Unable to register token

[bavcon22]

Max gives me the solution.

1. go to store and buy new pfsense+ Home licence
2. get two mail, first is receipt of your purchased licence, second is your new token
3. login in to your pfsense+ web gui an go to System --> Register and insert your new token in the text box near text Activation token
4. on displayed page click Register
   and you are done.

Page response is like in this image:

Go to in Update tab and you'll see data like in this image:

If not the registration was not successful.

Go to Package Manager --> Available Packages to see if the all packages are displayed, like in image:

The image does not display all of listed packages.

If all is like in images, you have successfully updated your pfsense+ licence

[stephenw10]

Ah, Ok, so the old registration was just no longer valid.

[bavcon22]

@stephenw10 It was like that, but I don't know what was the reason for this to happen. Thank you for your help and assistance.

[bavcon22]

@stephenw10 I lost my licence and packets again.

[stephenw10]

Do you see a different NDI?

The NDI you referenced previously hasn't checked in since April 9th.
What hardware is this running on?

[bavcon22]

@stephenw10 It is Lenovo TC M93p

[stephenw10]

You want to send me the new NDI in chat?

Or if it hasn't changed there must be some other reason it's not pulling in a current cert. Like no default route or trying to use an invalid IPv6 route etc.

[bavcon22]

@stephenw10 OK,send me a private chat. The only think that can be a problem is double WAN interface but is configured in fail over mode and not in load balancing mode. Can this double WAN be a problem for licence?

[stephenw10]

No, config changes will not change that. The package update system does not care about the source IP.

[bavcon22]

@stephenw10

[23.01-RELEASE][admin@homerouter.bavcon.eu]/root: ifconfig -a
re0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
	description: LAN1
	options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
	ether b0:a7:b9:54:7d:db
	inet6 fe80::b2a7:b9ff:fe54:7ddb%re0 prefixlen 64 scopeid 0x1
	media: Ethernet autoselect (1000baseT <full-duplex,master>)
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
em0: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	description: WAN
	options=481209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,VLAN_HWFILTER,NOMAP>
	ether 6c:0b:84:68:b1:ad
	inet6 fe80::6e0b:84ff:fe68:b1ad%em0 prefixlen 64 scopeid 0x2
	inet 192.168.64.100 netmask 0xffffff00 broadcast 192.168.64.255
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
re1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
	description: LAN2
	options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
	ether b0:a7:b9:54:7d:e5
	inet6 fe80::b2a7:b9ff:fe54:7de5%re1 prefixlen 64 scopeid 0x3
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
re2: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
	description: LAN
	options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
	ether a0:a3:f0:15:0a:18
	inet6 fe80::a2a3:f0ff:fe15:a18%re2 prefixlen 64 scopeid 0x4
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
re3: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
	description: LAN3
	options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
	ether b0:a7:b9:54:72:f4
	inet6 fe80::b2a7:b9ff:fe54:72f4%re3 prefixlen 64 scopeid 0x5
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
	inet 127.0.0.1 netmask 0xff000000
	groups: lo
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
enc0: flags=0<> metric 0 mtu 1536
	groups: enc
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
pfsync0: flags=0<> metric 0 mtu 1500
	groups: pfsync
pflog0: flags=100<PROMISC> metric 0 mtu 33152
	groups: pflog
ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	description: WAN2
	ether ba:a2:43:65:96:96
	inet6 fe80::b8a2:43ff:fe65:9696%ue0 prefixlen 64 scopeid 0xa
	inet 192.168.0.20 netmask 0xffffff00 broadcast 192.168.0.255
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
bridge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	description: DMZbridge
	ether 58:9c:fc:10:ff:a3
	inet 192.168.45.2 netmask 0xffffff00 broadcast 192.168.45.255
	id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
	maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
	root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
	member: re3 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
	        ifmaxaddr 0 port 5 priority 128 path cost 55
	groups: bridge
	nd6 options=1<PERFORMNUD>
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	description: LANbridge
	ether 58:9c:fc:00:04:4e
	inet 192.168.40.2 netmask 0xffffff00 broadcast 192.168.40.255
	id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
	maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
	root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
	member: re1 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
	        ifmaxaddr 0 port 3 priority 128 path cost 55
	member: re0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
	        ifmaxaddr 0 port 1 priority 128 path cost 55
	member: re2 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
	        ifmaxaddr 0 port 4 priority 128 path cost 55
	groups: bridge
	nd6 options=1<PERFORMNUD>
ovpnc1: flags=8010<POINTOPOINT,MULTICAST> metric 0 mtu 1500
	options=80000<LINKSTATE>
	groups: tun openvpn
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

Picture from widget:

[stephenw10]

You have a USB NIC there, ue0, did you add that recently?

Hmm that should be ignored though.

[bavcon22]

@stephenw10 The ue0 it is GSM to Wifi modem connected to pfsense + via USB cable. In the past I have issue with that modem, that device stops communication and went unresponsive. I disconnect the device from USB (actually from pfsense) and press power button to initiate the hard power down. When modem come up and running again I connected to USB again and tested the connection. When the pfsense was v. 22.05 that was not a problem. The licence I lost yesterday afternoon. The first time I connect the modem to pfsense was when I wrote the article on forum about that TP-Link modem. It was February 10th 2023.

[stephenw10]

The last time the old NDI requested a cert update coincides with that so I'd say that's almost certainly what changed it.

[bavcon22]

@stephenw10 What's the next step to get working again? Re licencing on web page again with newest NID or register with NID from 19days ago?

[bavcon22]

@bavcon22 Solution is to order another home Licence for pfsense+. It Would Be Nice if the licence will not be lost when the hardware changed.