DHCP v6 - no route to host

wallabybob

Sorry, I couldn't find an explanation in the revision history in the web page you linked to. Did you mean to link to a particular revision of that source file?

wallabybob

@wallabybob:

There is an ifconfig option (eui64) that looks as if it might be useful in computing the link local address from the bridge MAC address but the man page doesn't give a usage example. I'll explore that and report back later.

On reboot, my previously assigned link local address disappeared so there was an opportunity to try out the eui64 option:

# ifconfig bridge0
bridge0: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
	ether 86:8f:1f:f9:d3:c6
	inet 192.168.211.173 netmask 0xffffff80 broadcast 192.168.211.255
	inet6 2001:470:1f05:14b3::1 prefixlen 64 
	nd6 options=3 <performnud,accept_rtadv>id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
	maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200
	root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
	member: vr0 flags=143 <learning,discover,autoedge,autoptp>ifmaxaddr 0 port 3 priority 128 path cost 200000
	member: ath0_wlan0 flags=143 <learning,discover,autoedge,autoptp>ifmaxaddr 0 port 13 priority 128 path cost 370370
# ifconfig bridge0 inet6 add fe80::0/64 eui64
ifconfig: could not determine link local address
# ifconfig bridge0 inet6 add fe80::868f:1fff:fef9:d3c6/64
# ifconfig bridge0 
bridge0: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
	ether 86:8f:1f:f9:d3:c6
	inet 192.168.211.173 netmask 0xffffff80 broadcast 192.168.211.255
	inet6 2001:470:1f05:14b3::1 prefixlen 64 
	inet6 fe80::868f:1fff:fef9:d3c6%bridge0 prefixlen 64 scopeid 0xf 
	nd6 options=3 <performnud,accept_rtadv>id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
	maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200
	root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
	member: vr0 flags=143 <learning,discover,autoedge,autoptp>ifmaxaddr 0 port 3 priority 128 path cost 200000
	member: ath0_wlan0 flags=143 <learning,discover,autoedge,autoptp>ifmaxaddr 0 port 13 priority 128 path cost 370370
#</learning,discover,autoedge,autoptp></learning,discover,autoedge,autoptp></performnud,accept_rtadv></up,broadcast,running,promisc,simplex,multicast></learning,discover,autoedge,autoptp></learning,discover,autoedge,autoptp></performnud,accept_rtadv></up,broadcast,running,promisc,simplex,multicast>

so, looks as if the eui64 option is no use to generate a link local address from the "MAC" address of a bridge.

rjairam

@wallabybob:

Sorry, I couldn't find an explanation in the revision history in the web page you linked to. Did you mean to link to a particular revision of that source file?

http://lists.freebsd.org/pipermail/freebsd-net/2007-March/013835.html

rev 1.28
Add support for multicast to the bridge and allow inet6 addresses to be
assigned to the interface.

IPv6 auto-configuration is disabled. An IPv6 link-local address has a
link-local scope within one link, the spec is unclear for the bridge case and
it may cause scope violation.

An address can be assigned in the usual way;
ifconfig bridge0 inet6 xxxx:…

wallabybob

Thanks.

wallabybob

After updating to 2.0-RC1-IPv6 (i386)
built on Sun Mar 20 02:20:38 EDT 2011 I noticed in /var/log/system.log:

Mar 21 06:29:42 pfsense php: : The command ' bridge0 inet6 fe80::/64 eui64' returned exit code '127', the output was ''

and

Mar 21 06:41:53 pfsense dhcpd: send_packet6: No route to host
Mar 21 06:41:53 pfsense dhcpd: dhcpv6: send_packet6() sent -1 of 84 bytes

so I guess the eui64 option doesn't work on bridges. (I have a wired LAN and wireless LAN bridged together and DHCP server on the bridge.)

databeestje

That means I need to write a php function to perform that calculation. Sometime this century then.

Attempted fix committed.

rjairam

How is the MAC address of a bridge calculated anyway? Mine seems to change on every boot. Is it some random value?

wallabybob

@rjairam:

How is the MAC address of a bridge calculated anyway? Mine seems to change on every boot. Is it some random value?

From the FreeBSD bridge man page:

The if_bridge interface randomly chooses a link (MAC) address in the range reserved for locally administered addresses when it is created. This address is guaranteed to be unique only across all if_bridge interfaces on the local machine. Thus you can theoretically have two bridges on the different machines with the same link addresses. The address can be changed by assigning the desired link address using ifconfig(8 ).

rjairam

Ah.

There is a utility called ipv6calc that can be used to generate EUI 64 link local addresses.

http://www.tunnelbroker.net/forums/index.php?topic=751.0

In reality I've been able to get away with any random nonsense and it seems to work. It may not be right but so is assigning a link local to a bridge.

databeestje

Calculating the eui64 from the existing hardware address isn't too bad with a bad of calculus and string replacement. I just have not tried reproducing it yet.

MrKoen

@wallabybob:

I was feeling brave and enabled DHCP6 on my pfSense. After some futzing around with firewall rules and client software I finally got a DHCP Solicit to pfSense dhcpd which wasn't able to process the solicit.

I still can not get the DHCPv6 service to work on my pfSense box. Can't figure out why. All it lists in the logs is:

May 2 11:23:38 dhcpd: Sending on Socket/14/em0/2001:470:xxx:51::/64
May 2 11:23:38 dhcpd: Listening on Socket/14/em0/2001:470:xxx:51::/64
May 2 11:23:38 dhcpd: Bound to *:547
May 2 11:23:38 dhcpd: Wrote 0 leases to leases file.
May 2 11:23:38 dhcpd: For info, please visit https://www.isc.org/software/dhcp/
May 2 11:23:38 dhcpd: All rights reserved.
May 2 11:23:38 dhcpd: Copyright 2004-2010 Internet Systems Consortium.
May 2 11:23:38 dhcpd: Internet Systems Consortium DHCP Server 4.1.1-P1

DHCPv4 works fine, however DHCPv6 requests never arrive at or get logged by pfSense. Since you mention in your post you had to play with firewall rules to get it to work, I was wondering what exactly did you set in your rules? Possibly that's the issue here as well.

MrKoen

One step further.. it was indeed a firewall rule that blocked the DHCPv6 requests. I have an alias which specifies the IPv4 and IPv6 ranges on my local network which are allowed to send traffic through pfSense. From the logs posted here I noticed the DHCPv6 requests come from fe80::/64 addresses. So I added that to my alias specifying my local network addresses and the DHCP logs started to report the DHCPv6 requests and give out leases.

The problem I'm facing now is that my client does get an IPv6 lease from pfSense, but it doesn't request the gateway and it assumes the DHCPv6 address to have a CIDR of 128. So it can not connect to the outside world and can not reach other IPv6 hosts within the same /64 address space.

MrKoen

I think I have found the problem.

It is caused by this change about a week ago:
https://rcs.pfsense.org/projects/pfsense/repos/pfSense-smos/commits/753bd64dffb8352ea273c1bf1f00aa099ec38634

The raflags for the rtadvd router discovery were changed from a numeric format to a letter in the /etc/inc/services.inc file. The translation for the "assist" mode wasn't correct though. The 192 number has been replaced by an O while this should be a M and an O. This will cause my Windows 7 client to discover the pfSense router first and get the assignment from it to request an IPv6 address via a DHCP broadcast resulting in both a gateway and an IPv6 lease. Currently since it only gives the O assignment, it only uses DHCPv6 to discover DNS services on the network, but not retrieve a DHCPv6 address. This causes it to generate its own address based on the address space the gateway is in.

Documentary supporting this thought: http://blogs.technet.com/b/teamdhcp/archive/2009/03/03/dhcpv6-understanding-of-address-configuration-in-automatic-mode-and-installation-of-dhcpv6-server.aspx from which I qoute:

Both M and O Flags are Set to 1. DHCPv6 is used for both addresses and other configuration settings. This combination is known as DHCPv6 stateful, in which DHCPv6 is assigning stateful addresses to IPv6 hosts.

And actually the /etc/inc/services.inc file also contains a comment supporting this:

/* raflags, other o, managed=64 m, stateful=128, both=192 */

@Databeestje, could you have a look at this and change it in the code if you confirm my suspicion to be correct?

I changed my DHCPv6 operating mode to Managed /services_dhcpv6.php to see what that would do and now my pfSense installation seems to have gotten corrupt. I'm getting loads of the following messages in my logs:

dhcpd: /var/db/dhcpd6.leases line 834: corrupt lease file; expecting ia_na contents, got ' '

When starting the dhcpd deamon it actually kills the whole webinterface and will eventually result in the following message in my browser:

Fatal error: Allowed memory size of 268435456 bytes exhausted (tried to allocate 24 bytes) in /etc/inc/util.inc on line 905

When I run killall dhcpd through the console, the webinterface comes back up. Even trying to set it back to operating mode Assisted will not get it working anymore. Also the mentioned file /var/db/dhcpd6.leases file does not exist so I have no idea why it tries to read line 834 from it.

Does anyone have a clue how I can fix this again?

MrKoen

I got the dhcpd deamon back up again. I simply went to Diagnostics -> Edit file -> /cf/conf/config.xml -> Load and replaced the <lan>contents within <dhcpdv6>with an empty set of nodes copied from a NIC on which DHCPv6 was not enabled. Now the dhcpd deamon starts again. However, when I try to enable the DHCPv6 service again in any operation mode, the problem returns. So there is a serious bug in there somewhere which once triggered will eliminate the use of the DHCPv6 service.</dhcpdv6></lan>

databeestje

Now I know how to reproduce the out of memory issue. I'll have a look later this evening.

MrKoen

I saw you have adjusted the raflags accordingly. Just gitsynced and ran some tests and it works like a charm now! Only thing I can't get to work yet is the DHCPv6 reservations. Reservations are simply ignored and an address from the address pool is provided. Is this a thing you're still working on or should it work and do I need to play with it some more to try to get it to work?

MrKoen

Actually what I can not do anymore with the latest version is let pfSense send out the advertisements through rtadvd and let my Windows DHCPv6 hand out the IPv6 addresses as it used to do (since I have the IPv6 reservations working on my Windows server). For it to work I need pfSense to advertise itself using the MO flags, but when I configure pfSense in Assisted mode, it automatically also enables its own DHCPv6 service thus causing a conflict on the network with pfSense which is also giving out addresses. Ideally it should be that I can always choose an operating mode on the DHCPv6 page in pfSense, but only when I check the box to enable the DHCPv6 server, it will also enable the DHCPv6 service. Sounds rather logical too if you think about it. Is this a thing you agree on Databeestje and can realize? I can change the Javascript on the page to allow this if you want.

MrKoen

Databeestje, I saw you have followed up on my proposal already and checked in some changes regarding this matter. Great work! I have found a few issues with it so far:

1. When I keep the mode at advertised and disable the DHCPv6 service, it still provides DHCPv6 addresses
2. The DHCP service reports an error on startup in the system log:

php: /services_dhcpv6.php: The command '/usr/local/sbin/dhcpd -6 -user dhcpd -group _dhcp -chroot /var/dhcpd -cf /etc/dhcpdv6.conf -pf /var/run/dhcpdv6.pid em0_vlan3' returned exit code '1', the output was 'Internet Systems Consortium DHCP Server 4.1.1-P1 Copyright 2004-2010 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ /etc/dhcpdv6.conf line 23: expecting string or hexadecimal data. host-identifier option dhcp6.client-id ; ^ /etc/dhcpdv6.conf line 28: expecting string or hexadecimal data. host-identifier option dhcp6.client-id ; ^ Configuration file errors encountered – exiting If you did not get this software from ftp.isc.org, please get the latest from ftp.isc.org and install that before requesting help. If you did get this software from ftp.isc.org and have not yet read the README, please read it before requesting help. If yo

3. When entering a DUID at the DHCPv6 reservation page, it does not get past the validator which keeps stating that it is not a valid DUID while it is. I also do not understand the remark posted under the field:

Enter a DUID Identifier in the following format:
"DUID-LLT - ETH – TIME --- ---- address ----"
"xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx"

My DUID matches the xx:xx format shown, but is not accepted. What is meant with the line above the xx:xx?

MrKoen

I see new checkins have been done which fix the DUID problem. I can indeed add a DUID reservation now. However, the whole DHCPv6 system doesn't work anymore with the latest gitsync. I'm getting this error in the system log:

php: /services_dhcpv6.php: The command '/usr/local/sbin/dhcpd -6 -user dhcpd -group _dhcp -chroot /var/dhcpd -cf /etc/dhcpdv6.conf -pf /var/run/dhcpdv6.pid em0 em0_vlan3' returned exit code '1', the output was 'Internet Systems Consortium DHCP Server 4.1.1-P1 Copyright 2004-2010 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ /etc/dhcpdv6.conf line 23: expecting string or hexadecimal data. host-identifier option dhcp6.client-id 00-01-00-01-12-0D-0D-6C-00-1E-8C-4A-56-F ^ /etc/dhcpdv6.conf line 36: expecting string or hexadecimal data. host-identifier option dhcp6.client-id ; ^ /etc/dhcpdv6.conf line 41: expecting string or hexadecimal data. host-identifier option dhcp6.client-id ; ^ Configuration file errors encountered – exiting If you did not get this software from ftp.isc.org, pleas

I noticed it complaining about my DUID reservation. I have added it as Windows reports it: in the xx-xx-xx format instead of the required xx:xx:xx format. You might want to add a little regular expression JavaScript validation on the DUID field to make sure its added in the xx:xx:xx format. Or better yet, add a piece of JavaScript to the onblur of the textfield that will replace the '-' with ':' so it's still Windows copy/paste friendly :)

I just changed the DUID to the correct xx:xx:xx format. I'm still getting an error in the system logs and am still not getting a DHCPv6 lease. Also still nothing in the DHCP logs regarding IPv6 requests or responses. The error I'm getting in the system logs is:

php: /services_dhcpv6.php: The command '/usr/local/sbin/dhcpd -6 -user dhcpd -group _dhcp -chroot /var/dhcpd -cf /etc/dhcpdv6.conf -pf /var/run/dhcpdv6.pid em0 em0_vlan3' returned exit code '1', the output was 'Internet Systems Consortium DHCP Server 4.1.1-P1 Copyright 2004-2010 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ /etc/dhcpdv6.conf line 36: expecting string or hexadecimal data. host-identifier option dhcp6.client-id ; ^ /etc/dhcpdv6.conf line 41: expecting string or hexadecimal data. host-identifier option dhcp6.client-id ; ^ Configuration file errors encountered – exiting If you did not get this software from ftp.isc.org, please get the latest from ftp.isc.org and install that before requesting help. If you did get this software from ftp.isc.org and have not yet read the README, please read it before requesting help. I

It seems there is still something wrong with my reservation so I removed the reservation and restarted the dhcp deamon. Now I'm getting in the situation again where the dhcpd service kills the webinterface of pfSense. Only this time, doing a killall dhcpd on the console did not bring it back up. So next I tried rebooting the pfSense server. Luckily this brings it back up again. I did notice an error during the boot though. Something with a foreach loop in some interfaces file. I tried rebooting again and recording the bootup into an AVI to capture the error, but it did not occur anymore.

After the reboot, still no response from the DHCPv6 service and still this error with all DUID reservations now being removed:

php: : The command '/usr/local/sbin/dhcpd -6 -user dhcpd -group _dhcp -chroot /var/dhcpd -cf /etc/dhcpdv6.conf -pf /var/run/dhcpdv6.pid em0 em0_vlan3' returned exit code '1', the output was 'Internet Systems Consortium DHCP Server 4.1.1-P1 Copyright 2004-2010 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ /etc/dhcpdv6.conf line 31: expecting string or hexadecimal data. host-identifier option dhcp6.client-id ; ^ /etc/dhcpdv6.conf line 36: expecting string or hexadecimal data. host-identifier option dhcp6.client-id ; ^ Configuration file errors encountered – exiting If you did not get this software from ftp.isc.org, please get the latest from ftp.isc.org and install that before requesting help. If you did get this software from ftp.isc.org and have not yet read the README, please read it before requesting help. If you intend to requ

The router advertisement flags are still handed out correctly using assisted mode, DHCPv4 addresses are still provided, but no response at all from the DHCPv6 service anymore. May it have something to do with the firwall rules you have cooked into the software? The behavior is the same as when I had my firewall rules set incorrectly.

When I set it to unmanaged mode on the router advertisements, my clients discover the gateway and will auto-generate an IPV6 address to use. So that is okay.

MrKoen

More findings. Checking the in the error reported config file at /var/dhcpd/etc/dhcpdv6.conf I noticed the error is referring to the following content of this file:

}host s_opt1_0 {
host-identifier option dhcp6.client-id ;
fixed-address6 2001:470:-removed-:52::21;
option host-name DC4;
}
host s_opt1_1 {
host-identifier option dhcp6.client-id ;
fixed-address6 2001:470:-removed-:52::55;
option host-name KoenLaptop;
}

Turns out on a different interface I still had two reservations. I removed these, restarted the dhcp deamon and no errors in the system logs anymore and it did start to provide DHCPv6 addresses again from the pool!

Next I tried adding a DUID reservation again. I did an ipconfig /renew6 on my Windows 7 x64 client and voila: my reserved IPv6 address was returned. Databeestje, you da man! :D