Pfsense Return to their default setting.
-
@steveits
Not a single package are updated or reinstalled. and all packages are according to their version. -
Did it boot back up?
Do you have any config backups shown in Diag > Backup/Restore > Config history?
Or stored in /conf/backup?
The only reason it would use a default config is if the current config and all previous configs somehow became invalid. Or if it was intentionally reset.
Steve
-
@stephenw10
nothing found in configuration history.I access it form default IP and restore Our backup file again -
@shakeel
and 1thing I want to confirm that ,
can I restore backup file On Broadcom Lan card ,If I take Backup with Intel lan card. -
@shakeel said in Pfsense Return to their default setting.:
can I restore backup file On Broadcom Lan card ,If I take Backup with Intel lan card.
Yes. If needed pfSense will prompt you to assign interfaces while restoring.
-
@steveits
Can you share me some steps or pic.Thanks -
@shakeel
can I run 2 Pfsesne as Active or Active and Active or Passive .
I need two Pfsense at same time in my production environment. -
@shakeel said in Pfsense Return to their default setting.:
Can you share me some steps or pic
During the restore it prompts you to pick which is LAN and which is WAN. I don't know of a web page to give you, sorry.
@shakeel said in Pfsense Return to their default setting.:
can I run 2 Pfsesne as Active or Active and Active or Passive
Yes, see
https://docs.netgate.com/pfsense/en/latest/highavailability/index.htmlI would ask about that in the HA forum though.
-
@steveits
Thanks -
When you import the config it will take you to the interfaces re-assign screen so you can assign the new interfaces before it reboots.
You can run pfSense in High Availability as Acitve-Passive:
https://docs.netgate.com/pfsense/en/latest/highavailability/index.htmlSteve
-
@stephenw10
Hi,
I am facing the Captcha issue ,when I route a traffic through my PFsense Gateway.it appear on my Browser on Every Search.it my be a google or Firefox.. Please someone here to Resolve this issue In PFsense.
-
@shakeel
https://support.google.com/websearch/thread/2596872?hl=enthis says reinstall Chrome:
https://support.google.com/chrome/thread/19766057/annoying-chrome-asks-for-captcha-every-single-time?hl=enNot sure why you think it's pfSense related? You mention "though pfSense" but are other attempts coming from the same public IP address?
-
@steveits
is it possible due to Proxy server setting like (Snort) or any other services In PFsense. -
More likely because pfSense it sending that traffic over a VPN.
A proxy on pfSense would not change the source IP.
Snort is an IDS/IPS not a proxy. Squid is an http proxy. But it's not either of those things.
Steve
-
@stephenw10
Any possible solution or how we overcome this issue in pfsense. -
Stop sending your traffic over a VPN?
-
@stephenw10
I have three public ips and configured load balancer .and I wnat to Know
Public IPS status for example
link 1 when down and when up,and how much time down. -
So.... unrelated to the previous issue with Google search?
You should open a new thread.
https://docs.netgate.com/pfsense/en/latest/multiwan/strategies.html
Steve
-
@stephenw10
but how I check their down time. -
So you want to log any down time on each gateway?
You can check the gateway logs for alarm entries it will show when a gateway is marked down and when it is back up.
