Access OPT1 through the IPSEC VPN
-
I builded a IPSEC VPN channel between 2 pfsense 1.2.3.
Site A: LAN : 10.10.0.0/23
Site B: LAN:192.168.0.0
OPT1:192.168.100.0IPsec vpn created between WAN port in pfsense.
Now, IPsec vpn is ok , I can access B site LAN from site A LAN, but I can't access SITE B OPT1 from SITE A,
How should I do? Please advise. -
Hello,
We have the same problem. Our solution is to create a 2nd IPSec Tunnel with the Subnet of the Opt1 as the remote Network.
I can not say that this works good or not so good. Because we have some problem with the ipsec itself.
Another way was to setup a static route but this doesnt worked. The PFsense sends the Packages to the default gateway witch was the wan in our case.Regards from Cologne (Germany)
-
Could you show me more detail info, how build ipsec vpn from WAN port (site A) to OPT port (site B)
-
Ill give it another try tomorrowm because in the last hours i made some changes and now? Exactly its doens work anymore. After that i will post what happend :-)
-
Hm, so seen from now it works… i think so :-)
We have 2 pfsense Boxes connected via the internet. both have at least 1 static ip on wan side.
The 1st Box hast just a LAN and WAN interface.
The 2nd Box hast a LAN,OPT1 and WAN interface.The goal was to integrade the 1st Box to our land behind the 2nd box. For this we created 2 IPSEC tunnel:
1. connects LAN/Box1 to Lan/Box2
2. connects LANBox1 to Opt1/Box2So the users in the Lan on Box1 can now acces the Lan and Opt1 of Box2.
Seen form Box 2 there are now 2 way to get packages to the Lan on Box1.... what ever - it works. Will see what the next days will bring to us.
Regards from Germany
-
2. connects LANBox1 to Opt1/Box2
how to do that ?
-
Just Setup 2 tunnels/connections as this 2 would be the only one by them self. By the way. my ipsecs crashs all the time. I do not know why but its not very stable at this point. Maybe this is not the right solution :-)