TL-WN727N as WAN interface

bavcon22

@stephenw10 Here it is reply from your command for my WWAN interface on pfSense+ 22.05:

rtwn0_wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	description: WWAN
	ether 7c:c2:c6:00:71:d0
	inet6 fe80::7ec2:c6ff:fe00:71d0%rtwn0_wlan0 prefixlen 64 scopeid 0xb
	inet 192.168.0.101 netmask 0xffffff00 broadcast 192.168.0.255
	groups: wlan
	ssid TP-Link_6C64 channel 11 (2462 MHz 11g ht/20) bssid 1c:61:b4:1e:6c:64
	regdomain FCC country US anywhere -ecm authmode WPA2/802.11i -wps
	-tsn privacy ON deftxkey UNDEF
	AES-CCM 2:128-bit powersavemode OFF powersavesleep 100 txpower 30
	txpowmax 50.0 -dotd rtsthreshold 2346 fragthreshold 2346 bmiss 7
	11b     ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
	11g     ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
	11ng    ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
	scanvalid 60 -bgscan bgscanintvl 300 bgscanidle 250
	roam:11b     rssi    7dBm rate  1 Mb/s
	roam:11g     rssi    7dBm rate  5 Mb/s
	roam:11ng    rssi    7dBm  MCS  1    
	-pureg protmode OFF ht20 htcompat ampdu ampdulimit 64k
	ampdudensity 16 amsdu shortgi htprotmode RTSCTS -puren -smps -rifs
	-stbc -ldpc -uapsd -vht -vht40 -vht80 -vht160 -vht80p80 wme -burst
	-dwds roaming MANUAL bintval 100
	AC_BE cwmin  4 cwmax 10 aifs  3 txopLimit   0 -acm ack
	      cwmin  4 cwmax 10 aifs  3 txopLimit   0 -acm
	AC_BK cwmin  4 cwmax 10 aifs  7 txopLimit   0 -acm ack
	      cwmin  4 cwmax 10 aifs  7 txopLimit   0 -acm
	AC_VI cwmin  3 cwmax  4 aifs  2 txopLimit  94 -acm ack
	      cwmin  3 cwmax  4 aifs  2 txopLimit  94 -acm
	AC_VO cwmin  2 cwmax  3 aifs  2 txopLimit  47 -acm ack
	      cwmin  2 cwmax  3 aifs  2 txopLimit  47 -acm
	parent interface: rtwn0
	media: IEEE 802.11 Wireless Ethernet MCS mode 11ng
	status: associated
	nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>

I saw that interface is connected with 11g, but the WiFi module (TL-WN727N) and the device M7350 has 11n network capability and the distance is less then 1m one device from another.
Sincerely yours

NightlyShark

@bavcon22 I know this is a long shot, but, cloud it be inserted in a USB 1.1 port by any chance? Or have a USB controller run in 1.1 speed? Again, I know it is a long shot.

bavcon22

Speed test results:
Screenshot from 2023-02-19 20-39-43.png

NightlyShark

@bavcon22

bavcon22

@nightlyshark The WiFi module is connected to Lenovo ThinkCentre M9xp (x is an number) to USB 3.0 port. Is the USB 3.0 a problem the wifi device is USB 2.0?

NightlyShark

@bavcon22 It is a problem if the port drops to 1.1. I don't know if this can be caused by a rusted connector, driver (both controller and chipset) or something...

NightlyShark

@bavcon22 said in TL-WN727N as WAN interface:

Lenovo ThinkCentre M9xp

Do you need any OEM chipset (more like, on-CPU-controller) drivers for the AMD Lenovo-specific (most likely), CPU?

stephenw10

Hmm, I don't have one I can test in station mode. In hostap mode though the Status > Interfaces page does show the link 'Rate'. Do you see that?

NightlyShark

@stephenw10 Maybe you can whip-up a VM in a PC, pass-trough a USB controller and test it from there?

bavcon22

@nightlyshark The PC has USB 2.0 connectors I will try it. Next weekend I have intent to update my pfsense+ 12.05 to 13.01 and then I will give the feedback in this forum.

NightlyShark

@stephenw10 Sorry, replied to the wrong answer.

bavcon22

@bavcon22 Speedtest results with USB 2.0 PC port:
Screenshot from 2023-02-19 21-05-40.png

No better results.
Thank you for all, I will see if any better results with newer version of pfSense+ afrer I will update the software.

NightlyShark

@bavcon22 There is always the case that the adapter has some damaged component that causes it to drop to a USB 1.1 mode, or just be like that from factory (highly unlikely).

bavcon22

@nightlyshark I will try to connect this dongle tp-link tl-wn727n to Raspberry Pi to "see" if the device actually work with 11n connection with different OS's and than report back what I will find.

bavcon22

@bavcon22 I tested the dongle on PC x86 x64 with Linux mint OS.
Testing specs:

OS: Linux mint 21.1 cinnamon
PC: Acer Aspire 5 A515-45-R5X9
USB: dongle conected to USB3 on PC, USB2 on dongle
Connection: via Android phone or home wifi
Conected: LAN
Speedtest results ~30Mbit simetric on bought wifi devices.

I think the dongle is capable of 11n transmission.

stephenw10

Were you able to see what the reported connection 'rate' was in pfSense?

NightlyShark

@bavcon22 Judging from my bad experiences with TP-Link Wi-Fi adapters, maybe try another adapter? 30 Mbits is still pretty low. I owned such an adapter, and I had to manually resolder the antenna connections (many years ago, though). My point is, they are unreliable and unpredictable.

bavcon22

Now I tested dongle with the upgraded pfSense+ v. 13.01 and FreeBSD 14 and the connection was 11g not 11n. Speed test gives me 10Mbits symmetric. My conclusion is not to buy this version of dongle for FreeBSD OS, it is not fully supported.
Before I buy it, I consulted the FreeBSD hardware and I saw the TL-WN727N that is supported in FreeBSD 13 but I missed crucial information v.3.0 is supported not my version of dongle, my dongle is v.5.2. I will use it for my other project.

bavcon22

@nightlyshark Hi in have a maximum speed of around 100Mbits DOWN 50Mbits UP, I know it is not great.

bavcon22

@stephenw10 What is command in Linux mint like the command ifconfig -vvv in pfSense? In test I done the command ifconfig -v and I was able to see only WiFi bandwidth and it was 20MHz the connection 11n was not mentioned.