Yup, we probably need to change the wording there to make it clearer in the next version. From 2.7.1/23.09 the user needs to opt-in by selecting to new 'current stable' branch to upgrade. Steve

@stephenw10 ah ok and then no one really has answers cuz they dont see it.. i get it and the 1 offs its hard to deal with ya its confusing like it works and doesnt work go figure right nothing is perfect.... (: but i appreciate the help so far least to try to do it.. or i just stick with the VPN clients and let the wan comps connect to just the prefill cache i dunno how will it works all together i havent tested it much as its only used for prefill when i use the lancache i actually use the pfsense 192.168.0.1 and it points to to the lancache lol always learning (:

@stephenw10 i'm familiar with it all enough now so that i can get around it... as long as they don't start changing things just for the sake of changing things such that things that once worked properly/perfectly are now broken.. feels like thats going on with 2.7.1 & 2.7.2

@johnpoz I didn't actually say anything about the results. Just showing you what I'm seeing on a system with little to no other traffic and no masked IP's. the buffer bloat test as you know downloads first, then uploads. so those first captures are yes at the point that is nearing the end of uploading test here is a capture while it is still in the download phase (local filter) [image: 1702317041720-screen-shot-2023-12-11-at-12.49.40-pm-resized.png]

Well use the client as destination then. What ports is it using? If they are fixed you can include that to be more specific. But check it really is re-opening states from WAN first.

@Goosewire Wrong category… As suggested on Reddit try contacting Protectli for the boot issue. There might be something in the logs. A power outage wouldn’t log anything and would explain why the switch booted. Consider a UPS…?

@stephenw10 Thanks Stephen for confirming. Now that it is enable, I will never turn it off .

@rpotter28 yup - same here more info here https://forum.netgate.com/topic/184681/after-update-2-7-2/8?_=1702253232490 now the only package I can see that got upgraded during the 23.09.1 install was pfBlocker from _6 to _7 certainly wasn't as a result of me upgrading the package -- it was logged and is upgraded however. The repo servers became unavailable this morning a few minutes after my 23.09.1 upgrade completed.

Is that an ARM based tablet? I'm not sure the driver exists for that. You can see the USB serial device is there but no driver has been loaded for it. Did this work previously? Steve

If they are being given IPs from the LAN subnet then their DHCP broadcasts are hitting LAN. Something is bridging the LAN and VLAN9.

Ah, never saw that setting before . Changing Top Navigation to Scrolls with page fixed it. Thanks!

[image: 1702147940600-screenshot_20231209-105143.png] It appears this update enabled a dual monitor feature. It does not occur in the previous version.

@jrey said in Danger, Latency on WAN mildly loaded: Marking it as always up hides the when it really down. Before doing that, I would make sure shaping is properly set up. Follow this guide to set up CoDel. NB: Waveform can be inaccurate with high bandwidth connections. Balance it against another test like Speedtest. Speedtest doesn't give you a grade like Waveform, but it does give averages under load.

@yaboijersh said in DHCP Server not showing additonal boot options for PXE BOOT: Thanks for the help! Glad I could help!

Opened a feature request: https://redmine.pfsense.org/issues/15078

@jimp That was the issue. I found a post that said to use ctl-a d (looking now that says to disconnect) not to kill the session like ctl-a \ does). Once I cleaned up all the screen connections, I was able to get in and have changed the way I connect and disconnect. Thank you very much!!! :~# screen -ls There are screens on: 2554.pts-0.computer (11/27/2023 07:35:26 AM) (Detached) 2552.pts-0.computer (11/27/2023 07:35:06 AM) (Detached) 2550.pts-0.computer (11/27/2023 07:34:38 AM) (Detached) 2547.pts-0.computer (11/27/2023 07:34:18 AM) (Detached) 2544.pts-0.computer (11/27/2023 07:33:41 AM) (Detached) 2514.pts-0.computer (11/27/2023 07:12:56 AM) (Detached) 2511.pts-0.computer (11/27/2023 07:12:27 AM) (Detached) 2508.pts-0.computer (11/27/2023 07:11:44 AM) (Detached) 1616.pts-1.computer (11/26/2023 08:11:02 PM) (Detached) 1612.pts-1.computer (11/26/2023 08:10:05 PM) (Detached) 10 Sockets in /run/screen/S-root.

@stephenw10 I have good news and I have bad news. The good news is that I got everything working. The bad news is I don't know what I did. LOL Thanks for your help. I did check out the things you mentioned and I must have accidentally changed something. If I figure it out, I will post what I think I did.

@stephenw10 This worked like a charm! Thank you very much!

@emmaylots was having the same issue and can confirm that it works. Thank you!

I can confirm that the switches on the router mr8300 (or the router hardware itself) appear to be what is the cause behind the slowness when hardwired.