Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Netgate 2100 micro sim + 4G LTE / 5G

    Scheduled Pinned Locked Moved Hardware
    63 Posts 9 Posters 6.7k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      mphodge
      last edited by

      I have a 2100 with sim slot.

      Which way is the micro sim supposed to be inserted into the slot?

      The manual says nothing!

      N 1 Reply Last reply Reply Quote 1
      • N
        netboy @mphodge
        last edited by

        @mphodge Too complicated. I gave up

        1 Reply Last reply Reply Quote 0
        • stephenw10S
          stephenw10 Netgate Administrator
          last edited by

          With the contacts on top and the chamfered corner inward. So:

          2100-SIM.jpg

          Steve

          M 1 Reply Last reply Reply Quote 1
          • M
            mphodge @stephenw10
            last edited by

            @stephenw10 nice one, thanks!
            I must have spent several hours trying to find that vital bit of information. Even the original manufacturer's website says nothing.

            1 Reply Last reply Reply Quote 0
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              The chamfered corner should prevent you inserting it any other way but if you use enough force.... 😉

              1 Reply Last reply Reply Quote 0
              • M
                mphodge
                last edited by

                Ok so I have my SIM inserted now :-)

                I have my M.2 modem installed, which shows as:

                ugen0.2: <Sierra Wireless, Incorporated EM7455> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)

                When I go to create a PPP interface, how do I know which device it is?
                /dev/cuau0
                /dev/cuaU0.0
                /dev/cuaU0.1
                /dev/cuaU0.2

                I assumed the last one, created the PPP and assigned it to WAN. Now under Interfaces on the Dashboard, WAN shows with a green up-arrow with Uptime: n/a. Under the Cellular widget I see 4 green bars next to WAN, Status up, Carrier: No Service.

                I know the SIM works fine as I just tested it in a mobile phone.
                What am I missing?

                1 Reply Last reply Reply Quote 0
                • stephenw10S
                  stephenw10 Netgate Administrator
                  last edited by

                  Check the ppp log. Is it actually connecting to anything? Seeing a response?

                  I expect it to be on cuaU0.2 yes. You can check that from the CLI if is not already using the port (you'd have to disable it) like:

                  [admin@6100-2.stevew.lan]/root: cu -l cuaU0.2
Connected
at
OK
ati
Manufacturer: Sierra Wireless, Incorporated
Model: EM7455
Revision: SWI9X30C_02.08.02.00 r5428 CARMD-EV-FRMWR2 2016/01/06 20:38:53
MEID: XXXXXXXXXXXX...

                  If the log shows a response there then there's no need to check that.

                  1 Reply Last reply Reply Quote 0
                  • M
                    mphodge
                    last edited by

                    I get this:

                    [23.09.1-RELEASE][root@pfSense.home.arpa]/var/log: cu -l cuaU0.2
                    Connected
                    at
                    OK
                    ati
                    Manufacturer: Sierra Wireless, Incorporated
                    Model: EM7455
                    Revision: SWI9X30C_02.38.00.00 rE3F3E55C03AE94 jenkins 2022/01/13 05:16:00
                    MEID: 35399007355869
                    IMEI: 353990073558699
                    IMEI SV: 22
                    FSN: LF641313650210
                    +GCAP: +CGSM
                    OK

                    In the ppp.log I get multiples of:

                    Apr 10 12:36:45 pfSense ppp[69699]: Label 'MomIdentGeneriicc' not found
                    Apr 10 12:36:45 pfSense ppp[69699]: [wan_link0] CHAT: line 358: label "MomIdentGeneriicc" not found
                    Apr 10 12:36:45 pfSense ppp[69699]: [wan_link0] MODEM: chat script failed
                    Apr 10 12:36:45 pfSense ppp[69699]: [wan_link0] Link: DOWN event
                    Apr 10 12:36:45 pfSense ppp[69699]: [wan_link0] LCP: Down event
                    Apr 10 12:36:45 pfSense ppp[69699]: [wan_link0] Link: reconnection attempt 4497 in 1 seconds
                    Apr 10 12:36:46 pfSense ppp[69699]: [wan_link0] Link: reconnection attempt 4497

                    Where is that label from?

                    1 Reply Last reply Reply Quote 0
                    • stephenw10S
                      stephenw10 Netgate Administrator
                      last edited by

                      Ok so the port looks good.

                      You should remove or disable the cellular package. It doesn't work with the Sierra devices as it requires two AT ports.

                      How do you have the ppp link configured? You may need a custom INIT string, I use: &F&C1&D2E0S0=0${temp}

                      1 Reply Last reply Reply Quote 0
                      • M
                        mphodge
                        last edited by stephenw10

                        Ok I removed the cellular package and changed the init string.

                        It tries to work, but doesn't stay up...

                        Apr 10 14:29:47 pfSense ppp[79038]: process 79038 started, version 5.9
Apr 10 14:29:47 pfSense ppp[79038]: web: web is not running
Apr 10 14:29:47 pfSense ppp[79038]: [wan] Bundle: Interface ng0 created
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] Link: OPEN event
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: Open event
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: state change Initial --> Starting
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: LayerStart
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] CHAT: +CGDCONT=1,"IP","data.lycamobile.co.uk"
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] CHAT: Detected Custom modem.
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] CHAT: Dialing server at *99#...
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] CHAT: ATDT*99#
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] CHAT: Connected at 150000000.
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] MODEM: chat script succeeded
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] Link: UP event
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: Up event
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: state change Starting --> Req-Sent
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: SendConfigReq #1
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   ACFCOMP
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   PROTOCOMP
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   ACCMAP 0x000a0000
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   MRU 1500
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   MAGICNUM 0x509fda6c
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: rec'd Configure Request #2 (Req-Sent)
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   ACCMAP 0x00000000
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   AUTHPROTO CHAP MD5
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   MAGICNUM 0x04d26544
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   PROTOCOMP
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   ACFCOMP
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: SendConfigAck #2
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   ACCMAP 0x00000000
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   AUTHPROTO CHAP MD5
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   MAGICNUM 0x04d26544
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   PROTOCOMP
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   ACFCOMP
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: state change Req-Sent --> Ack-Sent
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: rec'd Configure Ack #1 (Ack-Sent)
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   ACFCOMP
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   PROTOCOMP
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   ACCMAP 0x000a0000
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   MRU 1500
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   MAGICNUM 0x509fda6c
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: state change Ack-Sent --> Opened
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: auth: peer wants CHAP, I want nothing
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: LayerUp
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: rec'd Discard Request #3 (Opened)
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] CHAP: rec'd CHALLENGE #1 len: 35
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   Name: "UMTS_CHAP_SRVR"
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] CHAP: Using authname "lmuk"
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] CHAP: sending RESPONSE #1 len: 25
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] CHAP: rec'd SUCCESS #1 len: 4
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: authorization successful
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] Link: Matched action 'bundle "wan" ""'
Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] Link: Join bundle "wan"
Apr 10 14:29:47 pfSense ppp[79038]: [wan] Bundle: Status update: up 1 link, total bandwidth 150000000 bps
Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPCP: Open event
Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPCP: state change Initial --> Starting
Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPCP: LayerStart
Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPV6CP: Open event
Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPV6CP: state change Initial --> Starting
Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPV6CP: LayerStart
Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPCP: Up event
Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPCP: state change Starting --> Req-Sent
Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPCP: SendConfigReq #1
Apr 10 14:29:47 pfSense ppp[79038]: [wan]   IPADDR 0.0.0.0
Apr 10 14:29:47 pfSense ppp[79038]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Apr 10 14:29:47 pfSense ppp[79038]: [wan]   PRIDNS 0.0.0.0
Apr 10 14:29:47 pfSense ppp[79038]: [wan]   SECDNS 0.0.0.0
Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPV6CP: Up event
Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPV6CP: state change Starting --> Req-Sent
Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPV6CP: SendConfigReq #1
Apr 10 14:29:49 pfSense ppp[79038]: [wan] IPV6CP: SendConfigReq #2
Apr 10 14:29:49 pfSense ppp[79038]: [wan] IPCP: SendConfigReq #2
Apr 10 14:29:49 pfSense ppp[79038]: [wan]   IPADDR 0.0.0.0
Apr 10 14:29:49 pfSense ppp[79038]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Apr 10 14:29:49 pfSense ppp[79038]: [wan]   PRIDNS 0.0.0.0
Apr 10 14:29:49 pfSense ppp[79038]: [wan]   SECDNS 0.0.0.0
Apr 10 14:29:51 pfSense ppp[79038]: [wan] IPCP: SendConfigReq #3
Apr 10 14:29:51 pfSense ppp[79038]: [wan]   IPADDR 0.0.0.0
Apr 10 14:29:51 pfSense ppp[79038]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Apr 10 14:29:51 pfSense ppp[79038]: [wan]   PRIDNS 0.0.0.0
Apr 10 14:29:51 pfSense ppp[79038]: [wan]   SECDNS 0.0.0.0
Apr 10 14:29:51 pfSense ppp[79038]: [wan] IPV6CP: SendConfigReq #3
Apr 10 14:29:53 pfSense ppp[79038]: [wan] IPV6CP: SendConfigReq #4
Apr 10 14:29:53 pfSense ppp[79038]: [wan] IPCP: SendConfigReq #4
Apr 10 14:29:53 pfSense ppp[79038]: [wan]   IPADDR 0.0.0.0
Apr 10 14:29:53 pfSense ppp[79038]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Apr 10 14:29:53 pfSense ppp[79038]: [wan]   PRIDNS 0.0.0.0
Apr 10 14:29:53 pfSense ppp[79038]: [wan]   SECDNS 0.0.0.0
Apr 10 14:29:55 pfSense ppp[79038]: [wan] IPCP: SendConfigReq #5
Apr 10 14:29:55 pfSense ppp[79038]: [wan]   IPADDR 0.0.0.0
Apr 10 14:29:55 pfSense ppp[79038]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Apr 10 14:29:55 pfSense ppp[79038]: [wan]   PRIDNS 0.0.0.0
Apr 10 14:29:55 pfSense ppp[79038]: [wan]   SECDNS 0.0.0.0
Apr 10 14:29:55 pfSense ppp[79038]: [wan] IPV6CP: SendConfigReq #5
Apr 10 14:29:57 pfSense ppp[79038]: [wan] IPV6CP: SendConfigReq #6
Apr 10 14:29:57 pfSense ppp[79038]: [wan] IPCP: SendConfigReq #6
Apr 10 14:29:57 pfSense ppp[79038]: [wan]   IPADDR 0.0.0.0
Apr 10 14:29:57 pfSense ppp[79038]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Apr 10 14:29:57 pfSense ppp[79038]: [wan]   PRIDNS 0.0.0.0
Apr 10 14:29:57 pfSense ppp[79038]: [wan]   SECDNS 0.0.0.0
Apr 10 14:29:59 pfSense ppp[79038]: [wan] IPCP: SendConfigReq #7
Apr 10 14:29:59 pfSense ppp[79038]: [wan]   IPADDR 0.0.0.0
Apr 10 14:29:59 pfSense ppp[79038]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Apr 10 14:29:59 pfSense ppp[79038]: [wan]   PRIDNS 0.0.0.0
Apr 10 14:29:59 pfSense ppp[79038]: [wan]   SECDNS 0.0.0.0
Apr 10 14:29:59 pfSense ppp[79038]: [wan] IPV6CP: SendConfigReq #7
Apr 10 14:30:01 pfSense ppp[79038]: [wan] IPV6CP: SendConfigReq #8
Apr 10 14:30:01 pfSense ppp[79038]: [wan] IPCP: SendConfigReq #8
Apr 10 14:30:01 pfSense ppp[79038]: [wan]   IPADDR 0.0.0.0
Apr 10 14:30:01 pfSense ppp[79038]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Apr 10 14:30:01 pfSense ppp[79038]: [wan]   PRIDNS 0.0.0.0
Apr 10 14:30:01 pfSense ppp[79038]: [wan]   SECDNS 0.0.0.0
Apr 10 14:30:03 pfSense ppp[79038]: [wan] IPCP: SendConfigReq #9
Apr 10 14:30:03 pfSense ppp[79038]: [wan]   IPADDR 0.0.0.0
Apr 10 14:30:03 pfSense ppp[79038]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Apr 10 14:30:03 pfSense ppp[79038]: [wan]   PRIDNS 0.0.0.0
Apr 10 14:30:03 pfSense ppp[79038]: [wan]   SECDNS 0.0.0.0
Apr 10 14:30:03 pfSense ppp[79038]: [wan] IPV6CP: SendConfigReq #9
Apr 10 14:30:05 pfSense ppp[79038]: [wan] IPV6CP: SendConfigReq #10
Apr 10 14:30:05 pfSense ppp[79038]: [wan] IPCP: SendConfigReq #10
Apr 10 14:30:05 pfSense ppp[79038]: [wan]   IPADDR 0.0.0.0
Apr 10 14:30:05 pfSense ppp[79038]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Apr 10 14:30:05 pfSense ppp[79038]: [wan]   PRIDNS 0.0.0.0
Apr 10 14:30:05 pfSense ppp[79038]: [wan]   SECDNS 0.0.0.0
Apr 10 14:30:07 pfSense ppp[79038]: [wan_link0] LCP: no reply to 1 echo request(s)
Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPCP: parameter negotiation failed
Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPCP: state change Req-Sent --> Stopped
Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPCP: LayerFinish
Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPV6CP: parameter negotiation failed
Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPV6CP: state change Req-Sent --> Stopped
Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPV6CP: LayerFinish
Apr 10 14:30:07 pfSense ppp[79038]: [wan] Bundle: No NCPs left. Closing links...
Apr 10 14:30:07 pfSense ppp[79038]: [wan] Bundle: closing link "wan_link0"...
Apr 10 14:30:07 pfSense ppp[79038]: [wan_link0] Link: CLOSE event
Apr 10 14:30:07 pfSense ppp[79038]: [wan_link0] LCP: Close event
Apr 10 14:30:07 pfSense ppp[79038]: [wan_link0] LCP: state change Opened --> Closing
Apr 10 14:30:07 pfSense ppp[79038]: [wan_link0] Link: Leave bundle "wan"
Apr 10 14:30:07 pfSense ppp[79038]: [wan] Bundle: Status update: up 0 links, total bandwidth 9600 bps
Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPCP: Close event
Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPCP: state change Stopped --> Closed
Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPV6CP: Close event
Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPV6CP: state change Stopped --> Closed
Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPCP: Down event
Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPCP: state change Closed --> Initial
Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPV6CP: Down event
Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPV6CP: state change Closed --> Initial
Apr 10 14:30:07 pfSense ppp[79038]: [wan] Bundle: Last link has gone, no links for bw-manage defined
Apr 10 14:30:07 pfSense ppp[79038]: [wan_link0] LCP: SendTerminateReq #2
Apr 10 14:30:07 pfSense ppp[79038]: [wan_link0] LCP: LayerDown
Apr 10 14:30:09 pfSense ppp[79038]: [wan_link0] LCP: SendTerminateReq #3
Apr 10 14:30:11 pfSense ppp[79038]: [wan_link0] LCP: state change Closing --> Closed
Apr 10 14:30:11 pfSense ppp[79038]: [wan_link0] LCP: LayerFinish
Apr 10 14:30:11 pfSense ppp[79038]: [wan_link0] Link: DOWN event
Apr 10 14:30:11 pfSense ppp[79038]: [wan_link0] LCP: Down event
Apr 10 14:30:11 pfSense ppp[79038]: [wan_link0] LCP: state change Closed --> Initial
Apr 10 14:30:11 pfSense ppp[79038]: [wan_link0] Link: reconnection attempt 1 in 3 seconds
Apr 10 14:30:14 pfSense ppp[79038]: [wan_link0] Link: reconnection attempt 1
Apr 10 14:30:14 pfSense ppp[79038]: [wan_link0] Link: OPEN event
Apr 10 14:30:14 pfSense ppp[79038]: [wan_link0] LCP: Open event
Apr 10 14:30:14 pfSense ppp[79038]: [wan_link0] LCP: state change Initial --> Starting
Apr 10 14:30:14 pfSense ppp[79038]: [wan_link0] LCP: LayerStart
Apr 10 14:30:14 pfSense ppp[79038]: [wan_link0] CHAT: Detected Custom modem.
Apr 10 14:30:14 pfSense ppp[79038]: 0x1595a91ffbac <???> at /usr/local/sbin/mpd5
Apr 10 14:30:14 pfSense ppp[79038]: 0x1595a91dff00 <???> at /usr/local/sbin/mpd5
Apr 10 14:30:14 pfSense ppp[79038]: 0x1595a922c0ac <???> at /usr/local/sbin/mpd5
Apr 10 14:30:14 pfSense ppp[79038]: 0x1595a9229590 <???> at /usr/local/sbin/mpd5
Apr 10 14:30:14 pfSense ppp[79038]: 0x1595a92125ec <???> at /usr/local/sbin/mpd5
Apr 10 14:30:14 pfSense ppp[79038]: 0x1595a923d73c <???> at /usr/local/sbin/mpd5
Apr 10 14:30:14 pfSense ppp[79038]: 0x1595a923d100 <???> at /usr/local/sbin/mpd5
Apr 10 14:30:14 pfSense ppp[79038]: ASSERT "!m->opened" failed: file "modem.c", line 215
Apr 10 14:30:14 pfSense ppp[79038]: fatal error, exiting
Apr 10 14:30:14 pfSense ppp[79038]: [wan] IFACE: Close event
Apr 10 14:30:14 pfSense ppp[79038]: [wan] IPCP: Close event
Apr 10 14:30:14 pfSense ppp[79038]: [wan] IPV6CP: Close event
Apr 10 14:30:14 pfSense ppp[79038]: [wan] Bundle: Shutdown
Apr 10 14:30:14 pfSense ppp[79038]: [wan_link0] Link: Shutdown
Apr 10 14:30:14 pfSense ppp[79038]: process 79038 terminated

                        I see auth is successful, but the interface doesn't appear to get a valid IP address?

                        1 Reply Last reply Reply Quote 0
                        • stephenw10S
                          stephenw10 Netgate Administrator
                          last edited by

                          Does it work at all without the custom init string? It's throwing errors when it tries to re-initialise at the end there.

                          But, yes, it looks to be correctly connecting and authorising so that's most of the way there. Are you sure that SIM allows connecting from anything but a phone?

                          It looks like whatever it's connected to there just isn't responding. I expect to see something like:

                          Apr 8 01:24:02 	ppp 	40818 	[opt1_link0] CHAP: Using authname "user"
Apr 8 01:24:02 	ppp 	40818 	[opt1_link0] CHAP: sending RESPONSE #1 len: 25
Apr 8 01:24:02 	ppp 	40818 	[opt1_link0] CHAP: rec'd SUCCESS #1 len: 4
Apr 8 01:24:02 	ppp 	40818 	[opt1_link0] LCP: authorization successful
Apr 8 01:24:02 	ppp 	40818 	[opt1_link0] Link: Matched action 'bundle "opt1" ""'
Apr 8 01:24:02 	ppp 	40818 	[opt1_link0] Link: Join bundle "opt1"
Apr 8 01:24:02 	ppp 	40818 	[opt1] Bundle: Status update: up 1 link, total bandwidth 100000000 bps
Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: Open event
Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: state change Initial --> Starting
Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: LayerStart
Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: Up event
Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: state change Starting --> Req-Sent
Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: SendConfigReq #9
Apr 8 01:24:02 	ppp 	40818 	[opt1] IPADDR 0.0.0.0
Apr 8 01:24:02 	ppp 	40818 	[opt1] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Apr 8 01:24:02 	ppp 	40818 	[opt1] PRIDNS 0.0.0.0
Apr 8 01:24:02 	ppp 	40818 	[opt1] SECDNS 0.0.0.0
Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: rec'd Configure Request #41 (Req-Sent)
Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: SendConfigAck #41
Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: state change Req-Sent --> Ack-Sent
Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: rec'd Configure Reject #9 (Ack-Sent)
Apr 8 01:24:02 	ppp 	40818 	[opt1] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: SendConfigReq #10
Apr 8 01:24:02 	ppp 	40818 	[opt1] IPADDR 0.0.0.0
Apr 8 01:24:02 	ppp 	40818 	[opt1] PRIDNS 0.0.0.0
Apr 8 01:24:02 	ppp 	40818 	[opt1] SECDNS 0.0.0.0
Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: rec'd Configure Nak #10 (Ack-Sent)
Apr 8 01:24:02 	ppp 	40818 	[opt1] IPADDR 188.29.107.153
Apr 8 01:24:02 	ppp 	40818 	[opt1] 188.29.107.153 is OK
Apr 8 01:24:02 	ppp 	40818 	[opt1] PRIDNS 188.31.250.128
Apr 8 01:24:02 	ppp 	40818 	[opt1] SECDNS 188.31.250.129
Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: SendConfigReq #11
Apr 8 01:24:02 	ppp 	40818 	[opt1] IPADDR 188.29.107.153
Apr 8 01:24:02 	ppp 	40818 	[opt1] PRIDNS 188.31.250.128
Apr 8 01:24:02 	ppp 	40818 	[opt1] SECDNS 188.31.250.129
Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: rec'd Configure Ack #11 (Ack-Sent)
Apr 8 01:24:02 	ppp 	40818 	[opt1] IPADDR 188.29.107.153
Apr 8 01:24:02 	ppp 	40818 	[opt1] PRIDNS 188.31.250.128
Apr 8 01:24:02 	ppp 	40818 	[opt1] SECDNS 188.31.250.129
Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: state change Ack-Sent --> Opened
Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: LayerUp
Apr 8 01:24:02 	ppp 	40818 	[opt1] 188.29.107.153 -> 10.64.64.0
Apr 8 01:24:04 	ppp 	40818 	[opt1] IFACE: Up event
Apr 8 01:24:04 	ppp 	40818 	[opt1] IFACE: Rename interface ng0 to ppp0
Apr 8 01:24:04 	ppp 	40818 	[opt1] IFACE: Add description "3GWAN"
                          1 Reply Last reply Reply Quote 0
                          • M
                            mphodge
                            last edited by

                            No, if I take out the init string I get:

                            Apr 10 20:52:05 pfSense ppp[79603]: Label 'MomIdentGeneriicc' not found
                            Apr 10 20:52:05 pfSense ppp[79603]: [wan_link0] CHAT: line 358: label "MomIdentGeneriicc" not found
                            Apr 10 20:52:05 pfSense ppp[79603]: [wan_link0] MODEM: chat script failed
                            Apr 10 20:52:05 pfSense ppp[79603]: [wan_link0] Link: DOWN event
                            Apr 10 20:52:05 pfSense ppp[79603]: [wan_link0] LCP: Down event
                            Apr 10 20:52:05 pfSense ppp[79603]: [wan_link0] Link: reconnection attempt 3 in 3 seconds
                            Apr 10 20:52:09 pfSense ppp[79603]: [wan_link0] Link: reconnection attempt 3

                            If I put it back in, I get the logs as previously. It connects but no IP address.

                            It is a SIM from a mobile phone, so includes calls and data, not a data-only SIM.
                            Do you think it's being blocked by the provider?

                            Dobby_D 1 Reply Last reply Reply Quote 0
                            • stephenw10S
                              stephenw10 Netgate Administrator
                              last edited by

                              It could be. Hard to say. It looks like some upstream issue though. Wrong APN name maybe?

                              1 Reply Last reply Reply Quote 0
                              • Dobby_D
                                Dobby_ @mphodge
                                last edited by

                                @mphodge

                                I put it back in, I get the logs as previously. It connects but no IP address.

                                It can be that the network is false, let us say as an example you are a
                                T-Mobile customer, you may set up then also the following;

                                • Country: Your country
                                • Telekom: telekom.iot.devices.de
                                • APN: APN number or name
                                • Name: the name you got from the mobile provider
                                • Passwort: the password you got from your provider

                                Please see the photos below: (2 points you can insert those informations)
                                Interfaces > PPP
                                mphodge1.jpg

                                Interface: LTE (or how you was naming it)
                                mphodge2.jpg

                                It is a SIM from a mobile phone, so includes calls and data, not a data-only SIM.

                                In your mobile phone the Name and Passwort will be inserted over the
                                SIM directly or over the first connect but in pfSense you must insert this
                                by hand.

                                Do you think it's being blocked by the provider?

                                Fals APN number false network? The Telekom or T-Mobile is setting up here
                                different networks for mobile phones and so you must also have or know the
                                exactly network name, as an example, not tmobile.iot4.mobile.net but
                                with tmobile.iot8.mobile.net it is the right one you need to take,
                                (Only as an example)

                                Perhaps you must find out a special AT string that must be inserted
                                to start and connect the modem correctly to the mobile ISP.

                                Have a look at @stephenw10 `s last post.

                                #~. @Dobby

                                Turris Omnia - 4 Ports - 2 GB RAM / TurrisOS 7 Release (Btrfs)
                                PC Engines APU4D4 - 4 Ports - 4 GB RAM / pfSense CE 2.7.2 Release (ZFS)
                                PC Engines APU6B4 - 4 Ports - 4 GB RAM / pfSense+ (Plus) 24.03_1 Release (ZFS)

                                1 Reply Last reply Reply Quote 0
                                • M
                                  mphodge
                                  last edited by

                                  So, I ordered a data-only SIM that comes with a public IP address to try this.

                                  Inserted, and got same logs as above, i.e.

                                  Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0] LCP: state change Ack-Sent --> Opened
Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0] LCP: auth: peer wants CHAP, I want nothing
Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0] LCP: LayerUp
Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0] LCP: rec'd Discard Request #11 (Opened)
Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0] CHAP: rec'd CHALLENGE #1 len: 35
Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0]   Name: "UMTS_CHAP_SRVR"
Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0] CHAP: Using authname "user"
Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0] CHAP: sending RESPONSE #1 len: 25
Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0] CHAP: rec'd SUCCESS #1 len: 4
Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0] LCP: authorization successful
Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0] Link: Matched action 'bundle "wan" ""'
Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0] Link: Join bundle "wan"
Apr 15 14:00:57 pfSense ppp[31402]: [wan] Bundle: Status update: up 1 link, total bandwidth 150000000 bps

                                  But then no IP;

                                  Apr 15 14:00:57 pfSense ppp[31402]: [wan] IPCP: SendConfigReq #1
Apr 15 14:00:57 pfSense ppp[31402]: [wan]   IPADDR 0.0.0.0
Apr 15 14:00:57 pfSense ppp[31402]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Apr 15 14:00:57 pfSense ppp[31402]: [wan]   PRIDNS 0.0.0.0
Apr 15 14:00:57 pfSense ppp[31402]: [wan]   SECDNS 0.0.0.0

                                  So then I tried the SIM on a laptop with Windows 10, and it connects and gets an IP = SIM OK.

                                  So then I tried a test on 2100 with NO SIM inserted and get exact same logs as above!
                                  Which makes me wonder - is the SIM slot actually working??
                                  How do I test from the modem if the SIM is working?

                                  I tried the following from CLI using cu:

                                  Connected
at&f
OK
atdt ###########
NO CARRIER

                                  So maybe the SIM slot is not connected to the M.2 interface?

                                  1 Reply Last reply Reply Quote 0
                                  • stephenw10S
                                    stephenw10 Netgate Administrator
                                    last edited by

                                    It is connected. You can check it from the AT prompt like:

                                    at+cpin?
+CPIN: READY

at+cimi
234444404998758

                                    If you see:

                                    at+cpin?
+CME ERROR: SIM not inserted

                                    That's a problem.

                                    1 Reply Last reply Reply Quote 0
                                    • M
                                      mphodge
                                      last edited by

                                      Yes, I get:

                                      atz
OK
at+cpin?
+CME ERROR: SIM not inserted
at+cimi
ERROR

                                      Ok so that's the problem then.
                                      How can I determine where the fault is?
                                      I know the SIM works in a laptop.
                                      I also know the modem works.
                                      Maybe a faulty device?
                                      This is showing the way I insert the SIM, in fact it 'clicks' when pushed in.
                                      2100.png

                                      1 Reply Last reply Reply Quote 0
                                      • M
                                        mphodge
                                        last edited by

                                        Ok, so I rebooted the 2100 with the SIM inserted and now I get:

                                        at+cpin?
+CPIN: READY
OK
at+cimi
204080830238557
OK

                                        However, still no PPP connection. Same logs as previously, tries to connect, authenticates ok, no IP, terminates process.
                                        Have double-checked the APN name which is correct from the SIM supplier.
                                        😞

                                        stephenw10S 1 Reply Last reply Reply Quote 0
                                        • stephenw10S
                                          stephenw10 Netgate Administrator @mphodge
                                          last edited by

                                          I don't think it's the SIM. Or at least not the connectivity to it. When you tested it without the SIM did you reboot in between? I'm not sure when the modem actually queries it but I'd be amazed it got that far without any SIM present.

                                          1 Reply Last reply Reply Quote 0
                                          • Dobby_D
                                            Dobby_
                                            last edited by

                                            I saw your picture (2100 with the modem), please connect the antennas even
                                            before your empower the modem, the antennas are grounding the modem
                                            device!!! (electric grounding)

                                            Is this a M.2 modem? Are the antennas also made for M.2 or only for miniPCIe?
                                            There are differences between.

                                            There are two modes DIP (direct IP) or QMI (Qualcomm MSM Interface),
                                            I use a Sierra Wireless 7710 LTE modem and must set it up to the DIP
                                            mode, until it was not working for me in pfSense.

                                            Finding out the mode for my modem was marching this way;

                                            [24.03-RC][root@xxx.xxx]/root: usbconfig
ugen1.1: <AMD EHCI root HUB> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAV                            E (0mA)
ugen0.1: <AMD XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SA                            VE (0mA)
ugen2.1: <AMD EHCI root HUB> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAV                            E (0mA)
ugen1.2: <vendor 0x0438 product 0x7900> at usbus1, cfg=0 md=HOST spd=HIGH (480Mb                            ps) pwr=SAVE (100mA)
ugen2.2: <vendor 0x0438 product 0x7900> at usbus2, cfg=0 md=HOST spd=HIGH (480Mb                            ps) pwr=SAVE (100mA)
ugen2.3: <u-blox AG - www.u-blox.com u-blox 6  -  GPS Receiver> at usbus2, cfg=0                             md=HOST spd=FULL (12Mbps) pwr=ON (100mA)
ugen0.2: <Sierra Wireless, Incorporated MC7710> at usbus0, cfg=0 md=HOST spd=HIG                            H (480Mbps) pwr=ON (0mA)


                                            [24.03-RC][root@xxx.xxx]/root: usbconfig -d 0.2 dump_device_desc
ugen0.2: <Sierra Wireless, Incorporated MC7710> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (0mA)

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0000  <Probed by interface class>
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0000
  bMaxPacketSize0 = 0x0040
  idVendor = 0x1199
  idProduct = 0x68a3
  bcdDevice = 0x0006
  iManufacturer = 0x0003  <Sierra Wireless, Incorporated>
  iProduct = 0x0002  <MC7710>
  iSerialNumber = 0x0004  <358178041368210>
  bNumConfigurations = 0x0001

                                            This command shows the USB PID

                                            usbconfig -d 0.2 dump_device_desc

                                            68A2 = QMI mode
                                            68A3 = DIP mode

                                            1199:68a2 - MC7710 in QMI mode
                                            1199:68a3 - MC7710 in DirectIP mode

                                            I was using this toll here for setting the modem to the DIP mode:
                                            DIP_QMI mode switch tool

                                            Insert the modem and the SIM card, boot the pfSense, after boot up go via console (Putty) and set up the following commands to find out more;

                                            # connects to the modem
cu -l /dev/cuaU0.2
answer or oputput will be "Connected

# puts the modem in verbose mode
AT+CMEE=2

# Shows the vendor and bands
ATI

# proofing the SIM / PIN
AT+cpin?

# Proofing the signal strength of the Band/Antenna
AT+CSQ

# is scanning the available networks
AT+COPS=?

# Check the mobile phone activity status 
AT+CPAS

# shows the modem.log
tail -f /var/log/ppp.log

                                            You can also try out to set the modem into the DIP mode by using this:

                                            AT!ENTERCND="A710"
AT!UDPID=68A3
AT!RESE

                                            #~. @Dobby

                                            Turris Omnia - 4 Ports - 2 GB RAM / TurrisOS 7 Release (Btrfs)
                                            PC Engines APU4D4 - 4 Ports - 4 GB RAM / pfSense CE 2.7.2 Release (ZFS)
                                            PC Engines APU6B4 - 4 Ports - 4 GB RAM / pfSense+ (Plus) 24.03_1 Release (ZFS)

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.