No problem, glad you got it working.  :) The rehash command causes FreeBSD to rebuild the list of files reachable in the path. After installing new files via a package you need to do this FreeBSD knows where they are or you can use the absolute path when calling the command. Steve

Thank you very much.

did you try eBay?  ;)

@robi: NanoBSD it's all in the RAM running, the storage is read-only. Power fail no problem. This.

Some type of NIC aggregation might be appropriate here too. Enough of these will saturate your FSB, even though they are PCIx cards: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=251084127667

There exists a driver for lcdproc 0.4, here. It requires some rewriting for 0.5x as there were some changes made to lcdproc at that time. However: @Joris: If you rewrite it for 0.5 (which is not difficult), it can become part of the distro (0.4.4 is frozen). Some differences for 0.5: It uses a pointer that functions as a 'this' or 'self' pointer for the driver data. See other drivers and the docs (I thought this was documented already ?). Allocate a private data struct for driver variables so you can run multiple instances of the driver. You should not use the driver arguments anymore. Instead use the configfile functions. Some driver functions have been removed. Some functions have a fall-back alternative. This means that if you don't define them, LCDd will provide the functionality. Keystuff works with names instead of letters. Therefore the getkey function is now called get_key. Usually the keynames to use are read from the config file. You could try to install lcdproc 0.44 to test the driver. You would first need to compile it which might be tricky against 0.44. Steve

No, sorry.  ;) The Safenet safeXcell 1141 that came in the X-Core boxes (X500, X700 etc) should be supported. There are drivers in FreeBSD for it and it is recognised at boot but for some reason it does not work, or at least no-one has been able to make it work. That is a mini-PCI card and the X550e doesn't have a mini-PCI slot anyway. The X550e, and all the other X-Core-e models, have encryption hardware on the board in the form of a Cavium Nitrox lite chip. Unfortunately there are no drivers easily available for it. It requires propriatary binary modules to work under Linux. The X-Peak-e models had a large PCI-e VPN card with various encryption chips on it known as the 'tacoma module' that too is unsupported.  ::) Steve

Exactly. Though the console is still available for basic tasks (and for much more complex stuff!). Steve

without managment is working

Thanks, its a FESTOOL Oberfräse OF 1010 EBQ-Plus :) Thanks so much for your reply Steve! Traffic going through interfaces requires CPU usage, gotcha. If i go VLAN, it would seem all traffic go through pfSense, as I would be firewalling various subnets., gotcha. The trouble is there are so many variables that hard figures can be misleading. There are a lot of variables but then there are a lot of pfSense users. Mashing a few 10,000 tables of data together would show some commonalities i would have thought. Shame I lack statistical analytic skills, would be fun and beneficial to the community. Thanks so much again, gunna go grab some hardware! Michael

Working perfectly with all 5 Intel NICs here too!

Thats great :) Thank you… Emre.

Cool, thanks.  Was not sure if that meant hardware interrupts or no interrupts.

Very interested. I too am currently virtualizing my pfsense box but might be tempted to move to raspberry pi in an effort to reduce costs. I can't see that you'd need to have more than one network interface although it would be a nice to have. My virtual machine currently has 3 virtual nics but just one physical nic.

Exactly. Try it and see. You should be able to get your other connection working without replacing the cable by setting both ends to 100Mbps full duplex. Steve

80W should be enough but one user found it a problem (using a 60W power brick anyway). The Pentium-M 770 is almost certainly not worth it. There is a huge premium, even now years after release, and the 533MHz FSB Pentium-Ms are not supported directly by the est(4) driver so speedstep doesn't work. I don't think it supports ECC ram. Steve

You can backup the config from the old, and restore it to the new, that's works fine.