@jimp said in Disable CLICOLOR in terminal: unsetenv CLICOLOR Thank you for clarifying!

@stephenw10 The -y is what I was looking for.

UPDATE: FIXED I got to mount only the zroot/ROOT/default dataset manually on another mountpoint, and BINGO, everything was there.

Closed: I manged to restore the last working configuration file. Thank you to all that took time to at least read my post. Have a great day. Glen

@stephenw10 This works in a MS Active Directory, via LDAP. My goal is connect to our Google Workspace LDAP. The pfSense Authentication and Captive Portal works, but Squid, not. I have a change "Squid Authentication Method" to Local and doesn't autenticate.

You are probably seeing an asymmetric routing issue with a multi-homed host like that. https://docs.netgate.com/pfsense/en/latest/troubleshooting/asymmetric-routing.html Check the firewall logs for blocked entries. But, yeah, connecting to https://10.108.1.99:5001 from hosts in that same subnet doesn't go through the firewall. Steve

@coffeeman007 Oh my bad - plex on the brain I guess.. Sorry!! doh!!

And / or your test client is not respecting the HSTS policy maybe?

@safia said in Natgate 6100 Problem: I do not see the windows the below window What do you see at the serial console then?

Very unlikely. As mentioned all the current work is on FreeBSD main builds. Currently that's 14. Steve

Longer route, more hops. Generally more chances to lose packets. 1.1.1.1 is an anycast address so you see replies from whatever is logically closest to you. Steve

The printer will be establishing a connection to the server outbound that is then used to send printjobs to it. It's as secure as any IoT device. You would hope more so because HP is running it, but.... The risk is that the printer connects to something that isn't HP's server and that connection allows back in more than just printjobs. That should be difficult to impossible if HP have done a good job. As always it comes down to security vs convenience. Steve

I have created and submitted a pull request for the Netgate developer team to review and merge. The request is posted here: https://github.com/pfsense/FreeBSD-ports/pull/1221. Once this is merged into the pfSense snapshot branches, a new Snort GUI package version will appear (version 4.1.6_5). It may take a bit to get merged and built because the team is quite busy prepping the upcoming new pfSense releases.

And that worked? If not then check for blocked traffic. Check the state table at both sites make sure traffic is going where you think it should. Steve

@dominikhoffmann said in Gateway has 100% WAN packet loss but is online: I can ssh into the WAN address the gateway reports, from outside of the LAN. I don't think that really answers the question. [Also, it seem strange that you would be able to ssh into the gateway?] When you look in VPN > OpenVPN > Servers, what are the Tunnel Networks? When you look in Status > Gateways, what are the addresses being monitored?

Boooo!

I mean.... I'm pretty sure that's what they are trying to do. But that doesn't rule out ineptitude! Hanlon's razor may apply.

@stephenw10 I think I either fixed this or its not my main issue...going to open a new post for my main issue

ok run into same thing ... gonna have a look into this 2.6CE brNP

You can execute commands directly using ssh if you have key based authentication setup. Like: steve@steve-NUC9i9QNX:~$ ssh root@apu "sysctl dev.amdtemp.0.core0.sensor0" dev.amdtemp.0.core0.sensor0: 54.1C You have to use root to avoid the menu. Steve