OK, thanks! I finally got access to my webgui again…  it wasn't a bug, it was just a misstyped port for the webgui. Anyway, I found that if you use a different port for the webgui, some of the utilities, don't work, but I'll start a new topic for this in order to get the forum clear. Thanks again for your help people!!! :)

The problem is that I don't know your clientsoftware and how your satelite connection works so I can't be really of much help with that. sorry  :-\

A number of people have been complaining about these problems on the FreeBSD lists.  It's somewhat a known by not known problem. The dhclient maintainer seems to think there are some edge cases left in the client.  Please describe in more detail your isp setup and what options the isp are pushing to you.

You'll need to create your own PHP and such.

this would be great for all services like web interface, snmpd, ssh. i would allow choosing which interfaces this service can listen on. should be able to be more than one or all.

Check DNS.

umm by the PPTP log, the action is allways empty, but everything else seems to work fine.

There is no sendmail. There is no GCC This is a firewall.  There are developers editions but they are designed for development.

full installs

Bah, I did what you told me to and it still didnt work. So I thought I would try something. I disabled the logging option, saved and applied the changes, and then went back into the rule and enabled logging and it works now. Go figure. Maybe it didn't save properly at first for some reason. Thank for your help though Scott.

@aldo: there are lots of setting in the wireless cards. what card are you using. i have practical experiance with atheros in pfsense and everything was better than when using mono and older card try ifconfig and see that the stats are on the wireless card check to make sure the config is the one you put into the gui. additionally try to setup wireless ssid etc from command line only and  see how it looks Thank you very much. I use card with intersil prism 2.5 chipset. Directly Z-com 626. I try command line.