Pfsense Return to their default setting.

stephenw10

When you import the config it will take you to the interfaces re-assign screen so you can assign the new interfaces before it reboots.

You can run pfSense in High Availability as Acitve-Passive:
https://docs.netgate.com/pfsense/en/latest/highavailability/index.html

Steve

shakeel

@stephenw10
Hi,
I am facing the Captcha issue ,when I route a traffic through my PFsense Gateway.it appear on my Browser on Every Search.it my be a google or Firefox.. Please someone here to Resolve this issue In PFsense.

SteveITS

@shakeel
https://support.google.com/websearch/thread/2596872?hl=en

this says reinstall Chrome:
https://support.google.com/chrome/thread/19766057/annoying-chrome-asks-for-captcha-every-single-time?hl=en

Not sure why you think it's pfSense related? You mention "though pfSense" but are other attempts coming from the same public IP address?

shakeel

@steveits
is it possible due to Proxy server setting like (Snort) or any other services In PFsense.

stephenw10

More likely because pfSense it sending that traffic over a VPN.

A proxy on pfSense would not change the source IP.

Snort is an IDS/IPS not a proxy. Squid is an http proxy. But it's not either of those things.

Steve

shakeel

@stephenw10
Any possible solution or how we overcome this issue in pfsense.

stephenw10

Stop sending your traffic over a VPN?

shakeel

@stephenw10
I have three public ips and configured load balancer .and I wnat to Know
Public IPS status for example
link 1 when down and when up,and how much time down.

stephenw10

So.... unrelated to the previous issue with Google search?

You should open a new thread.

https://docs.netgate.com/pfsense/en/latest/multiwan/strategies.html

Steve

shakeel

@stephenw10
but how I check their down time.

stephenw10

So you want to log any down time on each gateway?

You can check the gateway logs for alarm entries it will show when a gateway is marked down and when it is back up.

A Former User

@shakeel

If this, what you are reporting here, was pointed to a power
outage, you might be perhaps als looking for a qualified
UPS unit (Uninterruptible power supply) also. It should
then be able to hold both pfSense firewalls if you run a
active/passive setup. Try tog et the same box again
might be also nice for narrow down troubleshooting.