Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Netgate 2100 micro sim + 4G LTE / 5G

    Scheduled Pinned Locked Moved Hardware
    63 Posts 9 Posters 7.7k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      mphodge
      last edited by

      Ok so I have my SIM inserted now :-)

      I have my M.2 modem installed, which shows as:

      ugen0.2: <Sierra Wireless, Incorporated EM7455> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)

      When I go to create a PPP interface, how do I know which device it is?
      /dev/cuau0
      /dev/cuaU0.0
      /dev/cuaU0.1
      /dev/cuaU0.2

      I assumed the last one, created the PPP and assigned it to WAN. Now under Interfaces on the Dashboard, WAN shows with a green up-arrow with Uptime: n/a. Under the Cellular widget I see 4 green bars next to WAN, Status up, Carrier: No Service.

      I know the SIM works fine as I just tested it in a mobile phone.
      What am I missing?

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        Check the ppp log. Is it actually connecting to anything? Seeing a response?

        I expect it to be on cuaU0.2 yes. You can check that from the CLI if is not already using the port (you'd have to disable it) like:

        [admin@6100-2.stevew.lan]/root: cu -l cuaU0.2
        Connected
        at
        OK
        ati
        Manufacturer: Sierra Wireless, Incorporated
        Model: EM7455
        Revision: SWI9X30C_02.08.02.00 r5428 CARMD-EV-FRMWR2 2016/01/06 20:38:53
        MEID: XXXXXXXXXXXX...
        

        If the log shows a response there then there's no need to check that.

        1 Reply Last reply Reply Quote 0
        • M
          mphodge
          last edited by

          I get this:

          [23.09.1-RELEASE][root@pfSense.home.arpa]/var/log: cu -l cuaU0.2
          Connected
          at
          OK
          ati
          Manufacturer: Sierra Wireless, Incorporated
          Model: EM7455
          Revision: SWI9X30C_02.38.00.00 rE3F3E55C03AE94 jenkins 2022/01/13 05:16:00
          MEID: 35399007355869
          IMEI: 353990073558699
          IMEI SV: 22
          FSN: LF641313650210
          +GCAP: +CGSM
          OK

          In the ppp.log I get multiples of:

          Apr 10 12:36:45 pfSense ppp[69699]: Label 'MomIdentGeneriicc' not found
          Apr 10 12:36:45 pfSense ppp[69699]: [wan_link0] CHAT: line 358: label "MomIdentGeneriicc" not found
          Apr 10 12:36:45 pfSense ppp[69699]: [wan_link0] MODEM: chat script failed
          Apr 10 12:36:45 pfSense ppp[69699]: [wan_link0] Link: DOWN event
          Apr 10 12:36:45 pfSense ppp[69699]: [wan_link0] LCP: Down event
          Apr 10 12:36:45 pfSense ppp[69699]: [wan_link0] Link: reconnection attempt 4497 in 1 seconds
          Apr 10 12:36:46 pfSense ppp[69699]: [wan_link0] Link: reconnection attempt 4497

          Where is that label from?

          1 Reply Last reply Reply Quote 0
          • stephenw10S
            stephenw10 Netgate Administrator
            last edited by

            Ok so the port looks good.

            You should remove or disable the cellular package. It doesn't work with the Sierra devices as it requires two AT ports.

            How do you have the ppp link configured? You may need a custom INIT string, I use: &F&C1&D2E0S0=0${temp}

            1 Reply Last reply Reply Quote 0
            • M
              mphodge
              last edited by stephenw10

              Ok I removed the cellular package and changed the init string.

              It tries to work, but doesn't stay up...

              Apr 10 14:29:47 pfSense ppp[79038]: process 79038 started, version 5.9
              Apr 10 14:29:47 pfSense ppp[79038]: web: web is not running
              Apr 10 14:29:47 pfSense ppp[79038]: [wan] Bundle: Interface ng0 created
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] Link: OPEN event
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: Open event
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: state change Initial --> Starting
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: LayerStart
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] CHAT: +CGDCONT=1,"IP","data.lycamobile.co.uk"
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] CHAT: Detected Custom modem.
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] CHAT: Dialing server at *99#...
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] CHAT: ATDT*99#
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] CHAT: Connected at 150000000.
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] MODEM: chat script succeeded
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] Link: UP event
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: Up event
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: state change Starting --> Req-Sent
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: SendConfigReq #1
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   ACFCOMP
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   PROTOCOMP
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   ACCMAP 0x000a0000
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   MRU 1500
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   MAGICNUM 0x509fda6c
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: rec'd Configure Request #2 (Req-Sent)
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   ACCMAP 0x00000000
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   AUTHPROTO CHAP MD5
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   MAGICNUM 0x04d26544
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   PROTOCOMP
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   ACFCOMP
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: SendConfigAck #2
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   ACCMAP 0x00000000
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   AUTHPROTO CHAP MD5
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   MAGICNUM 0x04d26544
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   PROTOCOMP
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   ACFCOMP
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: state change Req-Sent --> Ack-Sent
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: rec'd Configure Ack #1 (Ack-Sent)
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   ACFCOMP
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   PROTOCOMP
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   ACCMAP 0x000a0000
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   MRU 1500
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   MAGICNUM 0x509fda6c
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: state change Ack-Sent --> Opened
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: auth: peer wants CHAP, I want nothing
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: LayerUp
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: rec'd Discard Request #3 (Opened)
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] CHAP: rec'd CHALLENGE #1 len: 35
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0]   Name: "UMTS_CHAP_SRVR"
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] CHAP: Using authname "lmuk"
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] CHAP: sending RESPONSE #1 len: 25
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] CHAP: rec'd SUCCESS #1 len: 4
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] LCP: authorization successful
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] Link: Matched action 'bundle "wan" ""'
              Apr 10 14:29:47 pfSense ppp[79038]: [wan_link0] Link: Join bundle "wan"
              Apr 10 14:29:47 pfSense ppp[79038]: [wan] Bundle: Status update: up 1 link, total bandwidth 150000000 bps
              Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPCP: Open event
              Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPCP: state change Initial --> Starting
              Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPCP: LayerStart
              Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPV6CP: Open event
              Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPV6CP: state change Initial --> Starting
              Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPV6CP: LayerStart
              Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPCP: Up event
              Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPCP: state change Starting --> Req-Sent
              Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPCP: SendConfigReq #1
              Apr 10 14:29:47 pfSense ppp[79038]: [wan]   IPADDR 0.0.0.0
              Apr 10 14:29:47 pfSense ppp[79038]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
              Apr 10 14:29:47 pfSense ppp[79038]: [wan]   PRIDNS 0.0.0.0
              Apr 10 14:29:47 pfSense ppp[79038]: [wan]   SECDNS 0.0.0.0
              Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPV6CP: Up event
              Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPV6CP: state change Starting --> Req-Sent
              Apr 10 14:29:47 pfSense ppp[79038]: [wan] IPV6CP: SendConfigReq #1
              Apr 10 14:29:49 pfSense ppp[79038]: [wan] IPV6CP: SendConfigReq #2
              Apr 10 14:29:49 pfSense ppp[79038]: [wan] IPCP: SendConfigReq #2
              Apr 10 14:29:49 pfSense ppp[79038]: [wan]   IPADDR 0.0.0.0
              Apr 10 14:29:49 pfSense ppp[79038]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
              Apr 10 14:29:49 pfSense ppp[79038]: [wan]   PRIDNS 0.0.0.0
              Apr 10 14:29:49 pfSense ppp[79038]: [wan]   SECDNS 0.0.0.0
              Apr 10 14:29:51 pfSense ppp[79038]: [wan] IPCP: SendConfigReq #3
              Apr 10 14:29:51 pfSense ppp[79038]: [wan]   IPADDR 0.0.0.0
              Apr 10 14:29:51 pfSense ppp[79038]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
              Apr 10 14:29:51 pfSense ppp[79038]: [wan]   PRIDNS 0.0.0.0
              Apr 10 14:29:51 pfSense ppp[79038]: [wan]   SECDNS 0.0.0.0
              Apr 10 14:29:51 pfSense ppp[79038]: [wan] IPV6CP: SendConfigReq #3
              Apr 10 14:29:53 pfSense ppp[79038]: [wan] IPV6CP: SendConfigReq #4
              Apr 10 14:29:53 pfSense ppp[79038]: [wan] IPCP: SendConfigReq #4
              Apr 10 14:29:53 pfSense ppp[79038]: [wan]   IPADDR 0.0.0.0
              Apr 10 14:29:53 pfSense ppp[79038]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
              Apr 10 14:29:53 pfSense ppp[79038]: [wan]   PRIDNS 0.0.0.0
              Apr 10 14:29:53 pfSense ppp[79038]: [wan]   SECDNS 0.0.0.0
              Apr 10 14:29:55 pfSense ppp[79038]: [wan] IPCP: SendConfigReq #5
              Apr 10 14:29:55 pfSense ppp[79038]: [wan]   IPADDR 0.0.0.0
              Apr 10 14:29:55 pfSense ppp[79038]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
              Apr 10 14:29:55 pfSense ppp[79038]: [wan]   PRIDNS 0.0.0.0
              Apr 10 14:29:55 pfSense ppp[79038]: [wan]   SECDNS 0.0.0.0
              Apr 10 14:29:55 pfSense ppp[79038]: [wan] IPV6CP: SendConfigReq #5
              Apr 10 14:29:57 pfSense ppp[79038]: [wan] IPV6CP: SendConfigReq #6
              Apr 10 14:29:57 pfSense ppp[79038]: [wan] IPCP: SendConfigReq #6
              Apr 10 14:29:57 pfSense ppp[79038]: [wan]   IPADDR 0.0.0.0
              Apr 10 14:29:57 pfSense ppp[79038]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
              Apr 10 14:29:57 pfSense ppp[79038]: [wan]   PRIDNS 0.0.0.0
              Apr 10 14:29:57 pfSense ppp[79038]: [wan]   SECDNS 0.0.0.0
              Apr 10 14:29:59 pfSense ppp[79038]: [wan] IPCP: SendConfigReq #7
              Apr 10 14:29:59 pfSense ppp[79038]: [wan]   IPADDR 0.0.0.0
              Apr 10 14:29:59 pfSense ppp[79038]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
              Apr 10 14:29:59 pfSense ppp[79038]: [wan]   PRIDNS 0.0.0.0
              Apr 10 14:29:59 pfSense ppp[79038]: [wan]   SECDNS 0.0.0.0
              Apr 10 14:29:59 pfSense ppp[79038]: [wan] IPV6CP: SendConfigReq #7
              Apr 10 14:30:01 pfSense ppp[79038]: [wan] IPV6CP: SendConfigReq #8
              Apr 10 14:30:01 pfSense ppp[79038]: [wan] IPCP: SendConfigReq #8
              Apr 10 14:30:01 pfSense ppp[79038]: [wan]   IPADDR 0.0.0.0
              Apr 10 14:30:01 pfSense ppp[79038]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
              Apr 10 14:30:01 pfSense ppp[79038]: [wan]   PRIDNS 0.0.0.0
              Apr 10 14:30:01 pfSense ppp[79038]: [wan]   SECDNS 0.0.0.0
              Apr 10 14:30:03 pfSense ppp[79038]: [wan] IPCP: SendConfigReq #9
              Apr 10 14:30:03 pfSense ppp[79038]: [wan]   IPADDR 0.0.0.0
              Apr 10 14:30:03 pfSense ppp[79038]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
              Apr 10 14:30:03 pfSense ppp[79038]: [wan]   PRIDNS 0.0.0.0
              Apr 10 14:30:03 pfSense ppp[79038]: [wan]   SECDNS 0.0.0.0
              Apr 10 14:30:03 pfSense ppp[79038]: [wan] IPV6CP: SendConfigReq #9
              Apr 10 14:30:05 pfSense ppp[79038]: [wan] IPV6CP: SendConfigReq #10
              Apr 10 14:30:05 pfSense ppp[79038]: [wan] IPCP: SendConfigReq #10
              Apr 10 14:30:05 pfSense ppp[79038]: [wan]   IPADDR 0.0.0.0
              Apr 10 14:30:05 pfSense ppp[79038]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
              Apr 10 14:30:05 pfSense ppp[79038]: [wan]   PRIDNS 0.0.0.0
              Apr 10 14:30:05 pfSense ppp[79038]: [wan]   SECDNS 0.0.0.0
              Apr 10 14:30:07 pfSense ppp[79038]: [wan_link0] LCP: no reply to 1 echo request(s)
              Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPCP: parameter negotiation failed
              Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPCP: state change Req-Sent --> Stopped
              Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPCP: LayerFinish
              Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPV6CP: parameter negotiation failed
              Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPV6CP: state change Req-Sent --> Stopped
              Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPV6CP: LayerFinish
              Apr 10 14:30:07 pfSense ppp[79038]: [wan] Bundle: No NCPs left. Closing links...
              Apr 10 14:30:07 pfSense ppp[79038]: [wan] Bundle: closing link "wan_link0"...
              Apr 10 14:30:07 pfSense ppp[79038]: [wan_link0] Link: CLOSE event
              Apr 10 14:30:07 pfSense ppp[79038]: [wan_link0] LCP: Close event
              Apr 10 14:30:07 pfSense ppp[79038]: [wan_link0] LCP: state change Opened --> Closing
              Apr 10 14:30:07 pfSense ppp[79038]: [wan_link0] Link: Leave bundle "wan"
              Apr 10 14:30:07 pfSense ppp[79038]: [wan] Bundle: Status update: up 0 links, total bandwidth 9600 bps
              Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPCP: Close event
              Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPCP: state change Stopped --> Closed
              Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPV6CP: Close event
              Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPV6CP: state change Stopped --> Closed
              Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPCP: Down event
              Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPCP: state change Closed --> Initial
              Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPV6CP: Down event
              Apr 10 14:30:07 pfSense ppp[79038]: [wan] IPV6CP: state change Closed --> Initial
              Apr 10 14:30:07 pfSense ppp[79038]: [wan] Bundle: Last link has gone, no links for bw-manage defined
              Apr 10 14:30:07 pfSense ppp[79038]: [wan_link0] LCP: SendTerminateReq #2
              Apr 10 14:30:07 pfSense ppp[79038]: [wan_link0] LCP: LayerDown
              Apr 10 14:30:09 pfSense ppp[79038]: [wan_link0] LCP: SendTerminateReq #3
              Apr 10 14:30:11 pfSense ppp[79038]: [wan_link0] LCP: state change Closing --> Closed
              Apr 10 14:30:11 pfSense ppp[79038]: [wan_link0] LCP: LayerFinish
              Apr 10 14:30:11 pfSense ppp[79038]: [wan_link0] Link: DOWN event
              Apr 10 14:30:11 pfSense ppp[79038]: [wan_link0] LCP: Down event
              Apr 10 14:30:11 pfSense ppp[79038]: [wan_link0] LCP: state change Closed --> Initial
              Apr 10 14:30:11 pfSense ppp[79038]: [wan_link0] Link: reconnection attempt 1 in 3 seconds
              Apr 10 14:30:14 pfSense ppp[79038]: [wan_link0] Link: reconnection attempt 1
              Apr 10 14:30:14 pfSense ppp[79038]: [wan_link0] Link: OPEN event
              Apr 10 14:30:14 pfSense ppp[79038]: [wan_link0] LCP: Open event
              Apr 10 14:30:14 pfSense ppp[79038]: [wan_link0] LCP: state change Initial --> Starting
              Apr 10 14:30:14 pfSense ppp[79038]: [wan_link0] LCP: LayerStart
              Apr 10 14:30:14 pfSense ppp[79038]: [wan_link0] CHAT: Detected Custom modem.
              Apr 10 14:30:14 pfSense ppp[79038]: 0x1595a91ffbac <???> at /usr/local/sbin/mpd5
              Apr 10 14:30:14 pfSense ppp[79038]: 0x1595a91dff00 <???> at /usr/local/sbin/mpd5
              Apr 10 14:30:14 pfSense ppp[79038]: 0x1595a922c0ac <???> at /usr/local/sbin/mpd5
              Apr 10 14:30:14 pfSense ppp[79038]: 0x1595a9229590 <???> at /usr/local/sbin/mpd5
              Apr 10 14:30:14 pfSense ppp[79038]: 0x1595a92125ec <???> at /usr/local/sbin/mpd5
              Apr 10 14:30:14 pfSense ppp[79038]: 0x1595a923d73c <???> at /usr/local/sbin/mpd5
              Apr 10 14:30:14 pfSense ppp[79038]: 0x1595a923d100 <???> at /usr/local/sbin/mpd5
              Apr 10 14:30:14 pfSense ppp[79038]: ASSERT "!m->opened" failed: file "modem.c", line 215
              Apr 10 14:30:14 pfSense ppp[79038]: fatal error, exiting
              Apr 10 14:30:14 pfSense ppp[79038]: [wan] IFACE: Close event
              Apr 10 14:30:14 pfSense ppp[79038]: [wan] IPCP: Close event
              Apr 10 14:30:14 pfSense ppp[79038]: [wan] IPV6CP: Close event
              Apr 10 14:30:14 pfSense ppp[79038]: [wan] Bundle: Shutdown
              Apr 10 14:30:14 pfSense ppp[79038]: [wan_link0] Link: Shutdown
              Apr 10 14:30:14 pfSense ppp[79038]: process 79038 terminated
              

              I see auth is successful, but the interface doesn't appear to get a valid IP address?

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                Does it work at all without the custom init string? It's throwing errors when it tries to re-initialise at the end there.

                But, yes, it looks to be correctly connecting and authorising so that's most of the way there. Are you sure that SIM allows connecting from anything but a phone?

                It looks like whatever it's connected to there just isn't responding. I expect to see something like:

                Apr 8 01:24:02 	ppp 	40818 	[opt1_link0] CHAP: Using authname "user"
                Apr 8 01:24:02 	ppp 	40818 	[opt1_link0] CHAP: sending RESPONSE #1 len: 25
                Apr 8 01:24:02 	ppp 	40818 	[opt1_link0] CHAP: rec'd SUCCESS #1 len: 4
                Apr 8 01:24:02 	ppp 	40818 	[opt1_link0] LCP: authorization successful
                Apr 8 01:24:02 	ppp 	40818 	[opt1_link0] Link: Matched action 'bundle "opt1" ""'
                Apr 8 01:24:02 	ppp 	40818 	[opt1_link0] Link: Join bundle "opt1"
                Apr 8 01:24:02 	ppp 	40818 	[opt1] Bundle: Status update: up 1 link, total bandwidth 100000000 bps
                Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: Open event
                Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: state change Initial --> Starting
                Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: LayerStart
                Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: Up event
                Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: state change Starting --> Req-Sent
                Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: SendConfigReq #9
                Apr 8 01:24:02 	ppp 	40818 	[opt1] IPADDR 0.0.0.0
                Apr 8 01:24:02 	ppp 	40818 	[opt1] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
                Apr 8 01:24:02 	ppp 	40818 	[opt1] PRIDNS 0.0.0.0
                Apr 8 01:24:02 	ppp 	40818 	[opt1] SECDNS 0.0.0.0
                Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: rec'd Configure Request #41 (Req-Sent)
                Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: SendConfigAck #41
                Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: state change Req-Sent --> Ack-Sent
                Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: rec'd Configure Reject #9 (Ack-Sent)
                Apr 8 01:24:02 	ppp 	40818 	[opt1] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
                Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: SendConfigReq #10
                Apr 8 01:24:02 	ppp 	40818 	[opt1] IPADDR 0.0.0.0
                Apr 8 01:24:02 	ppp 	40818 	[opt1] PRIDNS 0.0.0.0
                Apr 8 01:24:02 	ppp 	40818 	[opt1] SECDNS 0.0.0.0
                Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: rec'd Configure Nak #10 (Ack-Sent)
                Apr 8 01:24:02 	ppp 	40818 	[opt1] IPADDR 188.29.107.153
                Apr 8 01:24:02 	ppp 	40818 	[opt1] 188.29.107.153 is OK
                Apr 8 01:24:02 	ppp 	40818 	[opt1] PRIDNS 188.31.250.128
                Apr 8 01:24:02 	ppp 	40818 	[opt1] SECDNS 188.31.250.129
                Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: SendConfigReq #11
                Apr 8 01:24:02 	ppp 	40818 	[opt1] IPADDR 188.29.107.153
                Apr 8 01:24:02 	ppp 	40818 	[opt1] PRIDNS 188.31.250.128
                Apr 8 01:24:02 	ppp 	40818 	[opt1] SECDNS 188.31.250.129
                Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: rec'd Configure Ack #11 (Ack-Sent)
                Apr 8 01:24:02 	ppp 	40818 	[opt1] IPADDR 188.29.107.153
                Apr 8 01:24:02 	ppp 	40818 	[opt1] PRIDNS 188.31.250.128
                Apr 8 01:24:02 	ppp 	40818 	[opt1] SECDNS 188.31.250.129
                Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: state change Ack-Sent --> Opened
                Apr 8 01:24:02 	ppp 	40818 	[opt1] IPCP: LayerUp
                Apr 8 01:24:02 	ppp 	40818 	[opt1] 188.29.107.153 -> 10.64.64.0
                Apr 8 01:24:04 	ppp 	40818 	[opt1] IFACE: Up event
                Apr 8 01:24:04 	ppp 	40818 	[opt1] IFACE: Rename interface ng0 to ppp0
                Apr 8 01:24:04 	ppp 	40818 	[opt1] IFACE: Add description "3GWAN" 
                
                1 Reply Last reply Reply Quote 0
                • M
                  mphodge
                  last edited by

                  No, if I take out the init string I get:

                  Apr 10 20:52:05 pfSense ppp[79603]: Label 'MomIdentGeneriicc' not found
                  Apr 10 20:52:05 pfSense ppp[79603]: [wan_link0] CHAT: line 358: label "MomIdentGeneriicc" not found
                  Apr 10 20:52:05 pfSense ppp[79603]: [wan_link0] MODEM: chat script failed
                  Apr 10 20:52:05 pfSense ppp[79603]: [wan_link0] Link: DOWN event
                  Apr 10 20:52:05 pfSense ppp[79603]: [wan_link0] LCP: Down event
                  Apr 10 20:52:05 pfSense ppp[79603]: [wan_link0] Link: reconnection attempt 3 in 3 seconds
                  Apr 10 20:52:09 pfSense ppp[79603]: [wan_link0] Link: reconnection attempt 3

                  If I put it back in, I get the logs as previously. It connects but no IP address.

                  It is a SIM from a mobile phone, so includes calls and data, not a data-only SIM.
                  Do you think it's being blocked by the provider?

                  Dobby_D 1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    It could be. Hard to say. It looks like some upstream issue though. Wrong APN name maybe?

                    1 Reply Last reply Reply Quote 0
                    • Dobby_D
                      Dobby_ @mphodge
                      last edited by

                      @mphodge

                      I put it back in, I get the logs as previously. It connects but no IP address.

                      It can be that the network is false, let us say as an example you are a
                      T-Mobile customer, you may set up then also the following;

                      • Country: Your country
                      • Telekom: telekom.iot.devices.de
                      • APN: APN number or name
                      • Name: the name you got from the mobile provider
                      • Passwort: the password you got from your provider

                      Please see the photos below: (2 points you can insert those informations)
                      Interfaces > PPP
                      mphodge1.jpg

                      Interface: LTE (or how you was naming it)
                      mphodge2.jpg

                      It is a SIM from a mobile phone, so includes calls and data, not a data-only SIM.

                      In your mobile phone the Name and Passwort will be inserted over the
                      SIM directly or over the first connect but in pfSense you must insert this
                      by hand.

                      Do you think it's being blocked by the provider?

                      Fals APN number false network? The Telekom or T-Mobile is setting up here
                      different networks for mobile phones and so you must also have or know the
                      exactly network name, as an example, not tmobile.iot4.mobile.net but
                      with tmobile.iot8.mobile.net it is the right one you need to take,
                      (Only as an example)

                      Perhaps you must find out a special AT string that must be inserted
                      to start and connect the modem correctly to the mobile ISP.

                      Have a look at @stephenw10 `s last post.

                      #~. @Dobby

                      Turris Omnia - 4 Ports - 2 GB RAM / TurrisOS 7 Release (Btrfs)
                      PC Engines APU4D4 - 4 Ports - 4 GB RAM / pfSense CE 2.7.2 Release (ZFS)
                      PC Engines APU6B4 - 4 Ports - 4 GB RAM / pfSense+ (Plus) 24.03_1 Release (ZFS)

                      1 Reply Last reply Reply Quote 0
                      • M
                        mphodge
                        last edited by

                        So, I ordered a data-only SIM that comes with a public IP address to try this.

                        Inserted, and got same logs as above, i.e.

                        Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0] LCP: state change Ack-Sent --> Opened
                        Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0] LCP: auth: peer wants CHAP, I want nothing
                        Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0] LCP: LayerUp
                        Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0] LCP: rec'd Discard Request #11 (Opened)
                        Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0] CHAP: rec'd CHALLENGE #1 len: 35
                        Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0]   Name: "UMTS_CHAP_SRVR"
                        Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0] CHAP: Using authname "user"
                        Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0] CHAP: sending RESPONSE #1 len: 25
                        Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0] CHAP: rec'd SUCCESS #1 len: 4
                        Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0] LCP: authorization successful
                        Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0] Link: Matched action 'bundle "wan" ""'
                        Apr 15 14:00:57 pfSense ppp[31402]: [wan_link0] Link: Join bundle "wan"
                        Apr 15 14:00:57 pfSense ppp[31402]: [wan] Bundle: Status update: up 1 link, total bandwidth 150000000 bps
                        

                        But then no IP;

                        Apr 15 14:00:57 pfSense ppp[31402]: [wan] IPCP: SendConfigReq #1
                        Apr 15 14:00:57 pfSense ppp[31402]: [wan]   IPADDR 0.0.0.0
                        Apr 15 14:00:57 pfSense ppp[31402]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
                        Apr 15 14:00:57 pfSense ppp[31402]: [wan]   PRIDNS 0.0.0.0
                        Apr 15 14:00:57 pfSense ppp[31402]: [wan]   SECDNS 0.0.0.0
                        

                        So then I tried the SIM on a laptop with Windows 10, and it connects and gets an IP = SIM OK.

                        So then I tried a test on 2100 with NO SIM inserted and get exact same logs as above!
                        Which makes me wonder - is the SIM slot actually working??
                        How do I test from the modem if the SIM is working?

                        I tried the following from CLI using cu:

                        Connected
                        at&f
                        OK
                        atdt ###########
                        NO CARRIER
                        

                        So maybe the SIM slot is not connected to the M.2 interface?

                        1 Reply Last reply Reply Quote 0
                        • stephenw10S
                          stephenw10 Netgate Administrator
                          last edited by

                          It is connected. You can check it from the AT prompt like:

                          at+cpin?
                          +CPIN: READY
                          
                          at+cimi
                          234444404998758
                          

                          If you see:

                          at+cpin?
                          +CME ERROR: SIM not inserted
                          

                          That's a problem.

                          1 Reply Last reply Reply Quote 0
                          • M
                            mphodge
                            last edited by

                            Yes, I get:

                            atz
                            OK
                            at+cpin?
                            +CME ERROR: SIM not inserted
                            at+cimi
                            ERROR
                            

                            Ok so that's the problem then.
                            How can I determine where the fault is?
                            I know the SIM works in a laptop.
                            I also know the modem works.
                            Maybe a faulty device?
                            This is showing the way I insert the SIM, in fact it 'clicks' when pushed in.
                            2100.png

                            1 Reply Last reply Reply Quote 0
                            • M
                              mphodge
                              last edited by

                              Ok, so I rebooted the 2100 with the SIM inserted and now I get:

                              at+cpin?
                              +CPIN: READY
                              OK
                              at+cimi
                              204080830238557
                              OK
                              

                              However, still no PPP connection. Same logs as previously, tries to connect, authenticates ok, no IP, terminates process.
                              Have double-checked the APN name which is correct from the SIM supplier.
                              😞

                              stephenw10S 1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator @mphodge
                                last edited by

                                I don't think it's the SIM. Or at least not the connectivity to it. When you tested it without the SIM did you reboot in between? I'm not sure when the modem actually queries it but I'd be amazed it got that far without any SIM present.

                                1 Reply Last reply Reply Quote 0
                                • Dobby_D
                                  Dobby_
                                  last edited by

                                  I saw your picture (2100 with the modem), please connect the antennas even
                                  before your empower the modem, the antennas are grounding the modem
                                  device!!! (electric grounding)

                                  Is this a M.2 modem? Are the antennas also made for M.2 or only for miniPCIe?
                                  There are differences between.

                                  There are two modes DIP (direct IP) or QMI (Qualcomm MSM Interface),
                                  I use a Sierra Wireless 7710 LTE modem and must set it up to the DIP
                                  mode, until it was not working for me in pfSense.

                                  Finding out the mode for my modem was marching this way;

                                  [24.03-RC][root@xxx.xxx]/root: usbconfig
                                  ugen1.1: <AMD EHCI root HUB> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAV                            E (0mA)
                                  ugen0.1: <AMD XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SA                            VE (0mA)
                                  ugen2.1: <AMD EHCI root HUB> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAV                            E (0mA)
                                  ugen1.2: <vendor 0x0438 product 0x7900> at usbus1, cfg=0 md=HOST spd=HIGH (480Mb                            ps) pwr=SAVE (100mA)
                                  ugen2.2: <vendor 0x0438 product 0x7900> at usbus2, cfg=0 md=HOST spd=HIGH (480Mb                            ps) pwr=SAVE (100mA)
                                  ugen2.3: <u-blox AG - www.u-blox.com u-blox 6  -  GPS Receiver> at usbus2, cfg=0                             md=HOST spd=FULL (12Mbps) pwr=ON (100mA)
                                  ugen0.2: <Sierra Wireless, Incorporated MC7710> at usbus0, cfg=0 md=HOST spd=HIG                            H (480Mbps) pwr=ON (0mA)
                                  
                                  
                                  [24.03-RC][root@xxx.xxx]/root: usbconfig -d 0.2 dump_device_desc
                                  ugen0.2: <Sierra Wireless, Incorporated MC7710> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (0mA)
                                  
                                    bLength = 0x0012
                                    bDescriptorType = 0x0001
                                    bcdUSB = 0x0200
                                    bDeviceClass = 0x0000  <Probed by interface class>
                                    bDeviceSubClass = 0x0000
                                    bDeviceProtocol = 0x0000
                                    bMaxPacketSize0 = 0x0040
                                    idVendor = 0x1199
                                    idProduct = 0x68a3
                                    bcdDevice = 0x0006
                                    iManufacturer = 0x0003  <Sierra Wireless, Incorporated>
                                    iProduct = 0x0002  <MC7710>
                                    iSerialNumber = 0x0004  <358178041368210>
                                    bNumConfigurations = 0x0001
                                  
                                  

                                  This command shows the USB PID

                                  usbconfig -d 0.2 dump_device_desc
                                  

                                  68A2 = QMI mode
                                  68A3 = DIP mode

                                  1199:68a2 - MC7710 in QMI mode
                                  1199:68a3 - MC7710 in DirectIP mode

                                  I was using this toll here for setting the modem to the DIP mode:
                                  DIP_QMI mode switch tool

                                  Insert the modem and the SIM card, boot the pfSense, after boot up go via console (Putty) and set up the following commands to find out more;

                                  # connects to the modem
                                  cu -l /dev/cuaU0.2
                                  answer or oputput will be "Connected
                                  
                                  # puts the modem in verbose mode
                                  AT+CMEE=2
                                  
                                  # Shows the vendor and bands
                                  ATI
                                  
                                  # proofing the SIM / PIN
                                  AT+cpin?
                                  
                                  # Proofing the signal strength of the Band/Antenna
                                  AT+CSQ
                                  
                                  # is scanning the available networks
                                  AT+COPS=?
                                  
                                  # Check the mobile phone activity status 
                                  AT+CPAS
                                  
                                  # shows the modem.log
                                  tail -f /var/log/ppp.log
                                  

                                  You can also try out to set the modem into the DIP mode by using this:

                                  AT!ENTERCND="A710"
                                  AT!UDPID=68A3
                                  AT!RESE
                                  

                                  #~. @Dobby

                                  Turris Omnia - 4 Ports - 2 GB RAM / TurrisOS 7 Release (Btrfs)
                                  PC Engines APU4D4 - 4 Ports - 4 GB RAM / pfSense CE 2.7.2 Release (ZFS)
                                  PC Engines APU6B4 - 4 Ports - 4 GB RAM / pfSense+ (Plus) 24.03_1 Release (ZFS)

                                  1 Reply Last reply Reply Quote 0
                                  • stephenw10S
                                    stephenw10 Netgate Administrator
                                    last edited by

                                    Most of that shouldn't be required on the EM7455. Since it's presenting an AT interface it must be running an appropriate composition.

                                    1 Reply Last reply Reply Quote 0
                                    • M
                                      mphodge
                                      last edited by

                                      This is what I get from usbconfig:
                                      617d5b62-181b-4f37-b5fd-5132a710135d-image.png

                                      1 Reply Last reply Reply Quote 0
                                      • M
                                        mphodge
                                        last edited by

                                        Sorry had to screen shot as the site thought I was posting spam for some reason!
                                        Output from modem:

                                        cu -l /dev/cuaU0.2
                                        Connected
                                        
                                        at+cmee=2
                                        OK
                                        
                                        ati
                                        Manufacturer: Sierra Wireless, Incorporated
                                        Model: EM7455
                                        Revision: SWI9X30C_02.38.00.00 rE3F3E55C03AE94 jenkins 2022/01/13 05:16:00
                                        MEID: 35399007355869
                                        IMEI: 353990073558699
                                        IMEI SV: 22
                                        FSN: LF641313650210
                                        +GCAP: +CGSM,+DS,+ES
                                        OK
                                        
                                        at+cpin?
                                        +CPIN: READY
                                        OK
                                        
                                        at+csq
                                        +csq: 8,99
                                        OK
                                        
                                        at+cops=?
                                        +cops: (2,"3 UK","3 UK","23420",2),,(0,1,2,3,4),(0,1,2)
                                        OK
                                        
                                        at+cpas
                                        +CPAS: 0
                                        OK
                                        

                                        The PPP still does not connect. Any ideas for next step?

                                        1 Reply Last reply Reply Quote 0
                                        • stephenw10S
                                          stephenw10 Netgate Administrator
                                          last edited by

                                          Hmm, this feels like it has to be the provider. Though that's hard to explain because I'm using "3 UK" and it works fine.

                                          Did you test without the SIM in after rebooting? Just make sure it fails earlier in the process.

                                          1 Reply Last reply Reply Quote 0
                                          • Dobby_D
                                            Dobby_
                                            last edited by

                                            at+cpas
                                            +CPAS: 0
                                            OK
                                            

                                            0 = Ready (Mobile Termination (MT) allows commands from Terminal Adapter (TA)/Terminal Equipment (TE))

                                            at+csq
                                            +csq: 8,99
                                            OK
                                            

                                            I would have a look here to that tables, they are very good explaining the
                                            signal strength and it may be brings you to change the position of your
                                            pfSense box to get a better or excellent signal strength. Often are antennas with a 1/2 meter cable and a magnetic stand will be able to let the router
                                            where it is but you get also a better signal. LTE Signal strength

                                            at+cops=?
                                            +cops: (2,"3 UK","3 UK","23420",2),,(0,1,2,3,4),(0,1,2)
                                            OK
                                            

                                            This are the available networks you may be able to reach from your router.
                                            Here you may be able to see another output with very excellent
                                            area roaming as an example.

                                            +COPS: (1,"3 UK","3 UK","23420",2),(1,"Orange F","Orange","20801",7),
                                            (1,"F-Bouygues Telecom","BYTEL","20820",7),(1,"F SFR","SFR","20810",2),
                                            (1,"Free","Free","20815",7),(1,"Airtel-Vodafone","ATL-VOD","23403",7),
                                            (1,"Airtel-Vodafone","ATL-VOD","23403",2),(1,"JT","JT","23450",7),
                                            (1,"Sure","Sure","23455",7),(1,"JT","JT","23450",2),(1,"Sure","Sure","23455",2),
                                            (1,"vodafone UK","voda UK","23415",2),(1,"EE","EE","23430",2),
                                            (1,"O2 - UK","O2 - UK","23410",2),(1,"208 16","208 16","20816",7),,(0-4),(0-2)
                                            

                                            So perhaps you may be put the router to another place to get better results.

                                            3 UK","23420"
                                            

                                            But anyway, this is the interesting part for you, the 5 digit number is
                                            presenting your region; 23420 = Hutchinson 3G (3) – United Kingdom

                                            #~. @Dobby

                                            Turris Omnia - 4 Ports - 2 GB RAM / TurrisOS 7 Release (Btrfs)
                                            PC Engines APU4D4 - 4 Ports - 4 GB RAM / pfSense CE 2.7.2 Release (ZFS)
                                            PC Engines APU6B4 - 4 Ports - 4 GB RAM / pfSense+ (Plus) 24.03_1 Release (ZFS)

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.