Traffic shaper changes [90% completed, please send money to complete bounty]

[eri--]

Just replace the file in /etc/inc/filter.inc with the content from this LINK and you should be ok.

Otherwise you just need to delete this 2 lines:
pass  quick on  {$oc['if']}  proto  icmp  keep  state  label  "let  out  anything  from  firewall  host  itself"
pass  quick on  {$oc['if']}  all  keep  state  label  "let  out  anything  from  firewall  host  itself"

and make them

pass  out  on  {$oc['if']}  proto  icmp  keep  state  label  "let  out  anything  from  firewall  host  itself"
pass  out  on  {$oc['if']}  all  keep  state  label  "let  out  anything  from  firewall  host  itself"

Whichever your prefer.

Ermal

[venis_LA]

i'm a newbie and want to know where and how can i contribute to get a copy to test 1.3 … many thanks thanks

[eri--]

You want access to the new shaper on 1.2 or have you replied on the wrong thread?

[venis_LA]

i want access to the new shaper .. thanks

[eri--]

Well you can send the offerings at ermal.luci@gmail.com and i will give you the link to the new shaper.

[ccfiel]

ermal, would the new traffic shaper allow you to distribute evenly bandwidth to the active workstations. example i have 2mb bandwidth. first  workstation 1 download a file so it gets the 2mb. after minute workstation 2 start download another file so workstation 1 gets 1mb and workstation 2 gets 1mb. is this possible with the new traffic shaper?

chris

[eri--]

yes, just use CBQ discipline and it will setup you up for that.

[ccfiel]

Hello ermal. I have send you a private message about the traffic shaper

Chris

[venis_LA]

Hello Ermal, I've made myccontribution but have not gotten any links to the new shaper,kindly advise. Thanks.

[eri--]

Check you mail i sent the reply with instructions.

Sorry but my connection has been spooky and am replying from another location right now.

Ermal

[ccfiel]

ermal, i have notice that sticky connection was missing. is this a bug?

chris

[eri--]

Will check it before making available the other image.

[ccfiel]

ok thanks ermal! and load balance does not work :(

[eri--]

What do you mean by load balance does not work?!

[ccfiel]

ermal, I have tried to enable the load balance but only the WAN1 will get all the load but it works well in 1.2 official release. is this also a bug? or just missing something?

chris

[eri--]

Can you please send me your rules.debug privately.

[ccfiel]

Hello ermal, pm sent :)

chris

[ccfiel]

Hello ermal,

i got this error. :( think this is the load balancer error. any ideas?

Jul 11 01:52:21 php: : New alert found: There were error(s) loading the rules: /tmp/rules.debug:146: syntax error pfctl: Syntax error in config file: pf rules not loaded The line in question reads [146]: pass in quick on $lan route-to { ( xl0 192.168.3.1 ) } from 192.168.0.0/24 to /32 keep state label "USER_RULE: Make sure DMZ 2 traffic goes to WAN2 DMZ"
Jul 11 01:52:21 php: : There were error(s) loading the rules: /tmp/rules.debug:146: syntax error pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [146]: pass in quick on $lan route-to { ( xl0 192.168.3.1 ) } from 192.168.0.0/24 to /32 keep state label "USER_RULE: Make sure DMZ 2 traffic goes to WAN2 DMZ"

chris

[ccfiel]

ermal, problem solve :) just change my ip /32 to /24

[ccfiel]

ermal,
      load balance is now working :) and sticky connection option appears :)  i am now testing your traffic shaper. My first problem is that the system can only see one interface. is this normal?

chris