might help http://forum.pfsense.org/index.php/topic,13528.msg72444.html#msg72444

Sorry there seems to be no solution at this time. Try Monowall. For my system it works fine. I will use it until there is a bug fix or other hints for a solution. Regards Hans

Okay maybe I should just upgrade and see if it works out that way. Thanks!

Wrong user? admin or root works I like putty as client.

Use the domain override. send a.com to some IP that won't resolve for that domain.

Heat? same bad Ram? Same Nic? Same power supply?…Everything is new? nothing was recycled from the old unit??..It does seem like a hardware issue though.

do you mean "widentd"?  I never got that to work successfully.  It isn't necessary anyway, since you can resolve the issue widentd exists for by adding a reject rule on the WAN for TCP/113.

You're probably exhausting the state table first, you'll need to bump it way up from the default 10,000.

Here is what works for me: port forward udp/5060 to pbx (tcp/5060 is not necessary).  Port foward the range your pbx expects for RTP.  And (important) go to NAT => Outbound and switch from automatic to manual.  When that is done, edit the rule that shows up and select "static port".

There are lots of patches against FreeBSD, sure, but I don't believe that the fundamental underlying order of things has been changed. I don't recall if there is a diagram on the wiki or not. I know it's been explained a few times is various places on the forum, but I don't recall seeing a graphic. The book is a far more complete and accurate set of documentation  8)

You can't do that without forcing all traffic to go through pfSense. As for file sharing in Windows - SMB/CIFS.  You can certainly set up shares between 2 boxes, secured by passwords - as long as you don't shared the passwords with the unauthorised users they won't trivially be able to access those shared.

Does this sign in timeout at all? You could setup a cron job (see the cron package) which would ping a site every couple minutes to keep the session active. Not perfect, but it might work. pfSense pings its gateway a lot to check the line quality, but I suspect that device is looking for traffic trying to go out past it to the internet, not just a ping directly to it.

Looks like a basic networking problem ;) You need to either use RFC1918 addresses, or the real ones, not both.

Done

Great news :) That serial cable will come in handy again soon, I'm sure.