Lightsquid show me "500 - Internal Server Error" in graphics tab

jimp

If you reinstall the lightsquid package now, does it behave any differently?

I made some fixes yesterday, though I haven't tested it out on a fresh 1.2.3 vm.

Pistolero

If you reinstall the lightsquid package now, does it behave any differently?

I made some fixes yesterday, though I haven't tested it out on a fresh 1.2.3 vm.

I am having the very same issue, where the whole report page has been replaced by a "500 - Internal Server Error" in 2.0 RC1 version from yesterday. reinstalling makes no difference, sadly.

Is there a way we could fix this?

Thanks!

jimp

I know for a fact it's fine on 2.0. Update to RC3 (it's out officially) and if it doesn't work after the packages reinstall there (should happen automatically with the firmware update), try what I mention earlier in the thread (quoted below).

@jimp:

uninstall lightsquid, squidguard, and squid

Then go to Diagnostics > Command or the shell, and type:
pkg_delete -f \*squid\* perl\*
And then reinstall squid, squidguard, and lightsquid.

Hugovsky

2.0-RC3 (amd64)
built on Fri Jun 24 09:54:09 EDT 2011

squid + Lightquid + squidguard it's working perfectly. No special install order.

jikjik101

I still have this 500 ERROR.

Already tried:
@jimp:

I know for a fact it's fine on 2.0. Update to RC3 (it's out officially) and if it doesn't work after the packages reinstall there (should happen automatically with the firmware update), try what I mention earlier in the thread (quoted below).

@jimp:
uninstall lightsquid, squidguard, and squid

Then go to Diagnostics > Command or the shell, and type:
pkg_delete -f \*squid\* perl\*
And then reinstall squid, squidguard, and lightsquid.

Also tried install order but to no avail.

vladick0732

In the directory "/usr/bin" file appeared "perl 0 B 1970.01.01 03:00:00 (0) ? –- --- ---",
selected on the picture and you can not delete it, because it says that the file is not correct. What can I do?

perl321.jpg_thumb

vladick0732

Hi all!

After several re-installation of packages Squid and Lighsquid, it worked.
File has the normal value. What's the problem I still do not understand.

perl234.jpg_thumb

cyber7

What I did to get this working was:
ln -s /usr/local/bin/perl5.12.4 /usr/bin/perl
(after deleting the link: /usr/bin/perl)

Kind regards
Aubrey Kloppers
Cape Town

pdamianov

@cyber7:

What I did to get this working was:
ln -s /usr/local/bin/perl5.12.4 /usr/bin/perl
(after deleting the link: /usr/bin/perl)

Kind regards
Aubrey Kloppers
Cape Town

You are grate man. This solve my problem.

dmenezes

the problem is about the perl version or symlink to the perl subversion if u have more the one version installed on your system.
something like that

[2.0.1-RELEASE][root@pfsense.backbone]/usr/bin(41): pkg_info |grep perl
p5-GD-2.46 A perl5 interface to Gd Graphics Library version2
perl-5.10.1_3 Practical Extraction and Report Language
perl-5.12.3 Practical Extraction and Report Language
perl-5.12.4_3 Practical Extraction and Report Language

[2.0.1-RELEASE][root@pfsense.backbone]/usr/bin(17): ls -al /usr/local/bin/perl5*
lrwxr-xr-x 1 root wheel 25 Feb 1 15:47 /usr/local/bin/perl5 -> /usr/local/bin/perl5.12.3
-rwxr-xr-x 1 root wheel 7248 Feb 11 2011 /usr/local/bin/perl5.10.1
-rwxr-xr-x 2 root wheel 7304 Jun 29 2011 /usr/local/bin/perl5.12.3
-rwxr-xr-x 1 root wheel 7304 Jan 27 09:19 /usr/local/bin/perl5.12.4

change it:
from /usr/local/bin/perl5.12.3
to /usr/local/bin/perl5.12.4

[2.0.1-RELEASE][root@pfsense.backbone]/usr/bin(40): ls -al /usr/bin/perl*
lrwxr-xr-x 1 root wheel 25 Apr 2 13:10 /usr/bin/perl -> /usr/local/bin/perl5.12.4
lrwxr-xr-x 1 root wheel 25 Apr 2 13:23 /usr/bin/perl5 -> /usr/local/bin/perl5.12.4

arenasa

@cyber7:

What I did to get this working was:
ln -s /usr/local/bin/perl5.12.4 /usr/bin/perl
(after deleting the link: /usr/bin/perl)

Kind regards
Aubrey Kloppers
Cape Town

This works on 2.1 also. Shouldn't this placed as a bug somewhere so they fixed on the package?.

Regards,

Andrés.

jimp

It works fine on 2.1, at least it did every time I tested it. It also works fine for most people on 2.0.x. This isn't a general issue with the lightsquid package, so there isn't really anything to "fix". It's some odd combination of installed packages/files and ordering and who knows what, but most people have no problems with it.

mrmaveric

I fixed it by uninstalling all packages that require pearl (the last one you uninstall will also uninstall pearl), then when I reinstalled squid and lightsquid which reinstalled pearl. All the cache and logs created by squid were still there, no data loss.