited by

        @dennypage
        Thx. I had disabled the admin user, so I could not login as root. The user that I login with is member of the system admins.

        I now enabled admin again.
        s: /var/db/nut:
        -rw-r--r-- 1 root nut 6 Apr 2 13:19 upsd.pid
        -rw-r--r-- 1 root nut 6 Apr 2 13:19 upsmon.pid
        srw-rw---- 1 root nut 0 Apr 2 13:19 usbhid-ups-ups
        -rw-r--r-- 1 root nut 6 Apr 2 13:19 usbhid-ups-ups.pid

        dennypageD 1 Reply Last reply Reply Quote 0
        • dennypageD
          dennypage @pvk1
          last edited by

          @pvk1 Running as non-root will require that ownership of /var/db/nut, and all files therein, to be user "nut".

          Note that all of the following needs to be done as root.

          Suggested path:

          • Remove user=root from the configuration. NB: If you have anything else in the Advanced section, please post that before continuing...
          • Shut down the UPS service via command "/usr/local/etc/rc.d/nut.sh stop".
          • Do "ps -axuw | grep ups" and see if any of the nut commands, such as upsmon, are still running. If they are you can stop them with "killall upsmon".
          • Change ownership of /var/db/nut via command "chown -R nut /var/db/nut".

          Following that, you should see permissions like so:

          [23.09.1-RELEASE][root@fw]/root: ls -ld /var/db
drwxr-xr-x  22 root wheel 54 Apr  2 08:29 /var/db
[23.09.1-RELEASE][root@fw.cococafe.com]/root: ls -la /var/db/nut
total 10
drwxr-x---   2 nut  nut    3 Apr  2 10:17 .
drwxr-xr-x  22 root wheel 54 Apr  2 08:29 ..
-rw-r--r--   1 nut  uucp   6 Apr  1 14:40 upsmon.pid
[23.09.1-RELEASE][root@fw]/root:

          You can also check permissions for /usr/local/etc/nut like so:

          [23.09.1-RELEASE][root@fw]/root: ls -ld /usr/local/etc
drwxr-xr-x  35 root wheel 91 Apr  2 08:45 /usr/local/etc
[23.09.1-RELEASE][root@fw]/root: ls -ld /usr/local/etc/nut
drwxr-xr-x  2 root wheel 24 Feb 10 12:16 /usr/local/etc/nut
[23.09.1-RELEASE][root@fw]/root: ls -la /usr/local/etc/nut/*.conf
-rw-r--r--  1 root wheel 1071 Feb  7 11:02 /usr/local/etc/nut/hosts.conf
-rw-r--r--  1 root wheel 4774 Feb  7 11:02 /usr/local/etc/nut/nut.conf
-rw-r-----  1 root wheel   43 Apr  1 14:29 /usr/local/etc/nut/ups.conf
-rw-r-----  1 root wheel   28 Apr  1 14:29 /usr/local/etc/nut/upsd.conf
-rw-r-----  1 root wheel  530 Apr  1 14:29 /usr/local/etc/nut/upsmon.conf
-rw-r--r--  1 root wheel 4217 Feb  7 11:02 /usr/local/etc/nut/upssched.conf
-rw-r--r--  1 root wheel 1871 Feb  7 11:02 /usr/local/etc/nut/upsset.conf
[23.09.1-RELEASE][root@fw]/root:

          Lastly, start the UPS service via command "/usr/local/etc/rc.d/nut.sh start".

          1 Reply Last reply Reply Quote 0
          • dennypageD
            dennypage @pvk1
            last edited by

            @pvk1 said in NUT Package (2.8.1 and above):

            Schermafbeelding 2024-03-30 091809.png

            It just occurred to me... was this attempt to start nut via /usr/local/etc/rc.d/nut.sh done as a non root user?

            If so, the output makes perfect sense.

            1 Reply Last reply Reply Quote 0
            • stephenw10S stephenw10 moved this topic from pfSense Packages on
            • GertjanG Gertjan referenced this topic on
            • dennypageD dennypage forked this topic on
            • dennypageD dennypage forked this topic on
            • dennypageD dennypage forked this topic on
            • S sandie referenced this topic on
            • S sandie referenced this topic on
            • dennypageD dennypage forked this topic on
            • J
              jonlecroy
              last edited by

              @dennypage I just upgraded to pfsense 24.03 with nut 2.8.2_2. Does this have the fix for this issue, or should I reapply the private? Thanks!

              dennypageD 1 Reply Last reply Reply Quote 0
              • dennypageD
                dennypage @jonlecroy
                last edited by

                @jonlecroy said in NUT Package (2.8.1 and above):

                Does this have the fix for this issue, or should I reapply the private?

                What issue are you referring to?

                J 1 Reply Last reply Reply Quote 0
                • J
                  jonlecroy @dennypage
                  last edited by

                  @dennypage Ah sorry, this is a general thread isn't it. The UPS regular maintenance sending an 'administrative off' which triggers a pfsense immediate halt when it shouldn't.

                  dennypageD 1 Reply Last reply Reply Quote 0
                  • dennypageD
                    dennypage @jonlecroy
                    last edited by

                    @jonlecroy said in NUT Package (2.8.1 and above):

                    The UPS regular maintenance sending an 'administrative off' which triggers a pfsense immediate halt when it shouldn't.

                    I believe this is addressed, yes.

                    1 Reply Last reply Reply Quote 1
                    • dennypageD dennypage referenced this topic on
                    • I
                      incith
                      last edited by

                      For what it's worth, I just did a pkg-static remove nut-devel and pfsense nut 2.8.2_1 blah blah. Cleaned it all out. Did a pkg-static update made sure repo is current. Installed the latest 2 packages from pfsense web gui, and tripplite USB is still broken.

                      pkg install -f nut-devel-2023.10.07_1.pkg

                      And it's fixed again.

                      dennypageD 1 Reply Last reply Reply Quote 0
                      • dennypageD
                        dennypage @incith
                        last edited by

                        @incith The next release is expected switch over to the 2.8.2 production release of NUT.

                        1 Reply Last reply Reply Quote 1
                        • First post
                          Last post