Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Dell PowerEdge R510 keeps locking up on install

    Scheduled Pinned Locked Moved Hardware
    19 Posts 4 Posters 11.7k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • T
      the.it.dude
      last edited by

      Moving IRQs resulted in the same issue… blank blue screen when trying to install to the hard drive.

      I then tried a USB DVD Drive to run the install from.  Same exact result.

      It's starting to look like something related to the Intel Quad Port NICs  (Maybe not... Had a hang after pulling nics)

      Continuing to test...

      1 Reply Last reply Reply Quote 0
      • T
        the.it.dude
        last edited by

        I've discovered that removing 1 of the quad port nic's enables consistent configuration and installation.  (Doesn't matter which nic)  As soon as I put the 2nd quad port nic in, I have problems.  I'm now trying to figure out why having both nic's installed causes problems…

        1 Reply Last reply Reply Quote 0
        • T
          the.it.dude
          last edited by

          Now I'm ticked…

          I just ordered 2 new Dell PE servers for production firewalls:

          R410 = 1 Dual Core CPU, SAS6ir, 1 Dual Port Broadcom NIC
          R510 = 2 Dual Core CPUs, SAS6ir, 2 Quad Port Intel NICs

          Having same issues with both servers!  This has got to be a freebsd thing, right?  Tomorrow, I'm going to try to load Untangle and see what happens.  My only other thought was to install ESXi and run pfSense as a VM.  But, I'm not real thrilled about that.

          1 Reply Last reply Reply Quote 0
          • W
            wallabybob
            last edited by

            @the.it.dude:

            I've discovered that removing 1 of the quad port nic's enables consistent configuration and installation.  (Doesn't matter which nic)  As soon as I put the 2nd quad port nic in, I have problems.  I'm now trying to figure out why having both nic's installed causes problems…

            By I have problems do you mean the system locks up?

            Are the two quad port NICs indentical parts?

            Please post the output of the pfSense shell command # dmesg; vmstat -i on system with only one of the quad port NICs.

            @the.it.dude:

            Having same issues with both servers!

            What issues exactly? If you can't install on the R410 you could clone the disk from the R410 and use the clone in the R410 to get over the install problem. Does the R410 have two onboard NICs? If not, does it behave better with only one NIC in the system? Do you know if they are bce or bge NICs?

            1 Reply Last reply Reply Quote 0
            • T
              the.it.dude
              last edited by

              OK, Long Post.  But, everything should be in here now…  I'll create 2 seperate posts for the R410 & the R510:

              R410

              2 Internal NICs = Broadcom BCM5716 (bce)
              Add-in Dual Port NIC = Broadcom BCM5709 (bce)

              1st Test

              Add-in NIC removed and BIOS settings all set to default
              Everything OK!

              R410 w/o NIC installed

              $ dmesg; vmstat -i
              Copyright © 1992-2010 The FreeBSD Project.
              Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
              The Regents of the University of California. All rights reserved.
              FreeBSD is a registered trademark of The FreeBSD Foundation.
              FreeBSD 8.1-RELEASE-p2 #0: Sat Feb 26 18:05:58 EST 2011
                  root@FreeBSD_8.0_pfSense_2.0-AMD64.snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
              Timecounter "i8254" frequency 1193182 Hz quality 0
              CPU: Intel(R) Xeon(R) CPU          E5503  @ 2.00GHz (1995.01-MHz K8-class CPU)
                Origin = "GenuineIntel"  Id = 0x106a5  Family = 6  Model = 1a  Stepping = 5
                Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x9ce3bd <sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt>AMD Features=0x28100800 <syscall,nx,rdtscp,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant
              real memory  = 2147483648 (2048 MB)
              avail memory = 2037293056 (1942 MB)
              ACPI APIC Table: <dell  pe_sc3 ="">FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
              FreeBSD/SMP: 1 package(s) x 2 core(s)
              cpu0 (BSP): APIC ID: 16
              cpu1 (AP): APIC ID: 20
              ioapic1: Changing APIC ID to 1
              ioapic0 <version 2.0="">irqs 0-23 on motherboard
              ioapic1 <version 2.0="">irqs 32-55 on motherboard
              wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
              wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
              module_register_init: MOD_LOAD (wpi_fw, 0xffffffff806512b0, 0) error 1
              ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
              ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
              module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8046d080, 0) error 1
              ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
              ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
              module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8046d120, 0) error 1
              wlan: mac acl policy registered
              ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
              ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
              module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8046d1c0, 0) error 1
              kbd1 at kbdmux0
              cryptosoft0: <software crypto="">on motherboard
              padlock0: No ACE support.
              acpi0: <dell pe_sc3="">on motherboard
              acpi0: [ITHREAD]
              acpi0: Power Button (fixed)
              Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
              acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
              cpu0: <acpi cpu="">on acpi0
              cpu1: <acpi cpu="">on acpi0
              acpi_hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0
              Timecounter "HPET" frequency 14318180 Hz quality 900
              pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
              pci0: <acpi pci="" bus="">on pcib0
              pcib1: <acpi pci-pci="" bridge="">at device 1.0 on pci0
              pci1: <acpi pci="" bus="">on pcib1
              bce0: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xda000000-0xdbffffff irq 36 at device 0.0 on pci1
              miibus0: <mii bus="">on bce0
              brgphy0: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus0
              brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
              bce0: [ITHREAD]
              bce0: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
              bce1: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xdc000000-0xddffffff irq 48 at device 0.1 on pci1
              miibus1: <mii bus="">on bce1
              brgphy1: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus1
              brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
              bce1: [ITHREAD]
              bce1: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
              pcib2: <acpi pci-pci="" bridge="">at device 3.0 on pci0
              pci2: <acpi pci="" bus="">on pcib2
              mpt0: <lsilogic sas="" sata="" adapter="">port 0xfc00-0xfcff mem 0xdf2ec000-0xdf2effff,0xdf2f0000-0xdf2fffff irq 32 at device 0.0 on pci2
              mpt0: [ITHREAD]
              mpt0: MPI Version=1.5.18.0
              mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
              mpt0: 1 Active Volume (2 Max)
              mpt0: 2 Hidden Drive Members (14 Max)
              pcib3: <acpi pci-pci="" bridge="">at device 7.0 on pci0
              pci3: <acpi pci="" bus="">on pcib3
              pci0: <base peripheral,="" interrupt="" controller=""> at device 20.0 (no driver attached)
              pci0: <base peripheral,="" interrupt="" controller=""> at device 20.1 (no driver attached)
              pci0: <base peripheral,="" interrupt="" controller=""> at device 20.2 (no driver attached)
              uhci0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">port 0xec40-0xec5f irq 17 at device 26.0 on pci0
              uhci0: [ITHREAD]
              usbus0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">on uhci0
              uhci1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">port 0xec60-0xec7f irq 18 at device 26.1 on pci0
              uhci1: [ITHREAD]
              usbus1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">on uhci1
              ehci0: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">mem 0xdf0fe000-0xdf0fe3ff irq 19 at device 26.7 on pci0
              ehci0: [ITHREAD]
              usbus2: EHCI version 1.0
              usbus2: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">on ehci0
              uhci2: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">port 0xec80-0xec9f irq 21 at device 29.0 on pci0
              uhci2: [ITHREAD]
              usbus3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">on uhci2
              uhci3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">port 0xeca0-0xecbf irq 20 at device 29.1 on pci0
              uhci3: [ITHREAD]
              usbus4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">on uhci3
              uhci4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">port 0xecc0-0xecdf irq 21 at device 29.2 on pci0
              uhci4: [ITHREAD]
              usbus5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">on uhci4
              uhci5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">port 0xece0-0xecff irq 20 at device 29.3 on pci0
              uhci5: [ITHREAD]
              usbus6: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">on uhci5
              ehci1: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">mem 0xdf0ff000-0xdf0ff3ff irq 21 at device 29.7 on pci0
              ehci1: [ITHREAD]
              usbus7: EHCI version 1.0
              usbus7: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">on ehci1
              pcib4: <acpi pci-pci="" bridge="">at device 30.0 on pci0
              pci4: <acpi pci="" bus="">on pcib4
              vgapci0: <vga-compatible display="">mem 0xd9800000-0xd9ffffff,0xde7fc000-0xde7fffff,0xde800000-0xdeffffff irq 19 at device 3.0 on pci4
              isab0: <pci-isa bridge="">at device 31.0 on pci0
              isa0: <isa bus="">on isab0
              atapci0: <intel ich10="" sata300="" controller="">port 0xe8e0-0xe8e7,0xe8d0-0xe8d3,0xe8e8-0xe8ef,0xe8d4-0xe8d7,0xec00-0xec0f,0xec10-0xec1f irq 23 at device 31.2 on pci0
              atapci0: [ITHREAD]
              ata2: <ata 0="" channel="">on atapci0
              ata2: [ITHREAD]
              ata3: <ata 1="" channel="">on atapci0
              ata3: [ITHREAD]
              atapci1: <intel ich10="" sata300="" controller="">port 0xe8f0-0xe8f7,0xe8d8-0xe8db,0xe8f8-0xe8ff,0xe8dc-0xe8df,0xec20-0xec2f,0xec30-0xec3f irq 22 at device 31.5 on pci0
              atapci1: [ITHREAD]
              ata4: <ata 0="" channel="">on atapci1
              ata4: [ITHREAD]
              ata5: <ata 1="" channel="">on atapci1
              ata5: [ITHREAD]
              atrtc0: <at realtime="" clock="">port 0x70-0x7f irq 8 on acpi0
              uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
              uart0: [FILTER]
              uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
              uart1: [FILTER]
              orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xce000-0xcefff,0xec000-0xeffff on isa0
              sc0: <system console="">at flags 0x100 on isa0
              sc0: VGA <16 virtual consoles, flags=0x300>
              vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
              atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
              atkbd0: <at keyboard="">irq 1 on atkbdc0
              kbd0 at atkbd0
              atkbd0: [GIANT-LOCKED]
              atkbd0: [ITHREAD]
              ppc0: cannot reserve I/O port range
              est0: <enhanced speedstep="" frequency="" control="">on cpu0
              est: CPU supports Enhanced Speedstep, but is not recognized.
              est: cpu_vendor GenuineIntel, msr f
              device_attach: est0 attach returned 6
              p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
              est1: <enhanced speedstep="" frequency="" control="">on cpu1
              est: CPU supports Enhanced Speedstep, but is not recognized.
              est: cpu_vendor GenuineIntel, msr f
              device_attach: est1 attach returned 6
              p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
              Timecounters tick every 1.000 msec
              IPsec: Initialized Security Association Processing.
              usbus0: 12Mbps Full Speed USB v1.0
              usbus1: 12Mbps Full Speed USB v1.0
              usbus2: 480Mbps High Speed USB v2.0
              usbus3: 12Mbps Full Speed USB v1.0
              usbus4: 12Mbps Full Speed USB v1.0
              usbus5: 12Mbps Full Speed USB v1.0
              usbus6: 12Mbps Full Speed USB v1.0
              usbus7: 480Mbps High Speed USB v2.0
              mpt0:vol0(mpt0:0:0): Settings ( Member-WCE Hot-Plug-Spares High-Priority-ReSync )ugen0.1: <intel>at usbus0
              uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
              ugen1.1: <intel>at usbus1
              uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
              ugen2.1: <intel>at usbus2
              uhub2: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus2
              ugen3.1: <intel>at usbus3
              uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
              ugen4.1: <intel>at usbus4
              uhub4: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus4
              ugen5.1: <intel>at usbus5
              uhub5: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus5
              ugen6.1: <intel>at usbus6
              uhub6: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus6
              ugen7.1: <intel>at usbus7
              uhub7: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus7

              mpt0:vol0(mpt0:0:0): Using Spare Pool: 0
              mpt0:vol0(mpt0:0:0): 2 Members:
                    (mpt0:1:8:0): Primary Online
                    (mpt0:1:1:0): Secondary Online
              mpt0:vol0(mpt0:0:0): RAID-1 - Optimal
              mpt0:vol0(mpt0:0:0): Status ( Enabled )
              (mpt0:vol0:1): Physical (mpt0:0:1:0), Pass-thru (mpt0:1:0:0)
              (mpt0:vol0:1): Online
              (mpt0:vol0:0): Physical (mpt0:0:8:0), Pass-thru (mpt0:1:1:0)
              (mpt0:vol0:0): Online
              uhub0: 2 ports with 2 removable, self powered
              uhub1: 2 ports with 2 removable, self powered
              uhub3: 2 ports with 2 removable, self powered
              uhub4: 2 ports with 2 removable, self powered
              uhub5: 2 ports with 2 removable, self powered
              uhub6: 2 ports with 2 removable, self powered
              uhub2: 4 ports with 4 removable, self powered
              uhub7: 4 ports with 4 removable, self powered
              pass1 at mpt0 bus 1 scbus1 target 0 lun 0
              pass1: <ata wdc="" wd2502abys-1="" 3b05="">Fixed Uninstalled SCSI-5 device
              pass1: 300.000MB/s transfers
              pass1: Command Queueing enabled
              da0 at mpt0 bus 0 scbus0 target 0 lun 0
              da0: <dell 1028="" virtual="" disk="">Fixed Direct Access SCSI-5 device
              da0: 300.000MB/s transfers
              da0: Command Queueing enabled
              da0: 237824MB (487063552 512 byte sectors: 255H 63S/T 30318C)
              acd0: DVDROM <teac dvd-rom="" dv-28sw="" r.2a="">at ata4-master UDMA100 SATA 1.5Gb/s
              SMP: AP CPU #1 Launched!
              ugen2.2: <vendor 0x0424="">at usbus2
              uhub8: <vendor 2="" 9="" 0x0424="" product="" 0x2514,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus2
              ugen0.2: <dell>at usbus0
              ukbd0: <ep1 interrupt="">on usbus0
              kbd2 at ukbd0
              uhub8: 2 ports with 2 removable, self powered
              Trying to mount root from cd9660:/dev/iso9660/pfSense
              md0.uzip: 3159 x 65536 blocks
              pflog0: promiscuous mode enabled
              interrupt                          total      rate
              irq17: uhci0                          49          0
              irq19: ehci0                        147          0
              irq22: atapci1                      3746        14
              irq32: mpt0                          425          1
              cpu0: timer                      502014      1976
              irq256: bce0                          1          0
              irq257: bce1                        753          2
              cpu1: timer                      493465      1942
              Total                            1000600      3939

              2nd Test

              Install Add-in Dual Port NIC to already installed pfSense on hard drive
              Assign Interfaces
              Everything OK!

              R410 w/ NIC Installed

              $ dmesg; vmstat -i
              Copyright © 1992-2010 The FreeBSD Project.
              Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
              The Regents of the University of California. All rights reserved.
              FreeBSD is a registered trademark of The FreeBSD Foundation.
              FreeBSD 8.1-RELEASE-p2 #0: Sat Feb 26 18:05:58 EST 2011
                  root@FreeBSD_8.0_pfSense_2.0-AMD64.snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
              Timecounter "i8254" frequency 1193182 Hz quality 0
              CPU: Intel(R) Xeon(R) CPU          E5503  @ 2.00GHz (1995.01-MHz K8-class CPU)
                Origin = "GenuineIntel"  Id = 0x106a5  Family = 6  Model = 1a  Stepping = 5
                Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x9ce3bd <sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt>AMD Features=0x28100800 <syscall,nx,rdtscp,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant
              real memory  = 2147483648 (2048 MB)
              avail memory = 2037805056 (1943 MB)
              ACPI APIC Table: <dell  pe_sc3 ="">FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
              FreeBSD/SMP: 1 package(s) x 2 core(s)
              cpu0 (BSP): APIC ID: 16
              cpu1 (AP): APIC ID: 20
              ioapic1: Changing APIC ID to 1
              ioapic0 <version 2.0="">irqs 0-23 on motherboard
              ioapic1 <version 2.0="">irqs 32-55 on motherboard
              wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
              wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
              module_register_init: MOD_LOAD (wpi_fw, 0xffffffff806512b0, 0) error 1
              ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
              ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
              module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8046d080, 0) error 1
              ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
              ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
              module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8046d120, 0) error 1
              wlan: mac acl policy registered
              ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
              ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
              module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8046d1c0, 0) error 1
              kbd1 at kbdmux0
              cryptosoft0: <software crypto="">on motherboard
              padlock0: No ACE support.
              acpi0: <dell pe_sc3="">on motherboard
              acpi0: [ITHREAD]
              acpi0: Power Button (fixed)
              Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
              acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
              cpu0: <acpi cpu="">on acpi0
              cpu1: <acpi cpu="">on acpi0
              acpi_hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0
              Timecounter "HPET" frequency 14318180 Hz quality 900
              pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
              pci0: <acpi pci="" bus="">on pcib0
              pcib1: <acpi pci-pci="" bridge="">at device 1.0 on pci0
              pci1: <acpi pci="" bus="">on pcib1
              bce0: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xd6000000-0xd7ffffff irq 36 at device 0.0 on pci1
              miibus0: <mii bus="">on bce0
              brgphy0: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus0
              brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
              bce0: [ITHREAD]
              bce0: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
              bce1: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xd8000000-0xd9ffffff irq 48 at device 0.1 on pci1
              miibus1: <mii bus="">on bce1
              brgphy1: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus1
              brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
              bce1: [ITHREAD]
              bce1: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
              pcib2: <acpi pci-pci="" bridge="">at device 3.0 on pci0
              pci2: <acpi pci="" bus="">on pcib2
              mpt0: <lsilogic sas="" sata="" adapter="">port 0xfc00-0xfcff mem 0xdf2ec000-0xdf2effff,0xdf2f0000-0xdf2fffff irq 32 at device 0.0 on pci2
              mpt0: [ITHREAD]
              mpt0: MPI Version=1.5.18.0
              mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
              mpt0: 1 Active Volume (2 Max)
              mpt0: 2 Hidden Drive Members (14 Max)
              pcib3: <acpi pci-pci="" bridge="">at device 7.0 on pci0
              pci3: <acpi pci="" bus="">on pcib3
              bce2: <broadcom netxtreme="" ii="" bcm5709="" 1000base-t="" (c0)="">mem 0xda000000-0xdbffffff irq 38 at device 0.0 on pci3
              miibus2: <mii bus="">on bce2
              brgphy2: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus2
              brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
              bce2: [ITHREAD]
              bce2: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI)
              bce3: <broadcom netxtreme="" ii="" bcm5709="" 1000base-t="" (c0)="">mem 0xdc000000-0xddffffff irq 45 at device 0.1 on pci3
              miibus3: <mii bus="">on bce3
              brgphy3: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus3
              brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
              bce3: [ITHREAD]
              bce3: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI)
              pci0: <base peripheral,="" interrupt="" controller=""> at device 20.0 (no driver attached)
              pci0: <base peripheral,="" interrupt="" controller=""> at device 20.1 (no driver attached)
              pci0: <base peripheral,="" interrupt="" controller=""> at device 20.2 (no driver attached)
              uhci0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">port 0xec40-0xec5f irq 17 at device 26.0 on pci0
              uhci0: [ITHREAD]
              usbus0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">on uhci0
              uhci1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">port 0xec60-0xec7f irq 18 at device 26.1 on pci0
              uhci1: [ITHREAD]
              usbus1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">on uhci1
              ehci0: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">mem 0xdf0fe000-0xdf0fe3ff irq 19 at device 26.7 on pci0
              ehci0: [ITHREAD]
              usbus2: EHCI version 1.0
              usbus2: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">on ehci0
              uhci2: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">port 0xec80-0xec9f irq 21 at device 29.0 on pci0
              uhci2: [ITHREAD]
              usbus3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">on uhci2
              uhci3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">port 0xeca0-0xecbf irq 20 at device 29.1 on pci0
              uhci3: [ITHREAD]
              usbus4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">on uhci3
              uhci4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">port 0xecc0-0xecdf irq 21 at device 29.2 on pci0
              uhci4: [ITHREAD]
              usbus5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">on uhci4
              uhci5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">port 0xece0-0xecff irq 20 at device 29.3 on pci0
              uhci5: [ITHREAD]
              usbus6: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">on uhci5
              ehci1: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">mem 0xdf0ff000-0xdf0ff3ff irq 21 at device 29.7 on pci0
              ehci1: [ITHREAD]
              usbus7: EHCI version 1.0
              usbus7: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">on ehci1
              pcib4: <acpi pci-pci="" bridge="">at device 30.0 on pci0
              pci4: <acpi pci="" bus="">on pcib4
              vgapci0: <vga-compatible display="">mem 0xd5800000-0xd5ffffff,0xde7fc000-0xde7fffff,0xde800000-0xdeffffff irq 19 at device 3.0 on pci4
              isab0: <pci-isa bridge="">at device 31.0 on pci0
              isa0: <isa bus="">on isab0
              atapci0: <intel ich10="" sata300="" controller="">port 0xe8e0-0xe8e7,0xe8d0-0xe8d3,0xe8e8-0xe8ef,0xe8d4-0xe8d7,0xec00-0xec0f,0xec10-0xec1f irq 23 at device 31.2 on pci0
              atapci0: [ITHREAD]
              ata2: <ata 0="" channel="">on atapci0
              ata2: [ITHREAD]
              ata3: <ata 1="" channel="">on atapci0
              ata3: [ITHREAD]
              atapci1: <intel ich10="" sata300="" controller="">port 0xe8f0-0xe8f7,0xe8d8-0xe8db,0xe8f8-0xe8ff,0xe8dc-0xe8df,0xec20-0xec2f,0xec30-0xec3f irq 22 at device 31.5 on pci0
              atapci1: [ITHREAD]
              ata4: <ata 0="" channel="">on atapci1
              ata4: [ITHREAD]
              ata5: <ata 1="" channel="">on atapci1
              ata5: [ITHREAD]
              atrtc0: <at realtime="" clock="">port 0x70-0x7f irq 8 on acpi0
              uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
              uart0: [FILTER]
              uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
              uart1: [FILTER]
              orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xce000-0xcefff,0xec000-0xeffff on isa0
              sc0: <system console="">at flags 0x100 on isa0
              sc0: VGA <16 virtual consoles, flags=0x300>
              vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
              atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
              atkbd0: <at keyboard="">irq 1 on atkbdc0
              kbd0 at atkbd0
              atkbd0: [GIANT-LOCKED]
              atkbd0: [ITHREAD]
              ppc0: cannot reserve I/O port range
              est0: <enhanced speedstep="" frequency="" control="">on cpu0
              est: CPU supports Enhanced Speedstep, but is not recognized.
              est: cpu_vendor GenuineIntel, msr f
              device_attach: est0 attach returned 6
              p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
              est1: <enhanced speedstep="" frequency="" control="">on cpu1
              est: CPU supports Enhanced Speedstep, but is not recognized.
              est: cpu_vendor GenuineIntel, msr f
              device_attach: est1 attach returned 6
              p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
              Timecounters tick every 1.000 msec
              IPsec: Initialized Security Association Processing.
              usbus0: 12Mbps Full Speed USB v1.0
              usbus1: 12Mbps Full Speed USB v1.0
              usbus2: 480Mbps High Speed USB v2.0
              usbus3: 12Mbps Full Speed USB v1.0
              usbus4: 12Mbps Full Speed USB v1.0
              usbus5: 12Mbps Full Speed USB v1.0
              usbus6: 12Mbps Full Speed USB v1.0
              usbus7: 480Mbps High Speed USB v2.0
              mpt0:vol0(mpt0:0:0): Settings (ugen0.1: <intel>at usbus0
              uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
              ugen1.1: <intel>at usbus1
              uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
              ugen2.1: <intel>at usbus2
              uhub2: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus2
              ugen3.1: <intel>at usbus3
              uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
              ugen4.1: <intel>at usbus4
              uhub4: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus4
              ugen5.1: <intel>at usbus5
              uhub5: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus5
              ugen6.1: <intel>at usbus6
              uhub6: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus6
              ugen7.1: <intel>at usbus7
              uhub7: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus7
              Member-WCE Hot-Plug-Spares High-Priority-ReSync )
              mpt0:vol0(mpt0:0:0): Using Spare Pool: 0
              mpt0:vol0(mpt0:0:0): 2 Members:
                    (mpt0:1:8:0): Primary Online
                    (mpt0:1:1:0): Secondary Online
              mpt0:vol0(mpt0:0:0): RAID-1 - Optimal
              mpt0:vol0(mpt0:0:0): Status ( Enabled )
              (mpt0:vol0:1): Physical (mpt0:0:1:0), Pass-thru (mpt0:1:0:0)
              (mpt0:vol0:1): Online
              (mpt0:vol0:0): Physical (mpt0:0:8:0), Pass-thru (mpt0:1:1:0)
              (mpt0:vol0:0): Online
              uhub0: 2 ports with 2 removable, self powered
              uhub1: 2 ports with 2 removable, self powered
              uhub3: 2 ports with 2 removable, self powered
              uhub4: 2 ports with 2 removable, self powered
              uhub5: 2 ports with 2 removable, self powered
              uhub6: 2 ports with 2 removable, self powered
              uhub2: 4 ports with 4 removable, self powered
              uhub7: 4 ports with 4 removable, self powered
              pass1 at mpt0 bus 1 scbus1 target 0 lun 0
              pass1: <ata wdc="" wd2502abys-1="" 3b05="">Fixed Uninstalled SCSI-5 device
              pass1: 300.000MB/s transfers
              pass1: Command Queueing enabled
              da0 at mpt0 bus 0 scbus0 target 0 lun 0
              da0: <dell 1028="" virtual="" disk="">Fixed Direct Access SCSI-5 device
              da0: 300.000MB/s transfers
              da0: Command Queueing enabled
              da0: 237824MB (487063552 512 byte sectors: 255H 63S/T 30318C)
              acd0: DVDROM <teac dvd-rom="" dv-28sw="" r.2a="">at ata4-master UDMA100 SATA 1.5Gb/s
              SMP: AP CPU #1 Launched!
              Root mount waiting for: usbus2
              ugen2.2: <vendor 0x0424="">at usbus2
              uhub8: <vendor 2="" 9="" 0x0424="" product="" 0x2514,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus2
              ugen0.2: <dell>at usbus0
              ukbd0: <ep1 interrupt="">on usbus0
              kbd2 at ukbd0
              uhub8: 2 ports with 2 removable, self powered
              Trying to mount root from ufs:/dev/da0s1a
              pflog0: promiscuous mode enabled
              bce1: link state changed to UP
              interrupt                          total      rate
              irq17: uhci0                          19          0
              irq19: ehci0                          48          0
              irq22: atapci1                        68          1
              irq32: mpt0                        2049        35
              cpu0: timer                      114559      1975
              irq256: bce0                          1          0
              irq257: bce1                        413          7
              cpu1: timer                      106013      1827
              Total                            223170      3847

              3rd Test

              Restart LiveCD with Add-in NIC installed and BIOS Settings at Default
              Completes LiveCD boot and configuration.
              Enter Option 99 to Install to Hard Drive
                Configure Console - Enter to "Accept these Settings"
                I never get the next screen.  I just see a blue screen w/ F10=Refresh Display in the upper left.
                I can hit <ctrl><c>to get back to the menu

              What about running the install with the add-in nic installed causes a problem with installing to the hard drive?</c></ctrl></ep1></dell></vendor></vendor></teac></dell></ata></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></cpu></enhanced></cpu></enhanced></at></keyboard></generic></system></isa></at></ata></ata></intel></ata></ata></intel></isa></pci-isa></vga-compatible></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></bcm5709c></mii></broadcom></bcm5709c></mii></broadcom></acpi></acpi></lsilogic></acpi></acpi></bcm5709c></mii></broadcom></bcm5709c></mii></broadcom></acpi></acpi></acpi></acpi></high></acpi></acpi></dell></software></version></version></dell ></lahf></syscall,nx,rdtscp,lm></sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe></ep1></dell></vendor></vendor></teac></dell></ata></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></cpu></enhanced></cpu></enhanced></at></keyboard></generic></system></isa></at></ata></ata></intel></ata></ata></intel></isa></pci-isa></vga-compatible></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></acpi></acpi></lsilogic></acpi></acpi></bcm5709c></mii></broadcom></bcm5709c></mii></broadcom></acpi></acpi></acpi></acpi></high></acpi></acpi></dell></software></version></version></dell ></lahf></syscall,nx,rdtscp,lm></sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>

              1 Reply Last reply Reply Quote 0
              • T
                the.it.dude
                last edited by

                R510

                2 Internal NICs = Broadcom BCM5716 (bce)
                2 Add-in Quad Port NICs = Intel PRO/1000 v. 2.0.7 (igb)

                1st Test

                Both Add-in NICs removed
                BIOS Settings at default

                During Boot, right after prompt for:
                  (R)ecovery mode…
                  (I)nstaller...
                  (C) Continues the LiveCD bootup...

                I see the following on screen:

                Loading Configuration......done.
                Network intface mismatch -- Running interface assignment option.
                bce1: link state changed to DOWN
                bce1: link state changed to UP

                And then nothing...  Just a non-blinking cursor
                The Keyboard works... if I hit <enter>, I see carriage returns on the screen, but nothing else
                If I hit the power button on the server, I see:
                  acpi0: suspend request ignored (not ready yet)
                  acpi0: request to enter state S5 failed (err 6)

                Subsequent attempts with the same settings worked fine

                Could not re-create that 1st problem
                Everything Works!

                2nd Test

                Added 1 Add-In Quad Port NIC to already installed pfSense
                Assigned Interfaces
                Everything Works!

                R510 w/ 1 of the Quad Port NICs installed

                $ dmesg; vmstat -i
                Copyright © 1992-2010 The FreeBSD Project.
                Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                The Regents of the University of California. All rights reserved.
                FreeBSD is a registered trademark of The FreeBSD Foundation.
                FreeBSD 8.1-RELEASE-p2 #0: Sat Feb 26 15:29:09 EST 2011
                    sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
                Timecounter "i8254" frequency 1193182 Hz quality 0
                CPU: Intel(R) Xeon(R) CPU          E5503  @ 2.00GHz (2000.08-MHz 686-class CPU)
                  Origin = "GenuineIntel"  Id = 0x106a5  Family = 6  Model = 1a  Stepping = 5
                  Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x9ce3bd <sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt>AMD Features=0x28100000 <nx,rdtscp,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant
                real memory  = 2147483648 (2048 MB)
                avail memory = 2069499904 (1973 MB)
                ACPI APIC Table: <dell  pe_sc3 ="">FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
                FreeBSD/SMP: 2 package(s) x 2 core(s)
                cpu0 (BSP): APIC ID: 16
                cpu1 (AP): APIC ID: 20
                cpu2 (AP): APIC ID:  0
                cpu3 (AP): APIC ID:  4
                ioapic1: Changing APIC ID to 1
                ioapic0 <version 2.0="">irqs 0-23 on motherboard
                ioapic1 <version 2.0="">irqs 32-55 on motherboard
                wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
                wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
                module_register_init: MOD_LOAD (wpi_fw, 0xc095c1e0, 0) error 1
                ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0767240, 0) error 1
                ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0767300, 0) error 1
                ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc07673c0, 0) error 1
                wlan: mac acl policy registered
                kbd1 at kbdmux0
                cryptosoft0: <software crypto="">on motherboard
                padlock0: No ACE support.
                acpi0: <dell pe_sc3="">on motherboard
                acpi0: [ITHREAD]
                acpi0: Power Button (fixed)
                Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
                acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
                cpu0: <acpi cpu="">on acpi0
                cpu1: <acpi cpu="">on acpi0
                cpu2: <acpi cpu="">on acpi0
                cpu3: <acpi cpu="">on acpi0
                acpi_hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0
                Timecounter "HPET" frequency 14318180 Hz quality 900
                pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
                pci0: <acpi pci="" bus="">on pcib0
                pcib1: <acpi pci-pci="" bridge="">at device 1.0 on pci0
                pci1: <acpi pci="" bus="">on pcib1
                bce0: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xd8000000-0xd9ffffff irq 36 at device 0.0 on pci1
                miibus0: <mii bus="">on bce0
                brgphy0: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus0
                brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
                bce0: [ITHREAD]
                bce0: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
                bce1: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xda000000-0xdbffffff irq 48 at device 0.1 on pci1
                miibus1: <mii bus="">on bce1
                brgphy1: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus1
                brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
                bce1: [ITHREAD]
                bce1: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
                pcib2: <acpi pci-pci="" bridge="">at device 3.0 on pci0
                pci2: <acpi pci="" bus="">on pcib2
                mpt0: <lsilogic sas="" sata="" adapter="">port 0xfc00-0xfcff mem 0xdeaec000-0xdeaeffff,0xdeaf0000-0xdeafffff irq 32 at device 0.0 on pci2
                mpt0: [ITHREAD]
                mpt0: MPI Version=1.5.18.0
                mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
                mpt0: 1 Active Volume (2 Max)
                mpt0: 2 Hidden Drive Members (14 Max)
                pcib3: <acpi pci-pci="" bridge="">at device 7.0 on pci0
                pci3: <acpi pci="" bus="">on pcib3
                pcib4: <pci-pci bridge="">at device 0.0 on pci3
                pci4: <pci bus="">on pcib4
                pcib5: <pci-pci bridge="">at device 2.0 on pci4
                pci5: <pci bus="">on pcib5
                igb0: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xecc0-0xecdf mem 0xddfc0000-0xddfdffff,0xde000000-0xde3fffff,0xddfb8000-0xddfbbfff irq 47 at device 0.0 on pci5
                igb0: Using MSIX interrupts with 5 vectors
                igb0: [ITHREAD]
                igb0: [ITHREAD]
                igb0: [ITHREAD]
                igb0: [ITHREAD]
                igb0: [ITHREAD]
                igb1: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xece0-0xecff mem 0xddfe0000-0xddffffff,0xde400000-0xde7fffff,0xddfbc000-0xddfbffff irq 46 at device 0.1 on pci5
                igb1: Using MSIX interrupts with 5 vectors
                igb1: [ITHREAD]
                igb1: [ITHREAD]
                igb1: [ITHREAD]
                igb1: [ITHREAD]
                igb1: [ITHREAD]
                pcib6: <pci-pci bridge="">at device 4.0 on pci4
                pci6: <pci bus="">on pcib6
                igb2: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xdcc0-0xdcdf mem 0xdd3c0000-0xdd3dffff,0xdd400000-0xdd7fffff,0xdd3b8000-0xdd3bbfff irq 38 at device 0.0 on pci6
                igb2: Using MSIX interrupts with 5 vectors
                igb2: [ITHREAD]
                igb2: [ITHREAD]
                igb2: [ITHREAD]
                igb2: [ITHREAD]
                igb2: [ITHREAD]
                igb3: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xdce0-0xdcff mem 0xdd3e0000-0xdd3fffff,0xdd800000-0xddbfffff,0xdd3bc000-0xdd3bffff irq 45 at device 0.1 on pci6
                igb3: Using MSIX interrupts with 5 vectors
                igb3: [ITHREAD]
                igb3: [ITHREAD]
                igb3: [ITHREAD]
                igb3: [ITHREAD]
                igb3: [ITHREAD]
                pcib7: <acpi pci-pci="" bridge="">at device 9.0 on pci0
                pci7: <acpi pci="" bus="">on pcib7
                pcib8: <acpi pci-pci="" bridge="">at device 10.0 on pci0
                pci8: <acpi pci="" bus="">on pcib8
                pci0: <base peripheral,="" interrupt="" controller=""> at device 20.0 (no driver attached)
                pci0: <base peripheral,="" interrupt="" controller=""> at device 20.1 (no driver attached)
                pci0: <base peripheral,="" interrupt="" controller=""> at device 20.2 (no driver attached)
                uhci0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">port 0xcc40-0xcc5f irq 17 at device 26.0 on pci0
                uhci0: [ITHREAD]
                usbus0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">on uhci0
                uhci1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">port 0xcc60-0xcc7f irq 18 at device 26.1 on pci0
                uhci1: [ITHREAD]
                usbus1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">on uhci1
                ehci0: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">mem 0xde8fe000-0xde8fe3ff irq 19 at device 26.7 on pci0
                ehci0: [ITHREAD]
                usbus2: EHCI version 1.0
                usbus2: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">on ehci0
                uhci2: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">port 0xcc80-0xcc9f irq 21 at device 29.0 on pci0
                uhci2: [ITHREAD]
                usbus3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">on uhci2
                uhci3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">port 0xcca0-0xccbf irq 20 at device 29.1 on pci0
                uhci3: [ITHREAD]
                usbus4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">on uhci3
                uhci4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">port 0xccc0-0xccdf irq 21 at device 29.2 on pci0
                uhci4: [ITHREAD]
                usbus5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">on uhci4
                uhci5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">port 0xcce0-0xccff irq 20 at device 29.3 on pci0
                uhci5: [ITHREAD]
                usbus6: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">on uhci5
                ehci1: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">mem 0xde8ff000-0xde8ff3ff irq 21 at device 29.7 on pci0
                ehci1: [ITHREAD]
                usbus7: EHCI version 1.0
                usbus7: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">on ehci1
                pcib9: <acpi pci-pci="" bridge="">at device 30.0 on pci0
                pci9: <acpi pci="" bus="">on pcib9
                vgapci0: <vga-compatible display="">mem 0xd7800000-0xd7ffffff,0xdc7fc000-0xdc7fffff,0xdc800000-0xdcffffff irq 19 at device 3.0 on pci9
                isab0: <pci-isa bridge="">at device 31.0 on pci0
                isa0: <isa bus="">on isab0
                atapci0: <intel ich10="" sata300="" controller="">port 0xc8e0-0xc8e7,0xc8d0-0xc8d3,0xc8e8-0xc8ef,0xc8d4-0xc8d7,0xcc00-0xcc0f,0xcc10-0xcc1f irq 23 at device 31.2 on pci0
                atapci0: [ITHREAD]
                ata2: <ata 0="" channel="">on atapci0
                ata2: [ITHREAD]
                ata3: <ata 1="" channel="">on atapci0
                ata3: [ITHREAD]
                atapci1: <intel ich10="" sata300="" controller="">port 0xc8f0-0xc8f7,0xc8d8-0xc8db,0xc8f8-0xc8ff,0xc8dc-0xc8df,0xcc20-0xcc2f,0xcc30-0xcc3f irq 22 at device 31.5 on pci0
                atapci1: [ITHREAD]
                ata4: <ata 0="" channel="">on atapci1
                ata4: [ITHREAD]
                ata5: <ata 1="" channel="">on atapci1
                ata5: [ITHREAD]
                atrtc0: <at realtime="" clock="">port 0x70-0x7f irq 8 on acpi0
                uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                uart0: [FILTER]
                uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
                uart1: [FILTER]
                pmtimer0 on isa0
                orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xce000-0xcefff,0xec000-0xeffff pnpid ORM0000 on isa0
                sc0: <system console="">at flags 0x100 on isa0
                sc0: VGA <16 virtual consoles, flags=0x300>
                vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
                ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
                ata0: [ITHREAD]
                ata1 at port 0x170-0x177,0x376 irq 15 on isa0
                ata1: [ITHREAD]
                atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
                atkbd0: <at keyboard="">irq 1 on atkbdc0
                kbd0 at atkbd0
                atkbd0: [GIANT-LOCKED]
                atkbd0: [ITHREAD]
                ppc0: parallel port not found.
                est0: <enhanced speedstep="" frequency="" control="">on cpu0
                est: CPU supports Enhanced Speedstep, but is not recognized.
                est: cpu_vendor GenuineIntel, msr f
                device_attach: est0 attach returned 6
                p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
                est1: <enhanced speedstep="" frequency="" control="">on cpu1
                est: CPU supports Enhanced Speedstep, but is not recognized.
                est: cpu_vendor GenuineIntel, msr f
                device_attach: est1 attach returned 6
                p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
                est2: <enhanced speedstep="" frequency="" control="">on cpu2
                est: CPU supports Enhanced Speedstep, but is not recognized.
                est: cpu_vendor GenuineIntel, msr f
                device_attach: est2 attach returned 6
                p4tcc2: <cpu frequency="" thermal="" control="">on cpu2
                est3: <enhanced speedstep="" frequency="" control="">on cpu3
                est: CPU supports Enhanced Speedstep, but is not recognized.
                est: cpu_vendor GenuineIntel, msr f
                device_attach: est3 attach returned 6
                p4tcc3: <cpu frequency="" thermal="" control="">on cpu3
                Timecounters tick every 1.000 msec
                IPsec: Initialized Security Association Processing.
                usbus0: 12Mbps Full Speed USB v1.0
                usbus1: 12Mbps Full Speed USB v1.0
                usbus2: 480Mbps High Speed USB v2.0
                usbus3: 12Mbps Full Speed USB v1.0
                usbus4: 12Mbps Full Speed USB v1.0
                usbus5: 12Mbps Full Speed USB v1.0
                usbus6: 12Mbps Full Speed USB v1.0
                usbus7: 480Mbps High Speed USB v2.0
                mpt0:vol0(mpt0:0:0): Settings ( Member-WCE Hot-Plug-Spares High-Priority-ReSync )
                mpt0:vol0(mpt0:0:0): Using Spare Pool: 0
                mpt0:vol0(mpt0:0:0): 2 Members:
                      (mpt0:1:9:0): Primary Online
                      (mpt0:1:1:0): Secondary Online
                mpt0:vol0(mpt0:0:0): RAID-1 - Optimal
                mpt0:vol0(mpt0:0:0): Status ( Enabled )
                (mpt0:vol0:1): Physical (mpt0:0:1:0), Pass-thru (mpt0:1:0:0)
                (mpt0:vol0:1): Online
                (mpt0:vol0:0): Physical (mpt0:0:9:0), Pass-thru (mpt0:1:1:0)
                (mpt0:vol0:0): Online
                (xpt0:mpt0:1👎-1): rescan already queued
                ugen0.1: <intel>at usbus0
                uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
                ugen1.1: <intel>at usbus1
                uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
                ugen2.1: <intel>at usbus2
                uhub2: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus2
                ugen3.1: <intel>at usbus3
                uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
                ugen4.1: <intel>at usbus4
                uhub4: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus4
                ugen5.1: <intel>at usbus5
                uhub5: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus5
                ugen6.1: <intel>at usbus6
                uhub6: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus6
                ugen7.1: <intel>at usbus7
                uhub7: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus7
                uhub0: 2 ports with 2 removable, self powered
                uhub1: 2 ports with 2 removable, self powered
                uhub3: 2 ports with 2 removable, self powered
                uhub4: 2 ports with 2 removable, self powered
                uhub5: 2 ports with 2 removable, self powered
                uhub6: 2 ports with 2 removable, self powered
                uhub2: 4 ports with 4 removable, self powered
                uhub7: 4 ports with 4 removable, self powered
                acd0: DVDROM <teac dvd-rom="" dv-28sw="" r.2a="">at ata4-master UDMA100 SATA 1.5Gb/s
                ses0 at mpt0 bus 0 scbus0 target 8 lun 0
                ses0: <dp backplane="" 1.10="">Fixed Enclosure Services SCSI-5 device
                ses0: 300.000MB/s transfers
                ses0: SCSI-3 SES Device
                da0 at mpt0 bus 0 scbus0 target 0 lun 0
                da0: <dell 1028="" virtual="" disk="">Fixed Direct Access SCSI-5 device
                da0: 300.000MB/s transfers
                da0: Command Queueing enabled
                da0: 237824MB (487063552 512 byte sectors: 255H 63S/T 30318C)
                pass2 at mpt0 bus 1 scbus1 target 0 lun 0
                pass2: <ata wdc="" wd2502abys-1="" 3b05="">Fixed Uninstalled SCSI-5 device
                pass2: 300.000MB/s transfers
                pass2: Command Queueing enabled
                SMP: AP CPU #1 Launched!
                SMP: AP CPU #3 Launched!
                SMP: AP CPU #2 Launched!
                Root mount waiting for: usbus2
                ugen2.2: <vendor 0x0424="">at usbus2
                uhub8: <vendor 2="" 9="" 0x0424="" product="" 0x2514,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus2
                ugen0.2: <dell>at usbus0
                ukbd0: <ep1 interrupt="">on usbus0
                kbd2 at ukbd0
                uhub8: 2 ports with 2 removable, self powered
                Trying to mount root from ufs:/dev/da0s1a
                pflog0: promiscuous mode enabled
                bce1: link state changed to UP
                interrupt                          total      rate
                irq17: uhci0                          19          0
                irq19: ehci0                        103          0
                irq22: atapci1                        68          0
                irq32: mpt0                        2244        13
                cpu0: timer                      340586      1980
                irq256: bce0                          1          0
                irq257: bce1                        604          3
                cpu1: timer                      331343      1926
                cpu3: timer                      332203      1931
                cpu2: timer                      332203      1931
                Total                            1339374      7787

                3rd Test

                1 Add-In Quad Port NIC installed
                BIOS Settings set to Default
                Boot to LiveCD and attempt to install
                I see this message go by during the boot for each Intel NIC:  igb#  Could not setup receive structures
                LiveCD hangs at "Starting DHCP Service…"
                Solid cursor at end of the line

                This test was repeated twice with the same results

                4th Test

                BIOS Setting changed to Set CPU to single core
                Everything Works!

                R510 w 1 NIC installed & CPU = Single

                dmesg; vmstat -i
                Copyright © 1992-2010 The FreeBSD Project.
                Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                The Regents of the University of California. All rights reserved.
                FreeBSD is a registered trademark of The FreeBSD Foundation.
                FreeBSD 8.1-RELEASE-p2 #0: Sat Feb 26 15:29:09 EST 2011
                    sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
                Timecounter "i8254" frequency 1193182 Hz quality 0
                CPU: Intel(R) Xeon(R) CPU          E5503  @ 2.00GHz (2000.08-MHz 686-class CPU)
                  Origin = "GenuineIntel"  Id = 0x106a5  Family = 6  Model = 1a  Stepping = 5
                  Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x9ce3bd <sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt>AMD Features=0x28100000 <nx,rdtscp,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant
                real memory  = 2147483648 (2048 MB)
                avail memory = 2069499904 (1973 MB)
                ACPI APIC Table: <dell  pe_sc3 ="">FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
                FreeBSD/SMP: 2 package(s) x 1 core(s)
                cpu0 (BSP): APIC ID: 16
                cpu1 (AP): APIC ID:  0
                ioapic1: Changing APIC ID to 1
                ioapic0 <version 2.0="">irqs 0-23 on motherboard
                ioapic1 <version 2.0="">irqs 32-55 on motherboard
                wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
                wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
                module_register_init: MOD_LOAD (wpi_fw, 0xc095c1e0, 0) error 1
                ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0767240, 0) error 1
                ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0767300, 0) error 1
                ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc07673c0, 0) error 1
                wlan: mac acl policy registered
                kbd1 at kbdmux0
                cryptosoft0: <software crypto="">on motherboard
                padlock0: No ACE support.
                acpi0: <dell pe_sc3="">on motherboard
                acpi0: [ITHREAD]
                acpi0: Power Button (fixed)
                Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
                acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
                cpu0: <acpi cpu="">on acpi0
                cpu1: <acpi cpu="">on acpi0
                acpi_hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0
                Timecounter "HPET" frequency 14318180 Hz quality 900
                pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
                pci0: <acpi pci="" bus="">on pcib0
                pcib1: <acpi pci-pci="" bridge="">at device 1.0 on pci0
                pci1: <acpi pci="" bus="">on pcib1
                bce0: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xd8000000-0xd9ffffff irq 36 at device 0.0 on pci1
                miibus0: <mii bus="">on bce0
                brgphy0: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus0
                brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
                bce0: [ITHREAD]
                bce0: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
                bce1: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xda000000-0xdbffffff irq 48 at device 0.1 on pci1
                miibus1: <mii bus="">on bce1
                brgphy1: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus1
                brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
                bce1: [ITHREAD]
                bce1: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
                pcib2: <acpi pci-pci="" bridge="">at device 3.0 on pci0
                pci2: <acpi pci="" bus="">on pcib2
                mpt0: <lsilogic sas="" sata="" adapter="">port 0xfc00-0xfcff mem 0xdeaec000-0xdeaeffff,0xdeaf0000-0xdeafffff irq 32 at device 0.0 on pci2
                mpt0: [ITHREAD]
                mpt0: MPI Version=1.5.18.0
                mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
                mpt0: 1 Active Volume (2 Max)
                mpt0: 2 Hidden Drive Members (14 Max)
                pcib3: <acpi pci-pci="" bridge="">at device 7.0 on pci0
                pci3: <acpi pci="" bus="">on pcib3
                pcib4: <pci-pci bridge="">at device 0.0 on pci3
                pci4: <pci bus="">on pcib4
                pcib5: <pci-pci bridge="">at device 2.0 on pci4
                pci5: <pci bus="">on pcib5
                igb0: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xecc0-0xecdf mem 0xddfc0000-0xddfdffff,0xde000000-0xde3fffff,0xddfb8000-0xddfbbfff irq 47 at device 0.0 on pci5
                igb0: Using MSIX interrupts with 3 vectors
                igb0: [ITHREAD]
                igb0: [ITHREAD]
                igb0: [ITHREAD]
                igb1: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xece0-0xecff mem 0xddfe0000-0xddffffff,0xde400000-0xde7fffff,0xddfbc000-0xddfbffff irq 46 at device 0.1 on pci5
                igb1: Using MSIX interrupts with 3 vectors
                igb1: [ITHREAD]
                igb1: [ITHREAD]
                igb1: [ITHREAD]
                pcib6: <pci-pci bridge="">at device 4.0 on pci4
                pci6: <pci bus="">on pcib6
                igb2: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xdcc0-0xdcdf mem 0xdd3c0000-0xdd3dffff,0xdd400000-0xdd7fffff,0xdd3b8000-0xdd3bbfff irq 38 at device 0.0 on pci6
                igb2: Using MSIX interrupts with 3 vectors
                igb2: [ITHREAD]
                igb2: [ITHREAD]
                igb2: [ITHREAD]
                igb3: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xdce0-0xdcff mem 0xdd3e0000-0xdd3fffff,0xdd800000-0xddbfffff,0xdd3bc000-0xdd3bffff irq 45 at device 0.1 on pci6
                igb3: Using MSIX interrupts with 3 vectors
                igb3: [ITHREAD]
                igb3: [ITHREAD]
                igb3: [ITHREAD]
                pcib7: <acpi pci-pci="" bridge="">at device 9.0 on pci0
                pci7: <acpi pci="" bus="">on pcib7
                pcib8: <acpi pci-pci="" bridge="">at device 10.0 on pci0
                pci8: <acpi pci="" bus="">on pcib8
                pci0: <base peripheral,="" interrupt="" controller=""> at device 20.0 (no driver attached)
                pci0: <base peripheral,="" interrupt="" controller=""> at device 20.1 (no driver attached)
                pci0: <base peripheral,="" interrupt="" controller=""> at device 20.2 (no driver attached)
                uhci0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">port 0xcc40-0xcc5f irq 17 at device 26.0 on pci0
                uhci0: [ITHREAD]
                usbus0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">on uhci0
                uhci1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">port 0xcc60-0xcc7f irq 18 at device 26.1 on pci0
                uhci1: [ITHREAD]
                usbus1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">on uhci1
                ehci0: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">mem 0xde8fe000-0xde8fe3ff irq 19 at device 26.7 on pci0
                ehci0: [ITHREAD]
                usbus2: EHCI version 1.0
                usbus2: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">on ehci0
                uhci2: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">port 0xcc80-0xcc9f irq 21 at device 29.0 on pci0
                uhci2: [ITHREAD]
                usbus3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">on uhci2
                uhci3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">port 0xcca0-0xccbf irq 20 at device 29.1 on pci0
                uhci3: [ITHREAD]
                usbus4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">on uhci3
                uhci4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">port 0xccc0-0xccdf irq 21 at device 29.2 on pci0
                uhci4: [ITHREAD]
                usbus5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">on uhci4
                uhci5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">port 0xcce0-0xccff irq 20 at device 29.3 on pci0
                uhci5: [ITHREAD]
                usbus6: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">on uhci5
                ehci1: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">mem 0xde8ff000-0xde8ff3ff irq 21 at device 29.7 on pci0
                ehci1: [ITHREAD]
                usbus7: EHCI version 1.0
                usbus7: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">on ehci1
                pcib9: <acpi pci-pci="" bridge="">at device 30.0 on pci0
                pci9: <acpi pci="" bus="">on pcib9
                vgapci0: <vga-compatible display="">mem 0xd7800000-0xd7ffffff,0xdc7fc000-0xdc7fffff,0xdc800000-0xdcffffff irq 19 at device 3.0 on pci9
                isab0: <pci-isa bridge="">at device 31.0 on pci0
                isa0: <isa bus="">on isab0
                atapci0: <intel ich10="" sata300="" controller="">port 0xc8e0-0xc8e7,0xc8d0-0xc8d3,0xc8e8-0xc8ef,0xc8d4-0xc8d7,0xcc00-0xcc0f,0xcc10-0xcc1f irq 23 at device 31.2 on pci0
                atapci0: [ITHREAD]
                ata2: <ata 0="" channel="">on atapci0
                ata2: [ITHREAD]
                ata3: <ata 1="" channel="">on atapci0
                ata3: [ITHREAD]
                atapci1: <intel ich10="" sata300="" controller="">port 0xc8f0-0xc8f7,0xc8d8-0xc8db,0xc8f8-0xc8ff,0xc8dc-0xc8df,0xcc20-0xcc2f,0xcc30-0xcc3f irq 22 at device 31.5 on pci0
                atapci1: [ITHREAD]
                ata4: <ata 0="" channel="">on atapci1
                ata4: [ITHREAD]
                ata5: <ata 1="" channel="">on atapci1
                ata5: [ITHREAD]
                atrtc0: <at realtime="" clock="">port 0x70-0x7f irq 8 on acpi0
                uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                uart0: [FILTER]
                uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
                uart1: [FILTER]
                pmtimer0 on isa0
                orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xce000-0xcefff,0xec000-0xeffff pnpid ORM0000 on isa0
                sc0: <system console="">at flags 0x100 on isa0
                sc0: VGA <16 virtual consoles, flags=0x300>
                vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
                ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
                ata0: [ITHREAD]
                ata1 at port 0x170-0x177,0x376 irq 15 on isa0
                ata1: [ITHREAD]
                atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
                atkbd0: <at keyboard="">irq 1 on atkbdc0
                kbd0 at atkbd0
                atkbd0: [GIANT-LOCKED]
                atkbd0: [ITHREAD]
                ppc0: parallel port not found.
                est0: <enhanced speedstep="" frequency="" control="">on cpu0
                est: CPU supports Enhanced Speedstep, but is not recognized.
                est: cpu_vendor GenuineIntel, msr f
                device_attach: est0 attach returned 6
                p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
                est1: <enhanced speedstep="" frequency="" control="">on cpu1
                est: CPU supports Enhanced Speedstep, but is not recognized.
                est: cpu_vendor GenuineIntel, msr f
                device_attach: est1 attach returned 6
                p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
                Timecounters tick every 1.000 msec
                IPsec: Initialized Security Association Processing.
                usbus0: 12Mbps Full Speed USB v1.0
                usbus1: 12Mbps Full Speed USB v1.0
                usbus2: 480Mbps High Speed USB v2.0
                usbus3: 12Mbps Full Speed USB v1.0
                usbus4: 12Mbps Full Speed USB v1.0
                usbus5: 12Mbps Full Speed USB v1.0
                usbus6: 12Mbps Full Speed USB v1.0
                usbus7: 480Mbps High Speed USB v2.0
                mpt0:vol0(mpt0:0:0): Settings ( Member-WCE Hot-Plug-Spares High-Priority-ReSync )
                mpt0:vol0(mpt0:0:0): Using Spare Pool: 0
                mpt0:vol0(mpt0:0:0): 2 Members:
                      (mpt0:1:9:0): Primary Online
                      (mpt0:1:1:0): Secondary Online
                mpt0:vol0(mpt0:0:0): RAID-1 - Optimal
                mpt0:vol0(mpt0:0:0): Status ( Enabled )
                (mpt0:vol0:1): Physical (mpt0:0:1:0), Pass-thru (mpt0:1:0:0)
                (mpt0:vol0:1): Online
                (mpt0:vol0:0): Physical (mpt0:0:9:0), Pass-thru (mpt0:1:1:0)
                (mpt0:vol0:0): Online
                (xpt0:mpt0:1👎-1): rescan already queued
                ugen0.1: <intel>at usbus0
                uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
                ugen1.1: <intel>at usbus1
                uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
                ugen2.1: <intel>at usbus2
                uhub2: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus2
                ugen3.1: <intel>at usbus3
                uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
                ugen4.1: <intel>at usbus4
                uhub4: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus4
                ugen5.1: <intel>at usbus5
                uhub5: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus5
                ugen6.1: <intel>at usbus6
                uhub6: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus6
                ugen7.1: <intel>at usbus7
                uhub7: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus7
                uhub0: 2 ports with 2 removable, self powered
                uhub1: 2 ports with 2 removable, self powered
                uhub3: 2 ports with 2 removable, self powered
                uhub4: 2 ports with 2 removable, self powered
                uhub5: 2 ports with 2 removable, self powered
                uhub6: 2 ports with 2 removable, self powered
                uhub2: 4 ports with 4 removable, self powered
                uhub7: 4 ports with 4 removable, self powered
                acd0: DVDROM <teac dvd-rom="" dv-28sw="" r.2a="">at ata4-master UDMA100 SATA 1.5Gb/s
                ses0 at mpt0 bus 0 scbus0 target 8 lun 0
                ses0: <dp backplane="" 1.10="">Fixed Enclosure Services SCSI-5 device
                ses0: 300.000MB/s transfers
                ses0: SCSI-3 SES Device
                da0 at mpt0 bus 0 scbus0 target 0 lun 0
                da0: <dell 1028="" virtual="" disk="">Fixed Direct Access SCSI-5 device
                da0: 300.000MB/s transfers
                da0: Command Queueing enabled
                da0: 237824MB (487063552 512 byte sectors: 255H 63S/T 30318C)
                pass2 at mpt0 bus 1 scbus1 target 0 lun 0
                pass2: <ata wdc="" wd2502abys-1="" 3b05="">Fixed Uninstalled SCSI-5 device
                pass2: 300.000MB/s transfers
                pass2: Command Queueing enabled
                SMP: AP CPU #1 Launched!
                Root mount waiting for: usbus2
                ugen2.2: <vendor 0x0424="">at usbus2
                uhub8: <vendor 2="" 9="" 0x0424="" product="" 0x2514,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus2
                ugen0.2: <dell>at usbus0
                ukbd0: <ep1 interrupt="">on usbus0
                kbd2 at ukbd0
                Root mount waiting for: usbus2
                uhub8: 4 ports with 4 removable, self powered
                Trying to mount root from ufs:/dev/da0s1a
                pflog0: promiscuous mode enabled
                bce1: link state changed to UP
                igb0: link state changed to UP
                igb1: link state changed to UP
                igb1: link state changed to DOWN
                igb0: link state changed to DOWN
                igb1: link state changed to UP
                igb0: link state changed to UP
                interrupt                          total      rate
                irq17: uhci0                          70          0
                irq19: ehci0                        827          1
                irq22: atapci1                        68          0
                irq32: mpt0                        3087          3
                cpu0: timer                      1603346      1991
                irq256: bce0                          1          0
                irq257: bce1                        492          0
                irq258: igb0:que 0                    20          0
                irq260: igb0:link                      2          0
                irq261: igb1:que 0                    20          0
                irq263: igb1:link                      2          0
                cpu1: timer                      1590708      1976
                Total                            3198643      3973

                5th Test

                Install 2nd Add-in Quad Port NIC to already installed pfSense
                Assign Interfaces
                Everything Works!

                R510 With both NICs installed, CPU = Single

                $ dmesg; vmstat -i
                Copyright © 1992-2010 The FreeBSD Project.
                Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                The Regents of the University of California. All rights reserved.
                FreeBSD is a registered trademark of The FreeBSD Foundation.
                FreeBSD 8.1-RELEASE-p2 #0: Sat Feb 26 15:29:09 EST 2011
                    sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
                Timecounter "i8254" frequency 1193182 Hz quality 0
                CPU: Intel(R) Xeon(R) CPU          E5503  @ 2.00GHz (2000.08-MHz 686-class CPU)
                  Origin = "GenuineIntel"  Id = 0x106a5  Family = 6  Model = 1a  Stepping = 5
                  Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x9ce3bd <sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt>AMD Features=0x28100000 <nx,rdtscp,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant
                real memory  = 2147483648 (2048 MB)
                avail memory = 2069499904 (1973 MB)
                ACPI APIC Table: <dell  pe_sc3 ="">FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
                FreeBSD/SMP: 2 package(s) x 1 core(s)
                cpu0 (BSP): APIC ID: 16
                cpu1 (AP): APIC ID:  0
                ioapic1: Changing APIC ID to 1
                ioapic0 <version 2.0="">irqs 0-23 on motherboard
                ioapic1 <version 2.0="">irqs 32-55 on motherboard
                wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
                wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
                module_register_init: MOD_LOAD (wpi_fw, 0xc095c1e0, 0) error 1
                ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0767240, 0) error 1
                ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0767300, 0) error 1
                ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc07673c0, 0) error 1
                wlan: mac acl policy registered
                kbd1 at kbdmux0
                cryptosoft0: <software crypto="">on motherboard
                padlock0: No ACE support.
                acpi0: <dell pe_sc3="">on motherboard
                acpi0: [ITHREAD]
                acpi0: Power Button (fixed)
                Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
                acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
                cpu0: <acpi cpu="">on acpi0
                cpu1: <acpi cpu="">on acpi0
                acpi_hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0
                Timecounter "HPET" frequency 14318180 Hz quality 900
                pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
                pci0: <acpi pci="" bus="">on pcib0
                pcib1: <acpi pci-pci="" bridge="">at device 1.0 on pci0
                pci1: <acpi pci="" bus="">on pcib1
                bce0: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xd6000000-0xd7ffffff irq 36 at device 0.0 on pci1
                miibus0: <mii bus="">on bce0
                brgphy0: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus0
                brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
                bce0: [ITHREAD]
                bce0: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
                bce1: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xd8000000-0xd9ffffff irq 48 at device 0.1 on pci1
                miibus1: <mii bus="">on bce1
                brgphy1: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus1
                brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
                bce1: [ITHREAD]
                bce1: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
                pcib2: <acpi pci-pci="" bridge="">at device 3.0 on pci0
                pci2: <acpi pci="" bus="">on pcib2
                mpt0: <lsilogic sas="" sata="" adapter="">port 0xfc00-0xfcff mem 0xde2ec000-0xde2effff,0xde2f0000-0xde2fffff irq 32 at device 0.0 on pci2
                mpt0: [ITHREAD]
                mpt0: MPI Version=1.5.18.0
                mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
                mpt0: 1 Active Volume (2 Max)
                mpt0: 2 Hidden Drive Members (14 Max)
                pcib3: <acpi pci-pci="" bridge="">at device 7.0 on pci0
                pci3: <acpi pci="" bus="">on pcib3
                pcib4: <pci-pci bridge="">at device 0.0 on pci3
                pci4: <pci bus="">on pcib4
                pcib5: <pci-pci bridge="">at device 2.0 on pci4
                pci5: <pci bus="">on pcib5
                igb0: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xecc0-0xecdf mem 0xdbfc0000-0xdbfdffff,0xdc000000-0xdc3fffff,0xdbfb8000-0xdbfbbfff irq 47 at device 0.0 on pci5
                igb0: Using MSIX interrupts with 3 vectors
                igb0: [ITHREAD]
                igb0: [ITHREAD]
                igb0: [ITHREAD]
                igb1: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xece0-0xecff mem 0xdbfe0000-0xdbffffff,0xdc400000-0xdc7fffff,0xdbfbc000-0xdbfbffff irq 46 at device 0.1 on pci5
                igb1: Using MSIX interrupts with 3 vectors
                igb1: [ITHREAD]
                igb1: [ITHREAD]
                igb1: [ITHREAD]
                pcib6: <pci-pci bridge="">at device 4.0 on pci4
                pci6: <pci bus="">on pcib6
                igb2: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xdcc0-0xdcdf mem 0xdb3c0000-0xdb3dffff,0xdb400000-0xdb7fffff,0xdb3b8000-0xdb3bbfff irq 38 at device 0.0 on pci6
                igb2: Using MSIX interrupts with 3 vectors
                igb2: [ITHREAD]
                igb2: [ITHREAD]
                igb2: [ITHREAD]
                igb3: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xdce0-0xdcff mem 0xdb3e0000-0xdb3fffff,0xdb800000-0xdbbfffff,0xdb3bc000-0xdb3bffff irq 45 at device 0.1 on pci6
                igb3: Using MSIX interrupts with 3 vectors
                igb3: [ITHREAD]
                igb3: [ITHREAD]
                igb3: [ITHREAD]
                pcib7: <acpi pci-pci="" bridge="">at device 9.0 on pci0
                pci7: <acpi pci="" bus="">on pcib7
                pcib8: <pci-pci bridge="">at device 0.0 on pci7
                pci8: <pci bus="">on pcib8
                pcib9: <pci-pci bridge="">at device 2.0 on pci8
                pci9: <pci bus="">on pcib9
                igb4: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xccc0-0xccdf mem 0xdd7c0000-0xdd7dffff,0xdd800000-0xddbfffff,0xdd7b8000-0xdd7bbfff irq 55 at device 0.0 on pci9
                igb4: Using MSIX interrupts with 3 vectors
                igb4: [ITHREAD]
                igb4: [ITHREAD]
                igb4: [ITHREAD]
                igb5: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xcce0-0xccff mem 0xdd7e0000-0xdd7fffff,0xddc00000-0xddffffff,0xdd7bc000-0xdd7bffff irq 49 at device 0.1 on pci9
                igb5: Using MSIX interrupts with 3 vectors
                igb5: [ITHREAD]
                igb5: [ITHREAD]
                igb5: [ITHREAD]
                pcib10: <pci-pci bridge="">at device 4.0 on pci8
                pci10: <pci bus="">on pcib10
                igb6: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xbcc0-0xbcdf mem 0xdcbc0000-0xdcbdffff,0xdcc00000-0xdcffffff,0xdcbb8000-0xdcbbbfff irq 40 at device 0.0 on pci10
                igb6: Using MSIX interrupts with 3 vectors
                igb6: [ITHREAD]
                igb6: [ITHREAD]
                igb6: [ITHREAD]
                igb7: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xbce0-0xbcff mem 0xdcbe0000-0xdcbfffff,0xdd000000-0xdd3fffff,0xdcbbc000-0xdcbbffff irq 50 at device 0.1 on pci10
                igb7: Using MSIX interrupts with 3 vectors
                igb7: [ITHREAD]
                igb7: [ITHREAD]
                igb7: [ITHREAD]
                pcib11: <acpi pci-pci="" bridge="">at device 10.0 on pci0
                pci11: <acpi pci="" bus="">on pcib11
                pci0: <base peripheral,="" interrupt="" controller=""> at device 20.0 (no driver attached)
                pci0: <base peripheral,="" interrupt="" controller=""> at device 20.1 (no driver attached)
                pci0: <base peripheral,="" interrupt="" controller=""> at device 20.2 (no driver attached)
                uhci0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">port 0xac40-0xac5f irq 17 at device 26.0 on pci0
                uhci0: [ITHREAD]
                usbus0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">on uhci0
                uhci1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">port 0xac60-0xac7f irq 18 at device 26.1 on pci0
                uhci1: [ITHREAD]
                usbus1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">on uhci1
                ehci0: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">mem 0xde0fe000-0xde0fe3ff irq 19 at device 26.7 on pci0
                ehci0: [ITHREAD]
                usbus2: EHCI version 1.0
                usbus2: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">on ehci0
                uhci2: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">port 0xac80-0xac9f irq 21 at device 29.0 on pci0
                uhci2: [ITHREAD]
                usbus3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">on uhci2
                uhci3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">port 0xaca0-0xacbf irq 20 at device 29.1 on pci0
                uhci3: [ITHREAD]
                usbus4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">on uhci3
                uhci4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">port 0xacc0-0xacdf irq 21 at device 29.2 on pci0
                uhci4: [ITHREAD]
                usbus5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">on uhci4
                uhci5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">port 0xace0-0xacff irq 20 at device 29.3 on pci0
                uhci5: [ITHREAD]
                usbus6: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">on uhci5
                ehci1: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">mem 0xde0ff000-0xde0ff3ff irq 21 at device 29.7 on pci0
                ehci1: [ITHREAD]
                usbus7: EHCI version 1.0
                usbus7: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">on ehci1
                pcib12: <acpi pci-pci="" bridge="">at device 30.0 on pci0
                pci12: <acpi pci="" bus="">on pcib12
                vgapci0: <vga-compatible display="">mem 0xd5800000-0xd5ffffff,0xda7fc000-0xda7fffff,0xda800000-0xdaffffff irq 19 at device 3.0 on pci12
                isab0: <pci-isa bridge="">at device 31.0 on pci0
                isa0: <isa bus="">on isab0
                atapci0: <intel ich10="" sata300="" controller="">port 0xa8e0-0xa8e7,0xa8d0-0xa8d3,0xa8e8-0xa8ef,0xa8d4-0xa8d7,0xac00-0xac0f,0xac10-0xac1f irq 23 at device 31.2 on pci0
                atapci0: [ITHREAD]
                ata2: <ata 0="" channel="">on atapci0
                ata2: [ITHREAD]
                ata3: <ata 1="" channel="">on atapci0
                ata3: [ITHREAD]
                atapci1: <intel ich10="" sata300="" controller="">port 0xa8f0-0xa8f7,0xa8d8-0xa8db,0xa8f8-0xa8ff,0xa8dc-0xa8df,0xac20-0xac2f,0xac30-0xac3f irq 22 at device 31.5 on pci0
                atapci1: [ITHREAD]
                ata4: <ata 0="" channel="">on atapci1
                ata4: [ITHREAD]
                ata5: <ata 1="" channel="">on atapci1
                ata5: [ITHREAD]
                atrtc0: <at realtime="" clock="">port 0x70-0x7f irq 8 on acpi0
                uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                uart0: [FILTER]
                uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
                uart1: [FILTER]
                pmtimer0 on isa0
                orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xce000-0xcefff,0xec000-0xeffff pnpid ORM0000 on isa0
                sc0: <system console="">at flags 0x100 on isa0
                sc0: VGA <16 virtual consoles, flags=0x300>
                vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
                ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
                ata0: [ITHREAD]
                ata1 at port 0x170-0x177,0x376 irq 15 on isa0
                ata1: [ITHREAD]
                atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
                atkbd0: <at keyboard="">irq 1 on atkbdc0
                kbd0 at atkbd0
                atkbd0: [GIANT-LOCKED]
                atkbd0: [ITHREAD]
                ppc0: parallel port not found.
                est0: <enhanced speedstep="" frequency="" control="">on cpu0
                est: CPU supports Enhanced Speedstep, but is not recognized.
                est: cpu_vendor GenuineIntel, msr f
                device_attach: est0 attach returned 6
                p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
                est1: <enhanced speedstep="" frequency="" control="">on cpu1
                est: CPU supports Enhanced Speedstep, but is not recognized.
                est: cpu_vendor GenuineIntel, msr f
                device_attach: est1 attach returned 6
                p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
                Timecounters tick every 1.000 msec
                IPsec: Initialized Security Association Processing.
                usbus0: 12Mbps Full Speed USB v1.0
                usbus1: 12Mbps Full Speed USB v1.0
                usbus2: 480Mbps High Speed USB v2.0
                usbus3: 12Mbps Full Speed USB v1.0
                usbus4: 12Mbps Full Speed USB v1.0
                usbus5: 12Mbps Full Speed USB v1.0
                usbus6: 12Mbps Full Speed USB v1.0
                usbus7: 480Mbps High Speed USB v2.0
                mpt0:vol0(mpt0:0:0): Settings ( Member-WCE Hot-Plug-Spares High-Priority-ReSync )
                mpt0:vol0(mpt0:0:0): Using Spare Pool: 0
                mpt0:vol0(mpt0:0:0): 2 Members:
                      (mpt0:1:9:0): Primary Online
                      (mpt0:1:1:0): Secondary Online
                mpt0:vol0(mpt0:0:0): RAID-1 - Optimal
                mpt0:vol0(mpt0:0:0): Status ( Enabled )
                (mpt0:vol0:1): Physical (mpt0:0:1:0), Pass-thru (mpt0:1:0:0)
                (mpt0:vol0:1): Online
                (mpt0:vol0:0): Physical (mpt0:0:9:0), Pass-thru (mpt0:1:1:0)
                (mpt0:vol0:0): Online
                (xpt0:mpt0:1👎-1): rescan already queued
                ugen0.1: <intel>at usbus0
                uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
                ugen1.1: <intel>at usbus1
                uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
                ugen2.1: <intel>at usbus2
                uhub2: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus2
                ugen3.1: <intel>at usbus3
                uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
                ugen4.1: <intel>at usbus4
                uhub4: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus4
                ugen5.1: <intel>at usbus5
                uhub5: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus5
                ugen6.1: <intel>at usbus6
                uhub6: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus6
                ugen7.1: <intel>at usbus7
                uhub7: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus7
                uhub0: 2 ports with 2 removable, self powered
                uhub1: 2 ports with 2 removable, self powered
                uhub3: 2 ports with 2 removable, self powered
                uhub4: 2 ports with 2 removable, self powered
                uhub5: 2 ports with 2 removable, self powered
                uhub6: 2 ports with 2 removable, self powered
                uhub2: 4 ports with 4 removable, self powered
                uhub7: 4 ports with 4 removable, self powered
                acd0: DVDROM <teac dvd-rom="" dv-28sw="" r.2a="">at ata4-master UDMA100 SATA 1.5Gb/s
                ses0 at mpt0 bus 0 scbus0 target 8 lun 0
                ses0: <dp backplane="" 1.10="">Fixed Enclosure Services SCSI-5 device
                ses0: 300.000MB/s transfers
                ses0: SCSI-3 SES Device
                da0 at mpt0 bus 0 scbus0 target 0 lun 0
                da0: <dell 1028="" virtual="" disk="">Fixed Direct Access SCSI-5 device
                da0: 300.000MB/s transfers
                da0: Command Queueing enabled
                da0: 237824MB (487063552 512 byte sectors: 255H 63S/T 30318C)
                pass2 at mpt0 bus 1 scbus1 target 0 lun 0
                pass2: <ata wdc="" wd2502abys-1="" 3b05="">Fixed Uninstalled SCSI-5 device
                pass2: 300.000MB/s transfers
                pass2: Command Queueing enabled
                SMP: AP CPU #1 Launched!
                Root mount waiting for: usbus2
                ugen2.2: <vendor 0x0424="">at usbus2
                uhub8: <vendor 2="" 9="" 0x0424="" product="" 0x2514,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus2
                ugen0.2: <dell>at usbus0
                ukbd0: <ep1 interrupt="">on usbus0
                kbd2 at ukbd0
                Root mount waiting for: usbus2
                uhub8: 4 ports with 4 removable, self powered
                Trying to mount root from ufs:/dev/da0s1a
                pflog0: promiscuous mode enabled
                bce1: link state changed to UP
                interrupt                          total      rate
                irq17: uhci0                          19          0
                irq19: ehci0                        247          1
                irq22: atapci1                        68          0
                irq32: mpt0                        2065          9
                cpu0: timer                      441265      1987
                irq256: bce0                          1          0
                irq257: bce1                        120          0
                cpu1: timer                      431253      1942
                Total                            875038      3941

                6th Test

                Reset CPU to All Cores in BIOS Settings
                Everything Works!

                R510 w/ both NICs installed, CPU = ALL

                $ dmesg; vmstat -i
                Copyright © 1992-2010 The FreeBSD Project.
                Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                The Regents of the University of California. All rights reserved.
                FreeBSD is a registered trademark of The FreeBSD Foundation.
                FreeBSD 8.1-RELEASE-p2 #0: Sat Feb 26 15:29:09 EST 2011
                    sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
                Timecounter "i8254" frequency 1193182 Hz quality 0
                CPU: Intel(R) Xeon(R) CPU          E5503  @ 2.00GHz (2000.08-MHz 686-class CPU)
                  Origin = "GenuineIntel"  Id = 0x106a5  Family = 6  Model = 1a  Stepping = 5
                  Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x9ce3bd <sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt>AMD Features=0x28100000 <nx,rdtscp,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant
                real memory  = 2147483648 (2048 MB)
                avail memory = 2069499904 (1973 MB)
                ACPI APIC Table: <dell  pe_sc3 ="">FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
                FreeBSD/SMP: 2 package(s) x 2 core(s)
                cpu0 (BSP): APIC ID: 16
                cpu1 (AP): APIC ID: 20
                cpu2 (AP): APIC ID:  0
                cpu3 (AP): APIC ID:  4
                ioapic1: Changing APIC ID to 1
                ioapic0 <version 2.0="">irqs 0-23 on motherboard
                ioapic1 <version 2.0="">irqs 32-55 on motherboard
                wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
                wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
                module_register_init: MOD_LOAD (wpi_fw, 0xc095c1e0, 0) error 1
                ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0767240, 0) error 1
                ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0767300, 0) error 1
                ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc07673c0, 0) error 1
                wlan: mac acl policy registered
                kbd1 at kbdmux0
                cryptosoft0: <software crypto="">on motherboard
                padlock0: No ACE support.
                acpi0: <dell pe_sc3="">on motherboard
                acpi0: [ITHREAD]
                acpi0: Power Button (fixed)
                Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
                acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
                cpu0: <acpi cpu="">on acpi0
                cpu1: <acpi cpu="">on acpi0
                cpu2: <acpi cpu="">on acpi0
                cpu3: <acpi cpu="">on acpi0
                acpi_hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0
                Timecounter "HPET" frequency 14318180 Hz quality 900
                pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
                pci0: <acpi pci="" bus="">on pcib0
                pcib1: <acpi pci-pci="" bridge="">at device 1.0 on pci0
                pci1: <acpi pci="" bus="">on pcib1
                bce0: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xd6000000-0xd7ffffff irq 36 at device 0.0 on pci1
                miibus0: <mii bus="">on bce0
                brgphy0: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus0
                brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
                bce0: [ITHREAD]
                bce0: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
                bce1: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xd8000000-0xd9ffffff irq 48 at device 0.1 on pci1
                miibus1: <mii bus="">on bce1
                brgphy1: <bcm5709c 10="" 100="" 1000basetx="" phy="">PHY 1 on miibus1
                brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
                bce1: [ITHREAD]
                bce1: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)
                pcib2: <acpi pci-pci="" bridge="">at device 3.0 on pci0
                pci2: <acpi pci="" bus="">on pcib2
                mpt0: <lsilogic sas="" sata="" adapter="">port 0xfc00-0xfcff mem 0xde2ec000-0xde2effff,0xde2f0000-0xde2fffff irq 32 at device 0.0 on pci2
                mpt0: [ITHREAD]
                mpt0: MPI Version=1.5.18.0
                mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
                mpt0: 1 Active Volume (2 Max)
                mpt0: 2 Hidden Drive Members (14 Max)
                pcib3: <acpi pci-pci="" bridge="">at device 7.0 on pci0
                pci3: <acpi pci="" bus="">on pcib3
                pcib4: <pci-pci bridge="">at device 0.0 on pci3
                pci4: <pci bus="">on pcib4
                pcib5: <pci-pci bridge="">at device 2.0 on pci4
                pci5: <pci bus="">on pcib5
                igb0: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xecc0-0xecdf mem 0xdbfc0000-0xdbfdffff,0xdc000000-0xdc3fffff,0xdbfb8000-0xdbfbbfff irq 47 at device 0.0 on pci5
                igb0: Using MSIX interrupts with 5 vectors
                igb0: [ITHREAD]
                igb0: [ITHREAD]
                igb0: [ITHREAD]
                igb0: [ITHREAD]
                igb0: [ITHREAD]
                igb1: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xece0-0xecff mem 0xdbfe0000-0xdbffffff,0xdc400000-0xdc7fffff,0xdbfbc000-0xdbfbffff irq 46 at device 0.1 on pci5
                igb1: Using MSIX interrupts with 5 vectors
                igb1: [ITHREAD]
                igb1: [ITHREAD]
                igb1: [ITHREAD]
                igb1: [ITHREAD]
                igb1: [ITHREAD]
                pcib6: <pci-pci bridge="">at device 4.0 on pci4
                pci6: <pci bus="">on pcib6
                igb2: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xdcc0-0xdcdf mem 0xdb3c0000-0xdb3dffff,0xdb400000-0xdb7fffff,0xdb3b8000-0xdb3bbfff irq 38 at device 0.0 on pci6
                igb2: Using MSIX interrupts with 5 vectors
                igb2: [ITHREAD]
                igb2: [ITHREAD]
                igb2: [ITHREAD]
                igb2: [ITHREAD]
                igb2: [ITHREAD]
                igb3: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xdce0-0xdcff mem 0xdb3e0000-0xdb3fffff,0xdb800000-0xdbbfffff,0xdb3bc000-0xdb3bffff irq 45 at device 0.1 on pci6
                igb3: Using MSIX interrupts with 5 vectors
                igb3: [ITHREAD]
                igb3: [ITHREAD]
                igb3: [ITHREAD]
                igb3: [ITHREAD]
                igb3: [ITHREAD]
                pcib7: <acpi pci-pci="" bridge="">at device 9.0 on pci0
                pci7: <acpi pci="" bus="">on pcib7
                pcib8: <pci-pci bridge="">at device 0.0 on pci7
                pci8: <pci bus="">on pcib8
                pcib9: <pci-pci bridge="">at device 2.0 on pci8
                pci9: <pci bus="">on pcib9
                igb4: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xccc0-0xccdf mem 0xdd7c0000-0xdd7dffff,0xdd800000-0xddbfffff,0xdd7b8000-0xdd7bbfff irq 55 at device 0.0 on pci9
                igb4: Using MSIX interrupts with 5 vectors
                igb4: [ITHREAD]
                igb4: [ITHREAD]
                igb4: [ITHREAD]
                igb4: [ITHREAD]
                igb4: [ITHREAD]
                igb5: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xcce0-0xccff mem 0xdd7e0000-0xdd7fffff,0xddc00000-0xddffffff,0xdd7bc000-0xdd7bffff irq 49 at device 0.1 on pci9
                igb5: Using MSIX interrupts with 5 vectors
                igb5: [ITHREAD]
                igb5: [ITHREAD]
                igb5: [ITHREAD]
                igb5: [ITHREAD]
                igb5: [ITHREAD]
                pcib10: <pci-pci bridge="">at device 4.0 on pci8
                pci10: <pci bus="">on pcib10
                igb6: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xbcc0-0xbcdf mem 0xdcbc0000-0xdcbdffff,0xdcc00000-0xdcffffff,0xdcbb8000-0xdcbbbfff irq 40 at device 0.0 on pci10
                igb6: Using MSIX interrupts with 5 vectors
                igb6: [ITHREAD]
                igb6: [ITHREAD]
                igb6: [ITHREAD]
                igb6: [ITHREAD]
                igb6: [ITHREAD]
                igb7: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">port 0xbce0-0xbcff mem 0xdcbe0000-0xdcbfffff,0xdd000000-0xdd3fffff,0xdcbbc000-0xdcbbffff irq 50 at device 0.1 on pci10
                igb7: Using MSIX interrupts with 5 vectors
                igb7: [ITHREAD]
                igb7: [ITHREAD]
                igb7: [ITHREAD]
                igb7: [ITHREAD]
                igb7: [ITHREAD]
                pcib11: <acpi pci-pci="" bridge="">at device 10.0 on pci0
                pci11: <acpi pci="" bus="">on pcib11
                pci0: <base peripheral,="" interrupt="" controller=""> at device 20.0 (no driver attached)
                pci0: <base peripheral,="" interrupt="" controller=""> at device 20.1 (no driver attached)
                pci0: <base peripheral,="" interrupt="" controller=""> at device 20.2 (no driver attached)
                uhci0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">port 0xac40-0xac5f irq 17 at device 26.0 on pci0
                uhci0: [ITHREAD]
                usbus0: <intel 82801ji="" (ich10)="" usb="" controller="" usb-d="">on uhci0
                uhci1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">port 0xac60-0xac7f irq 18 at device 26.1 on pci0
                uhci1: [ITHREAD]
                usbus1: <intel 82801ji="" (ich10)="" usb="" controller="" usb-e="">on uhci1
                ehci0: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">mem 0xde0fe000-0xde0fe3ff irq 19 at device 26.7 on pci0
                ehci0: [ITHREAD]
                usbus2: EHCI version 1.0
                usbus2: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-b="">on ehci0
                uhci2: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">port 0xac80-0xac9f irq 21 at device 29.0 on pci0
                uhci2: [ITHREAD]
                usbus3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-a="">on uhci2
                uhci3: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">port 0xaca0-0xacbf irq 20 at device 29.1 on pci0
                uhci3: [ITHREAD]
                usbus4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-b="">on uhci3
                uhci4: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">port 0xacc0-0xacdf irq 21 at device 29.2 on pci0
                uhci4: [ITHREAD]
                usbus5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-c="">on uhci4
                uhci5: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">port 0xace0-0xacff irq 20 at device 29.3 on pci0
                uhci5: [ITHREAD]
                usbus6: <intel 82801ji="" (ich10)="" usb="" controller="" usb-f="">on uhci5
                ehci1: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">mem 0xde0ff000-0xde0ff3ff irq 21 at device 29.7 on pci0
                ehci1: [ITHREAD]
                usbus7: EHCI version 1.0
                usbus7: <intel 82801ji="" (ich10)="" usb="" 2.0="" controller="" usb-a="">on ehci1
                pcib12: <acpi pci-pci="" bridge="">at device 30.0 on pci0
                pci12: <acpi pci="" bus="">on pcib12
                vgapci0: <vga-compatible display="">mem 0xd5800000-0xd5ffffff,0xda7fc000-0xda7fffff,0xda800000-0xdaffffff irq 19 at device 3.0 on pci12</vga-compatible></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></acpi></acpi></intel(r)></intel(r)></pci></pci-pci></intel(r)></intel(r)></pci></pci-pci></pci></pci-pci></acpi></acpi></intel(r)></intel(r)></pci></pci-pci></intel(r)></intel(r)></pci></pci-pci></pci></pci-pci></acpi></acpi></lsilogic></acpi></acpi></bcm5709c></mii></broadcom></bcm5709c></mii></broadcom></acpi></acpi></acpi></acpi></high></acpi></acpi></acpi></acpi></dell></software></version></version></dell ></lahf></nx,rdtscp,lm></sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe></ep1></dell></vendor></vendor></ata></dell></dp></teac></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></cpu></enhanced></cpu></enhanced></at></keyboard></generic></system></isa></at></ata></ata></intel></ata></ata></intel></isa></pci-isa></vga-compatible></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></acpi></acpi></intel(r)></intel(r)></pci></pci-pci></intel(r)></intel(r)></pci></pci-pci></pci></pci-pci></acpi></acpi></intel(r)></intel(r)></pci></pci-pci></intel(r)></intel(r)></pci></pci-pci></pci></pci-pci></acpi></acpi></lsilogic></acpi></acpi></bcm5709c></mii></broadcom></bcm5709c></mii></broadcom></acpi></acpi></acpi></acpi></high></acpi></acpi></dell></software></version></version></dell ></lahf></nx,rdtscp,lm></sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe></ep1></dell></vendor></vendor></ata></dell></dp></teac></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></cpu></enhanced></cpu></enhanced></at></keyboard></generic></system></isa></at></ata></ata></intel></ata></ata></intel></isa></pci-isa></vga-compatible></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></acpi></acpi></acpi></acpi></intel(r)></intel(r)></pci></pci-pci></intel(r)></intel(r)></pci></pci-pci></pci></pci-pci></acpi></acpi></lsilogic></acpi></acpi></bcm5709c></mii></broadcom></bcm5709c></mii></broadcom></acpi></acpi></acpi></acpi></high></acpi></acpi></dell></software></version></version></dell ></lahf></nx,rdtscp,lm></sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe></ep1></dell></vendor></vendor></ata></dell></dp></teac></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></at></keyboard></generic></system></isa></at></ata></ata></intel></ata></ata></intel></isa></pci-isa></vga-compatible></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></acpi></acpi></acpi></acpi></intel(r)></intel(r)></pci></pci-pci></intel(r)></intel(r)></pci></pci-pci></pci></pci-pci></acpi></acpi></lsilogic></acpi></acpi></bcm5709c></mii></broadcom></bcm5709c></mii></broadcom></acpi></acpi></acpi></acpi></high></acpi></acpi></acpi></acpi></dell></software></version></version></dell ></lahf></nx,rdtscp,lm></sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4.1,sse4.2,popcnt></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe></enter>

                1 Reply Last reply Reply Quote 0
                • T
                  the.it.dude
                  last edited by

                  So in summary…

                  It appears I can get the system up and running (without crippling the physical system) by installing 1st without any of the add-in nics installed.  However, this whole process has left me with an uneasy feeling to move forward into production with these systems.  Doesn't it stand to reason that if the install had such troubles than I may run into issues once the system is in production and under load?

                  Thanks,

                  Jeff

                  1 Reply Last reply Reply Quote 0
                  • W
                    wallabybob
                    last edited by

                    I can't offer an explanation for the difficulty you have had with the initial installs.

                    Maybe it would be worthwhile cloning the hard drive and putting the original away as a backup to help you get running again quickly if you have hard drive problems.

                    I expect there would be lots of pfSense users who rarely do an install; they do a firmware upgrade instead. I wouldn't be at all surprised if the install process is much less exercised than the "production" software.

                    1 Reply Last reply Reply Quote 0
                    • T
                      the.it.dude
                      last edited by

                      wallabybob,

                      Thanks for the suggestion.  These systems both have a Hardware RAID-1 setup.  I wanted the redundancy.  Makes pulling hard drives a more difficult and expensive process.  But, maybe it is worthwhile seeing if I can disable the RAID and see what happens during the install?

                      Jeff

                      1 Reply Last reply Reply Quote 0
                      • T
                        the.it.dude
                        last edited by

                        Disabling the RAID made no difference.

                        Also, I was too optimistic with my analysis.  Even though the system came up fine after installing the NIC cards, as soon as I started configuring it via the web interface, things got wacky.  After each change I would lose access to the web interface.  I could still ping the firewall and the console was still OK.  But, even restarting the webconfigurator from the console would not bring access to the web gui back.  I had to fully reboot the server.

                        I think I'll start up a new thread that references this thread.  Since this one is getting long winded, I want to post a summary of my issues and what my options are moving forward.

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post
                        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.