@stephenw10 tnx this is exactly what happened, and i used the solution purposed by @viragomann , which is in the end same of yours and it works fine thanks guys! You're precious as usual! Respect!

@stephenw10 Done Ted

Hmm, well there's no config option for that. Some coding would be required it looks like.

@it_ib said in Log Collector: Humio and the Falcon LogScale Collector Not seeing any FreeBSD builds that might be applicable.

If you configure notifications you should get that. You won't see a notice for shutdown but you would be upgrades and for boot-up complete. https://docs.netgate.com/pfsense/en/latest/config/advanced-notifications.html Steve

The blocked traffic you showed is on the WAN. To pass that traffic you would need to a firewall rule on the WAN. That screenshot shows a rule in LAN. However if you are trying pass the VPN traffic to the Cisco router behind pfSense you need to add a port forward. By default that will add a firewall rule for you: https://docs.netgate.com/pfsense/en/latest/nat/port-forwards.html#adding-port-forwards Steve

Hey, Sorry for the late. After the last tests I tried to map one vlan on the LAN NIC and It's OK. So the problem was either the nic used for the VLANs or the switch port used. Thanks

@stephenw10 had a backup machine I upgraded... tested and then upgraded active system. Still have a question on if backup config file should be in root of FAT32 partition or in E:\config\ -> I had it in both. Process I followed was to: change interface to em0 pre-upgrade and disable the shellcmd script. Take backup and upload to usb key Connect my Bell MTS ONT to pfSense Reboot and install new This found the config, recognized and got internet DHCP address for WAN on em0 and installed packages as there was an active internet connection. No other config changes were needed. This has been quite a journey from when I first started this thread! Glad to see my script is no longer needed.

Works ok now for some reason!

@alteredstate said in Deleted pfSense Package Settings Appear in Backup: @bmeeks What happens when I import the backup containing config settings for packages that are not installed? Will those config settings become null and void or appear in the next backup? I would like for said config settings to disappear when I import the backup. If you import a backup with those settings in it, then they will return and stay. You would have to repeat the process of installing the package again, unchecking the box to retain settings, then removing the package. You may find it easier to simply edit the config.xml file directly before importing it. If you have any familiarity with XML, then you can very quickly see how to remove the section pertaining to a given package by simply studying the layout of the config.xml file and deleting the appropriate section.

@Matt_Sharpe said in Log Rotation Issue: Another query would be, is it possible to move the /var/log partition to a dedicated disk in PFsenses? It's possible in FreeBSD but there isn't any supported way to do it in pfSense. Someone familiar how disks/partitions works in FreeBSD should be able to set it up without too much trouble, but it may also take some manual adjustments in the code since pfSense has to make a lot of assumptions in that area.

That would work. The default config for any Netgate device uses the first port as WAN. I would always recommend using that because it makes reinstalling or resetting far easier. https://docs.netgate.com/pfsense/en/latest/solutions/netgate-4200/io-ports.html#networking-ports So: Port1 = WAN Port2 = LAN Port3 = DMZ Port4 = WiFi perhaps

@stephenw10 I noticed that this happened whenever I enabled a NAT rule, so I followed this tutorial https://docs.netgate.com/pfsense/en/latest/recipes/port-forwards-from-local-networks.html and changed the NAT +Proxy for Pure NAT, and I checked both checkbox options... it worked, now logs no longer appear every 15 minutes... thanks

@mrblithe https://docs.netgate.com/pfsense/en/latest/general/plus.html

@throttlenerd electronics don't last forever, and have seen switches - especially the cheap 20 variety fail in odd ways..

@kdmiller61 said in error showing up in log: install: //boot/efi/efi/boot/INS@cJq5yv: No space left on device I followed these instructions and I appear to be good to go https://forum.netgate.com/topic/184661/unable-to-upgrade-from-2-7-1-to-2-7-2-unmounting-boot-efi-done-failed/22 Keith

In the end, the point is to have two new things; 1: varnish server to handle caching 2: fixing the haproxy configuration so that it's actually load balancing those web servers. That was an interesting find. I don't know how pfsense was sending traffic to the web servers without haproxy actually working. Maybe it automatically round robins since the servers are listed in an alias?

OpenVPN is probably easiest to setup for this from pfSense but Tailscale should work. Yes, it's probably a missing firewall rule somewhere.