Report a Bug.

[e0x]

@rcoleman-netgate Hi! Thanks. I installed 2.7 and I get this error. Con you help me? Thank you very much again. All the best.

[rcoleman-netgate]

@e0x Did you install from the ISO? If so install again.

If not install from the ISO and restore from the backup you took before upgrading.

[e0x]

@rcoleman-netgate Thank you very much. I reinstalled 2.6 downloaded the configuration file and did a clean installation of 2.7, still with that same screen. So the question is : How do I do the restore? Could you explain to me the steps to follow? Thank you very much again. Best regards.

[stephenw10]

What is this hardware? The boot log shows 32 phys. Is that real?

It's also using a dc(4) NIC which is ancient and that appears to be where the crash was:
Backtrace:

db:0:kdb.enter.default>  bt
Tracing pid 488 tid 100123 td 0xfffffe00ce704e40
kdb_enter() at kdb_enter+0x32/frame 0xfffffe008cb8a240
vpanic() at vpanic+0x183/frame 0xfffffe008cb8a290
panic() at panic+0x43/frame 0xfffffe008cb8a2f0
trap_fatal() at trap_fatal+0x409/frame 0xfffffe008cb8a350
trap_pfault() at trap_pfault+0x4f/frame 0xfffffe008cb8a3b0
calltrap() at calltrap+0x8/frame 0xfffffe008cb8a3b0
--- trap 0xc, rip = 0xffffffff806bde2b, rsp = 0xfffffe008cb8a480, rbp = 0xfffffe008cb8a490 ---
dc_hash_maddr_21143() at dc_hash_maddr_21143+0x9b/frame 0xfffffe008cb8a490
if_foreach_llmaddr() at if_foreach_llmaddr+0x5b/frame 0xfffffe008cb8a4e0
dc_setfilt() at dc_setfilt+0x15c/frame 0xfffffe008cb8a540
dc_ioctl() at dc_ioctl+0xee/frame 0xfffffe008cb8a580
if_addmulti() at if_addmulti+0x41c/frame 0xfffffe008cb8a620
in6_joingroup_locked() at in6_joingroup_locked+0x1f3/frame 0xfffffe008cb8a6f0
in6_joingroup() at in6_joingroup+0x4f/frame 0xfffffe008cb8a730
in6_update_ifa() at in6_update_ifa+0xf87/frame 0xfffffe008cb8a8b0
in6_ifattach() at in6_ifattach+0x5ff/frame 0xfffffe008cb8aa30
in6_if_up() at in6_if_up+0x7e/frame 0xfffffe008cb8aa70
if_up() at if_up+0x49/frame 0xfffffe008cb8aab0
ifhwioctl() at ifhwioctl+0xd84/frame 0xfffffe008cb8abc0
ifioctl() at ifioctl+0x944/frame 0xfffffe008cb8acc0
kern_ioctl() at kern_ioctl+0x257/frame 0xfffffe008cb8ad30
sys_ioctl() at sys_ioctl+0x12c/frame 0xfffffe008cb8ae00
amd64_syscall() at amd64_syscall+0x109/frame 0xfffffe008cb8af30
fast_syscall_common() at fast_syscall_common+0xf8/frame 0xfffffe008cb8af30
--- syscall (54, FreeBSD ELF64, ioctl), rip = 0x8284daf5a, rsp = 0x820b29108, rbp = 0x820b29170 ---

Panic:

miibus1: mii_mediachg: can't handle non-zero PHY instance 3
miibus1: mii_mediachg: can't handle non-zero PHY instance 2
miibus1: mii_mediachg: can't handle non-zero PHY instance 1
<6>nfe0: link state changed to DOWN
<118>done.
<118>Configuring WAN interface...
dc0: dc_netcfg_wait: failed to force tx to idle state
<6>dc0: link state changed to UP


Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address	= 0x50
fault code		= supervisor write data, page not present
instruction pointer	= 0x20:0xffffffff806bde2b
stack pointer	        = 0x28:0xfffffe008cb8a480
frame pointer	        = 0x28:0xfffffe008cb8a490
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 488 (php-cgi)
rdi: fffff800057e1508 rsi:                6 rdx:                4
rcx:                0  r8:                6  r9:                0
rax:               14 rbx: fffffe0083398000 rbp: fffffe008cb8a490
r10:                0 r11:               63 r12:                0
r13: fffffe0083397000 r14: fffffe0083398000 r15: ffffffff806bdd90
trap number		= 12
panic: page fault
cpuid = 0
time = 1689507968
KDB: enter: panic

Did it actually complete the install in either 2.6 or 2.7?

I would try replacing or removing the dc NIC if you can.

Steve

[e0x]

@stephenw10

@stephenw10 said in Report a Bug.:

What is this hardware?

@stephenw10 said in Report a Bug.:

I would try replacing or removing the dc NIC if you can.

Ok. I will be back to report if everything is working, thank you very much.

[stephenw10]

But is this a desktop device? A networking appliance? This is the boot log looks all wrong:

nfe0: <NVIDIA nForce MCP61 Networking Adapter> port 0xc080-0xc087 mem 0xeedfd000-0xeedfdfff irq 20 at device 7.0 on pci0
miibus1: <MII bus> on nfe0
rlphy0: <RTL8201L 10/100 media interface> PHY 0 on miibus1
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy1: <RTL8201L 10/100 media interface> PHY 1 on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy2: <RTL8201L 10/100 media interface> PHY 2 on miibus1
rlphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy3: <RTL8201L 10/100 media interface> PHY 3 on miibus1
rlphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy4: <RTL8201L 10/100 media interface> PHY 4 on miibus1
rlphy4:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy5: <RTL8201L 10/100 media interface> PHY 5 on miibus1
rlphy5:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy6: <RTL8201L 10/100 media interface> PHY 6 on miibus1
rlphy6:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy7: <RTL8201L 10/100 media interface> PHY 7 on miibus1
rlphy7:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy8: <RTL8201L 10/100 media interface> PHY 8 on miibus1
rlphy8:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy9: <RTL8201L 10/100 media interface> PHY 9 on miibus1
rlphy9:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy10: <RTL8201L 10/100 media interface> PHY 10 on miibus1
rlphy10:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy11: <RTL8201L 10/100 media interface> PHY 11 on miibus1
rlphy11:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy12: <RTL8201L 10/100 media interface> PHY 12 on miibus1
rlphy12:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy13: <RTL8201L 10/100 media interface> PHY 13 on miibus1
rlphy13:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy14: <RTL8201L 10/100 media interface> PHY 14 on miibus1
rlphy14:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy15: <RTL8201L 10/100 media interface> PHY 15 on miibus1
rlphy15:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy16: <RTL8201L 10/100 media interface> PHY 16 on miibus1
rlphy16:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy17: <RTL8201L 10/100 media interface> PHY 17 on miibus1
rlphy17:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy18: <RTL8201L 10/100 media interface> PHY 18 on miibus1
rlphy18:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy19: <RTL8201L 10/100 media interface> PHY 19 on miibus1
rlphy19:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy20: <RTL8201L 10/100 media interface> PHY 20 on miibus1
rlphy20:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy21: <RTL8201L 10/100 media interface> PHY 21 on miibus1
rlphy21:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy22: <RTL8201L 10/100 media interface> PHY 22 on miibus1
rlphy22:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy23: <RTL8201L 10/100 media interface> PHY 23 on miibus1
rlphy23:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy24: <RTL8201L 10/100 media interface> PHY 24 on miibus1
rlphy24:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy25: <RTL8201L 10/100 media interface> PHY 25 on miibus1
rlphy25:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy26: <RTL8201L 10/100 media interface> PHY 26 on miibus1
rlphy26:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy27: <RTL8201L 10/100 media interface> PHY 27 on miibus1
rlphy27:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy28: <RTL8201L 10/100 media interface> PHY 28 on miibus1
rlphy28:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy29: <RTL8201L 10/100 media interface> PHY 29 on miibus1
rlphy29:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy30: <RTL8201L 10/100 media interface> PHY 30 on miibus1
rlphy30:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy31: <RTL8201L 10/100 media interface> PHY 31 on miibus1
rlphy31:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
<6>nfe0: Ethernet address: bc:5f:f4:7b:8d:ff

It sees 32 Realtek PHYs on that nfe MAC. I've never seen anything like that and it's hard to imagine it's accurate. I assume this does not have 32 Ethernet ports?

[e0x]

@stephenw10

@stephenw10 said in Report a Bug.:

I assume this does not have 32 Ethernet ports?

Only 2.

@stephenw10 said in Report a Bug.:

But is this a desktop device?

Yes.

[stephenw10]

Ok, then both those NICs appear to be buggy but the dc(4) driver is known to have issues so I'd replace that first.

[e0x]

@stephenw10 The ENF656-ESW-NDPR V1.1 will be ok?

[stephenw10]

That looks like a 56K modem, so almost certainly not what you want and it probably not supported anyway.

[e0x]

@stephenw10 RTL8139D(L)?

[e0x]

@stephenw10 I have a very old computer for this, can I put a link for a store from my country for best help? I don't know if put a link of an online store is accepted here, so I ask just in case.

[stephenw10]

That will probably work but it's still an old NIC that isn't really that great.

Use Intel based NICs if you possibly can.

[e0x]

@stephenw10 Only find intel ether Express Pro100 Smart adaptor for a reasonable price.

[stephenw10]

Well that probably would work but it's also an old 100M NIC.

[e0x]

@stephenw10 thanks, but I have only 50 mb of internet, so I suppose is ok, not?

[stephenw10]

Probably be fine then.

[e0x]

@stephenw10 Also found bic2se Model 315-0610020esa, but I don't find any documentation for that card.

[stephenw10]

Yeah, I have no idea if that would work. And it's SFP so added complexity. And possibly fibre channel only which wouldn't work.

[e0x]

@stephenw10 the NC3121?