Lightsquid show me "500 - Internal Server Error" in graphics tab

jimp

you could try to force it a bit:

uninstall lightsquid, squidguard, and squid

Then go to Diagnostics > Command or the shell, and type:

pkg_delete -f \*squid\* perl\*

And then reinstall squid, squidguard, and lightsquid.

ethermcman

The symlink trick and the reinstall trick didn't work either…
I'm really surprised that the Team did not fix this!
We are many people using pfsense in this configuration : squid > squidguard > lightsquid
This problem remains since the 1.2.3.
Any xml fix could be considered?

Thanks for all your hard work making us love pfSense.

jimp

If you reinstall the lightsquid package now, does it behave any differently?

I made some fixes yesterday, though I haven't tested it out on a fresh 1.2.3 vm.

Pistolero

@jimp:

If you reinstall the lightsquid package now, does it behave any differently?

I made some fixes yesterday, though I haven't tested it out on a fresh 1.2.3 vm.

I am having the very same issue, where the whole report page has been replaced by a "500 - Internal Server Error" in 2.0 RC1 version from yesterday. reinstalling makes no difference, sadly.

Is there a way we could fix this?

Thanks!

jimp

I know for a fact it's fine on 2.0. Update to RC3 (it's out officially) and if it doesn't work after the packages reinstall there (should happen automatically with the firmware update), try what I mention earlier in the thread (quoted below).

@jimp:

uninstall lightsquid, squidguard, and squid

Then go to Diagnostics > Command or the shell, and type:
pkg_delete -f \*squid\* perl\*
And then reinstall squid, squidguard, and lightsquid.

Hugovsky

2.0-RC3 (amd64)
built on Fri Jun 24 09:54:09 EDT 2011

squid + Lightquid + squidguard it's working perfectly. No special install order.

jikjik101

I still have this 500 ERROR.

Already tried:
@jimp:

I know for a fact it's fine on 2.0. Update to RC3 (it's out officially) and if it doesn't work after the packages reinstall there (should happen automatically with the firmware update), try what I mention earlier in the thread (quoted below).

@jimp:
uninstall lightsquid, squidguard, and squid

Then go to Diagnostics > Command or the shell, and type:
pkg_delete -f \*squid\* perl\*
And then reinstall squid, squidguard, and lightsquid.

Also tried install order but to no avail.

vladick0732

In the directory "/usr/bin" file appeared "perl 0 B 1970.01.01 03:00:00 (0) ? –- --- ---",
selected on the picture and you can not delete it, because it says that the file is not correct. What can I do?

perl321.jpg_thumb

vladick0732

Hi all!

After several re-installation of packages Squid and Lighsquid, it worked.
File has the normal value. What's the problem I still do not understand.

perl234.jpg_thumb

cyber7

What I did to get this working was:
ln -s /usr/local/bin/perl5.12.4 /usr/bin/perl
(after deleting the link: /usr/bin/perl)

Kind regards
Aubrey Kloppers
Cape Town

pdamianov

@cyber7:

What I did to get this working was:
ln -s /usr/local/bin/perl5.12.4 /usr/bin/perl
(after deleting the link: /usr/bin/perl)

Kind regards
Aubrey Kloppers
Cape Town

You are grate man. This solve my problem.

dmenezes

the problem is about the perl version or symlink to the perl subversion if u have more the one version installed on your system.
something like that

[2.0.1-RELEASE][root@pfsense.backbone]/usr/bin(41): pkg_info |grep perl
p5-GD-2.46 A perl5 interface to Gd Graphics Library version2
perl-5.10.1_3 Practical Extraction and Report Language
perl-5.12.3 Practical Extraction and Report Language
perl-5.12.4_3 Practical Extraction and Report Language

[2.0.1-RELEASE][root@pfsense.backbone]/usr/bin(17): ls -al /usr/local/bin/perl5*
lrwxr-xr-x 1 root wheel 25 Feb 1 15:47 /usr/local/bin/perl5 -> /usr/local/bin/perl5.12.3
-rwxr-xr-x 1 root wheel 7248 Feb 11 2011 /usr/local/bin/perl5.10.1
-rwxr-xr-x 2 root wheel 7304 Jun 29 2011 /usr/local/bin/perl5.12.3
-rwxr-xr-x 1 root wheel 7304 Jan 27 09:19 /usr/local/bin/perl5.12.4

change it:
from /usr/local/bin/perl5.12.3
to /usr/local/bin/perl5.12.4

[2.0.1-RELEASE][root@pfsense.backbone]/usr/bin(40): ls -al /usr/bin/perl*
lrwxr-xr-x 1 root wheel 25 Apr 2 13:10 /usr/bin/perl -> /usr/local/bin/perl5.12.4
lrwxr-xr-x 1 root wheel 25 Apr 2 13:23 /usr/bin/perl5 -> /usr/local/bin/perl5.12.4

arenasa

@cyber7:

What I did to get this working was:
ln -s /usr/local/bin/perl5.12.4 /usr/bin/perl
(after deleting the link: /usr/bin/perl)

Kind regards
Aubrey Kloppers
Cape Town

This works on 2.1 also. Shouldn't this placed as a bug somewhere so they fixed on the package?.

Regards,

Andrés.

jimp

It works fine on 2.1, at least it did every time I tested it. It also works fine for most people on 2.0.x. This isn't a general issue with the lightsquid package, so there isn't really anything to "fix". It's some odd combination of installed packages/files and ordering and who knows what, but most people have no problems with it.

mrmaveric

I fixed it by uninstalling all packages that require pearl (the last one you uninstall will also uninstall pearl), then when I reinstalled squid and lightsquid which reinstalled pearl. All the cache and logs created by squid were still there, no data loss.