Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Using a GRE Tunnel to route VMs network and IP to external network.

    Scheduled Pinned Locked Moved General pfSense Questions
    36 Posts 2 Posters 4.9k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • XuapX
      Xuap @Xuap
      last edited by

      If I ping something like 1.1.1.1, on the console I get
      6c3d5da9-efd4-437e-8d84-c760fdefcd79-image.png
      without any output, but I do get the states on both ends
      LOCAL:
      221211db-5d97-46a3-872a-04dd3fd77c61-image.png

      REMOTE:
      42dc6e6d-0437-443f-9b5f-ff785494b7b9-image.png

      also referring that it's showing the ip 185.113.141.132 when the IP I want to use is the 185.113.141.139.

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        Ok, so what's the 1:1 NAT rule at the remote side? It looks like it's not catching the traffic there on the way out and it's using the auto outbound rule instead.
        Also the 1:1 NAT rule would not change the source port (icmp ID here) like is shown there.

        However it does look to be working as expected apart from that. There is two way traffic shown on all 4 interfaces involved. But the ping fails?

        Steve

        XuapX 1 Reply Last reply Reply Quote 0
        • XuapX
          Xuap @stephenw10
          last edited by

          @stephenw10 The NAT rules on the remote site are like this:

          1:1
          475677e5-4214-4e4e-b611-55973f5b02f6-image.png

          Outbound
          5a5b6fb3-7c54-4697-b61a-3499629693bb-image.png

          Yeah, basically it just doesn't have internet access, nor even access to the pfsense or tunnel ping.. I can't ping the tunnel through the VM even tho the ping arrives there.

          1 Reply Last reply Reply Quote 0
          • stephenw10S
            stephenw10 Netgate Administrator
            last edited by

            Ok the 1:1 NAT rule should be on WAN with the external IP being the public IP VIP and the internal IP being the private IP of the server.

            XuapX 1 Reply Last reply Reply Quote 0
            • XuapX
              Xuap @stephenw10
              last edited by

              @stephenw10 So, like this?
              c6187a6d-ca16-44d6-a4e3-28daa7645360-image.png

              And on the VM, like this?
              489184d9-f0b5-4787-b6f7-3734c69eb06f-image.png

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                No the external IP should be the public IP. The internal IP should be the server IP in 192.168.1.0/24.

                The VM gateway needs to be in the subnet so it should be the local pfSense VLAN interface IP. Probably 192.168.1.1

                XuapX 1 Reply Last reply Reply Quote 0
                • XuapX
                  Xuap @stephenw10
                  last edited by

                  @stephenw10 So, my networks on local pfsense are like this:

                  7167937f-2f66-45c0-834b-a080d152ce26-image.png

                  My WAN is the 192.168.1.10 which is on the main gateway of the router 192.168.1.254

                  I use the VLAN as a bridge for the VMs, but should I use something else both on pfsense or on the VMs?

                  XuapX 1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    Hmm, where is the VM at 192.168.1.86 then?

                    I expect all the VMs to be in the VLAN subnet and all the routing the NAT setup to be to and from the VLAN subnet.

                    Steve

                    XuapX 1 Reply Last reply Reply Quote 0
                    • XuapX
                      Xuap @Xuap
                      last edited by

                      I also did a pcap on both the GRE and VLAN of the local pfsense

                      GRE:
                      d14dbcf6-36b0-4e74-bf2d-eb48e440fa4e-image.png

                      VLAN:
                      f19055c3-ebf6-4091-b462-8ac72173b942-image.png

                      So, as I understood it is sending the ping to the 1.1.1.1 but it is not receiving any traffic..

                      stephenw10S 1 Reply Last reply Reply Quote 0
                      • stephenw10S
                        stephenw10 Netgate Administrator @Xuap
                        last edited by

                        Right, well it won't if traffic from 192.168.1.86 is coming in on the wrong interface!

                        If you run a pcap on WAN you will see all the replies going back that way because that's where the 192.168.1.0/24 subnet is.

                        How exactly is the VM connected?

                        XuapX 1 Reply Last reply Reply Quote 0
                        • XuapX
                          Xuap @stephenw10
                          last edited by

                          @stephenw10 The VM is in the proxmox with the IP on 192.168.1.86 and gateway 192.168.2.1 like I showed above

                          The VM is with the bridge of the VLAN (192.168.2.1) which is the Linux Bridge 1 on proxmox (vmbr1) that will (supposedly) be attached to all VMs so it can tunnel the traffic to the remote pfsense

                          1 Reply Last reply Reply Quote 0
                          • XuapX
                            Xuap @stephenw10
                            last edited by

                            @stephenw10 16249c88-5c5c-499c-8067-7e1321555bac-image.png

                            This is the only 1.1.1.1 ping I have on the WAN of the local pfsense

                            1 Reply Last reply Reply Quote 0
                            • stephenw10S
                              stephenw10 Netgate Administrator
                              last edited by

                              There is an ARP request for 192.168.1.86 though because it's trying to find it on the WAN. And failing.

                              The VMs should be in the VLAN subnet, 192.168.2.0/24.

                              The static route at the remote end should be for that subnet.

                              The 1:1 NAT rules at the remote side should also be for host in that subnet.

                              Steve

                              XuapX 1 Reply Last reply Reply Quote 0
                              • XuapX
                                Xuap @stephenw10
                                last edited by

                                @stephenw10 So, like this?

                                8d412b2e-cc2e-4ae2-af56-207db7d0cc09-image.png
                                2e9705b1-00cb-4abb-825d-211ac6e37fa8-image.png
                                9a1a6a0a-5063-4887-9df4-4ba4b4ead7ce-image.png

                                XuapX 1 Reply Last reply Reply Quote 0
                                • XuapX
                                  Xuap @Xuap
                                  last edited by

                                  Ok, so It looks like I was using a 192.168.1.86 on a .2 subnet, I changed it to 192.168.2.86 and it now pings 1.1.1.1 and 8.8.8.8 and the tunnel, but doesn't have internet access to like ifconfig.me or google.com. I'll do a bit more testing, but it's closer than never to work out.

                                  1 Reply Last reply Reply Quote 0
                                  • stephenw10S
                                    stephenw10 Netgate Administrator
                                    last edited by

                                    Yeah you need to be using 192.168.2.X everywhere.

                                    You are probably seeing pings work but no other traffic because there is some asymmetry somewhere. Once all the rules and routes are changed to the VLAN subnet it should work.

                                    XuapX 1 Reply Last reply Reply Quote 0
                                    • XuapX
                                      Xuap @stephenw10
                                      last edited by

                                      @stephenw10 Ok, it is pinging now. I can ping everything on IP addresses, except domains. Like, If I ping my Home Public IP address, I get a ping of 20ms or something, when the tunnel's ping is about 9ms.

                                      But is it normal the ping state is 0:0 on both ends?

                                      Local:
                                      1cb08819-1b8b-4ac5-a45b-dfbe311348f1-image.png

                                      Remote:
                                      80fcbc34-bdfe-4b60-b3d2-91adf9b2b878-image.png

                                      Also the only NAT rules I have are on the remote pfsense, which are:
                                      ff35e59a-2ab5-4dfb-a6b2-81dc147ac867-image.png

                                      On the local pfsense I have the NAT disabled.

                                      What rules should I change/add?

                                      XuapX stephenw10S 2 Replies Last reply Reply Quote 0
                                      • XuapX
                                        Xuap @Xuap
                                        last edited by

                                        Also, traceroutes only give * * * * back:

                                        27620e86-8dd4-4046-bfaa-bb66713b3f4d-image.png

                                        1 Reply Last reply Reply Quote 0
                                        • stephenw10S
                                          stephenw10 Netgate Administrator @Xuap
                                          last edited by

                                          @xuap said in Using a GRE Tunnel to route VMs network and IP to external network.:

                                          But is it normal the ping state is 0:0 on both ends?

                                          Yes. icmpv4 doesn't have a state.

                                          You should still have 1:1 NAT rules on the remote pfSense. With that you wouldn't need the outbound NAT rule, the 1:1 does that already.
                                          And you need the 1:1 rule if you want inbound connections the VM to work. Or add port forwards for each connection you need but 1:1 does it all.

                                          Steve

                                          XuapX 1 Reply Last reply Reply Quote 0
                                          • XuapX
                                            Xuap @stephenw10
                                            last edited by

                                            @stephenw10 So, I can remove the NAT Rules and set NAT as automatic because 1:1 Mapping does all those rules already?

                                            Also, I want to use inbound connections too, for that, I do need that rule mentioned above, or what should I do?

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.