@sullrich:

Reinstall via a recent snapshot.  We now have a cron job handler item that ensures check_reload_status is running.

Yes, a reinstall is required to get the new entry.

Thank you, I'm on my way to install it.

You always should try these kind of things from externally. especially such crappy protocols like ftp  ;)

The symlink from /cf/conf to /conf has been damaged.

Recreate the symlink and it will function again.

Just look at http://granados.sourceforge.net/

You have to learn C# or VB.NET before of course but if you alreay know some C/C++/java coding it won't be difficult to master C# ;-)

You can do a lot of thing with that free editor (Visual Studio clone):
http://www.icsharpcode.net/OpenSource/SD/

Alright thanks ;).

Did not notice this with the previous snapshot, and it too had it's logs
forwarded to a central syslog server. That syslog server alerts me by email of any
syslog messages that are not on a "Permited" list.

@sullven:

Also another question - if I save my config, reflash should the RRD graphs be reinstalled with the original config when "All" is selected for the backup options?

RRD-Graphs are not stored in the config.xml so you'll lose this information on backup and not overwrite this information on restore.

You'll need a vlan capable switch. Though there are nics that can handle vlans better than others most of them should do.

I am just going to mention this to make sure its covered, but make sure that you do not have the option to create NAT reflect disabled. You can find this option under System>Advanced, down on the bottom under NAT. Make sure you do not have this checkbox checked, if you want to be able to enter your public IP on your LAN side.

under status > system how many of your firewall states are full?  You may also check under states to see what they are being used on, let me know what you see there.

I see, thanks Hoba!  ;)

yeah i know and ive tried belive me. I have an dell optilex gx270 series and iwe putted 32Mb at share (the lowest) but it ignored my setting. Anyway imp. is that the problem is fixed.

best regards

@hoba:

Already implemented in the HEAD version (developement version of next major release). For now use hidden config.xml option (see http://faq.pfsense.com/index.php?action=artikel&cat=10&id=38&artlang=en&highlight=hidden ).

Following the link from FAQ:

Error: Unexpected output from cvs co:

cvs checkout: cannot open /cvsroot/pfSense/conf.default/config.xml,v: Permission denied
cvs checkout: could not read RCS file for pfSense/conf.default/config.xml

(expected "pfSense/conf.default/config.xml" but got "")

heh, eoppoe ? :)

–Bill

Use one system for everything and add a failoversystem if needed. You can setup individual DHCPs for each interface and seperate networks by firewallrules where needed.

mpd has three mtu change points
link_Mtu
link_mru
iface_mtu

all can be found in /etc/inc/vpn.inc under the pppoe function.

test first with ping to see where this needs to be before you start to set it

You can edit the snort rule to detect file transfers on any port. The only problem with using snort to block file transfers is if someone initiates a file transfer, snort will block that IP from having ANY contact to your network. So basically it will cut off the file transfer and any further IM traffic to that IP for an hour.

cmb edit: removed broken link, add text from that old page

Set the protocol to SFTP (allow SCP fallback).

Make sure you are using username root rather than admin.