Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    PPPoE WAN does not restart correctly after reconfiguring interfaces.

    Scheduled Pinned Locked Moved
    General pfSense Questions
    6
    67
    2.6k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • P
      pFence
      last edited by

      It is configured as "Custom" periodic reset within the PPPoE configuration of interface WAN1.

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        OK, that should work.

        If the second WAN is disabled does the dhcpv6 on WAN reconnect correctly?

        1 Reply Last reply Reply Quote 0
        • P
          pFence
          last edited by pFence

          Yes, both PPPoE (IPv4) and DHCP6 connect correctly.

          1 Reply Last reply Reply Quote 0
          • stephenw10S
            stephenw10 Netgate Administrator
            last edited by

            Ok I thing we're going to need to see some logs of the reconnection to see what's happening there.

            1 Reply Last reply Reply Quote 0
            • P
              pFence
              last edited by

              Here's the PPP log when it failed.
              PPPoE failing.txt

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                That reads like there was other stuff happening before that log except starts?

                When was the reset?

                What does the system log show over that period?

                1 Reply Last reply Reply Quote 0
                • P
                  pFence
                  last edited by pFence

                  The reset is at 5:55. Here is the system log starting at 4:00:
                  log.txt

                  K 1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    Hmm, so it appears that something prevents the old mpd process closing for an excessively long time!

                    It doesn't actually close out until here:

                    Apr 17 05:57:30 gate1 check_reload_status[457]: updating dyndns opt8
Apr 17 05:57:30 gate1 check_reload_status[457]: Rewriting resolv.conf
Apr 17 05:57:30 gate1 ppp[47767]: [wan] IFACE: Down event

                    By which time the new mpd5 has given up.

                    Unclear why that would delay it. Or why a second dhcpv6 instance would make any difference.

                    With the other WAN disabled for v6 does the mpd process finish without that min wait?

                    P 1 Reply Last reply Reply Quote 0
                    • K
                      Konstanti @pFence
                      last edited by

                      hi
                      , the main problem I see is that when a new mpd process is started, the previously started processes are checked (whether the file /var/run/pppoe_wan.pid exists) if the file exists, a command is sent to terminate the process.

                      Apr 17 05:55:01 gate1 ppp[90881]: process 90881 started, version 5.9
                      Apr 17 05:55:01 gate1 ppp[90881]: waiting for process 47767 to die...

                      Then, within 30 seconds (30 attempts), the closing of the previous mpd process is checked again. If this does not happen, then the program terminates (your case)

                      Apr 17 05:55:31 gate1 ppp[90881]: waiting for process 47767 to die...
                      Apr 17 05:55:32 gate1 ppp[90881]: can't lock /var/run/pppoe_wan.pid after 30 attempts

                      . In your case, the previous process, for some unknown reason, was completed not within 30 seconds, but after 2 minutes and 30 seconds .

                      Apr 17 05:57:32 gate1 ppp[47767]: process 47767 terminated

                      1 Reply Last reply Reply Quote 0
                      • w0wW
                        w0w
                        last edited by w0w

                        BTW on the latest 24.03 RC builds I can't replicate this by issuing /usr/local/sbin/pfSctl -c 'interface reload wan' as before.

                        EDIT:

                        Got something, after switching to secondary firewall

                        2024-04-20 13:19:36.596539+03:00 	ppp 	98029 	process 98029 terminated
2024-04-20 13:19:36.595640+03:00 	ppp 	98029 	[wan_link0] Link: Shutdown
2024-04-20 13:19:36.498909+03:00 	ppp 	98029 	[wan] Bundle: Shutdown
2024-04-20 13:19:35.807384+03:00 	ppp 	92838 	waiting for process 98029 to die...
2024-04-20 13:19:34.804613+03:00 	ppp 	92838 	waiting for process 98029 to die...
2024-04-20 13:19:34.496426+03:00 	ppp 	98029 	[wan_link0] LCP: state change Closed --> Initial
2024-04-20 13:19:34.496379+03:00 	ppp 	98029 	[wan_link0] LCP: Down event
2024-04-20 13:19:34.496330+03:00 	ppp 	98029 	[wan_link0] LCP: Close event
2024-04-20 13:19:34.496281+03:00 	ppp 	98029 	[wan_link0] Link: giving up after 0 reconnection attempts
2024-04-20 13:19:34.496227+03:00 	ppp 	98029 	[wan_link0] Link: DOWN event
2024-04-20 13:19:34.495982+03:00 	ppp 	98029 	[wan_link0] LCP: LayerFinish
2024-04-20 13:19:34.495923+03:00 	ppp 	98029 	[wan_link0] LCP: state change Closing --> Closed
2024-04-20 13:19:34.495866+03:00 	ppp 	98029 	[wan_link0] LCP: rec'd Terminate Ack #3 (Closing)
2024-04-20 13:19:34.495045+03:00 	ppp 	98029 	[wan_link0] LCP: LayerDown
2024-04-20 13:19:34.494921+03:00 	ppp 	98029 	[wan_link0] LCP: SendTerminateReq #3
2024-04-20 13:19:34.494857+03:00 	ppp 	98029 	[wan] IPCP: state change Closed --> Initial
2024-04-20 13:19:34.494806+03:00 	ppp 	98029 	[wan] IPCP: Down event
2024-04-20 13:19:34.494749+03:00 	ppp 	98029 	[wan] IPCP: Close event
2024-04-20 13:19:34.494668+03:00 	ppp 	98029 	[wan] Bundle: Status update: up 0 links, total bandwidth 9600 bps
2024-04-20 13:19:34.494075+03:00 	ppp 	98029 	[wan_link0] Link: Leave bundle "wan"
2024-04-20 13:19:34.494024+03:00 	ppp 	98029 	[wan_link0] LCP: state change Opened --> Closing
2024-04-20 13:19:34.493975+03:00 	ppp 	98029 	[wan_link0] LCP: Close event
2024-04-20 13:19:34.493916+03:00 	ppp 	98029 	[wan_link0] Link: CLOSE event
2024-04-20 13:19:34.493714+03:00 	ppp 	98029 	[wan] IPCP: rec'd Terminate Ack #5 (Closed)
2024-04-20 13:19:34.493498+03:00 	ppp 	98029 	[wan] Bundle: closing link "wan_link0"...
2024-04-20 13:19:34.493448+03:00 	ppp 	98029 	[wan] Bundle: No NCPs left. Closing links...
2024-04-20 13:19:34.493399+03:00 	ppp 	98029 	[wan] IPCP: LayerFinish
2024-04-20 13:19:34.493340+03:00 	ppp 	98029 	[wan] IPCP: state change Closing --> Closed
2024-04-20 13:19:34.493281+03:00 	ppp 	98029 	[wan] IPCP: rec'd Terminate Ack #4 (Closing)
2024-04-20 13:19:34.492968+03:00 	ppp 	98029 	[wan] IPCP: SendTerminateReq #5
2024-04-20 13:19:34.492804+03:00 	ppp 	98029 	[wan] IFACE: Set description "WAN"
2024-04-20 13:19:34.492667+03:00 	ppp 	98029 	[wan] IFACE: Rename interface pppoe0 to pppoe0
2024-04-20 13:19:34.492452+03:00 	ppp 	98029 	[wan] IFACE: Down event
2024-04-20 13:19:34.492224+03:00 	ppp 	98029 	[wan] IFACE: Removing IPv4 address from pppoe0 failed(IGNORING for now. This should be only for PPPoE friendly!): Can't assign requested address
2024-04-20 13:19:33.789243+03:00 	ppp 	92838 	waiting for process 98029 to die...
2024-04-20 13:19:32.747960+03:00 	ppp 	92838 	waiting for process 98029 to die...
2024-04-20 13:19:31.746052+03:00 	ppp 	92838 	waiting for process 98029 to die...
2024-04-20 13:19:30.744279+03:00 	ppp 	92838 	waiting for process 98029 to die...
2024-04-20 13:19:29.742824+03:00 	ppp 	92838 	waiting for process 98029 to die...
2024-04-20 13:19:29.740665+03:00 	ppp 	92838 	process 92838 started, version 5.9
2024-04-20 13:19:29.742544+03:00 	ppp 	98029 	[wan] IPCP: LayerDown
2024-04-20 13:19:29.742278+03:00 	ppp 	98029 	[wan] IPCP: SendTerminateReq #4
2024-04-20 13:19:29.742176+03:00 	ppp 	98029 	[wan] IPCP: state change Opened --> Closing
2024-04-20 13:19:29.742077+03:00 	ppp 	98029 	[wan] IPCP: Close event
2024-04-20 13:19:29.741967+03:00 	ppp 	98029 	[wan] IFACE: Close event
2024-04-20 13:19:29.741737+03:00 	ppp 	98029 	caught fatal signal TERM
2024-04-20 13:19:29.738833+03:00 	ppp 	92838 	Multi-link PPP daemon for FreeBSD

                        It does appear different. It seems to be connected to the 'Multilink extensions over single link' option. I can't replicate the issue after unchecking this option and issuing

                        /usr/local/sbin/pfSctl -c 'interface reload wan'

                        However, when it's checked, it consistently fails to reconnect. It doesn't seem to be a direct bug, but there's definitely something wrong when the multilink configuration is applied. The primary firewall has this option unchecked.

                        But I remember I have had exactly the same behaviour as posted here https://forum.netgate.com/post/1163644 can't find now when it's changed

                        1 Reply Last reply Reply Quote 0
                        • stephenw10S
                          stephenw10 Netgate Administrator
                          last edited by

                          Huh, that's interesting. That's not set by default, was there some reason you enabled it?

                          w0wW 1 Reply Last reply Reply Quote 0
                          • w0wW
                            w0w @stephenw10
                            last edited by

                            @stephenw10
                            At some point, I was testing the capabilities of the provider and forgot to disable this option. However, it was definitely not related to the initially discussed issue, which is why I brought up this topic.

                            1 Reply Last reply Reply Quote 0
                            • P
                              pFence @stephenw10
                              last edited by

                              @stephenw10 said in PPPoE WAN does not restart correctly after reconfiguring interfaces.:

                              With the other WAN disabled for v6 does the mpd process finish without that min wait?

                              Seems so. See attached log file:
                              PPPoE not failing.txt

                              1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator
                                last edited by

                                Hmm, yeah 2.5s vs 2.5mins! Interestng.

                                Can I assume you don't have Multilink extensions enabled?

                                1 Reply Last reply Reply Quote 0
                                • P
                                  pFence
                                  last edited by

                                  "Multilink extensions over single link" is not enabled.

                                  1 Reply Last reply Reply Quote 0
                                  • P
                                    pFence
                                    last edited by pFence

                                    It seems that after upgrading to version 24.03 the PPPoE fails only exactly after every other periodic reset or manual interface reload while there is a DHCP6 configuration on the other WAN interface. This leads to the question whether the issue is related to one of the files changed for that upgrade. I am puzzled.

                                    1 Reply Last reply Reply Quote 0
                                    • stephenw10S
                                      stephenw10 Netgate Administrator
                                      last edited by

                                      Hmm, interesting. Unexpected!

                                      How does the logging differ between the two resets?

                                      RobbieTTR 1 Reply Last reply Reply Quote 0
                                      • RobbieTTR
                                        RobbieTT @stephenw10
                                        last edited by

                                        @stephenw10

                                        Hi Steve, I didn't particularly want to add additional noise to this thread but I also have the occasional hiccup when taking the PPPoE WAN down and back up again.

                                        Since the changes in 24.03 these are of a lower order of magnitude than previously they do still happen. Whilst I could not grab a log and point at it is my sense that this only happens when bringing the PPPoE WAN up now (since the changes) rather than both down and up.

                                        I've not been doing any true controlled testing (due to the cloud hanging over those of us willing to test betas but likely to be billed for it in the near future) but the changes have made a considerable difference to both my Netgate and non-Netgate hardware.

                                        However, they do still happen and when they do they can be oddly successive when they do happen, which causes considerable frustration. Other times I can go through multiple WAN down/up commands and have no issue at all.

                                        Regards
                                        ☕️

                                        1 Reply Last reply Reply Quote 0
                                        • stephenw10S
                                          stephenw10 Netgate Administrator
                                          last edited by

                                          Hmm, well if you can grab any logs to compare that may help here.

                                          1 Reply Last reply Reply Quote 0
                                          • P
                                            pFence
                                            last edited by

                                            Here's a log including both the successful interface reset as well as the one with failing PPPoE (pfsense 24.03).
                                            PPPoE not failing and failing v24.03.txt

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post