Can't gif0 create from GUI

[passatiji]

Can You show me step by step how to make this from GUI?

ifconfig gif0 create
ifconfig gif0 192.168.4.1 192.168.0.1
ifconfig gif0 tunnel "my iP" "other iP"
route add 192.168.0.0 192.168.0.1 255.255.255.0
route add 192.168.1.0 192.168.0.1 255.255.255.0
route add 192.168.2.0 192.168.0.1 255.255.255.0
route add 192.168.3.0 192.168.0.1 255.255.255.0

If I write this from shell all is OK.
I using:
1.3-ALPHA-ALPHA
built on Fri Sep 12 00:58:57 EDT 2008
FreeBSD 7.0-RELEASE-p4

[eri--]

Interface assign-> Gif's create one.
System ->Routing -> Static routes for the others

[passatiji]

Thanks!!!

[passatiji]

When I add gif0 from GUI
gif0: flags=8051 <up,pointopoint,running,multicast>metric 0 mtu 1280
        tunnel inet "myip" –> "gwip"
        inet 192.168.4.1 --> 192.168.0.1 netmask 0xffffffff
        inet6 fe80::2e0:4cff:fe4d:9a38%gif0 prefixlen 64 scopeid 0x9
netmask defer from manual creation
gif0: flags=8051 <up,pointopoint,running,multicast>metric 0 mtu 1280
        tunnel inet "myip" --> "gwip"
        inet 192.168.4.1 --> 192.168.0.1 netmask 0xffffff00
        inet6 fe80::2e0:4cff:fe4d:9a38%gif0 prefixlen 64 scopeid 0x9
How can I change this?</up,pointopoint,running,multicast></up,pointopoint,running,multicast>

[eri--]

grab next snapshot/upgrade and specify the sybnet bits on the remote tunnel part.

[passatiji]

Problem solved! Thanks for help.
It works on 128Mb IDE Flash with Disk usage 85%
Realy great work!
Thanks!