Access Tunnel network from Remote Access VPN instance
-
Mode: Remote Access ( SSL/TLS + User Auth )
Is configured for remote access to our LAN network in the office (192.168.1.0/24) I can access / ping any device on that LAN when connected to network via above VPN instance enabled.
We have multiple: Peer to Peer ( SSL/TLS ) tunnel networks setup each with a unique IP scope.
(192.168.40.0/24) is the scope in particular, I need to access a device on that scope, via the Remote Access VPN network.
On the remote access Server configuration I do, have the above scope in the list of available IPv4 Network that will be accessible from the remote endpoint, but cannot ping or access any device on that LAN.
Looking for direction as to what configuration changes I need to make to accommodate this need.
-
@mzaknoen
You have to add the access server tunnel network (192.168.1.0/24) to the "remote networks" on the remote peer to peer endpoint to add the route for it back to the office.