Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Dell PowerEdge R510 keeps locking up on install

    Scheduled Pinned Locked Moved Hardware
    19 Posts 4 Posters 11.7k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • G
      guiparm
      last edited by

      Hi,

      i'm sorry, i can't help you, but can you give me your configuration for your server please. Just the feature of the RAID controller because i have a r310 RAID0 with the perc H200 and no driver exist for this controller…  :'(

      1 Reply Last reply Reply Quote 0
      • T
        the.it.dude
        last edited by

        The RAID Controller is a SAS 6IR with (2) 250 GB SATA drives in a RAID-1.  (The OS appears to see the drives fine)

        The Dell Diagnostics pass and memtest passes.

        I can boot to the CD fine and walk through the wizard.  Sometimes it locks up when I plug the ethernet cable in during autodetect.  Sometimes it makes it through the wizard and locks up when "writing the configuration".  Sometimes it locks up during the install of the config to the hard drive (Option 99)

        Note:  I still have keyboard response.  I can even push the power button and initiate an orderly shutdown.  It's just the wizard that appears to get hung.

        I've gone through the BIOS and disabled all the CPU options, Power Saving, Memory, etc.

        I have been able to get the config and install to finish, with everything in the BIOS disabled.  However, going back and re-enabling things one by one (in order to isolate the issue) returns random results.  (Making it difficult to isolate)

        I'm now testing another scenario… I've pulled out the (2) Intel Gigabit ET Quad Port NICs and set all the bios settings back to the default.  I'll post back with the results...

        1 Reply Last reply Reply Quote 0
        • T
          the.it.dude
          last edited by

          Same problem with Intel NICs pulled.

          This time it hung at "Writing Configuration" again.

          1 Reply Last reply Reply Quote 0
          • G
            guiparm
            last edited by

            Try a external USB cdrom…. and check the MD5 of the .iso

            1 Reply Last reply Reply Quote 0
            • T
              the.it.dude
              last edited by

              I did check the MD5 of both 32 & 64 bit versions before I even started.

              I've now been able to successfully load and install 5 times in a row with the Intel Cards removed and the following BIOS settings:

              Processor Settings

              • Number of Cores per Processor = Single

              • C States = Disabled

              Integrated Devices

              • PXE boot disabled on NIC1

              • User Accessible USB Ports = Only Back Ports On

              Moved IRQ Assignments around for devices

              Power Management Set to "Max Performance"

              Now I've played with different combinations of these settings before (with the Intel NICs installed) and did not have consistent success.  ???

              I'll try re-installing the Intel NICs and see what happens with these same BIOS settings.

              1 Reply Last reply Reply Quote 0
              • G
                guiparm
                last edited by

                Try disable also the Bios configuration options, under 'Processor Settings', there is this: Virtualization Technology….

                1 Reply Last reply Reply Quote 0
                • T
                  the.it.dude
                  last edited by

                  On this server, the Virtualization setting is disabled by default.  (I've also tried enabling it as well)

                  I just put the NICs back in and had problems again.  This time the setup completed fine.  When I selected Option 99 to install to the hard drive I got the normal blue screen asking for the keyboard/regional settings, etc.  I selected Accept Settings as usual and then the next screen never loads (Just a blank blue screen).  I can hit <ctrl><c>to get back to the menu, but subsequent attempts to install to the hard drive just displays a blue screen with a message at the bottom saying "Waiting for backend"

                  I just tried moving IRQs around again and will do more testing…</c></ctrl>

                  1 Reply Last reply Reply Quote 0
                  • T
                    the.it.dude
                    last edited by

                    Moving IRQs resulted in the same issue… blank blue screen when trying to install to the hard drive.

                    I then tried a USB DVD Drive to run the install from.  Same exact result.

                    It's starting to look like something related to the Intel Quad Port NICs  (Maybe not... Had a hang after pulling nics)

                    Continuing to test...

                    1 Reply Last reply Reply Quote 0
                    • T
                      the.it.dude
                      last edited by

                      I've discovered that removing 1 of the quad port nic's enables consistent configuration and installation.  (Doesn't matter which nic)  As soon as I put the 2nd quad port nic in, I have problems.  I'm now trying to figure out why having both nic's installed causes problems…

                      1 Reply Last reply Reply Quote 0
                      • T
                        the.it.dude
                        last edited by

                        Now I'm ticked…

                        I just ordered 2 new Dell PE servers for production firewalls:

                        R410 = 1 Dual Core CPU, SAS6ir, 1 Dual Port Broadcom NIC
                        R510 = 2 Dual Core CPUs, SAS6ir, 2 Quad Port Intel NICs

                        Having same issues with both servers!  This has got to be a freebsd thing, right?  Tomorrow, I'm going to try to load Untangle and see what happens.  My only other thought was to install ESXi and run pfSense as a VM.  But, I'm not real thrilled about that.

                        1 Reply Last reply Reply Quote 0
                        • W
                          wallabybob
                          last edited by

                          @the.it.dude:

                          I've discovered that removing 1 of the quad port nic's enables consistent configuration and installation.  (Doesn't matter which nic)  As soon as I put the 2nd quad port nic in, I have problems.  I'm now trying to figure out why having both nic's installed causes problems…

                          By I have problems do you mean the system locks up?

                          Are the two quad port NICs indentical parts?

                          Please post the output of the pfSense shell command # dmesg; vmstat -i on system with only one of the quad port NICs.

                          @the.it.dude:

                          Having same issues with both servers!

                          What issues exactly? If you can't install on the R410 you could clone the disk from the R410 and use the clone in the R410 to get over the install problem. Does the R410 have two onboard NICs? If not, does it behave better with only one NIC in the system? Do you know if they are bce or bge NICs?

                          1 Reply Last reply Reply Quote 0
                          • T
                            the.it.dude
                            last edited by

                            OK, Long Post.  But, everything should be in here now…  I'll create 2 seperate posts for the R410 & the R510:

                            R410

                            2 Internal NICs = Broadcom BCM5716 (bce)
                            Add-in Dual Port NIC = Broadcom BCM5709 (bce)

                            1st Test

                            Add-in NIC removed and BIOS settings all set to default
                            Everything OK!

                            R410 w/o NIC installed

                            $ dmesg; vmstat -i
                            Copyright © 1992-2010 The FreeBSD Project.
                            Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                            The Regents of the University of California. All rights reserved.
                            FreeBSD is a registered trademark of The FreeBSD Foundation.
                            FreeBSD 8.1-RELEASE-p2 #0: Sat Feb 26 18:05:58 EST 2011
                                root@FreeBSD_8.0_pfSense_2.0-AMD64.snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
                            Timecounter "i8254" frequency 1193182 Hz quality 0
                            CPU: Intel(R) Xeon(R) CPU          E5503  @ 2.00GHz (1995.01-MHz K8-class CPU)
                              Origin = "GenuineIntel"  Id = 0x106a5  Family = 6  Model = 1a  Stepping = 5
                              Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x9ce3bd <sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt>AMD Features=0x28100800 <syscall,nx,rdtscp,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant
                            real memory  = 2147483648 (2048 MB)
                            avail memory = 2037293056 (1942 MB)
                            ACPI APIC Table: <dell  pe_sc3 ="">FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
                            FreeBSD/SMP: 1 package(s) x 2 core(s)
                            cpu0 (BSP): APIC ID: 16
                            cpu1 (AP): APIC ID: 20
                            ioapic1: Changing APIC ID to 1
                            ioapic0 <version 2.0="">irqs 0-23 on motherboard
                            ioapic1 <version 2.0="">irqs 32-55 on motherboard
                            wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
                            wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
                            module_register_init: MOD_LOAD (wpi_fw, 0xffffffff806512b0, 0) error 1
                            ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                            ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                            module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8046d080, 0) error 1
                            ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                            ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                            module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8046d120, 0) error 1
                            wlan: mac acl policy registered
                            ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                            ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                            module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8046d1c0, 0) error 1
                            kbd1 at kbdmux0
                            cryptosoft0: <software crypto="">on motherboard
                            padlock0: No ACE support.
                            acpi0: <dell pe_sc3="">on motherboard
                            acpi0: [ITHREAD]
                            acpi0: Power Button (fixed)
                            Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
                            acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
                            cpu0: <acpi cpu="">on acpi0
                            cpu1: <acpi cpu="">on acpi0
                            acpi_hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0
                            Timecounter "HPET" frequency 14318180 Hz quality 900
                            pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
                            pci0: <acpi pci="" bus="">on pcib0
                            pcib1: <acpi pci-pci="" bridge="">at device 1.0 on pci0
                            pci1: <acpi pci="" bus="">on pcib1
                            bce0: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xda000000-0xdbffffff irq 36 at device 0.0 on pci1
                            miibus0: <mii bus="">on bce0
                            brgphy0: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus0
                            brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
                            bce0: [ITHREAD]
                            bce0: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
                            bce1: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xdc000000-0xddffffff irq 48 at device 0.1 on pci1
                            miibus1: <mii bus="">on bce1
                            brgphy1: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus1
                            brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
                            bce1: [ITHREAD]
                            bce1: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
                            pcib2: <acpi pci-pci="" bridge="">at device 3.0 on pci0
                            pci2: <acpi pci="" bus="">on pcib2
                            mpt0: <lsilogic sas="" sata="" adapter="">port 0xfc00-0xfcff mem 0xdf2ec000-0xdf2effff,0xdf2f0000-0xdf2fffff irq 32 at device 0.0 on pci2
                            mpt0: [ITHREAD]
                            mpt0: MPI Version=1.5.18.0
                            mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
                            mpt0: 1 Active Volume (2 Max)
                            mpt0: 2 Hidden Drive Members (14 Max)
                            pcib3: <acpi pci-pci="" bridge="">at device 7.0 on pci0
                            pci3: <acpi pci="" bus="">on pcib3
                            pci0: <base peripheral,="" interrupt="" controller=""> at device 20.0 (no driver attached)
                            pci0: <base peripheral,="" interrupt="" controller=""> at device 20.1 (no driver attached)
                            pci0: <base peripheral,="" interrupt="" controller=""> at device 20.2 (no driver attached)
                            uhci0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">port 0xec40-0xec5f irq 17 at device 26.0 on pci0
                            uhci0: [ITHREAD]
                            usbus0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">on uhci0
                            uhci1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">port 0xec60-0xec7f irq 18 at device 26.1 on pci0
                            uhci1: [ITHREAD]
                            usbus1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">on uhci1
                            ehci0: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">mem 0xdf0fe000-0xdf0fe3ff irq 19 at device 26.7 on pci0
                            ehci0: [ITHREAD]
                            usbus2: EHCI version 1.0
                            usbus2: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">on ehci0
                            uhci2: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">port 0xec80-0xec9f irq 21 at device 29.0 on pci0
                            uhci2: [ITHREAD]
                            usbus3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">on uhci2
                            uhci3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">port 0xeca0-0xecbf irq 20 at device 29.1 on pci0
                            uhci3: [ITHREAD]
                            usbus4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">on uhci3
                            uhci4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">port 0xecc0-0xecdf irq 21 at device 29.2 on pci0
                            uhci4: [ITHREAD]
                            usbus5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">on uhci4
                            uhci5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">port 0xece0-0xecff irq 20 at device 29.3 on pci0
                            uhci5: [ITHREAD]
                            usbus6: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">on uhci5
                            ehci1: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">mem 0xdf0ff000-0xdf0ff3ff irq 21 at device 29.7 on pci0
                            ehci1: [ITHREAD]
                            usbus7: EHCI version 1.0
                            usbus7: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">on ehci1
                            pcib4: <acpi pci-pci="" bridge="">at device 30.0 on pci0
                            pci4: <acpi pci="" bus="">on pcib4
                            vgapci0: <vga-compatible display="">mem 0xd9800000-0xd9ffffff,0xde7fc000-0xde7fffff,0xde800000-0xdeffffff irq 19 at device 3.0 on pci4
                            isab0: <pci-isa bridge="">at device 31.0 on pci0
                            isa0: <isa bus="">on isab0
                            atapci0: <intel ich10="" sata300="" controller="">port 0xe8e0-0xe8e7,0xe8d0-0xe8d3,0xe8e8-0xe8ef,0xe8d4-0xe8d7,0xec00-0xec0f,0xec10-0xec1f irq 23 at device 31.2 on pci0
                            atapci0: [ITHREAD]
                            ata2: <ata 0="" channel="">on atapci0
                            ata2: [ITHREAD]
                            ata3: <ata 1="" channel="">on atapci0
                            ata3: [ITHREAD]
                            atapci1: <intel ich10="" sata300="" controller="">port 0xe8f0-0xe8f7,0xe8d8-0xe8db,0xe8f8-0xe8ff,0xe8dc-0xe8df,0xec20-0xec2f,0xec30-0xec3f irq 22 at device 31.5 on pci0
                            atapci1: [ITHREAD]
                            ata4: <ata 0="" channel="">on atapci1
                            ata4: [ITHREAD]
                            ata5: <ata 1="" channel="">on atapci1
                            ata5: [ITHREAD]
                            atrtc0: <at realtime="" clock="">port 0x70-0x7f irq 8 on acpi0
                            uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                            uart0: [FILTER]
                            uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
                            uart1: [FILTER]
                            orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xce000-0xcefff,0xec000-0xeffff on isa0
                            sc0: <system console="">at flags 0x100 on isa0
                            sc0: VGA <16 virtual consoles, flags=0x300>
                            vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
                            atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
                            atkbd0: <at keyboard="">irq 1 on atkbdc0
                            kbd0 at atkbd0
                            atkbd0: [GIANT-LOCKED]
                            atkbd0: [ITHREAD]
                            ppc0: cannot reserve I/O port range
                            est0: <enhanced speedstep="" frequency="" control="">on cpu0
                            est: CPU supports Enhanced Speedstep, but is not recognized.
                            est: cpu_vendor GenuineIntel, msr f
                            device_attach: est0 attach returned 6
                            p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
                            est1: <enhanced speedstep="" frequency="" control="">on cpu1
                            est: CPU supports Enhanced Speedstep, but is not recognized.
                            est: cpu_vendor GenuineIntel, msr f
                            device_attach: est1 attach returned 6
                            p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
                            Timecounters tick every 1.000 msec
                            IPsec: Initialized Security Association Processing.
                            usbus0: 12Mbps Full Speed USB v1.0
                            usbus1: 12Mbps Full Speed USB v1.0
                            usbus2: 480Mbps High Speed USB v2.0
                            usbus3: 12Mbps Full Speed USB v1.0
                            usbus4: 12Mbps Full Speed USB v1.0
                            usbus5: 12Mbps Full Speed USB v1.0
                            usbus6: 12Mbps Full Speed USB v1.0
                            usbus7: 480Mbps High Speed USB v2.0
                            mpt0:vol0(mpt0:0:0): Settings ( Member-WCE Hot-Plug-Spares High-Priority-ReSync )ugen0.1: <intel>at usbus0
                            uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
                            ugen1.1: <intel>at usbus1
                            uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
                            ugen2.1: <intel>at usbus2
                            uhub2: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus2
                            ugen3.1: <intel>at usbus3
                            uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
                            ugen4.1: <intel>at usbus4
                            uhub4: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus4
                            ugen5.1: <intel>at usbus5
                            uhub5: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus5
                            ugen6.1: <intel>at usbus6
                            uhub6: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus6
                            ugen7.1: <intel>at usbus7
                            uhub7: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus7

                            mpt0:vol0(mpt0:0:0): Using Spare Pool: 0
                            mpt0:vol0(mpt0:0:0): 2 Members:
                                  (mpt0:1:8:0): Primary Online
                                  (mpt0:1:1:0): Secondary Online
                            mpt0:vol0(mpt0:0:0): RAID-1 - Optimal
                            mpt0:vol0(mpt0:0:0): Status ( Enabled )
                            (mpt0:vol0:1): Physical (mpt0:0:1:0), Pass-thru (mpt0:1:0:0)
                            (mpt0:vol0:1): Online
                            (mpt0:vol0:0): Physical (mpt0:0:8:0), Pass-thru (mpt0:1:1:0)
                            (mpt0:vol0:0): Online
                            uhub0: 2 ports with 2 removable, self powered
                            uhub1: 2 ports with 2 removable, self powered
                            uhub3: 2 ports with 2 removable, self powered
                            uhub4: 2 ports with 2 removable, self powered
                            uhub5: 2 ports with 2 removable, self powered
                            uhub6: 2 ports with 2 removable, self powered
                            uhub2: 4 ports with 4 removable, self powered
                            uhub7: 4 ports with 4 removable, self powered
                            pass1 at mpt0 bus 1 scbus1 target 0 lun 0
                            pass1: <ata wdc="" wd2502abys-1="" 3b05="">Fixed Uninstalled SCSI-5 device
                            pass1: 300.000MB/s transfers
                            pass1: Command Queueing enabled
                            da0 at mpt0 bus 0 scbus0 target 0 lun 0
                            da0: <dell 1028="" virtual="" disk="">Fixed Direct Access SCSI-5 device
                            da0: 300.000MB/s transfers
                            da0: Command Queueing enabled
                            da0: 237824MB (487063552 512 byte sectors: 255H 63S/T 30318C)
                            acd0: DVDROM <teac dvd-rom="" dv-28sw="" r.2a="">at ata4-master UDMA100 SATA 1.5Gb/s
                            SMP: AP CPU #1 Launched!
                            ugen2.2: <vendor 0x0424="">at usbus2
                            uhub8: <vendor 2="" 9="" 0x0424="" product="" 0x2514,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus2
                            ugen0.2: <dell>at usbus0
                            ukbd0: <ep1 interrupt="">on usbus0
                            kbd2 at ukbd0
                            uhub8: 2 ports with 2 removable, self powered
                            Trying to mount root from cd9660:/dev/iso9660/pfSense
                            md0.uzip: 3159 x 65536 blocks
                            pflog0: promiscuous mode enabled
                            interrupt                          total      rate
                            irq17: uhci0                          49          0
                            irq19: ehci0                        147          0
                            irq22: atapci1                      3746        14
                            irq32: mpt0                          425          1
                            cpu0: timer                      502014      1976
                            irq256: bce0                          1          0
                            irq257: bce1                        753          2
                            cpu1: timer                      493465      1942
                            Total                            1000600      3939

                            2nd Test

                            Install Add-in Dual Port NIC to already installed pfSense on hard drive
                            Assign Interfaces
                            Everything OK!

                            R410 w/ NIC Installed

                            $ dmesg; vmstat -i
                            Copyright © 1992-2010 The FreeBSD Project.
                            Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                            The Regents of the University of California. All rights reserved.
                            FreeBSD is a registered trademark of The FreeBSD Foundation.
                            FreeBSD 8.1-RELEASE-p2 #0: Sat Feb 26 18:05:58 EST 2011
                                root@FreeBSD_8.0_pfSense_2.0-AMD64.snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
                            Timecounter "i8254" frequency 1193182 Hz quality 0
                            CPU: Intel(R) Xeon(R) CPU          E5503  @ 2.00GHz (1995.01-MHz K8-class CPU)
                              Origin = "GenuineIntel"  Id = 0x106a5  Family = 6  Model = 1a  Stepping = 5
                              Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x9ce3bd <sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt>AMD Features=0x28100800 <syscall,nx,rdtscp,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant
                            real memory  = 2147483648 (2048 MB)
                            avail memory = 2037805056 (1943 MB)
                            ACPI APIC Table: <dell  pe_sc3 ="">FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
                            FreeBSD/SMP: 1 package(s) x 2 core(s)
                            cpu0 (BSP): APIC ID: 16
                            cpu1 (AP): APIC ID: 20
                            ioapic1: Changing APIC ID to 1
                            ioapic0 <version 2.0="">irqs 0-23 on motherboard
                            ioapic1 <version 2.0="">irqs 32-55 on motherboard
                            wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
                            wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
                            module_register_init: MOD_LOAD (wpi_fw, 0xffffffff806512b0, 0) error 1
                            ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                            ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                            module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8046d080, 0) error 1
                            ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                            ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                            module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8046d120, 0) error 1
                            wlan: mac acl policy registered
                            ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                            ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                            module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8046d1c0, 0) error 1
                            kbd1 at kbdmux0
                            cryptosoft0: <software crypto="">on motherboard
                            padlock0: No ACE support.
                            acpi0: <dell pe_sc3="">on motherboard
                            acpi0: [ITHREAD]
                            acpi0: Power Button (fixed)
                            Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
                            acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
                            cpu0: <acpi cpu="">on acpi0
                            cpu1: <acpi cpu="">on acpi0
                            acpi_hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0
                            Timecounter "HPET" frequency 14318180 Hz quality 900
                            pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
                            pci0: <acpi pci="" bus="">on pcib0
                            pcib1: <acpi pci-pci="" bridge="">at device 1.0 on pci0
                            pci1: <acpi pci="" bus="">on pcib1
                            bce0: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xd6000000-0xd7ffffff irq 36 at device 0.0 on pci1
                            miibus0: <mii bus="">on bce0
                            brgphy0: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus0
                            brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
                            bce0: [ITHREAD]
                            bce0: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
                            bce1: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xd8000000-0xd9ffffff irq 48 at device 0.1 on pci1
                            miibus1: <mii bus="">on bce1
                            brgphy1: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus1
                            brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
                            bce1: [ITHREAD]
                            bce1: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
                            pcib2: <acpi pci-pci="" bridge="">at device 3.0 on pci0
                            pci2: <acpi pci="" bus="">on pcib2
                            mpt0: <lsilogic sas="" sata="" adapter="">port 0xfc00-0xfcff mem 0xdf2ec000-0xdf2effff,0xdf2f0000-0xdf2fffff irq 32 at device 0.0 on pci2
                            mpt0: [ITHREAD]
                            mpt0: MPI Version=1.5.18.0
                            mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
                            mpt0: 1 Active Volume (2 Max)
                            mpt0: 2 Hidden Drive Members (14 Max)
                            pcib3: <acpi pci-pci="" bridge="">at device 7.0 on pci0
                            pci3: <acpi pci="" bus="">on pcib3
                            bce2: <broadcom netxtreme="" ii="" bcm5709="" 1000base-t="" (c0)="">mem 0xda000000-0xdbffffff irq 38 at device 0.0 on pci3
                            miibus2: <mii bus="">on bce2
                            brgphy2: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus2
                            brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
                            bce2: [ITHREAD]
                            bce2: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI)
                            bce3: <broadcom netxtreme="" ii="" bcm5709="" 1000base-t="" (c0)="">mem 0xdc000000-0xddffffff irq 45 at device 0.1 on pci3
                            miibus3: <mii bus="">on bce3
                            brgphy3: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus3
                            brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
                            bce3: [ITHREAD]
                            bce3: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI)
                            pci0: <base peripheral,="" interrupt="" controller=""> at device 20.0 (no driver attached)
                            pci0: <base peripheral,="" interrupt="" controller=""> at device 20.1 (no driver attached)
                            pci0: <base peripheral,="" interrupt="" controller=""> at device 20.2 (no driver attached)
                            uhci0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">port 0xec40-0xec5f irq 17 at device 26.0 on pci0
                            uhci0: [ITHREAD]
                            usbus0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">on uhci0
                            uhci1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">port 0xec60-0xec7f irq 18 at device 26.1 on pci0
                            uhci1: [ITHREAD]
                            usbus1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">on uhci1
                            ehci0: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">mem 0xdf0fe000-0xdf0fe3ff irq 19 at device 26.7 on pci0
                            ehci0: [ITHREAD]
                            usbus2: EHCI version 1.0
                            usbus2: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">on ehci0
                            uhci2: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">port 0xec80-0xec9f irq 21 at device 29.0 on pci0
                            uhci2: [ITHREAD]
                            usbus3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">on uhci2
                            uhci3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">port 0xeca0-0xecbf irq 20 at device 29.1 on pci0
                            uhci3: [ITHREAD]
                            usbus4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">on uhci3
                            uhci4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">port 0xecc0-0xecdf irq 21 at device 29.2 on pci0
                            uhci4: [ITHREAD]
                            usbus5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">on uhci4
                            uhci5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">port 0xece0-0xecff irq 20 at device 29.3 on pci0
                            uhci5: [ITHREAD]
                            usbus6: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">on uhci5
                            ehci1: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">mem 0xdf0ff000-0xdf0ff3ff irq 21 at device 29.7 on pci0
                            ehci1: [ITHREAD]
                            usbus7: EHCI version 1.0
                            usbus7: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">on ehci1
                            pcib4: <acpi pci-pci="" bridge="">at device 30.0 on pci0
                            pci4: <acpi pci="" bus="">on pcib4
                            vgapci0: <vga-compatible display="">mem 0xd5800000-0xd5ffffff,0xde7fc000-0xde7fffff,0xde800000-0xdeffffff irq 19 at device 3.0 on pci4
                            isab0: <pci-isa bridge="">at device 31.0 on pci0
                            isa0: <isa bus="">on isab0
                            atapci0: <intel ich10="" sata300="" controller="">port 0xe8e0-0xe8e7,0xe8d0-0xe8d3,0xe8e8-0xe8ef,0xe8d4-0xe8d7,0xec00-0xec0f,0xec10-0xec1f irq 23 at device 31.2 on pci0
                            atapci0: [ITHREAD]
                            ata2: <ata 0="" channel="">on atapci0
                            ata2: [ITHREAD]
                            ata3: <ata 1="" channel="">on atapci0
                            ata3: [ITHREAD]
                            atapci1: <intel ich10="" sata300="" controller="">port 0xe8f0-0xe8f7,0xe8d8-0xe8db,0xe8f8-0xe8ff,0xe8dc-0xe8df,0xec20-0xec2f,0xec30-0xec3f irq 22 at device 31.5 on pci0
                            atapci1: [ITHREAD]
                            ata4: <ata 0="" channel="">on atapci1
                            ata4: [ITHREAD]
                            ata5: <ata 1="" channel="">on atapci1
                            ata5: [ITHREAD]
                            atrtc0: <at realtime="" clock="">port 0x70-0x7f irq 8 on acpi0
                            uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                            uart0: [FILTER]
                            uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
                            uart1: [FILTER]
                            orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xce000-0xcefff,0xec000-0xeffff on isa0
                            sc0: <system console="">at flags 0x100 on isa0
                            sc0: VGA <16 virtual consoles, flags=0x300>
                            vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
                            atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
                            atkbd0: <at keyboard="">irq 1 on atkbdc0
                            kbd0 at atkbd0
                            atkbd0: [GIANT-LOCKED]
                            atkbd0: [ITHREAD]
                            ppc0: cannot reserve I/O port range
                            est0: <enhanced speedstep="" frequency="" control="">on cpu0
                            est: CPU supports Enhanced Speedstep, but is not recognized.
                            est: cpu_vendor GenuineIntel, msr f
                            device_attach: est0 attach returned 6
                            p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
                            est1: <enhanced speedstep="" frequency="" control="">on cpu1
                            est: CPU supports Enhanced Speedstep, but is not recognized.
                            est: cpu_vendor GenuineIntel, msr f
                            device_attach: est1 attach returned 6
                            p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
                            Timecounters tick every 1.000 msec
                            IPsec: Initialized Security Association Processing.
                            usbus0: 12Mbps Full Speed USB v1.0
                            usbus1: 12Mbps Full Speed USB v1.0
                            usbus2: 480Mbps High Speed USB v2.0
                            usbus3: 12Mbps Full Speed USB v1.0
                            usbus4: 12Mbps Full Speed USB v1.0
                            usbus5: 12Mbps Full Speed USB v1.0
                            usbus6: 12Mbps Full Speed USB v1.0
                            usbus7: 480Mbps High Speed USB v2.0
                            mpt0:vol0(mpt0:0:0): Settings (ugen0.1: <intel>at usbus0
                            uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
                            ugen1.1: <intel>at usbus1
                            uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
                            ugen2.1: <intel>at usbus2
                            uhub2: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus2
                            ugen3.1: <intel>at usbus3
                            uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
                            ugen4.1: <intel>at usbus4
                            uhub4: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus4
                            ugen5.1: <intel>at usbus5
                            uhub5: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus5
                            ugen6.1: <intel>at usbus6
                            uhub6: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus6
                            ugen7.1: <intel>at usbus7
                            uhub7: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus7
                            Member-WCE Hot-Plug-Spares High-Priority-ReSync )
                            mpt0:vol0(mpt0:0:0): Using Spare Pool: 0
                            mpt0:vol0(mpt0:0:0): 2 Members:
                                  (mpt0:1:8:0): Primary Online
                                  (mpt0:1:1:0): Secondary Online
                            mpt0:vol0(mpt0:0:0): RAID-1 - Optimal
                            mpt0:vol0(mpt0:0:0): Status ( Enabled )
                            (mpt0:vol0:1): Physical (mpt0:0:1:0), Pass-thru (mpt0:1:0:0)
                            (mpt0:vol0:1): Online
                            (mpt0:vol0:0): Physical (mpt0:0:8:0), Pass-thru (mpt0:1:1:0)
                            (mpt0:vol0:0): Online
                            uhub0: 2 ports with 2 removable, self powered
                            uhub1: 2 ports with 2 removable, self powered
                            uhub3: 2 ports with 2 removable, self powered
                            uhub4: 2 ports with 2 removable, self powered
                            uhub5: 2 ports with 2 removable, self powered
                            uhub6: 2 ports with 2 removable, self powered
                            uhub2: 4 ports with 4 removable, self powered
                            uhub7: 4 ports with 4 removable, self powered
                            pass1 at mpt0 bus 1 scbus1 target 0 lun 0
                            pass1: <ata wdc="" wd2502abys-1="" 3b05="">Fixed Uninstalled SCSI-5 device
                            pass1: 300.000MB/s transfers
                            pass1: Command Queueing enabled
                            da0 at mpt0 bus 0 scbus0 target 0 lun 0
                            da0: <dell 1028="" virtual="" disk="">Fixed Direct Access SCSI-5 device
                            da0: 300.000MB/s transfers
                            da0: Command Queueing enabled
                            da0: 237824MB (487063552 512 byte sectors: 255H 63S/T 30318C)
                            acd0: DVDROM <teac dvd-rom="" dv-28sw="" r.2a="">at ata4-master UDMA100 SATA 1.5Gb/s
                            SMP: AP CPU #1 Launched!
                            Root mount waiting for: usbus2
                            ugen2.2: <vendor 0x0424="">at usbus2
                            uhub8: <vendor 2="" 9="" 0x0424="" product="" 0x2514,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus2
                            ugen0.2: <dell>at usbus0
                            ukbd0: <ep1 interrupt="">on usbus0
                            kbd2 at ukbd0
                            uhub8: 2 ports with 2 removable, self powered
                            Trying to mount root from ufs:/dev/da0s1a
                            pflog0: promiscuous mode enabled
                            bce1: link state changed to UP
                            interrupt                          total      rate
                            irq17: uhci0                          19          0
                            irq19: ehci0                          48          0
                            irq22: atapci1                        68          1
                            irq32: mpt0                        2049        35
                            cpu0: timer                      114559      1975
                            irq256: bce0                          1          0
                            irq257: bce1                        413          7
                            cpu1: timer                      106013      1827
                            Total                            223170      3847

                            3rd Test

                            Restart LiveCD with Add-in NIC installed and BIOS Settings at Default
                            Completes LiveCD boot and configuration.
                            Enter Option 99 to Install to Hard Drive
                              Configure Console - Enter to "Accept these Settings"
                              I never get the next screen.  I just see a blue screen w/ F10=Refresh Display in the upper left.
                              I can hit <ctrl><c>to get back to the menu

                            What about running the install with the add-in nic installed causes a problem with installing to the hard drive?</c></ctrl></ep1></dell></vendor></vendor></teac></dell></ata></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></cpu></enhanced></cpu></enhanced></at></keyboard></generic></system></isa></at></ata></ata></intel></ata></ata></intel></isa></pci-isa></vga-compatible></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></bcm5709c></mii></broadcom></bcm5709c></mii></broadcom></acpi></acpi></lsilogic></acpi></acpi></bcm5709c></mii></broadcom></bcm5709c></mii></broadcom></acpi></acpi></acpi></acpi></high></acpi></acpi></dell></software></version></version></dell ></lahf></syscall,nx,rdtscp,lm></sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe></ep1></dell></vendor></vendor></teac></dell></ata></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></cpu></enhanced></cpu></enhanced></at></keyboard></generic></system></isa></at></ata></ata></intel></ata></ata></intel></isa></pci-isa></vga-compatible></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></acpi></acpi></lsilogic></acpi></acpi></bcm5709c></mii></broadcom></bcm5709c></mii></broadcom></acpi></acpi></acpi></acpi></high></acpi></acpi></dell></software></version></version></dell ></lahf></syscall,nx,rdtscp,lm></sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>

                            1 Reply Last reply Reply Quote 0
                            • T
                              the.it.dude
                              last edited by

                              R510

                              2 Internal NICs = Broadcom BCM5716 (bce)
                              2 Add-in Quad Port NICs = Intel PRO/1000 v. 2.0.7 (igb)

                              1st Test

                              Both Add-in NICs removed
                              BIOS Settings at default

                              During Boot, right after prompt for:
                                (R)ecovery mode…
                                (I)nstaller...
                                (C) Continues the LiveCD bootup...

                              I see the following on screen:

                              Loading Configuration......done.
                              Network intface mismatch -- Running interface assignment option.
                              bce1: link state changed to DOWN
                              bce1: link state changed to UP

                              And then nothing...  Just a non-blinking cursor
                              The Keyboard works... if I hit <enter>, I see carriage returns on the screen, but nothing else
                              If I hit the power button on the server, I see:
                                acpi0: suspend request ignored (not ready yet)
                                acpi0: request to enter state S5 failed (err 6)

                              Subsequent attempts with the same settings worked fine

                              Could not re-create that 1st problem
                              Everything Works!

                              2nd Test

                              Added 1 Add-In Quad Port NIC to already installed pfSense
                              Assigned Interfaces
                              Everything Works!

                              R510 w/ 1 of the Quad Port NICs installed

                              $ dmesg; vmstat -i
                              Copyright © 1992-2010 The FreeBSD Project.
                              Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                              The Regents of the University of California. All rights reserved.
                              FreeBSD is a registered trademark of The FreeBSD Foundation.
                              FreeBSD 8.1-RELEASE-p2 #0: Sat Feb 26 15:29:09 EST 2011
                                  sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
                              Timecounter "i8254" frequency 1193182 Hz quality 0
                              CPU: Intel(R) Xeon(R) CPU          E5503  @ 2.00GHz (2000.08-MHz 686-class CPU)
                                Origin = "GenuineIntel"  Id = 0x106a5  Family = 6  Model = 1a  Stepping = 5
                                Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x9ce3bd <sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt>AMD Features=0x28100000 <nx,rdtscp,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant
                              real memory  = 2147483648 (2048 MB)
                              avail memory = 2069499904 (1973 MB)
                              ACPI APIC Table: <dell  pe_sc3 ="">FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
                              FreeBSD/SMP: 2 package(s) x 2 core(s)
                              cpu0 (BSP): APIC ID: 16
                              cpu1 (AP): APIC ID: 20
                              cpu2 (AP): APIC ID:  0
                              cpu3 (AP): APIC ID:  4
                              ioapic1: Changing APIC ID to 1
                              ioapic0 <version 2.0="">irqs 0-23 on motherboard
                              ioapic1 <version 2.0="">irqs 32-55 on motherboard
                              wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
                              wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
                              module_register_init: MOD_LOAD (wpi_fw, 0xc095c1e0, 0) error 1
                              ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                              ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                              module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0767240, 0) error 1
                              ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                              ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                              module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0767300, 0) error 1
                              ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                              ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                              module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc07673c0, 0) error 1
                              wlan: mac acl policy registered
                              kbd1 at kbdmux0
                              cryptosoft0: <software crypto="">on motherboard
                              padlock0: No ACE support.
                              acpi0: <dell pe_sc3="">on motherboard
                              acpi0: [ITHREAD]
                              acpi0: Power Button (fixed)
                              Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
                              acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
                              cpu0: <acpi cpu="">on acpi0
                              cpu1: <acpi cpu="">on acpi0
                              cpu2: <acpi cpu="">on acpi0
                              cpu3: <acpi cpu="">on acpi0
                              acpi_hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0
                              Timecounter "HPET" frequency 14318180 Hz quality 900
                              pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
                              pci0: <acpi pci="" bus="">on pcib0
                              pcib1: <acpi pci-pci="" bridge="">at device 1.0 on pci0
                              pci1: <acpi pci="" bus="">on pcib1
                              bce0: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xd8000000-0xd9ffffff irq 36 at device 0.0 on pci1
                              miibus0: <mii bus="">on bce0
                              brgphy0: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus0
                              brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
                              bce0: [ITHREAD]
                              bce0: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
                              bce1: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xda000000-0xdbffffff irq 48 at device 0.1 on pci1
                              miibus1: <mii bus="">on bce1
                              brgphy1: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus1
                              brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
                              bce1: [ITHREAD]
                              bce1: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
                              pcib2: <acpi pci-pci="" bridge="">at device 3.0 on pci0
                              pci2: <acpi pci="" bus="">on pcib2
                              mpt0: <lsilogic sas="" sata="" adapter="">port 0xfc00-0xfcff mem 0xdeaec000-0xdeaeffff,0xdeaf0000-0xdeafffff irq 32 at device 0.0 on pci2
                              mpt0: [ITHREAD]
                              mpt0: MPI Version=1.5.18.0
                              mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
                              mpt0: 1 Active Volume (2 Max)
                              mpt0: 2 Hidden Drive Members (14 Max)
                              pcib3: <acpi pci-pci="" bridge="">at device 7.0 on pci0
                              pci3: <acpi pci="" bus="">on pcib3
                              pcib4: <pci-pci bridge="">at device 0.0 on pci3
                              pci4: <pci bus="">on pcib4
                              pcib5: <pci-pci bridge="">at device 2.0 on pci4
                              pci5: <pci bus="">on pcib5
                              igb0: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xecc0-0xecdf mem 0xddfc0000-0xddfdffff,0xde000000-0xde3fffff,0xddfb8000-0xddfbbfff irq 47 at device 0.0 on pci5
                              igb0: Using MSIX interrupts with 5 vectors
                              igb0: [ITHREAD]
                              igb0: [ITHREAD]
                              igb0: [ITHREAD]
                              igb0: [ITHREAD]
                              igb0: [ITHREAD]
                              igb1: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xece0-0xecff mem 0xddfe0000-0xddffffff,0xde400000-0xde7fffff,0xddfbc000-0xddfbffff irq 46 at device 0.1 on pci5
                              igb1: Using MSIX interrupts with 5 vectors
                              igb1: [ITHREAD]
                              igb1: [ITHREAD]
                              igb1: [ITHREAD]
                              igb1: [ITHREAD]
                              igb1: [ITHREAD]
                              pcib6: <pci-pci bridge="">at device 4.0 on pci4
                              pci6: <pci bus="">on pcib6
                              igb2: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xdcc0-0xdcdf mem 0xdd3c0000-0xdd3dffff,0xdd400000-0xdd7fffff,0xdd3b8000-0xdd3bbfff irq 38 at device 0.0 on pci6
                              igb2: Using MSIX interrupts with 5 vectors
                              igb2: [ITHREAD]
                              igb2: [ITHREAD]
                              igb2: [ITHREAD]
                              igb2: [ITHREAD]
                              igb2: [ITHREAD]
                              igb3: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xdce0-0xdcff mem 0xdd3e0000-0xdd3fffff,0xdd800000-0xddbfffff,0xdd3bc000-0xdd3bffff irq 45 at device 0.1 on pci6
                              igb3: Using MSIX interrupts with 5 vectors
                              igb3: [ITHREAD]
                              igb3: [ITHREAD]
                              igb3: [ITHREAD]
                              igb3: [ITHREAD]
                              igb3: [ITHREAD]
                              pcib7: <acpi pci-pci="" bridge="">at device 9.0 on pci0
                              pci7: <acpi pci="" bus="">on pcib7
                              pcib8: <acpi pci-pci="" bridge="">at device 10.0 on pci0
                              pci8: <acpi pci="" bus="">on pcib8
                              pci0: <base peripheral,="" interrupt="" controller=""> at device 20.0 (no driver attached)
                              pci0: <base peripheral,="" interrupt="" controller=""> at device 20.1 (no driver attached)
                              pci0: <base peripheral,="" interrupt="" controller=""> at device 20.2 (no driver attached)
                              uhci0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">port 0xcc40-0xcc5f irq 17 at device 26.0 on pci0
                              uhci0: [ITHREAD]
                              usbus0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">on uhci0
                              uhci1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">port 0xcc60-0xcc7f irq 18 at device 26.1 on pci0
                              uhci1: [ITHREAD]
                              usbus1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">on uhci1
                              ehci0: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">mem 0xde8fe000-0xde8fe3ff irq 19 at device 26.7 on pci0
                              ehci0: [ITHREAD]
                              usbus2: EHCI version 1.0
                              usbus2: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">on ehci0
                              uhci2: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">port 0xcc80-0xcc9f irq 21 at device 29.0 on pci0
                              uhci2: [ITHREAD]
                              usbus3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">on uhci2
                              uhci3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">port 0xcca0-0xccbf irq 20 at device 29.1 on pci0
                              uhci3: [ITHREAD]
                              usbus4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">on uhci3
                              uhci4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">port 0xccc0-0xccdf irq 21 at device 29.2 on pci0
                              uhci4: [ITHREAD]
                              usbus5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">on uhci4
                              uhci5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">port 0xcce0-0xccff irq 20 at device 29.3 on pci0
                              uhci5: [ITHREAD]
                              usbus6: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">on uhci5
                              ehci1: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">mem 0xde8ff000-0xde8ff3ff irq 21 at device 29.7 on pci0
                              ehci1: [ITHREAD]
                              usbus7: EHCI version 1.0
                              usbus7: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">on ehci1
                              pcib9: <acpi pci-pci="" bridge="">at device 30.0 on pci0
                              pci9: <acpi pci="" bus="">on pcib9
                              vgapci0: <vga-compatible display="">mem 0xd7800000-0xd7ffffff,0xdc7fc000-0xdc7fffff,0xdc800000-0xdcffffff irq 19 at device 3.0 on pci9
                              isab0: <pci-isa bridge="">at device 31.0 on pci0
                              isa0: <isa bus="">on isab0
                              atapci0: <intel ich10="" sata300="" controller="">port 0xc8e0-0xc8e7,0xc8d0-0xc8d3,0xc8e8-0xc8ef,0xc8d4-0xc8d7,0xcc00-0xcc0f,0xcc10-0xcc1f irq 23 at device 31.2 on pci0
                              atapci0: [ITHREAD]
                              ata2: <ata 0="" channel="">on atapci0
                              ata2: [ITHREAD]
                              ata3: <ata 1="" channel="">on atapci0
                              ata3: [ITHREAD]
                              atapci1: <intel ich10="" sata300="" controller="">port 0xc8f0-0xc8f7,0xc8d8-0xc8db,0xc8f8-0xc8ff,0xc8dc-0xc8df,0xcc20-0xcc2f,0xcc30-0xcc3f irq 22 at device 31.5 on pci0
                              atapci1: [ITHREAD]
                              ata4: <ata 0="" channel="">on atapci1
                              ata4: [ITHREAD]
                              ata5: <ata 1="" channel="">on atapci1
                              ata5: [ITHREAD]
                              atrtc0: <at realtime="" clock="">port 0x70-0x7f irq 8 on acpi0
                              uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                              uart0: [FILTER]
                              uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
                              uart1: [FILTER]
                              pmtimer0 on isa0
                              orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xce000-0xcefff,0xec000-0xeffff pnpid ORM0000 on isa0
                              sc0: <system console="">at flags 0x100 on isa0
                              sc0: VGA <16 virtual consoles, flags=0x300>
                              vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
                              ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
                              ata0: [ITHREAD]
                              ata1 at port 0x170-0x177,0x376 irq 15 on isa0
                              ata1: [ITHREAD]
                              atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
                              atkbd0: <at keyboard="">irq 1 on atkbdc0
                              kbd0 at atkbd0
                              atkbd0: [GIANT-LOCKED]
                              atkbd0: [ITHREAD]
                              ppc0: parallel port not found.
                              est0: <enhanced speedstep="" frequency="" control="">on cpu0
                              est: CPU supports Enhanced Speedstep, but is not recognized.
                              est: cpu_vendor GenuineIntel, msr f
                              device_attach: est0 attach returned 6
                              p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
                              est1: <enhanced speedstep="" frequency="" control="">on cpu1
                              est: CPU supports Enhanced Speedstep, but is not recognized.
                              est: cpu_vendor GenuineIntel, msr f
                              device_attach: est1 attach returned 6
                              p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
                              est2: <enhanced speedstep="" frequency="" control="">on cpu2
                              est: CPU supports Enhanced Speedstep, but is not recognized.
                              est: cpu_vendor GenuineIntel, msr f
                              device_attach: est2 attach returned 6
                              p4tcc2: <cpu frequency="" thermal="" control="">on cpu2
                              est3: <enhanced speedstep="" frequency="" control="">on cpu3
                              est: CPU supports Enhanced Speedstep, but is not recognized.
                              est: cpu_vendor GenuineIntel, msr f
                              device_attach: est3 attach returned 6
                              p4tcc3: <cpu frequency="" thermal="" control="">on cpu3
                              Timecounters tick every 1.000 msec
                              IPsec: Initialized Security Association Processing.
                              usbus0: 12Mbps Full Speed USB v1.0
                              usbus1: 12Mbps Full Speed USB v1.0
                              usbus2: 480Mbps High Speed USB v2.0
                              usbus3: 12Mbps Full Speed USB v1.0
                              usbus4: 12Mbps Full Speed USB v1.0
                              usbus5: 12Mbps Full Speed USB v1.0
                              usbus6: 12Mbps Full Speed USB v1.0
                              usbus7: 480Mbps High Speed USB v2.0
                              mpt0:vol0(mpt0:0:0): Settings ( Member-WCE Hot-Plug-Spares High-Priority-ReSync )
                              mpt0:vol0(mpt0:0:0): Using Spare Pool: 0
                              mpt0:vol0(mpt0:0:0): 2 Members:
                                    (mpt0:1:9:0): Primary Online
                                    (mpt0:1:1:0): Secondary Online
                              mpt0:vol0(mpt0:0:0): RAID-1 - Optimal
                              mpt0:vol0(mpt0:0:0): Status ( Enabled )
                              (mpt0:vol0:1): Physical (mpt0:0:1:0), Pass-thru (mpt0:1:0:0)
                              (mpt0:vol0:1): Online
                              (mpt0:vol0:0): Physical (mpt0:0:9:0), Pass-thru (mpt0:1:1:0)
                              (mpt0:vol0:0): Online
                              (xpt0:mpt0:1👎-1): rescan already queued
                              ugen0.1: <intel>at usbus0
                              uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
                              ugen1.1: <intel>at usbus1
                              uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
                              ugen2.1: <intel>at usbus2
                              uhub2: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus2
                              ugen3.1: <intel>at usbus3
                              uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
                              ugen4.1: <intel>at usbus4
                              uhub4: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus4
                              ugen5.1: <intel>at usbus5
                              uhub5: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus5
                              ugen6.1: <intel>at usbus6
                              uhub6: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus6
                              ugen7.1: <intel>at usbus7
                              uhub7: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus7
                              uhub0: 2 ports with 2 removable, self powered
                              uhub1: 2 ports with 2 removable, self powered
                              uhub3: 2 ports with 2 removable, self powered
                              uhub4: 2 ports with 2 removable, self powered
                              uhub5: 2 ports with 2 removable, self powered
                              uhub6: 2 ports with 2 removable, self powered
                              uhub2: 4 ports with 4 removable, self powered
                              uhub7: 4 ports with 4 removable, self powered
                              acd0: DVDROM <teac dvd-rom="" dv-28sw="" r.2a="">at ata4-master UDMA100 SATA 1.5Gb/s
                              ses0 at mpt0 bus 0 scbus0 target 8 lun 0
                              ses0: <dp backplane="" 1.10="">Fixed Enclosure Services SCSI-5 device
                              ses0: 300.000MB/s transfers
                              ses0: SCSI-3 SES Device
                              da0 at mpt0 bus 0 scbus0 target 0 lun 0
                              da0: <dell 1028="" virtual="" disk="">Fixed Direct Access SCSI-5 device
                              da0: 300.000MB/s transfers
                              da0: Command Queueing enabled
                              da0: 237824MB (487063552 512 byte sectors: 255H 63S/T 30318C)
                              pass2 at mpt0 bus 1 scbus1 target 0 lun 0
                              pass2: <ata wdc="" wd2502abys-1="" 3b05="">Fixed Uninstalled SCSI-5 device
                              pass2: 300.000MB/s transfers
                              pass2: Command Queueing enabled
                              SMP: AP CPU #1 Launched!
                              SMP: AP CPU #3 Launched!
                              SMP: AP CPU #2 Launched!
                              Root mount waiting for: usbus2
                              ugen2.2: <vendor 0x0424="">at usbus2
                              uhub8: <vendor 2="" 9="" 0x0424="" product="" 0x2514,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus2
                              ugen0.2: <dell>at usbus0
                              ukbd0: <ep1 interrupt="">on usbus0
                              kbd2 at ukbd0
                              uhub8: 2 ports with 2 removable, self powered
                              Trying to mount root from ufs:/dev/da0s1a
                              pflog0: promiscuous mode enabled
                              bce1: link state changed to UP
                              interrupt                          total      rate
                              irq17: uhci0                          19          0
                              irq19: ehci0                        103          0
                              irq22: atapci1                        68          0
                              irq32: mpt0                        2244        13
                              cpu0: timer                      340586      1980
                              irq256: bce0                          1          0
                              irq257: bce1                        604          3
                              cpu1: timer                      331343      1926
                              cpu3: timer                      332203      1931
                              cpu2: timer                      332203      1931
                              Total                            1339374      7787

                              3rd Test

                              1 Add-In Quad Port NIC installed
                              BIOS Settings set to Default
                              Boot to LiveCD and attempt to install
                              I see this message go by during the boot for each Intel NIC:  igb#  Could not setup receive structures
                              LiveCD hangs at "Starting DHCP Service…"
                              Solid cursor at end of the line

                              This test was repeated twice with the same results

                              4th Test

                              BIOS Setting changed to Set CPU to single core
                              Everything Works!

                              R510 w 1 NIC installed & CPU = Single

                              dmesg; vmstat -i
                              Copyright © 1992-2010 The FreeBSD Project.
                              Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                              The Regents of the University of California. All rights reserved.
                              FreeBSD is a registered trademark of The FreeBSD Foundation.
                              FreeBSD 8.1-RELEASE-p2 #0: Sat Feb 26 15:29:09 EST 2011
                                  sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
                              Timecounter "i8254" frequency 1193182 Hz quality 0
                              CPU: Intel(R) Xeon(R) CPU          E5503  @ 2.00GHz (2000.08-MHz 686-class CPU)
                                Origin = "GenuineIntel"  Id = 0x106a5  Family = 6  Model = 1a  Stepping = 5
                                Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x9ce3bd <sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt>AMD Features=0x28100000 <nx,rdtscp,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant
                              real memory  = 2147483648 (2048 MB)
                              avail memory = 2069499904 (1973 MB)
                              ACPI APIC Table: <dell  pe_sc3 ="">FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
                              FreeBSD/SMP: 2 package(s) x 1 core(s)
                              cpu0 (BSP): APIC ID: 16
                              cpu1 (AP): APIC ID:  0
                              ioapic1: Changing APIC ID to 1
                              ioapic0 <version 2.0="">irqs 0-23 on motherboard
                              ioapic1 <version 2.0="">irqs 32-55 on motherboard
                              wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
                              wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
                              module_register_init: MOD_LOAD (wpi_fw, 0xc095c1e0, 0) error 1
                              ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                              ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                              module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0767240, 0) error 1
                              ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                              ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                              module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0767300, 0) error 1
                              ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                              ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                              module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc07673c0, 0) error 1
                              wlan: mac acl policy registered
                              kbd1 at kbdmux0
                              cryptosoft0: <software crypto="">on motherboard
                              padlock0: No ACE support.
                              acpi0: <dell pe_sc3="">on motherboard
                              acpi0: [ITHREAD]
                              acpi0: Power Button (fixed)
                              Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
                              acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
                              cpu0: <acpi cpu="">on acpi0
                              cpu1: <acpi cpu="">on acpi0
                              acpi_hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0
                              Timecounter "HPET" frequency 14318180 Hz quality 900
                              pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
                              pci0: <acpi pci="" bus="">on pcib0
                              pcib1: <acpi pci-pci="" bridge="">at device 1.0 on pci0
                              pci1: <acpi pci="" bus="">on pcib1
                              bce0: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xd8000000-0xd9ffffff irq 36 at device 0.0 on pci1
                              miibus0: <mii bus="">on bce0
                              brgphy0: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus0
                              brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
                              bce0: [ITHREAD]
                              bce0: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
                              bce1: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xda000000-0xdbffffff irq 48 at device 0.1 on pci1
                              miibus1: <mii bus="">on bce1
                              brgphy1: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus1
                              brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
                              bce1: [ITHREAD]
                              bce1: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
                              pcib2: <acpi pci-pci="" bridge="">at device 3.0 on pci0
                              pci2: <acpi pci="" bus="">on pcib2
                              mpt0: <lsilogic sas="" sata="" adapter="">port 0xfc00-0xfcff mem 0xdeaec000-0xdeaeffff,0xdeaf0000-0xdeafffff irq 32 at device 0.0 on pci2
                              mpt0: [ITHREAD]
                              mpt0: MPI Version=1.5.18.0
                              mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
                              mpt0: 1 Active Volume (2 Max)
                              mpt0: 2 Hidden Drive Members (14 Max)
                              pcib3: <acpi pci-pci="" bridge="">at device 7.0 on pci0
                              pci3: <acpi pci="" bus="">on pcib3
                              pcib4: <pci-pci bridge="">at device 0.0 on pci3
                              pci4: <pci bus="">on pcib4
                              pcib5: <pci-pci bridge="">at device 2.0 on pci4
                              pci5: <pci bus="">on pcib5
                              igb0: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xecc0-0xecdf mem 0xddfc0000-0xddfdffff,0xde000000-0xde3fffff,0xddfb8000-0xddfbbfff irq 47 at device 0.0 on pci5
                              igb0: Using MSIX interrupts with 3 vectors
                              igb0: [ITHREAD]
                              igb0: [ITHREAD]
                              igb0: [ITHREAD]
                              igb1: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xece0-0xecff mem 0xddfe0000-0xddffffff,0xde400000-0xde7fffff,0xddfbc000-0xddfbffff irq 46 at device 0.1 on pci5
                              igb1: Using MSIX interrupts with 3 vectors
                              igb1: [ITHREAD]
                              igb1: [ITHREAD]
                              igb1: [ITHREAD]
                              pcib6: <pci-pci bridge="">at device 4.0 on pci4
                              pci6: <pci bus="">on pcib6
                              igb2: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xdcc0-0xdcdf mem 0xdd3c0000-0xdd3dffff,0xdd400000-0xdd7fffff,0xdd3b8000-0xdd3bbfff irq 38 at device 0.0 on pci6
                              igb2: Using MSIX interrupts with 3 vectors
                              igb2: [ITHREAD]
                              igb2: [ITHREAD]
                              igb2: [ITHREAD]
                              igb3: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xdce0-0xdcff mem 0xdd3e0000-0xdd3fffff,0xdd800000-0xddbfffff,0xdd3bc000-0xdd3bffff irq 45 at device 0.1 on pci6
                              igb3: Using MSIX interrupts with 3 vectors
                              igb3: [ITHREAD]
                              igb3: [ITHREAD]
                              igb3: [ITHREAD]
                              pcib7: <acpi pci-pci="" bridge="">at device 9.0 on pci0
                              pci7: <acpi pci="" bus="">on pcib7
                              pcib8: <acpi pci-pci="" bridge="">at device 10.0 on pci0
                              pci8: <acpi pci="" bus="">on pcib8
                              pci0: <base peripheral,="" interrupt="" controller=""> at device 20.0 (no driver attached)
                              pci0: <base peripheral,="" interrupt="" controller=""> at device 20.1 (no driver attached)
                              pci0: <base peripheral,="" interrupt="" controller=""> at device 20.2 (no driver attached)
                              uhci0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">port 0xcc40-0xcc5f irq 17 at device 26.0 on pci0
                              uhci0: [ITHREAD]
                              usbus0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">on uhci0
                              uhci1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">port 0xcc60-0xcc7f irq 18 at device 26.1 on pci0
                              uhci1: [ITHREAD]
                              usbus1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">on uhci1
                              ehci0: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">mem 0xde8fe000-0xde8fe3ff irq 19 at device 26.7 on pci0
                              ehci0: [ITHREAD]
                              usbus2: EHCI version 1.0
                              usbus2: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">on ehci0
                              uhci2: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">port 0xcc80-0xcc9f irq 21 at device 29.0 on pci0
                              uhci2: [ITHREAD]
                              usbus3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">on uhci2
                              uhci3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">port 0xcca0-0xccbf irq 20 at device 29.1 on pci0
                              uhci3: [ITHREAD]
                              usbus4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">on uhci3
                              uhci4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">port 0xccc0-0xccdf irq 21 at device 29.2 on pci0
                              uhci4: [ITHREAD]
                              usbus5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">on uhci4
                              uhci5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">port 0xcce0-0xccff irq 20 at device 29.3 on pci0
                              uhci5: [ITHREAD]
                              usbus6: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">on uhci5
                              ehci1: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">mem 0xde8ff000-0xde8ff3ff irq 21 at device 29.7 on pci0
                              ehci1: [ITHREAD]
                              usbus7: EHCI version 1.0
                              usbus7: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">on ehci1
                              pcib9: <acpi pci-pci="" bridge="">at device 30.0 on pci0
                              pci9: <acpi pci="" bus="">on pcib9
                              vgapci0: <vga-compatible display="">mem 0xd7800000-0xd7ffffff,0xdc7fc000-0xdc7fffff,0xdc800000-0xdcffffff irq 19 at device 3.0 on pci9
                              isab0: <pci-isa bridge="">at device 31.0 on pci0
                              isa0: <isa bus="">on isab0
                              atapci0: <intel ich10="" sata300="" controller="">port 0xc8e0-0xc8e7,0xc8d0-0xc8d3,0xc8e8-0xc8ef,0xc8d4-0xc8d7,0xcc00-0xcc0f,0xcc10-0xcc1f irq 23 at device 31.2 on pci0
                              atapci0: [ITHREAD]
                              ata2: <ata 0="" channel="">on atapci0
                              ata2: [ITHREAD]
                              ata3: <ata 1="" channel="">on atapci0
                              ata3: [ITHREAD]
                              atapci1: <intel ich10="" sata300="" controller="">port 0xc8f0-0xc8f7,0xc8d8-0xc8db,0xc8f8-0xc8ff,0xc8dc-0xc8df,0xcc20-0xcc2f,0xcc30-0xcc3f irq 22 at device 31.5 on pci0
                              atapci1: [ITHREAD]
                              ata4: <ata 0="" channel="">on atapci1
                              ata4: [ITHREAD]
                              ata5: <ata 1="" channel="">on atapci1
                              ata5: [ITHREAD]
                              atrtc0: <at realtime="" clock="">port 0x70-0x7f irq 8 on acpi0
                              uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                              uart0: [FILTER]
                              uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
                              uart1: [FILTER]
                              pmtimer0 on isa0
                              orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xce000-0xcefff,0xec000-0xeffff pnpid ORM0000 on isa0
                              sc0: <system console="">at flags 0x100 on isa0
                              sc0: VGA <16 virtual consoles, flags=0x300>
                              vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
                              ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
                              ata0: [ITHREAD]
                              ata1 at port 0x170-0x177,0x376 irq 15 on isa0
                              ata1: [ITHREAD]
                              atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
                              atkbd0: <at keyboard="">irq 1 on atkbdc0
                              kbd0 at atkbd0
                              atkbd0: [GIANT-LOCKED]
                              atkbd0: [ITHREAD]
                              ppc0: parallel port not found.
                              est0: <enhanced speedstep="" frequency="" control="">on cpu0
                              est: CPU supports Enhanced Speedstep, but is not recognized.
                              est: cpu_vendor GenuineIntel, msr f
                              device_attach: est0 attach returned 6
                              p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
                              est1: <enhanced speedstep="" frequency="" control="">on cpu1
                              est: CPU supports Enhanced Speedstep, but is not recognized.
                              est: cpu_vendor GenuineIntel, msr f
                              device_attach: est1 attach returned 6
                              p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
                              Timecounters tick every 1.000 msec
                              IPsec: Initialized Security Association Processing.
                              usbus0: 12Mbps Full Speed USB v1.0
                              usbus1: 12Mbps Full Speed USB v1.0
                              usbus2: 480Mbps High Speed USB v2.0
                              usbus3: 12Mbps Full Speed USB v1.0
                              usbus4: 12Mbps Full Speed USB v1.0
                              usbus5: 12Mbps Full Speed USB v1.0
                              usbus6: 12Mbps Full Speed USB v1.0
                              usbus7: 480Mbps High Speed USB v2.0
                              mpt0:vol0(mpt0:0:0): Settings ( Member-WCE Hot-Plug-Spares High-Priority-ReSync )
                              mpt0:vol0(mpt0:0:0): Using Spare Pool: 0
                              mpt0:vol0(mpt0:0:0): 2 Members:
                                    (mpt0:1:9:0): Primary Online
                                    (mpt0:1:1:0): Secondary Online
                              mpt0:vol0(mpt0:0:0): RAID-1 - Optimal
                              mpt0:vol0(mpt0:0:0): Status ( Enabled )
                              (mpt0:vol0:1): Physical (mpt0:0:1:0), Pass-thru (mpt0:1:0:0)
                              (mpt0:vol0:1): Online
                              (mpt0:vol0:0): Physical (mpt0:0:9:0), Pass-thru (mpt0:1:1:0)
                              (mpt0:vol0:0): Online
                              (xpt0:mpt0:1👎-1): rescan already queued
                              ugen0.1: <intel>at usbus0
                              uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
                              ugen1.1: <intel>at usbus1
                              uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
                              ugen2.1: <intel>at usbus2
                              uhub2: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus2
                              ugen3.1: <intel>at usbus3
                              uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
                              ugen4.1: <intel>at usbus4
                              uhub4: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus4
                              ugen5.1: <intel>at usbus5
                              uhub5: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus5
                              ugen6.1: <intel>at usbus6
                              uhub6: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus6
                              ugen7.1: <intel>at usbus7
                              uhub7: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus7
                              uhub0: 2 ports with 2 removable, self powered
                              uhub1: 2 ports with 2 removable, self powered
                              uhub3: 2 ports with 2 removable, self powered
                              uhub4: 2 ports with 2 removable, self powered
                              uhub5: 2 ports with 2 removable, self powered
                              uhub6: 2 ports with 2 removable, self powered
                              uhub2: 4 ports with 4 removable, self powered
                              uhub7: 4 ports with 4 removable, self powered
                              acd0: DVDROM <teac dvd-rom="" dv-28sw="" r.2a="">at ata4-master UDMA100 SATA 1.5Gb/s
                              ses0 at mpt0 bus 0 scbus0 target 8 lun 0
                              ses0: <dp backplane="" 1.10="">Fixed Enclosure Services SCSI-5 device
                              ses0: 300.000MB/s transfers
                              ses0: SCSI-3 SES Device
                              da0 at mpt0 bus 0 scbus0 target 0 lun 0
                              da0: <dell 1028="" virtual="" disk="">Fixed Direct Access SCSI-5 device
                              da0: 300.000MB/s transfers
                              da0: Command Queueing enabled
                              da0: 237824MB (487063552 512 byte sectors: 255H 63S/T 30318C)
                              pass2 at mpt0 bus 1 scbus1 target 0 lun 0
                              pass2: <ata wdc="" wd2502abys-1="" 3b05="">Fixed Uninstalled SCSI-5 device
                              pass2: 300.000MB/s transfers
                              pass2: Command Queueing enabled
                              SMP: AP CPU #1 Launched!
                              Root mount waiting for: usbus2
                              ugen2.2: <vendor 0x0424="">at usbus2
                              uhub8: <vendor 2="" 9="" 0x0424="" product="" 0x2514,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus2
                              ugen0.2: <dell>at usbus0
                              ukbd0: <ep1 interrupt="">on usbus0
                              kbd2 at ukbd0
                              Root mount waiting for: usbus2
                              uhub8: 4 ports with 4 removable, self powered
                              Trying to mount root from ufs:/dev/da0s1a
                              pflog0: promiscuous mode enabled
                              bce1: link state changed to UP
                              igb0: link state changed to UP
                              igb1: link state changed to UP
                              igb1: link state changed to DOWN
                              igb0: link state changed to DOWN
                              igb1: link state changed to UP
                              igb0: link state changed to UP
                              interrupt                          total      rate
                              irq17: uhci0                          70          0
                              irq19: ehci0                        827          1
                              irq22: atapci1                        68          0
                              irq32: mpt0                        3087          3
                              cpu0: timer                      1603346      1991
                              irq256: bce0                          1          0
                              irq257: bce1                        492          0
                              irq258: igb0:que 0                    20          0
                              irq260: igb0:link                      2          0
                              irq261: igb1:que 0                    20          0
                              irq263: igb1:link                      2          0
                              cpu1: timer                      1590708      1976
                              Total                            3198643      3973

                              5th Test

                              Install 2nd Add-in Quad Port NIC to already installed pfSense
                              Assign Interfaces
                              Everything Works!

                              R510 With both NICs installed, CPU = Single

                              $ dmesg; vmstat -i
                              Copyright © 1992-2010 The FreeBSD Project.
                              Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                              The Regents of the University of California. All rights reserved.
                              FreeBSD is a registered trademark of The FreeBSD Foundation.
                              FreeBSD 8.1-RELEASE-p2 #0: Sat Feb 26 15:29:09 EST 2011
                                  sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
                              Timecounter "i8254" frequency 1193182 Hz quality 0
                              CPU: Intel(R) Xeon(R) CPU          E5503  @ 2.00GHz (2000.08-MHz 686-class CPU)
                                Origin = "GenuineIntel"  Id = 0x106a5  Family = 6  Model = 1a  Stepping = 5
                                Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x9ce3bd <sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt>AMD Features=0x28100000 <nx,rdtscp,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant
                              real memory  = 2147483648 (2048 MB)
                              avail memory = 2069499904 (1973 MB)
                              ACPI APIC Table: <dell  pe_sc3 ="">FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
                              FreeBSD/SMP: 2 package(s) x 1 core(s)
                              cpu0 (BSP): APIC ID: 16
                              cpu1 (AP): APIC ID:  0
                              ioapic1: Changing APIC ID to 1
                              ioapic0 <version 2.0="">irqs 0-23 on motherboard
                              ioapic1 <version 2.0="">irqs 32-55 on motherboard
                              wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
                              wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
                              module_register_init: MOD_LOAD (wpi_fw, 0xc095c1e0, 0) error 1
                              ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                              ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                              module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0767240, 0) error 1
                              ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                              ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                              module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0767300, 0) error 1
                              ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                              ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                              module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc07673c0, 0) error 1
                              wlan: mac acl policy registered
                              kbd1 at kbdmux0
                              cryptosoft0: <software crypto="">on motherboard
                              padlock0: No ACE support.
                              acpi0: <dell pe_sc3="">on motherboard
                              acpi0: [ITHREAD]
                              acpi0: Power Button (fixed)
                              Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
                              acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
                              cpu0: <acpi cpu="">on acpi0
                              cpu1: <acpi cpu="">on acpi0
                              acpi_hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0
                              Timecounter "HPET" frequency 14318180 Hz quality 900
                              pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
                              pci0: <acpi pci="" bus="">on pcib0
                              pcib1: <acpi pci-pci="" bridge="">at device 1.0 on pci0
                              pci1: <acpi pci="" bus="">on pcib1
                              bce0: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xd6000000-0xd7ffffff irq 36 at device 0.0 on pci1
                              miibus0: <mii bus="">on bce0
                              brgphy0: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus0
                              brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
                              bce0: [ITHREAD]
                              bce0: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
                              bce1: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xd8000000-0xd9ffffff irq 48 at device 0.1 on pci1
                              miibus1: <mii bus="">on bce1
                              brgphy1: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus1
                              brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
                              bce1: [ITHREAD]
                              bce1: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
                              pcib2: <acpi pci-pci="" bridge="">at device 3.0 on pci0
                              pci2: <acpi pci="" bus="">on pcib2
                              mpt0: <lsilogic sas="" sata="" adapter="">port 0xfc00-0xfcff mem 0xde2ec000-0xde2effff,0xde2f0000-0xde2fffff irq 32 at device 0.0 on pci2
                              mpt0: [ITHREAD]
                              mpt0: MPI Version=1.5.18.0
                              mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
                              mpt0: 1 Active Volume (2 Max)
                              mpt0: 2 Hidden Drive Members (14 Max)
                              pcib3: <acpi pci-pci="" bridge="">at device 7.0 on pci0
                              pci3: <acpi pci="" bus="">on pcib3
                              pcib4: <pci-pci bridge="">at device 0.0 on pci3
                              pci4: <pci bus="">on pcib4
                              pcib5: <pci-pci bridge="">at device 2.0 on pci4
                              pci5: <pci bus="">on pcib5
                              igb0: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xecc0-0xecdf mem 0xdbfc0000-0xdbfdffff,0xdc000000-0xdc3fffff,0xdbfb8000-0xdbfbbfff irq 47 at device 0.0 on pci5
                              igb0: Using MSIX interrupts with 3 vectors
                              igb0: [ITHREAD]
                              igb0: [ITHREAD]
                              igb0: [ITHREAD]
                              igb1: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xece0-0xecff mem 0xdbfe0000-0xdbffffff,0xdc400000-0xdc7fffff,0xdbfbc000-0xdbfbffff irq 46 at device 0.1 on pci5
                              igb1: Using MSIX interrupts with 3 vectors
                              igb1: [ITHREAD]
                              igb1: [ITHREAD]
                              igb1: [ITHREAD]
                              pcib6: <pci-pci bridge="">at device 4.0 on pci4
                              pci6: <pci bus="">on pcib6
                              igb2: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xdcc0-0xdcdf mem 0xdb3c0000-0xdb3dffff,0xdb400000-0xdb7fffff,0xdb3b8000-0xdb3bbfff irq 38 at device 0.0 on pci6
                              igb2: Using MSIX interrupts with 3 vectors
                              igb2: [ITHREAD]
                              igb2: [ITHREAD]
                              igb2: [ITHREAD]
                              igb3: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xdce0-0xdcff mem 0xdb3e0000-0xdb3fffff,0xdb800000-0xdbbfffff,0xdb3bc000-0xdb3bffff irq 45 at device 0.1 on pci6
                              igb3: Using MSIX interrupts with 3 vectors
                              igb3: [ITHREAD]
                              igb3: [ITHREAD]
                              igb3: [ITHREAD]
                              pcib7: <acpi pci-pci="" bridge="">at device 9.0 on pci0
                              pci7: <acpi pci="" bus="">on pcib7
                              pcib8: <pci-pci bridge="">at device 0.0 on pci7
                              pci8: <pci bus="">on pcib8
                              pcib9: <pci-pci bridge="">at device 2.0 on pci8
                              pci9: <pci bus="">on pcib9
                              igb4: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xccc0-0xccdf mem 0xdd7c0000-0xdd7dffff,0xdd800000-0xddbfffff,0xdd7b8000-0xdd7bbfff irq 55 at device 0.0 on pci9
                              igb4: Using MSIX interrupts with 3 vectors
                              igb4: [ITHREAD]
                              igb4: [ITHREAD]
                              igb4: [ITHREAD]
                              igb5: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xcce0-0xccff mem 0xdd7e0000-0xdd7fffff,0xddc00000-0xddffffff,0xdd7bc000-0xdd7bffff irq 49 at device 0.1 on pci9
                              igb5: Using MSIX interrupts with 3 vectors
                              igb5: [ITHREAD]
                              igb5: [ITHREAD]
                              igb5: [ITHREAD]
                              pcib10: <pci-pci bridge="">at device 4.0 on pci8
                              pci10: <pci bus="">on pcib10
                              igb6: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xbcc0-0xbcdf mem 0xdcbc0000-0xdcbdffff,0xdcc00000-0xdcffffff,0xdcbb8000-0xdcbbbfff irq 40 at device 0.0 on pci10
                              igb6: Using MSIX interrupts with 3 vectors
                              igb6: [ITHREAD]
                              igb6: [ITHREAD]
                              igb6: [ITHREAD]
                              igb7: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xbce0-0xbcff mem 0xdcbe0000-0xdcbfffff,0xdd000000-0xdd3fffff,0xdcbbc000-0xdcbbffff irq 50 at device 0.1 on pci10
                              igb7: Using MSIX interrupts with 3 vectors
                              igb7: [ITHREAD]
                              igb7: [ITHREAD]
                              igb7: [ITHREAD]
                              pcib11: <acpi pci-pci="" bridge="">at device 10.0 on pci0
                              pci11: <acpi pci="" bus="">on pcib11
                              pci0: <base peripheral,="" interrupt="" controller=""> at device 20.0 (no driver attached)
                              pci0: <base peripheral,="" interrupt="" controller=""> at device 20.1 (no driver attached)
                              pci0: <base peripheral,="" interrupt="" controller=""> at device 20.2 (no driver attached)
                              uhci0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">port 0xac40-0xac5f irq 17 at device 26.0 on pci0
                              uhci0: [ITHREAD]
                              usbus0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">on uhci0
                              uhci1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">port 0xac60-0xac7f irq 18 at device 26.1 on pci0
                              uhci1: [ITHREAD]
                              usbus1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">on uhci1
                              ehci0: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">mem 0xde0fe000-0xde0fe3ff irq 19 at device 26.7 on pci0
                              ehci0: [ITHREAD]
                              usbus2: EHCI version 1.0
                              usbus2: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">on ehci0
                              uhci2: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">port 0xac80-0xac9f irq 21 at device 29.0 on pci0
                              uhci2: [ITHREAD]
                              usbus3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">on uhci2
                              uhci3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">port 0xaca0-0xacbf irq 20 at device 29.1 on pci0
                              uhci3: [ITHREAD]
                              usbus4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">on uhci3
                              uhci4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">port 0xacc0-0xacdf irq 21 at device 29.2 on pci0
                              uhci4: [ITHREAD]
                              usbus5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">on uhci4
                              uhci5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">port 0xace0-0xacff irq 20 at device 29.3 on pci0
                              uhci5: [ITHREAD]
                              usbus6: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">on uhci5
                              ehci1: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">mem 0xde0ff000-0xde0ff3ff irq 21 at device 29.7 on pci0
                              ehci1: [ITHREAD]
                              usbus7: EHCI version 1.0
                              usbus7: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">on ehci1
                              pcib12: <acpi pci-pci="" bridge="">at device 30.0 on pci0
                              pci12: <acpi pci="" bus="">on pcib12
                              vgapci0: <vga-compatible display="">mem 0xd5800000-0xd5ffffff,0xda7fc000-0xda7fffff,0xda800000-0xdaffffff irq 19 at device 3.0 on pci12
                              isab0: <pci-isa bridge="">at device 31.0 on pci0
                              isa0: <isa bus="">on isab0
                              atapci0: <intel ich10="" sata300="" controller="">port 0xa8e0-0xa8e7,0xa8d0-0xa8d3,0xa8e8-0xa8ef,0xa8d4-0xa8d7,0xac00-0xac0f,0xac10-0xac1f irq 23 at device 31.2 on pci0
                              atapci0: [ITHREAD]
                              ata2: <ata 0="" channel="">on atapci0
                              ata2: [ITHREAD]
                              ata3: <ata 1="" channel="">on atapci0
                              ata3: [ITHREAD]
                              atapci1: <intel ich10="" sata300="" controller="">port 0xa8f0-0xa8f7,0xa8d8-0xa8db,0xa8f8-0xa8ff,0xa8dc-0xa8df,0xac20-0xac2f,0xac30-0xac3f irq 22 at device 31.5 on pci0
                              atapci1: [ITHREAD]
                              ata4: <ata 0="" channel="">on atapci1
                              ata4: [ITHREAD]
                              ata5: <ata 1="" channel="">on atapci1
                              ata5: [ITHREAD]
                              atrtc0: <at realtime="" clock="">port 0x70-0x7f irq 8 on acpi0
                              uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                              uart0: [FILTER]
                              uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
                              uart1: [FILTER]
                              pmtimer0 on isa0
                              orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xce000-0xcefff,0xec000-0xeffff pnpid ORM0000 on isa0
                              sc0: <system console="">at flags 0x100 on isa0
                              sc0: VGA <16 virtual consoles, flags=0x300>
                              vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
                              ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
                              ata0: [ITHREAD]
                              ata1 at port 0x170-0x177,0x376 irq 15 on isa0
                              ata1: [ITHREAD]
                              atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
                              atkbd0: <at keyboard="">irq 1 on atkbdc0
                              kbd0 at atkbd0
                              atkbd0: [GIANT-LOCKED]
                              atkbd0: [ITHREAD]
                              ppc0: parallel port not found.
                              est0: <enhanced speedstep="" frequency="" control="">on cpu0
                              est: CPU supports Enhanced Speedstep, but is not recognized.
                              est: cpu_vendor GenuineIntel, msr f
                              device_attach: est0 attach returned 6
                              p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
                              est1: <enhanced speedstep="" frequency="" control="">on cpu1
                              est: CPU supports Enhanced Speedstep, but is not recognized.
                              est: cpu_vendor GenuineIntel, msr f
                              device_attach: est1 attach returned 6
                              p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
                              Timecounters tick every 1.000 msec
                              IPsec: Initialized Security Association Processing.
                              usbus0: 12Mbps Full Speed USB v1.0
                              usbus1: 12Mbps Full Speed USB v1.0
                              usbus2: 480Mbps High Speed USB v2.0
                              usbus3: 12Mbps Full Speed USB v1.0
                              usbus4: 12Mbps Full Speed USB v1.0
                              usbus5: 12Mbps Full Speed USB v1.0
                              usbus6: 12Mbps Full Speed USB v1.0
                              usbus7: 480Mbps High Speed USB v2.0
                              mpt0:vol0(mpt0:0:0): Settings ( Member-WCE Hot-Plug-Spares High-Priority-ReSync )
                              mpt0:vol0(mpt0:0:0): Using Spare Pool: 0
                              mpt0:vol0(mpt0:0:0): 2 Members:
                                    (mpt0:1:9:0): Primary Online
                                    (mpt0:1:1:0): Secondary Online
                              mpt0:vol0(mpt0:0:0): RAID-1 - Optimal
                              mpt0:vol0(mpt0:0:0): Status ( Enabled )
                              (mpt0:vol0:1): Physical (mpt0:0:1:0), Pass-thru (mpt0:1:0:0)
                              (mpt0:vol0:1): Online
                              (mpt0:vol0:0): Physical (mpt0:0:9:0), Pass-thru (mpt0:1:1:0)
                              (mpt0:vol0:0): Online
                              (xpt0:mpt0:1👎-1): rescan already queued
                              ugen0.1: <intel>at usbus0
                              uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
                              ugen1.1: <intel>at usbus1
                              uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
                              ugen2.1: <intel>at usbus2
                              uhub2: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus2
                              ugen3.1: <intel>at usbus3
                              uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
                              ugen4.1: <intel>at usbus4
                              uhub4: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus4
                              ugen5.1: <intel>at usbus5
                              uhub5: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus5
                              ugen6.1: <intel>at usbus6
                              uhub6: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus6
                              ugen7.1: <intel>at usbus7
                              uhub7: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus7
                              uhub0: 2 ports with 2 removable, self powered
                              uhub1: 2 ports with 2 removable, self powered
                              uhub3: 2 ports with 2 removable, self powered
                              uhub4: 2 ports with 2 removable, self powered
                              uhub5: 2 ports with 2 removable, self powered
                              uhub6: 2 ports with 2 removable, self powered
                              uhub2: 4 ports with 4 removable, self powered
                              uhub7: 4 ports with 4 removable, self powered
                              acd0: DVDROM <teac dvd-rom="" dv-28sw="" r.2a="">at ata4-master UDMA100 SATA 1.5Gb/s
                              ses0 at mpt0 bus 0 scbus0 target 8 lun 0
                              ses0: <dp backplane="" 1.10="">Fixed Enclosure Services SCSI-5 device
                              ses0: 300.000MB/s transfers
                              ses0: SCSI-3 SES Device
                              da0 at mpt0 bus 0 scbus0 target 0 lun 0
                              da0: <dell 1028="" virtual="" disk="">Fixed Direct Access SCSI-5 device
                              da0: 300.000MB/s transfers
                              da0: Command Queueing enabled
                              da0: 237824MB (487063552 512 byte sectors: 255H 63S/T 30318C)
                              pass2 at mpt0 bus 1 scbus1 target 0 lun 0
                              pass2: <ata wdc="" wd2502abys-1="" 3b05="">Fixed Uninstalled SCSI-5 device
                              pass2: 300.000MB/s transfers
                              pass2: Command Queueing enabled
                              SMP: AP CPU #1 Launched!
                              Root mount waiting for: usbus2
                              ugen2.2: <vendor 0x0424="">at usbus2
                              uhub8: <vendor 2="" 9="" 0x0424="" product="" 0x2514,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus2
                              ugen0.2: <dell>at usbus0
                              ukbd0: <ep1 interrupt="">on usbus0
                              kbd2 at ukbd0
                              Root mount waiting for: usbus2
                              uhub8: 4 ports with 4 removable, self powered
                              Trying to mount root from ufs:/dev/da0s1a
                              pflog0: promiscuous mode enabled
                              bce1: link state changed to UP
                              interrupt                          total      rate
                              irq17: uhci0                          19          0
                              irq19: ehci0                        247          1
                              irq22: atapci1                        68          0
                              irq32: mpt0                        2065          9
                              cpu0: timer                      441265      1987
                              irq256: bce0                          1          0
                              irq257: bce1                        120          0
                              cpu1: timer                      431253      1942
                              Total                            875038      3941

                              6th Test

                              Reset CPU to All Cores in BIOS Settings
                              Everything Works!

                              R510 w/ both NICs installed, CPU = ALL

                              $ dmesg; vmstat -i
                              Copyright © 1992-2010 The FreeBSD Project.
                              Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                              The Regents of the University of California. All rights reserved.
                              FreeBSD is a registered trademark of The FreeBSD Foundation.
                              FreeBSD 8.1-RELEASE-p2 #0: Sat Feb 26 15:29:09 EST 2011
                                  sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
                              Timecounter "i8254" frequency 1193182 Hz quality 0
                              CPU: Intel(R) Xeon(R) CPU          E5503  @ 2.00GHz (2000.08-MHz 686-class CPU)
                                Origin = "GenuineIntel"  Id = 0x106a5  Family = 6  Model = 1a  Stepping = 5
                                Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x9ce3bd <sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt>AMD Features=0x28100000 <nx,rdtscp,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant
                              real memory  = 2147483648 (2048 MB)
                              avail memory = 2069499904 (1973 MB)
                              ACPI APIC Table: <dell  pe_sc3 ="">FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
                              FreeBSD/SMP: 2 package(s) x 2 core(s)
                              cpu0 (BSP): APIC ID: 16
                              cpu1 (AP): APIC ID: 20
                              cpu2 (AP): APIC ID:  0
                              cpu3 (AP): APIC ID:  4
                              ioapic1: Changing APIC ID to 1
                              ioapic0 <version 2.0="">irqs 0-23 on motherboard
                              ioapic1 <version 2.0="">irqs 32-55 on motherboard
                              wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
                              wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
                              module_register_init: MOD_LOAD (wpi_fw, 0xc095c1e0, 0) error 1
                              ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                              ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                              module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0767240, 0) error 1
                              ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                              ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                              module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0767300, 0) error 1
                              ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                              ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                              module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc07673c0, 0) error 1
                              wlan: mac acl policy registered
                              kbd1 at kbdmux0
                              cryptosoft0: <software crypto="">on motherboard
                              padlock0: No ACE support.
                              acpi0: <dell pe_sc3="">on motherboard
                              acpi0: [ITHREAD]
                              acpi0: Power Button (fixed)
                              Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
                              acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
                              cpu0: <acpi cpu="">on acpi0
                              cpu1: <acpi cpu="">on acpi0
                              cpu2: <acpi cpu="">on acpi0
                              cpu3: <acpi cpu="">on acpi0
                              acpi_hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0
                              Timecounter "HPET" frequency 14318180 Hz quality 900
                              pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
                              pci0: <acpi pci="" bus="">on pcib0
                              pcib1: <acpi pci-pci="" bridge="">at device 1.0 on pci0
                              pci1: <acpi pci="" bus="">on pcib1
                              bce0: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xd6000000-0xd7ffffff irq 36 at device 0.0 on pci1
                              miibus0: <mii bus="">on bce0
                              brgphy0: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus0
                              brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
                              bce0: [ITHREAD]
                              bce0: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
                              bce1: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xd8000000-0xd9ffffff irq 48 at device 0.1 on pci1
                              miibus1: <mii bus="">on bce1
                              brgphy1: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus1
                              brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
                              bce1: [ITHREAD]
                              bce1: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
                              pcib2: <acpi pci-pci="" bridge="">at device 3.0 on pci0
                              pci2: <acpi pci="" bus="">on pcib2
                              mpt0: <lsilogic sas="" sata="" adapter="">port 0xfc00-0xfcff mem 0xde2ec000-0xde2effff,0xde2f0000-0xde2fffff irq 32 at device 0.0 on pci2
                              mpt0: [ITHREAD]
                              mpt0: MPI Version=1.5.18.0
                              mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
                              mpt0: 1 Active Volume (2 Max)
                              mpt0: 2 Hidden Drive Members (14 Max)
                              pcib3: <acpi pci-pci="" bridge="">at device 7.0 on pci0
                              pci3: <acpi pci="" bus="">on pcib3
                              pcib4: <pci-pci bridge="">at device 0.0 on pci3
                              pci4: <pci bus="">on pcib4
                              pcib5: <pci-pci bridge="">at device 2.0 on pci4
                              pci5: <pci bus="">on pcib5
                              igb0: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xecc0-0xecdf mem 0xdbfc0000-0xdbfdffff,0xdc000000-0xdc3fffff,0xdbfb8000-0xdbfbbfff irq 47 at device 0.0 on pci5
                              igb0: Using MSIX interrupts with 5 vectors
                              igb0: [ITHREAD]
                              igb0: [ITHREAD]
                              igb0: [ITHREAD]
                              igb0: [ITHREAD]
                              igb0: [ITHREAD]
                              igb1: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xece0-0xecff mem 0xdbfe0000-0xdbffffff,0xdc400000-0xdc7fffff,0xdbfbc000-0xdbfbffff irq 46 at device 0.1 on pci5
                              igb1: Using MSIX interrupts with 5 vectors
                              igb1: [ITHREAD]
                              igb1: [ITHREAD]
                              igb1: [ITHREAD]
                              igb1: [ITHREAD]
                              igb1: [ITHREAD]
                              pcib6: <pci-pci bridge="">at device 4.0 on pci4
                              pci6: <pci bus="">on pcib6
                              igb2: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xdcc0-0xdcdf mem 0xdb3c0000-0xdb3dffff,0xdb400000-0xdb7fffff,0xdb3b8000-0xdb3bbfff irq 38 at device 0.0 on pci6
                              igb2: Using MSIX interrupts with 5 vectors
                              igb2: [ITHREAD]
                              igb2: [ITHREAD]
                              igb2: [ITHREAD]
                              igb2: [ITHREAD]
                              igb2: [ITHREAD]
                              igb3: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xdce0-0xdcff mem 0xdb3e0000-0xdb3fffff,0xdb800000-0xdbbfffff,0xdb3bc000-0xdb3bffff irq 45 at device 0.1 on pci6
                              igb3: Using MSIX interrupts with 5 vectors
                              igb3: [ITHREAD]
                              igb3: [ITHREAD]
                              igb3: [ITHREAD]
                              igb3: [ITHREAD]
                              igb3: [ITHREAD]
                              pcib7: <acpi pci-pci="" bridge="">at device 9.0 on pci0
                              pci7: <acpi pci="" bus="">on pcib7
                              pcib8: <pci-pci bridge="">at device 0.0 on pci7
                              pci8: <pci bus="">on pcib8
                              pcib9: <pci-pci bridge="">at device 2.0 on pci8
                              pci9: <pci bus="">on pcib9
                              igb4: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xccc0-0xccdf mem 0xdd7c0000-0xdd7dffff,0xdd800000-0xddbfffff,0xdd7b8000-0xdd7bbfff irq 55 at device 0.0 on pci9
                              igb4: Using MSIX interrupts with 5 vectors
                              igb4: [ITHREAD]
                              igb4: [ITHREAD]
                              igb4: [ITHREAD]
                              igb4: [ITHREAD]
                              igb4: [ITHREAD]
                              igb5: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xcce0-0xccff mem 0xdd7e0000-0xdd7fffff,0xddc00000-0xddffffff,0xdd7bc000-0xdd7bffff irq 49 at device 0.1 on pci9
                              igb5: Using MSIX interrupts with 5 vectors
                              igb5: [ITHREAD]
                              igb5: [ITHREAD]
                              igb5: [ITHREAD]
                              igb5: [ITHREAD]
                              igb5: [ITHREAD]
                              pcib10: <pci-pci bridge="">at device 4.0 on pci8
                              pci10: <pci bus="">on pcib10
                              igb6: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xbcc0-0xbcdf mem 0xdcbc0000-0xdcbdffff,0xdcc00000-0xdcffffff,0xdcbb8000-0xdcbbbfff irq 40 at device 0.0 on pci10
                              igb6: Using MSIX interrupts with 5 vectors
                              igb6: [ITHREAD]
                              igb6: [ITHREAD]
                              igb6: [ITHREAD]
                              igb6: [ITHREAD]
                              igb6: [ITHREAD]
                              igb7: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xbce0-0xbcff mem 0xdcbe0000-0xdcbfffff,0xdd000000-0xdd3fffff,0xdcbbc000-0xdcbbffff irq 50 at device 0.1 on pci10
                              igb7: Using MSIX interrupts with 5 vectors
                              igb7: [ITHREAD]
                              igb7: [ITHREAD]
                              igb7: [ITHREAD]
                              igb7: [ITHREAD]
                              igb7: [ITHREAD]
                              pcib11: <acpi pci-pci="" bridge="">at device 10.0 on pci0
                              pci11: <acpi pci="" bus="">on pcib11
                              pci0: <base peripheral,="" interrupt="" controller=""> at device 20.0 (no driver attached)
                              pci0: <base peripheral,="" interrupt="" controller=""> at device 20.1 (no driver attached)
                              pci0: <base peripheral,="" interrupt="" controller=""> at device 20.2 (no driver attached)
                              uhci0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">port 0xac40-0xac5f irq 17 at device 26.0 on pci0
                              uhci0: [ITHREAD]
                              usbus0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">on uhci0
                              uhci1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">port 0xac60-0xac7f irq 18 at device 26.1 on pci0
                              uhci1: [ITHREAD]
                              usbus1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">on uhci1
                              ehci0: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">mem 0xde0fe000-0xde0fe3ff irq 19 at device 26.7 on pci0
                              ehci0: [ITHREAD]
                              usbus2: EHCI version 1.0
                              usbus2: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">on ehci0
                              uhci2: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">port 0xac80-0xac9f irq 21 at device 29.0 on pci0
                              uhci2: [ITHREAD]
                              usbus3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">on uhci2
                              uhci3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">port 0xaca0-0xacbf irq 20 at device 29.1 on pci0
                              uhci3: [ITHREAD]
                              usbus4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">on uhci3
                              uhci4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">port 0xacc0-0xacdf irq 21 at device 29.2 on pci0
                              uhci4: [ITHREAD]
                              usbus5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">on uhci4
                              uhci5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">port 0xace0-0xacff irq 20 at device 29.3 on pci0
                              uhci5: [ITHREAD]
                              usbus6: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">on uhci5
                              ehci1: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">mem 0xde0ff000-0xde0ff3ff irq 21 at device 29.7 on pci0
                              ehci1: [ITHREAD]
                              usbus7: EHCI version 1.0
                              usbus7: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">on ehci1
                              pcib12: <acpi pci-pci="" bridge="">at device 30.0 on pci0
                              pci12: <acpi pci="" bus="">on pcib12
                              vgapci0: <vga-compatible display="">mem 0xd5800000-0xd5ffffff,0xda7fc000-0xda7fffff,0xda800000-0xdaffffff irq 19 at device 3.0 on pci12</vga-compatible></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></acpi></acpi></intel(r)></intel(r)></pci></pci-pci></intel(r)></intel(r)></pci></pci-pci></pci></pci-pci></acpi></acpi></intel(r)></intel(r)></pci></pci-pci></intel(r)></intel(r)></pci></pci-pci></pci></pci-pci></acpi></acpi></lsilogic></acpi></acpi></bcm5709c></mii></broadcom></bcm5709c></mii></broadcom></acpi></acpi></acpi></acpi></high></acpi></acpi></acpi></acpi></dell></software></version></version></dell ></lahf></nx,rdtscp,lm></sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe></ep1></dell></vendor></vendor></ata></dell></dp></teac></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></cpu></enhanced></cpu></enhanced></at></keyboard></generic></system></isa></at></ata></ata></intel></ata></ata></intel></isa></pci-isa></vga-compatible></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></acpi></acpi></intel(r)></intel(r)></pci></pci-pci></intel(r)></intel(r)></pci></pci-pci></pci></pci-pci></acpi></acpi></intel(r)></intel(r)></pci></pci-pci></intel(r)></intel(r)></pci></pci-pci></pci></pci-pci></acpi></acpi></lsilogic></acpi></acpi></bcm5709c></mii></broadcom></bcm5709c></mii></broadcom></acpi></acpi></acpi></acpi></high></acpi></acpi></dell></software></version></version></dell ></lahf></nx,rdtscp,lm></sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe></ep1></dell></vendor></vendor></ata></dell></dp></teac></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></cpu></enhanced></cpu></enhanced></at></keyboard></generic></system></isa></at></ata></ata></intel></ata></ata></intel></isa></pci-isa></vga-compatible></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></acpi></acpi></acpi></acpi></intel(r)></intel(r)></pci></pci-pci></intel(r)></intel(r)></pci></pci-pci></pci></pci-pci></acpi></acpi></lsilogic></acpi></acpi></bcm5709c></mii></broadcom></bcm5709c></mii></broadcom></acpi></acpi></acpi></acpi></high></acpi></acpi></dell></software></version></version></dell ></lahf></nx,rdtscp,lm></sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe></ep1></dell></vendor></vendor></ata></dell></dp></teac></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></at></keyboard></generic></system></isa></at></ata></ata></intel></ata></ata></intel></isa></pci-isa></vga-compatible></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></acpi></acpi></acpi></acpi></intel(r)></intel(r)></pci></pci-pci></intel(r)></intel(r)></pci></pci-pci></pci></pci-pci></acpi></acpi></lsilogic></acpi></acpi></bcm5709c></mii></broadcom></bcm5709c></mii></broadcom></acpi></acpi></acpi></acpi></high></acpi></acpi></acpi></acpi></dell></software></version></version></dell ></lahf></nx,rdtscp,lm></sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe></enter>

                              1 Reply Last reply Reply Quote 0
                              • T
                                the.it.dude
                                last edited by

                                So in summary…

                                It appears I can get the system up and running (without crippling the physical system) by installing 1st without any of the add-in nics installed.  However, this whole process has left me with an uneasy feeling to move forward into production with these systems.  Doesn't it stand to reason that if the install had such troubles than I may run into issues once the system is in production and under load?

                                Thanks,

                                Jeff

                                1 Reply Last reply Reply Quote 0
                                • W
                                  wallabybob
                                  last edited by

                                  I can't offer an explanation for the difficulty you have had with the initial installs.

                                  Maybe it would be worthwhile cloning the hard drive and putting the original away as a backup to help you get running again quickly if you have hard drive problems.

                                  I expect there would be lots of pfSense users who rarely do an install; they do a firmware upgrade instead. I wouldn't be at all surprised if the install process is much less exercised than the "production" software.

                                  1 Reply Last reply Reply Quote 0
                                  • T
                                    the.it.dude
                                    last edited by

                                    wallabybob,

                                    Thanks for the suggestion.  These systems both have a Hardware RAID-1 setup.  I wanted the redundancy.  Makes pulling hard drives a more difficult and expensive process.  But, maybe it is worthwhile seeing if I can disable the RAID and see what happens during the install?

                                    Jeff

                                    1 Reply Last reply Reply Quote 0
                                    • T
                                      the.it.dude
                                      last edited by

                                      Disabling the RAID made no difference.

                                      Also, I was too optimistic with my analysis.  Even though the system came up fine after installing the NIC cards, as soon as I started configuring it via the web interface, things got wacky.  After each change I would lose access to the web interface.  I could still ping the firewall and the console was still OK.  But, even restarting the webconfigurator from the console would not bring access to the web gui back.  I had to fully reboot the server.

                                      I think I'll start up a new thread that references this thread.  Since this one is getting long winded, I want to post a summary of my issues and what my options are moving forward.

                                      1 Reply Last reply Reply Quote 0
                                      • First post
                                        Last post
                                      Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.