Netonix and MikroTik will be able to have some of that you are searching as I can remember on it. Try start your search there would be not a bad idea in my eyes.

I just tried changing to net30, but it doesn't seem to have helped. I also seem to be having the same dpinger messages in my log as this thread: https://forum.pfsense.org/index.php?topic=110751.0 (although my pfsense isn't virtual)

CPU: Intel Core2 Quad Q8400S Mobo: Super Micro X7SBL-LN2 RAM: 8GB DDR2 SSD: 60gb corsair Would be powerful enough for all. Did you here about WSUS offline you can fairly install it on one of your PCs and burn from time to time a new DVD or DVD-RW again and again. So you would be able to install the MS patches on your PC very fast and directly! Put the 250 GB HDD in the PC and unpack there the WSUS offline program the it will collect according your settings all updates for, Windwos 7,8,8.1,10 and MS Office since 2007,2010,20… and it will create for each MS Version a own DVD image, I am storing that ones on a NAS so I am really able to install things back over the LAN and together with a virtual drive I am able to mount the images directly! So you will only need a 60 GB SSD and this might be running then well for you! On top of this please search the forum about Squid and WSUS. i currently have a netgear DGND3700 i dont beleive this will allow a true bridge mode.  im thinking ill get a https://www.pccasegear.com/products/27551/draytek-vigor130-vdsl2-adsl2-2-modem-router or https://www.pccasegear.com/products/17063/draytek-vigor-120-adsl2-2-modem-router Many users were reporting that the DrayTek Vigor 130 is running very well and is sufficient enough for usage as a pure modem acting in the so called "bridge mode". Each cent is good invested here. Try to install on the Netgear DGND3700 DD-WRT or OpenWRT and use it as a wireless AP connecting to the LAN1 Port. For that it would be a nice device to serve WiFi without any hassle to the LAN.

What version of pfSense? And compare the output of "ifconfig gre0" when done in the GUI vs in the shell. You may be hitting this, which has been fixed on 2.3: https://redmine.pfsense.org/issues/6010

It's generated with php's uniqid() function. It doesn't matter what the ID actually is, so long as it's referenced consistently. The format isn't set in a spec or anything, we just use uniqid() since it's quick/easy and easier to look at than a full uuid…

Thanks for your feedback

I added those 4 (plus nano, another oft-requested one, while I was at it) to the poudriere build list. They should be available via 'pkg install' now.

Before I return the network card, I tried booting PfSense without it plugged into the PCIe slot, and it wouldn't boot. I assume this means that PfSense needs a network card to even boot. If the card wasn't being recognized before (I doubt it's recognized as a RealTek device), why isn't PfSense booting? Note - It is bootlooping after the console gives itself a reset command…

Well. Tried going down to 2.2.6 and no good. tried 2.2.3 still same thing. Tried 2 different Hardware and still same thing. but if I connect the ISP directly to the PC everything works fine. This is really frustrating.

pfSense uses bsnmpd, not net-snmpd. bsnmpd does not support exec statements in that way. For pf-related stats from bsnmpd, see https://raw.githubusercontent.com/pfsense/FreeBSD-src/devel/usr.sbin/bsnmpd/modules/snmp_pf/BEGEMOT-PF-MIB.txt

I had this working with my UVerse TV sitting on it's own dedicated interface on my pfSense box with 2.2.6, but it seems to be broken with the 2.3 update. I suspect it has to do with either upstream forwarding or IGMP snooping.  My TV STB's work for about about 6 minutes, then when the Snooping times out, the connection gets dropped.  However, if I wait a bit, it does reconnect again, but then works until just after the timeout. Any way to get the igmpproxy which was distributed with 2.2.6 included with the next update?  As I understand it, it was patched and these patches were not included with 2.3.  I could be wrong. I also have a /29 fixed IP block which was also working with the IPTV and traffic was separated onto two dedicated ethernet ports on the pfSense box.  The /29 is working, but IGMP is no longer.

@bwdutton: As noted above, download the nrpe package from: http://pkg.freebsd.org/freebsd:10:x86:64/latest/All/ There are a few dependencies so you'll need to install libgd and nagios-plugins as well. Is there a way to install all dependencies with one command or do I have install one by one?

Thank you I didn't think of failover situations.

I cannot get NAT Reflection to work at all.  The only way I have been able to access actual URL's that are behind the firewall with my workstation, or any other machine behind the firewall is through the HOSTS file

So the plot thickens. Did a fresh install of 2.2.6 and I am still unable to get an IP on one of my onboard NIC's. The system see's the NIC fine, but regardless of whether it's LAN or WAN it won't grab an IP. One thing to note, is that I noticed my OpenWRT WAP was running an IPv6 DHCP server… I disabled this, but it was the last thing I did last night before I called it. I'm starting to think I have a hardware failure... but it seems odd that I would have a failed onboard NIC out of the blue. ~Spritz

The only way it can tell whether a device is "active" is by the ARP table. If you're using static ARP, the IP is always in the ARP table.

Thanks for not removing bash during the upgrade then I guess ;).