Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Watchguard Firebox XTM 8 Series

    Hardware
    23
    234
    113.0k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • E
      Eams
      last edited by

      Not been on here as much as I expected recently however… I have made some progress!

      Forgive me for the lack of PuTTY log for the UDMA/SMART message :(

      I've managed to connect a monitor to the onboard VGA connector and I can now see whats happening!

      Having gotten nowhere with the nanobsd serial builds due to it being complied for COM1 and this machine having no COM1, I've been trying with the vga builds as they output to text. However they were still no good - it didn't redirect the text screen to COM2  :(

      While trying the above on build of pfSense-memstick-2.1-BETA1-i386-20130510-1628.img.gz I had the monitor attached but it's giving me errors about partitioning!

      Eamon

      ![2013-05-13 18.21.30-small.jpg](/public/imported_attachments/1/2013-05-13 18.21.30-small.jpg)
      ![2013-05-13 18.21.30-small.jpg_thumb](/public/imported_attachments/1/2013-05-13 18.21.30-small.jpg_thumb)
      ![2013-05-13 18.21.53-small.jpg](/public/imported_attachments/1/2013-05-13 18.21.53-small.jpg)
      ![2013-05-13 18.21.53-small.jpg_thumb](/public/imported_attachments/1/2013-05-13 18.21.53-small.jpg_thumb)

      1 Reply Last reply Reply Quote 0
      • E
        Eams
        last edited by

        Oh forgot to add, I connected a keyboard via usb and it works :)

        Eamon

        1 Reply Last reply Reply Quote 0
        • stephenw10S
          stephenw10 Netgate Administrator
          last edited by

          Loving your VGA hook up!  ;)

          The memstick image expects to be connected via USB so if you put it on a CF card it will probably complain.

          So with the monitor connected you still can't boot the nano_vga image?
          Hmm, I wonder if it set to use dual consoles. I suspect that anything hard coded to talk to the com1 resources will have a problem when they are not available. You'd hope it would fail gracefully but I no idea.

          Steve

          1 Reply Last reply Reply Quote 0
          • E
            Eams
            last edited by

            Haha, the vga hookup was one of two ways and this was easiest that didn't involve cutting any wires or anything.

            Only connected green as I figured it'd let me see everything - apart from bold white!

            I'm just writing a nano_vga image as I type on the sandisk 4gig cf card - this one will take the 4gig image!

            Eamon

            1 Reply Last reply Reply Quote 0
            • E
              Eams
              last edited by

              Getting some weird READ_DMA error.

              Obligatory dmesg:

              $ dmesg
              Copyright © 1992-2010 The FreeBSD Project.
              Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
              The Regents of the University of California. All rights reserved.
              FreeBSD is a registered trademark of The FreeBSD Foundation.
              FreeBSD 8.1-RELEASE-p13 #0: Fri Apr 12 11:55:06 EDT 2013
                  root@snapshots-8_1-amd64.builders.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_wrap_vga.8.amd64 amd64
              Timecounter "i8254" frequency 1193182 Hz quality 0
              CPU: Intel(R) Core(TM)2 Quad CPU    Q9400  @ 2.66GHz (2660.01-MHz K8-class CPU)
                Origin = "GenuineIntel"  Id = 0x1067a  Family = 6  Model = 17  Stepping = 10
                Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x408e3fd <sse3,dtes64,mon,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4.1,xsave>AMD Features=0x20100800 <syscall,nx,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant
              real memory  = 2147483648 (2048 MB)
              avail memory = 2043940864 (1949 MB)
              ACPI APIC Table: <120208 APIC1015>
              FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
              FreeBSD/SMP: 1 package(s) x 4 core(s)
              cpu0 (BSP): APIC ID:  0
              cpu1 (AP): APIC ID:  1
              cpu2 (AP): APIC ID:  2
              cpu3 (AP): APIC ID:  3
              ioapic0 <version 2.0="">irqs 0-23 on motherboard
              ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
              ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
              module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8040b400, 0) error 1
              wlan: mac acl policy registered
              ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
              ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
              module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8040b4a0, 0) error 1
              ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
              ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
              module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8040b540, 0) error 1
              wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
              wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
              module_register_init: MOD_LOAD (wpi_fw, 0xffffffff8058a010, 0) error 1
              kbd1 at kbdmux0
              cryptosoft0: <software crypto="">on motherboard
              padlock0: No ACE support.
              acpi0: <120208 XSDT1015> on motherboard
              acpi0: [ITHREAD]
              acpi0: Power Button (fixed)
              acpi0: reservation of 0, a0000 (3) failed
              acpi0: reservation of 100000, 7f600000 (3) failed
              Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
              acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
              cpu0: <acpi cpu="">on acpi0
              cpu1: <acpi cpu="">on acpi0
              cpu2: <acpi cpu="">on acpi0
              cpu3: <acpi cpu="">on acpi0
              pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
              pci0: <acpi pci="" bus="">on pcib0
              pcib1: <acpi pci-pci="" bridge="">irq 16 at device 1.0 on pci0
              pci7: <acpi pci="" bus="">on pcib1
              pcib2: <pci-pci bridge="">mem 0xfe7e0000-0xfe7fffff irq 16 at device 0.0 on pci7
              pci8: <pci bus="">on pcib2
              pcib3: <pci-pci bridge="">irq 16 at device 0.0 on pci8
              pci14: <pci bus="">on pcib3
              pci14: <encrypt decrypt,="" network="" computer="" crypto="">at device 0.0 (no driver attached)
              pcib4: <pci-pci bridge="">irq 17 at device 1.0 on pci8
              pci13: <pci bus="">on pcib4
              em0: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0xec00-0xec1f mem 0xfebe0000-0xfebfffff,0xfebdc000-0xfebdffff irq 17 at device 0.0 on pci13
              em0: Using MSIX interrupts with 3 vectors
              em0: [ITHREAD]
              em0: [ITHREAD]
              em0: [ITHREAD]
              pcib5: <pci-pci bridge="">irq 16 at device 4.0 on pci8
              pci12: <pci bus="">on pcib5
              pcib6: <pci-pci bridge="">irq 18 at device 6.0 on pci8
              pci11: <pci bus="">on pcib6
              em1: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0xdc00-0xdc1f mem 0xfeae0000-0xfeafffff,0xfeadc000-0xfeadffff irq 18 at device 0.0 on pci11
              em1: Using MSIX interrupts with 3 vectors
              em1: [ITHREAD]
              em1: [ITHREAD]
              em1: [ITHREAD]
              pcib7: <pci-pci bridge="">irq 16 at device 8.0 on pci8
              pci10: <pci bus="">on pcib7
              em2: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0xcc00-0xcc1f mem 0xfe9e0000-0xfe9fffff,0xfe9dc000-0xfe9dffff irq 16 at device 0.0 on pci10
              em2: Using MSIX interrupts with 3 vectors
              em2: [ITHREAD]
              em2: [ITHREAD]
              em2: [ITHREAD]
              pcib8: <pci-pci bridge="">irq 17 at device 9.0 on pci8
              pci9: <pci bus="">on pcib8
              em3: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0xbc00-0xbc1f mem 0xfe8e0000-0xfe8fffff,0xfe8dc000-0xfe8dffff irq 17 at device 0.0 on pci9
              em3: Using MSIX interrupts with 3 vectors
              em3: [ITHREAD]
              em3: [ITHREAD]
              em3: [ITHREAD]
              vgapci0: <vga-compatible display="">port 0x3800-0x3807 mem 0xfe100000-0xfe17ffff,0xd0000000-0xdfffffff,0xfe000000-0xfe0fffff irq 16 at device 2.0 on pci0
              em4: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0x3880-0x389f mem 0xfe1c0000-0xfe1dffff,0xfe1fe000-0xfe1fefff irq 20 at device 25.0 on pci0
              em4: Using an MSI interrupt
              em4: [FILTER]
              pcib9: <acpi pci-pci="" bridge="">irq 17 at device 28.0 on pci0
              pci6: <acpi pci="" bus="">on pcib9
              em5: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0xac00-0xac1f mem 0xfe6e0000-0xfe6fffff irq 16 at device 0.0 on pci6
              em5: Using an MSI interrupt
              em5: [FILTER]
              pcib10: <acpi pci-pci="" bridge="">irq 16 at device 28.1 on pci0
              pci5: <acpi pci="" bus="">on pcib10
              em6: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0x9c00-0x9c1f mem 0xfe5e0000-0xfe5fffff irq 17 at device 0.0 on pci5
              em6: Using an MSI interrupt
              em6: [FILTER]
              pcib11: <acpi pci-pci="" bridge="">irq 18 at device 28.2 on pci0
              pci4: <acpi pci="" bus="">on pcib11
              em7: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0x8c00-0x8c1f mem 0xfe4e0000-0xfe4fffff irq 18 at device 0.0 on pci4
              em7: Using an MSI interrupt
              em7: [FILTER]
              pcib12: <acpi pci-pci="" bridge="">irq 19 at device 28.3 on pci0
              pci3: <acpi pci="" bus="">on pcib12
              em8: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0x7c00-0x7c1f mem 0xfe3e0000-0xfe3fffff irq 19 at device 0.0 on pci3
              em8: Using an MSI interrupt
              em8: [FILTER]
              pcib13: <acpi pci-pci="" bridge="">irq 17 at device 28.4 on pci0
              pci2: <acpi pci="" bus="">on pcib13
              em9: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0x6c00-0x6c1f mem 0xfe2e0000-0xfe2fffff irq 16 at device 0.0 on pci2
              em9: Using an MSI interrupt
              em9: [FILTER]
              uhci0: <intel 82801i="" (ich9)="" usb="" controller="">port 0x3c00-0x3c1f irq 23 at device 29.0 on pci0
              uhci0: [ITHREAD]
              usbus0: <intel 82801i="" (ich9)="" usb="" controller="">on uhci0
              uhci1: <intel 82801i="" (ich9)="" usb="" controller="">port 0x4000-0x401f irq 19 at device 29.1 on pci0
              uhci1: [ITHREAD]
              usbus1: <intel 82801i="" (ich9)="" usb="" controller="">on uhci1
              ehci0: <intel 82801i="" (ich9)="" usb="" 2.0="" controller="">mem 0xfe1ff800-0xfe1ffbff irq 23 at device 29.7 on pci0
              ehci0: [ITHREAD]
              usbus2: EHCI version 1.0
              usbus2: <intel 82801i="" (ich9)="" usb="" 2.0="" controller="">on ehci0
              pcib14: <acpi pci-pci="" bridge="">at device 30.0 on pci0
              pci1: <acpi pci="" bus="">on pcib14
              isab0: <pci-isa bridge="">at device 31.0 on pci0
              isa0: <isa bus="">on isab0
              atapci0: <intel ich9="" sata300="" controller="">port 0x4c00-0x4c07,0x4880-0x4883,0x4800-0x4807,0x4480-0x4483,0x4400-0x440f,0x4080-0x408f irq 19 at device 31.2 on pci0
              atapci0: [ITHREAD]
              ata2: <ata 0="" channel="">on atapci0
              ata2: [ITHREAD]
              ata3: <ata 1="" channel="">on atapci0
              ata3: [ITHREAD]
              pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
              atapci1: <intel ich9="" sata300="" controller="">port 0x5c00-0x5c07,0x5880-0x5883,0x5800-0x5807,0x5480-0x5483,0x5400-0x540f,0x5080-0x508f irq 19 at device 31.5 on pci0
              atapci1: [ITHREAD]
              ata4: <ata 0="" channel="">on atapci1
              ata4: [ITHREAD]
              ata5: <ata 1="" channel="">on atapci1
              ata5: [ITHREAD]
              acpi_button0: <power button="">on acpi0
              atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0
              uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
              uart1: [FILTER]
              ppc0: <parallel port="">port 0x378-0x37f irq 7 on acpi0
              ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
              ppc0: [ITHREAD]
              ppbus0: <parallel port="" bus="">on ppc0
              ppi0: <parallel i="" o="">on ppbus0
              sc0: <system console="">at flags 0x100 on isa0
              sc0: VGA <16 virtual consoles, flags=0x300>
              vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
              atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
              atkbd0: <at keyboard="">irq 1 on atkbdc0
              kbd0 at atkbd0
              atkbd0: [GIANT-LOCKED]
              atkbd0: [ITHREAD]
              Timecounters tick every 10.000 msec
              IPsec: Initialized Security Association Processing.
              usbus0: 12Mbps Full Speed USB v1.0
              usbus1: 12Mbps Full Speed USB v1.0
              usbus2: 480Mbps High Speed USB v2.0
              ad7: 3815MB <sandisk sdcfh-004g="" hdx="" 7.07="">at ata3-slave UDMA33 SATA 1.5Gb/s
              ugen0.1: <intel>at usbus0
              uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
              ugen1.1: <intel>at usbus1
              uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
              ugen2.1: <intel>at usbus2
              uhub2: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus2
              uhub0: 2 ports with 2 removable, self powered
              uhub1: 2 ports with 2 removable, self powered
              uhub2: 4 ports with 4 removable, self powered
              ugen0.2: <chicony>at usbus0
              ukbd0: <chicony 0="" 2="" usb="" keyboard,="" class="" 0,="" rev="" 2.00="" 1.57,="" addr="">on usbus0
              kbd2 at ukbd0
              ad7: FAILURE - READ_DMA timed out LBA=7813117
              ad7: TIMEOUT - READ_DMA retrying (1 retry left) LBA=7813119
              ad7: FAILURE - READ_DMA timed out LBA=7813103
              ad7: TIMEOUT - READ_DMA retrying (0 retries left) LBA=7813119
              ad7: FAILURE - READ_DMA timed out LBA=7813116
              ad7: FAILURE - READ_DMA timed out LBA=7813119
              ad7: FAILURE - READ_DMA timed out LBA=7813119
              ad7: FAILURE - READ_DMA timed out LBA=7813119
              SMP: AP CPU #1 Launched!
              SMP: AP CPU #2 Launched!
              SMP: AP CPU #3 Launched!
              ad7: TIMEOUT - READ_DMA retrying (1 retry left) LBA=7813119
              ad7: TIMEOUT - READ_DMA retrying (0 retries left) LBA=7813119
              ad7: FAILURE - READ_DMA timed out LBA=7813119
              Trying to mount root from ufs:/dev/ufs/pfsense0
              ad7: FAILURE - SETFEATURES 0x85 status=51 <ready,dsc,error>error=4 <aborted>pflog0: promiscuous mode enabled
              ad7: TIMEOUT - READ_DMA retrying (1 retry left) LBA=7813119
              ad7: TIMEOUT - READ_DMA retrying (0 retries left) LBA=7813119
              ad7: FAILURE - READ_DMA timed out LBA=7813119
              ad7: TIMEOUT - READ_DMA retrying (1 retry left) LBA=7813119
              ad7: TIMEOUT - READ_DMA retrying (0 retries left) LBA=7813119

              Eamon</aborted></ready,dsc,error></chicony></chicony></intel></intel></intel></intel></intel></intel></sandisk></at></keyboard></generic></system></parallel></parallel></parallel></at></power></ata></ata></intel></serial></ata></ata></intel></isa></pci-isa></acpi></acpi></intel></intel></intel></intel></intel></intel></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></vga-compatible></intel(r)></pci></pci-pci></intel(r)></pci></pci-pci></intel(r)></pci></pci-pci></pci></pci-pci></intel(r)></pci></pci-pci></encrypt></pci></pci-pci></pci></pci-pci></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></software></version></lahf></syscall,nx,lm></sse3,dtes64,mon,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4.1,xsave></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                Right, that's what I mentioned earlier. The nanobsd_vga images have DMA enabled because of a specific device but many CF card slots do not have enough pins. Probably that's what's happening here.
                Interrupt the boot process at the loader menu and do this:
                http://doc.pfsense.org/index.php/Booting_Options#Disable_DMA_for_IDE_drives

                Steve

                1 Reply Last reply Reply Quote 0
                • W
                  wallabybob
                  last edited by

                  My suspicion, based on the high LBA reported, is that your 4GB card is a bit short of providing 4GiB (1024 x 1024 x 1024) and the 4G image didn't quite fit. Some people have had to put a 2GB image on  a "4GB" card/stick. Note the card is reported having 3815MB which would allow a LBA of up to around 7630000 which is a bit short of the reported LBAs.

                  If I recall correctly, the FreeBSD GEOM component goes looking for a GEOM signature on the apparent last sector or two of the disk.

                  1 Reply Last reply Reply Quote 0
                  • E
                    Eams
                    last edited by

                    I put a 2g nano_vga 64bit image on the same card and got the same LBA error.

                    Did the set hw.ata.atapi_dma=0 thing too which stopped the LBA errors, however got a different LBA error!

                    ad7: 3815MB <sandisk sdcfh-004g="" hdx="" 7.07="">at ata3-slave PIO4 SATA 1.5Gb/s
                    ad7: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813117
                    ad7: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
                    ad7: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813103
                    ad7: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813116
                    ad7: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
                    ad7: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
                    SMP: AP CPU #2 Launched!
                    SMP: AP CPU #1 Launched!
                    SMP: AP CPU #3 Launched!
                    ugen0.u1g:ue gn <e2i.nn11t.:e 1l:<="">I <naittne ltue="">s lb>au ts a0tus
                    ubsubsu2s
                    u1h
                    ub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
                    uhub1: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus2
                    uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
                    ad7: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
                    Root mount waiting for: usbus2 usbus1 usbus0
                    uhub2: 2 ports with 2 removable, self powered
                    uhub0: 2 ports with 2 removable, self powered
                    Root mount waiting for: usbus2
                    uhub1: 4 ports with 4 removable, self powered
                    Trying to mount root from ufs:/dev/ufs/pfsense0
                    ad7: FAILURE - SETFEATURES 0x85 status=51 <ready,dsc,error>error=4 <aborted>ugen0.2: <chicony>at usbus0
                    ukbd0: <chicony 0="" 2="" usb="" keyboard,="" class="" 0,="" rev="" 2.00="" 1.57,="" addr="">on usbus0
                    kbd2 at ukbd0
                    pflog0: promiscuous mode enabled
                    ad7: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
                    ad7: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
                    ad7: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
                    ad7: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
                    ad7: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
                    ad7: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
                    ad7: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
                    ad7: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
                    ad7: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
                    ad7: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119

                    Burning 2g nano_vga 32bit gives the same error on the same card (4gig SanDisk Ultra)

                    Booting up on the no name cf card with the same 32bit 2g nano_vga image gives no errors - no ser hw.ata.ata_dma=0 performed - wierd;

                    ad7: 3639MB <cf card="" ver5.04="">at ata3-slave UDMA33 SATA 1.5Gb/s
                    SMP: AP CPU #2 Launched!
                    SMP: AP CPU #1 Launched!
                    SMP: AP CPU #3 Launched!
                    ugen0u.1g:e n<2I.n1t:e l<>I natte l>u saubtu guss0beuns1
                    2.1
                    : <intel>at usbus1
                    uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
                    uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
                    uhub2: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus2
                    Root mount waiting for: usbus2 usbus1 usbus0
                    uhub1: 2 ports with 2 removable, self powered
                    uhub0: 2 ports with 2 removable, self powered
                    Root mount waiting for: usbus2
                    uhub2: 4 ports with 4 removable, self powered
                    Trying to mount root from ufs:/dev/ufs/pfsense0
                    ugen0.2: <chicony>at usbus0
                    ukbd0: <chicony 0="" 2="" usb="" keyboard,="" class="" 0,="" rev="" 2.00="" 1.57,="" addr="">on usbus0
                    kbd2 at ukbd0
                    pflog0: promiscuous mode enabled

                    How very bizarre.

                    Eamon</chicony></chicony></intel></intel></intel></intel></cf></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></chicony></chicony></aborted></ready,dsc,error></nid_not_found></ready,dsc,error></intel></intel></intel></naittne></e2i.nn11t.:e></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></sandisk>

                    1 Reply Last reply Reply Quote 0
                    • stephenw10S
                      stephenw10 Netgate Administrator
                      last edited by

                      The 'nid not found' error is common and nothing to worry about:
                      http://doc.pfsense.org/index.php/DMA_and_LBA_Errors

                      I would guess that your no-name card is not DMA capable so didn't cause the problem.

                      Did it boot successfully then?

                      Steve

                      1 Reply Last reply Reply Quote 0
                      • E
                        Eams
                        last edited by

                        Damn I bought the exact same cf card that's in that link! I guess that's that error sorted then.

                        Yes it did boot, even with the LBA errors, looks like it was a combination of both errors mentioned by yourself and wallabybob.
                        Its pretty nippy to say the least  ;)
                        I gotta figure out how to set it up now. At least 10x GbE ports gives me plenty to play with haha!

                        I've contacted Lanner to see if I can get the BIOS for the 8750 this is based on, that would help even further.

                        Eamon

                        1 Reply Last reply Reply Quote 0
                        • F
                          fmertz
                          last edited by

                          @Eams:

                          The LCD seems to be the same as previous models as you say so should be ok.

                          There is an arm/disarm led on the front, it hasn't lit up yet.

                          There is some useful info there about the FW-8750 of which this board seems to be from:

                          Platform
                          Chipset: Intel Q35 + ICH9D0

                          Eamon

                          The LCD code assumes parallel port, so, at a minimum, the sdeclcd driver part of the lcdproc package should run. Might even work, too.

                          For the LEDs, the driver code supports the various models based on standard PCI detection of the ICH. We definitely need to add an entry for this ICH9 in the driver code. Once you guys get around to it, can you confirm this is, in fact, an ICH9D0, identified by Vendor x8086, device x2914 (the numbers are listed on page 12 of the "Intel® I/O Controller Hub 9 (ICH9) Family Specification Update")?

                          Generally, the LEDs can be wired off of the GPIO device part of this ICH (like in the older models), but, more likely, they are wired off of the SuperIO chip (like the XTM 5). A further screen shot seems to list an ITE8718. This is where the research comes in to identify which line these LEDs are wired off of. I'll be happy to code this in when it is discovered.

                          1 Reply Last reply Reply Quote 0
                          • stephenw10S
                            stephenw10 Netgate Administrator
                            last edited by

                            Commence experimental probing!  ;D

                            Since you don't have the Watchguard OS we can't look for clues in it's boot messages.

                            Not using a Winbond sio chip, interesting.

                            You could extract the bios code with flashrom and look at it for hidden menus.

                            Steve

                            Edit: Looks to be supported by superiotool as well.

                            1 Reply Last reply Reply Quote 0
                            • E
                              Eams
                              last edited by

                              fmertz:
                              Ok, fired up lcdproc, but nothing seems to happen :(

                              The boot up screen shows 'Starting package LCDproc…done.'

                              Under Status: Services it shows as Stopped. Clicking to start it doesn't change it's status.

                              ICH9 Chipset - think you were right, experimental probe..:

                              $ pciconf -lc
                              hostb0@pci0:0:0:0: class=0x060000 card=0x29b08086 chip=0x29b08086 rev=0x02 hdr=0x00
                                 cap 09[e0] = vendor (length 11) Intel cap 11 version 1
                              pcib1@pci0:0:1:0: class=0x060400 card=0x29b18086 chip=0x29b18086 rev=0x02 hdr=0x01
                                 cap 0d[88] = PCI Bridge card=0x29b18086
                                 cap 01[80] = powerspec 3  supports D0 D3  current D0
                                 cap 05[90] = MSI supports 1 message
                                 cap 10[a0] = PCI-Express 1 root port max data 128(128) link x4(x16)
                              vgapci0@pci0:0:2:0: class=0x030000 card=0x29b28086 chip=0x29b28086 rev=0x02 hdr=0x00
                                 cap 05[90] = MSI supports 1 message
                                 cap 01[d0] = powerspec 2  supports D0 D3  current D0
                              em4@pci0:0:25:0: class=0x020000 card=0x00008086 chip=0x10bd8086 rev=0x02 hdr=0x00
                                 cap 01[c8] = powerspec 2  supports D0 D3  current D0
                                 cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
                                 cap 13[e0] = PCI Advanced Features: FLR TP
                              pcib9@pci0:0:28:0: class=0x060400 card=0x29408086 chip=0x29408086 rev=0x02 hdr=0x01
                                 cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1)
                                 cap 05[80] = MSI supports 1 message
                                 cap 0d[90] = PCI Bridge card=0x29408086
                                 cap 01[a0] = powerspec 2  supports D0 D3  current D0
                              pcib10@pci0:0:28:1: class=0x060400 card=0x29428086 chip=0x29428086 rev=0x02 hdr=0x01
                                 cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1)
                                 cap 05[80] = MSI supports 1 message
                                 cap 0d[90] = PCI Bridge card=0x29428086
                                 cap 01[a0] = powerspec 2  supports D0 D3  current D0
                              pcib11@pci0:0:28:2: class=0x060400 card=0x29448086 chip=0x29448086 rev=0x02 hdr=0x01
                                 cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1)
                                 cap 05[80] = MSI supports 1 message
                                 cap 0d[90] = PCI Bridge card=0x29448086
                                 cap 01[a0] = powerspec 2  supports D0 D3  current D0
                              pcib12@pci0:0:28:3: class=0x060400 card=0x29468086 chip=0x29468086 rev=0x02 hdr=0x01
                                 cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1)
                                 cap 05[80] = MSI supports 1 message
                                 cap 0d[90] = PCI Bridge card=0x29468086
                                 cap 01[a0] = powerspec 2  supports D0 D3  current D0
                              pcib13@pci0:0:28:4: class=0x060400 card=0x29488086 chip=0x29488086 rev=0x02 hdr=0x01
                                 cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1)
                                 cap 05[80] = MSI supports 1 message
                                 cap 0d[90] = PCI Bridge card=0x29488086
                                 cap 01[a0] = powerspec 2  supports D0 D3  current D0
                              uhci0@pci0:0:29:0: class=0x0c0300 card=0x29348086 chip=0x29348086 rev=0x02 hdr=0x00
                                 cap 13[50] = PCI Advanced Features: FLR TP
                              uhci1@pci0:0:29:1: class=0x0c0300 card=0x29358086 chip=0x29358086 rev=0x02 hdr=0x00
                                 cap 13[50] = PCI Advanced Features: FLR TP
                              ehci0@pci0:0:29:7: class=0x0c0320 card=0x293a8086 chip=0x293a8086 rev=0x02 hdr=0x00
                                 cap 01[50] = powerspec 2  supports D0 D3  current D0
                                 cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
                                 cap 13[98] = PCI Advanced Features: FLR TP
                              pcib14@pci0:0:30:0: class=0x060401 card=0x244e8086 chip=0x244e8086 rev=0x92 hdr=0x01
                                 cap 0d[50] = PCI Bridge card=0x244e8086
                              isab0@pci0:0:31:0: class=0x060100 card=0x29148086 chip=0x29148086 rev=0x02 hdr=0x00
                                 cap 09[e0] = vendor (length 12) Intel cap 1 version 0
                              features: SATA RAID-5, 4 PCI-e x1 slots
                              atapci0@pci0:0:31:2: class=0x01018f card=0x29208086 chip=0x29208086 rev=0x02 hdr=0x00
                                 cap 01[70] = powerspec 3  supports D0 D3  current D0
                                 cap 13[b0] = PCI Advanced Features: FLR TP
                              none0@pci0:0:31:3: class=0x0c0500 card=0x29308086 chip=0x29308086 rev=0x02 hdr=0x00
                              atapci1@pci0:0:31:5: class=0x010185 card=0x29268086 chip=0x29268086 rev=0x02 hdr=0x00
                                 cap 01[70] = powerspec 3  supports D0 D3  current D0
                                 cap 13[b0] = PCI Advanced Features: FLR TP
                              pcib2@pci0:7:0:0: class=0x060400 card=0x862410b5 chip=0x862410b5 rev=0xbb hdr=0x01
                                 cap 01[40] = powerspec 3  supports D0 D3  current D0
                                 cap 05[48] = MSI supports 4 messages, 64 bit, vector masks
                                 cap 10[68] = PCI-Express 2 upstream port max data 128(2048) link x4(x4)
                                 cap 0d[a4] = PCI Bridge card=0x862410b5
                              pcib3@pci0:8:0:0: class=0x060400 card=0x862410b5 chip=0x862410b5 rev=0xbb hdr=0x01
                                 cap 01[40] = powerspec 3  supports D0 D3  current D0
                                 cap 05[48] = MSI supports 4 messages, 64 bit, vector masks
                                 cap 10[68] = PCI-Express 2 downstream port max data 128(2048) link x4(x4)
                                 cap 0d[a4] = PCI Bridge card=0x862410b5
                              pcib4@pci0:8:1:0: class=0x060400 card=0x862410b5 chip=0x862410b5 rev=0xbb hdr=0x01
                                 cap 01[40] = powerspec 3  supports D0 D3  current D0
                                 cap 05[48] = MSI supports 4 messages, 64 bit, vector masks
                                 cap 10[68] = PCI-Express 2 downstream port max data 128(2048) link x1(x4)
                                 cap 0d[a4] = PCI Bridge card=0x862410b5
                              pcib5@pci0:8:4:0: class=0x060400 card=0x862410b5 chip=0x862410b5 rev=0xbb hdr=0x01
                                 cap 01[40] = powerspec 3  supports D0 D3  current D0
                                 cap 05[48] = MSI supports 4 messages, 64 bit, vector masks
                                 cap 10[68] = PCI-Express 2 downstream port max data 128(2048) link x0(x8)
                                 cap 0d[a4] = PCI Bridge card=0x862410b5
                              pcib6@pci0:8:6:0: class=0x060400 card=0x862410b5 chip=0x862410b5 rev=0xbb hdr=0x01
                                 cap 01[40] = powerspec 3  supports D0 D3  current D0
                                 cap 05[48] = MSI supports 4 messages, 64 bit, vector masks
                                 cap 10[68] = PCI-Express 2 downstream port max data 128(2048) link x1(x4)
                                 cap 0d[a4] = PCI Bridge card=0x862410b5
                              pcib7@pci0:8:8:0: class=0x060400 card=0x862410b5 chip=0x862410b5 rev=0xbb hdr=0x01
                                 cap 01[40] = powerspec 3  supports D0 D3  current D0
                                 cap 05[48] = MSI supports 4 messages, 64 bit, vector masks
                                 cap 10[68] = PCI-Express 2 downstream port max data 128(2048) link x1(x4)
                                 cap 0d[a4] = PCI Bridge card=0x862410b5
                              pcib8@pci0:8:9:0: class=0x060400 card=0x862410b5 chip=0x862410b5 rev=0xbb hdr=0x01
                                 cap 01[40] = powerspec 3  supports D0 D3  current D0
                                 cap 05[48] = MSI supports 4 messages, 64 bit, vector masks
                                 cap 10[68] = PCI-Express 2 downstream port max data 128(2048) link x1(x4)
                                 cap 0d[a4] = PCI Bridge card=0x862410b5
                              none1@pci0:14:0:0: class=0x100000 card=0x0001177d chip=0x0010177d rev=0x01 hdr=0x00
                                 cap 01[40] = powerspec 3  supports D0 D3  current D0
                                 cap 05[50] = MSI supports 1 message, 64 bit
                                 cap 10[70] = PCI-Express 1 endpoint max data 128(256) link x4(x4)
                              em0@pci0:13:0:0: class=0x020000 card=0x00008086 chip=0x10d38086 rev=0x00 hdr=0x00
                                 cap 01[c8] = powerspec 2  supports D0 D3  current D0
                                 cap 05[d0] = MSI supports 1 message, 64 bit
                                 cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)
                                 cap 11[a0] = MSI-X supports 3 messages in map 0x1c enabled
                              em1@pci0:11:0:0: class=0x020000 card=0x00008086 chip=0x10d38086 rev=0x00 hdr=0x00
                                 cap 01[c8] = powerspec 2  supports D0 D3  current D0
                                 cap 05[d0] = MSI supports 1 message, 64 bit
                                 cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)
                                 cap 11[a0] = MSI-X supports 3 messages in map 0x1c enabled
                              em2@pci0:10:0:0: class=0x020000 card=0x00008086 chip=0x10d38086 rev=0x00 hdr=0x00
                                 cap 01[c8] = powerspec 2  supports D0 D3  current D0
                                 cap 05[d0] = MSI supports 1 message, 64 bit
                                 cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)
                                 cap 11[a0] = MSI-X supports 3 messages in map 0x1c enabled
                              em3@pci0:9:0:0: class=0x020000 card=0x00008086 chip=0x10d38086 rev=0x00 hdr=0x00
                                 cap 01[c8] = powerspec 2  supports D0 D3  current D0
                                 cap 05[d0] = MSI supports 1 message, 64 bit
                                 cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)
                                 cap 11[a0] = MSI-X supports 3 messages in map 0x1c enabled
                              em5@pci0:6:0:0: class=0x020000 card=0x00008086 chip=0x109a8086 rev=0x00 hdr=0x00
                                 cap 01[c8] = powerspec 2  supports D0 D3  current D0
                                 cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
                                 cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)
                              em6@pci0:5:0:0: class=0x020000 card=0x00008086 chip=0x109a8086 rev=0x00 hdr=0x00
                                 cap 01[c8] = powerspec 2  supports D0 D3  current D0
                                 cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
                                 cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)
                              em7@pci0:4:0:0: class=0x020000 card=0x00008086 chip=0x109a8086 rev=0x00 hdr=0x00
                                 cap 01[c8] = powerspec 2  supports D0 D3  current D0
                                 cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
                                 cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)
                              em8@pci0:3:0:0: class=0x020000 card=0x00008086 chip=0x109a8086 rev=0x00 hdr=0x00
                                 cap 01[c8] = powerspec 2  supports D0 D3  current D0
                                 cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
                                 cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)
                              em9@pci0:2:0:0: class=0x020000 card=0x00008086 chip=0x109a8086 rev=0x00 hdr=0x00
                                 cap 01[c8] = powerspec 2  supports D0 D3  current D0
                                 cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
                                 cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)

                              Stephen:
                              I managed to upload superiotool to /tmp/ but don't know how to run it :(

                              Ditto flashrom!

                              Eamon

                              1 Reply Last reply Reply Quote 0
                              • E
                                Eams
                                last edited by

                                Another experimental probe..

                                $ sysctl hw
                                hw.machine: i386
                                hw.model: Intel(R) Core(TM)2 Quad CPU    Q9400  @ 2.66GHz
                                hw.ncpu: 4
                                hw.byteorder: 1234
                                hw.physmem: 2120441856
                                hw.usermem: 2066382848
                                hw.pagesize: 4096
                                hw.floatingpoint: 1
                                hw.machine_arch: i386
                                hw.realmem: 2137784320
                                hw.amr.force_sg32: 0
                                hw.an.an_cache_iponly: 1
                                hw.an.an_cache_mcastonly: 0
                                hw.an.an_cache_mode: dbm
                                hw.an.an_dump: off
                                hw.ata.setmax: 0
                                hw.ata.wc: 1
                                hw.ata.atapi_dma: 1
                                hw.ata.ata_dma_check_80pin: 1
                                hw.ata.ata_dma: 1
                                hw.ath.bstuck: 4
                                hw.ath.txbuf: 200
                                hw.ath.rxbuf: 40
                                hw.ath.resetcal: 1200
                                hw.ath.shortcal: 100
                                hw.ath.longcal: 30
                                hw.ath.hal.swba_backoff: 0
                                hw.ath.hal.sw_brt: 10
                                hw.ath.hal.dma_brt: 2
                                hw.bce.msi_enable: 1
                                hw.bce.tso_enable: 1
                                hw.bge.allow_asf: 0
                                hw.bt848.slow_msp_audio: -1
                                hw.bt848.format: -1
                                hw.bt848.reverse_mute: -1
                                hw.bt848.tuner: -1
                                hw.bt848.card: -1
                                hw.bwn.wme: 1
                                hw.bwn.usedma: 1
                                hw.bwn.hwpctl: 0
                                hw.bwn.bluetooth: 1
                                hw.bwn.bfp: 0
                                hw.cardbus.cis_debug: 0
                                hw.cardbus.debug: 0
                                hw.cxgb.snd_queue_len: 128
                                hw.cxgb.use_16k_clusters: -1
                                hw.cxgb.force_fw_update: 0
                                hw.cxgb.multiq: 1
                                hw.cxgb.ofld_disable: 0
                                hw.cxgb.msi_allowed: 2
                                hw.cxgb.tx_reclaim_threshold: 32
                                hw.cxgb.tx_coalesce_enable_stop: 256
                                hw.cxgb.tx_coalesce_enable_start: 512
                                hw.cxgb.tx_coalesce_force: 0
                                hw.cxgb.txq_mr_size: 1024
                                hw.em.eee_setting: 0
                                hw.em.rx_process_limit: 100
                                hw.em.enable_msix: 1
                                hw.em.sbp: 0
                                hw.em.smart_pwr_down: 0
                                hw.em.txd: 1024
                                hw.em.rxd: 1024
                                hw.em.rx_abs_int_delay: 66
                                hw.em.tx_abs_int_delay: 66
                                hw.em.rx_int_delay: 0
                                hw.em.tx_int_delay: 66
                                hw.igb.rx_process_limit: 100
                                hw.igb.num_queues: 0
                                hw.igb.header_split: 0
                                hw.igb.max_interrupt_rate: 8000
                                hw.igb.enable_msix: 1
                                hw.igb.enable_aim: 1
                                hw.igb.txd: 1024
                                hw.igb.rxd: 1024
                                hw.firewire.hold_count: 0
                                hw.firewire.try_bmr: 1
                                hw.firewire.fwmem.speed: 2
                                hw.firewire.fwmem.eui64_lo: 0
                                hw.firewire.fwmem.eui64_hi: 0
                                hw.firewire.phydma_enable: 1
                                hw.firewire.nocyclemaster: 0
                                hw.firewire.fwe.rx_queue_len: 128
                                hw.firewire.fwe.tx_speed: 2
                                hw.firewire.fwe.stream_ch: 1
                                hw.firewire.sbp.tags: 0
                                hw.firewire.sbp.use_doorbell: 0
                                hw.firewire.sbp.scan_delay: 500
                                hw.firewire.sbp.login_delay: 1000
                                hw.firewire.sbp.exclusive_login: 1
                                hw.firewire.sbp.max_speed: -1
                                hw.firewire.sbp.auto_login: 1
                                hw.hifn.maxbatch: 1
                                hw.hifn.debug: 0
                                hw.malo.txbuf: 256
                                hw.malo.rxquota: 256
                                hw.malo.rxbuf: 256
                                hw.malo.txcoalesce: 8
                                hw.malo.pci.msi_disable: 0
                                hw.mfi.max_cmds: 128
                                hw.mfi.event_class: 0
                                hw.mfi.event_locale: 65535
                                hw.mwl.rxdmalow: 3
                                hw.mwl.rxquota: 640
                                hw.mwl.txcoalesce: 8
                                hw.mwl.txbuf: 256
                                hw.mwl.rxbuf: 640
                                hw.mwl.rxdesc: 256
                                hw.pccard.cis_debug: 0
                                hw.pccard.debug: 0
                                hw.cbb.debug: 0
                                hw.cbb.start_32_io: 4096
                                hw.cbb.start_16_io: 256
                                hw.cbb.start_memory: 2281701376
                                hw.pcic.pd6722_vsense: 1
                                hw.pcic.intr_mask: 57016
                                hw.pci.usb_early_takeover: 1
                                hw.pci.honor_msi_blacklist: 1
                                hw.pci.enable_msix: 1
                                hw.pci.enable_msi: 1
                                hw.pci.do_power_resume: 1
                                hw.pci.do_power_nodriver: 0
                                hw.pci.enable_io_modes: 1
                                hw.pci.default_vgapci_unit: -1
                                hw.pci.host_mem_start: 2147483648
                                hw.pci.mcfg: 1
                                hw.pci.irq_override_mask: 57080
                                hw.safe.rngmaxalarm: 8
                                hw.safe.rngbufsize: 16
                                hw.safe.rnginterval: 1
                                hw.syscons.kbd_debug: 1
                                hw.syscons.kbd_reboot: 0
                                hw.syscons.bell: 1
                                hw.syscons.saver.keybonly: 1
                                hw.syscons.sc_no_suspend_vtswitch: 0
                                hw.usb.no_boot_wait: 0
                                hw.usb.debug: 0
                                hw.usb.usb_lang_mask: 255
                                hw.usb.usb_lang_id: 9
                                hw.usb.template: 0
                                hw.usb.power_timeout: 30
                                hw.usb.uath.regdomain: 0
                                hw.usb.uath.countrycode: 0
                                hw.usb.urtw.preamble_mode: 2
                                hw.usb.urtw.debug: 0
                                hw.usb.ucom.cons_baud: 9600
                                hw.usb.ucom.cons_unit: -1
                                hw.wi.debug: 0
                                hw.wi.txerate: 0
                                hw.intr_storm_threshold: 1000
                                hw.pagesizes: 4096 0
                                hw.availpages: 517686
                                hw.bus.devctl_queue: 1000
                                hw.bus.devctl_disable: 0
                                hw.kbd.keymap_restrict_change: 0
                                hw.nve_pollinterval: 0
                                hw.busdma.total_bpages: 128
                                hw.busdma.zone0.total_bpages: 128
                                hw.busdma.zone0.free_bpages: 128
                                hw.busdma.zone0.reserved_bpages: 0
                                hw.busdma.zone0.active_bpages: 0
                                hw.busdma.zone0.total_bounced: 0
                                hw.busdma.zone0.total_deferred: 0
                                hw.busdma.zone0.lowaddr: 0xffffffff
                                hw.busdma.zone0.alignment: 4096
                                hw.clockrate: 2660
                                hw.via_feature_xcrypt: 0
                                hw.via_feature_rng: 0
                                hw.instruction_sse: 1
                                hw.apic.enable_extint: 0
                                hw.mca.erratum383: 0
                                hw.mca.amd10h_L1TP: 1
                                hw.mca.enabled: 1
                                hw.mca.count: 0
                                hw.mca.interval: 3600
                                hw.mca.force_scan: 0
                                hw.acpi.supported_sleep_state: S1 S4 S5
                                hw.acpi.power_button_state: S5
                                hw.acpi.sleep_button_state: S1
                                hw.acpi.lid_switch_state: NONE
                                hw.acpi.standby_state: S1
                                hw.acpi.suspend_state: NONE
                                hw.acpi.sleep_delay: 1
                                hw.acpi.s4bios: 0
                                hw.acpi.verbose: 0
                                hw.acpi.disable_on_reboot: 0
                                hw.acpi.handle_reboot: 0
                                hw.acpi.reset_video: 0
                                hw.acpi.cpu.cx_lowest: C1

                                Eamon

                                1 Reply Last reply Reply Quote 0
                                • E
                                  Eams
                                  last edited by

                                  Another..

                                  $ sysctl dev.cpu
                                  dev.cpu.0.%desc: ACPI CPU
                                  dev.cpu.0.%driver: cpu
                                  dev.cpu.0.%location: handle=_PR_.P001
                                  dev.cpu.0.%pnpinfo: _HID=none UID=0
                                  dev.cpu.0.%parent: acpi0
                                  dev.cpu.0.cx_supported: C1/0
                                  dev.cpu.0.cx_lowest: C1
                                  dev.cpu.0.cx_usage: 100.00% last 5000us
                                  dev.cpu.0.freq: 330
                                  dev.cpu.0.freq_levels: 2646/-1 2315/-1 1984/-1 1653/-1 1323/-1 992/-1 661/-1 330/-1
                                  dev.cpu.1.%desc: ACPI CPU
                                  dev.cpu.1.%driver: cpu
                                  dev.cpu.1.%location: handle=_PR                                  .P002
                                  dev.cpu.1.%pnpinfo: _HID=none UID=0
                                  dev.cpu.1.%parent: acpi0
                                  dev.cpu.1.cx_supported: C1/0
                                  dev.cpu.1.cx_lowest: C1
                                  dev.cpu.1.cx_usage: 100.00% last 5000us
                                  dev.cpu.2.%desc: ACPI CPU
                                  dev.cpu.2.%driver: cpu
                                  dev.cpu.2.%location: handle=_PR                                  .P003
                                  dev.cpu.2.%pnpinfo: _HID=none UID=0
                                  dev.cpu.2.%parent: acpi0
                                  dev.cpu.2.cx_supported: C1/0
                                  dev.cpu.2.cx_lowest: C1
                                  dev.cpu.2.cx_usage: 100.00% last 5000us
                                  dev.cpu.3.%desc: ACPI CPU
                                  dev.cpu.3.%driver: cpu
                                  dev.cpu.3.%location: handle=_PR                                  .P004
                                  dev.cpu.3.%pnpinfo: _HID=none _UID=0
                                  dev.cpu.3.%parent: acpi0
                                  dev.cpu.3.cx_supported: C1/0
                                  dev.cpu.3.cx_lowest: C1
                                  dev.cpu.3.cx_usage: 100.00% last 5000us

                                  Eamon

                                  1 Reply Last reply Reply Quote 0
                                  • stephenw10S
                                    stephenw10 Netgate Administrator
                                    last edited by

                                    To use either of those tools you have to install the FreeBSD package properly, so:

                                    As you are running NanoBD first remount the filesystem read-write

                                    [2.0.3-RELEASE][root@pfsense.fire.box]/root(1): /etc/rc.conf_mount_rw

                                    Then add the package. You have to specify the complete path beacsue FreeBSD 8.1 is now quite old

                                    [2.0.3-RELEASE][root@pfsense.fire.box]/root(2): pkg_add -r ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/ports/i386/packages-8.1-release/Latest/superiotool.tbz
Fetching ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/ports/i386/packages-8.1-release/Latest/superiotool.tbz... Done.

                                    same for flashrom

                                    [2.0.3-RELEASE][root@pfsense.fire.box]/root(3): pkg_add -r ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/ports/i386/packages-8.1-release/Latest/flashrom.tbz
Fetching ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/ports/i386/packages-8.1-release/Latest/flashrom.tbz... Done.
Fetching ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/ports/i386/packages-8.1-release/All/libpci-3.1.7_1.tbz... Done.

                                    Then remount the filesystem read-only again

                                    [2.0.3-RELEASE][root@pfsense.fire.box]/root(4): /etc/rc.conf_mount_ro

                                    Finally issue a rehash to re-index the new files so FreeBSD knows where to find them

                                    [2.0.3-RELEASE][root@pfsense.fire.box]/root(5): rehash

                                    Now you run the tools.  :)

                                    After you install the lcdproc-dev package via the pfSense GUI you have to configure the various parameters before it will run and then start the service manually the first time in Status: Services:

                                    Steve

                                    1 Reply Last reply Reply Quote 0
                                    • F
                                      fmertz
                                      last edited by

                                      @Eams:

                                      isab0@pci0:0:31:0: class=0x060100 card=0x29148086 chip=0x29148086 rev=0x02 hdr=0x00

                                      Yep, confirmed ICH9D0. Dom 0, bus 0, device 31, function 0 is the L(ow)P(in)C(ount) device. We can use it to identify the exact ICH model number.

                                      1 Reply Last reply Reply Quote 0
                                      • E
                                        Eams
                                        last edited by

                                        I had lcdproc loaded - removed and installed lcdproc-dev - selected WatchGuard Firebox with SDEC (x86only) - see attached pics.

                                        Looks like powerd is doing it's job running the cpu at 330Mhz - fans however haven't slowed down any though :(

                                        Superiotool probe..:
                                        $ superiotool -d
                                        superiotool r
                                        Found ITE IT8718F (id=0x8718, rev=0x4) at 0x2e
                                        Register dump:
                                        idx 20 21 22 23 24 2b
                                        val 87 18 04 10 00 00
                                        def 87 18 01 00 00 00
                                        LDN 0x00 (Floppy)
                                        idx 30 60 61 70 74 f0 f1
                                        val 00 00 00 00 04 00 00
                                        def 00 03 f0 06 02 00 00
                                        LDN 0x01 (COM1)
                                        idx 30 60 61 70 f0 f1 f2 f3
                                        val 00 03 f8 04 00 50 00 7f
                                        def 00 03 f8 04 00 50 00 7f
                                        LDN 0x02 (COM2)
                                        idx 30 60 61 70 f0 f1 f2 f3
                                        val 01 02 f8 03 00 50 00 7f
                                        def 00 02 f8 03 00 50 00 7f
                                        LDN 0x03 (Parallel port)
                                        idx 30 60 61 62 63 70 74 f0
                                        val 01 03 78 00 00 07 04 08
                                        def 00 03 78 07 78 07 03 03
                                        LDN 0x04 (Environment controller)
                                        idx 30 60 61 62 63 70 f0 f1  f2 f3 f4 f5 f6
                                        val 01 0a 10 0a 00 00 80 00  00 00 a0 00 ff
                                        def 00 02 90 02 30 09 00 00  00 00 00 NA NA
                                        LDN 0x05 (Keyboard)
                                        idx 30 60 61 62 63 70 71 f0
                                        val 01 00 60 00 64 01 02 00
                                        def 01 00 60 00 64 01 02 00
                                        LDN 0x06 (Mouse)
                                        idx 30 70 71 f0
                                        val 01 0c 02 00
                                        def 00 0c 02 00
                                        LDN 0x07 (GPIO)
                                        idx 25 26 27 28 29 2a 2c 60  61 62 63 64 65 70 71 72  73 74 b0 b1 b2 b3 b4 b5  b8 b9 ba bb bc bd c0 c1  c2 c3 c4 c5 c8 c9 ca cb  cc e0 e1 e2 e3 e4 e5 e6  e7 f0 f1 f2 f3 f4 f5 f6  f7 f8 f9 fa fb fc fd fe  ff
                                        val 41 d3 00 00 00 20 1f 00  00 0a 20 0a 30 00 00 00  00 00 00 00 00 00 00 00  40 00 00 00 00 00 40 d3  00 40 00 00 40 d0 00 40  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  00 00 00 00 00 bc 00 00  00
                                        def 01 00 00 40 00 00 00 00  00 00 00 00 00 00 00 20  38 00 00 00 00 00 00 00  00 00 00 00 00 00 01 00  00 40 00 00 01 00 00 40  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  00 00 00 00 00 NA 00 00  00
                                        LDN 0x0a (Consumer IR)
                                        idx 30 60 61 70 f0
                                        val 00 00 00 00 06
                                        def 00 03 10 0b 00

                                        Hope that is of some use ;D

                                        Haven't managed to get flashrom to run  ???

                                        Eamon

                                        IMG_20130517_004538.jpg
                                        IMG_20130517_004538.jpg_thumb
                                        IMG_20130517_005003.jpg
                                        IMG_20130517_005003.jpg_thumb

                                        1 Reply Last reply Reply Quote 0
                                        • F
                                          fmertz
                                          last edited by

                                          @Eams:

                                          Selected WatchGuard Firebox with SDEC (x86only) - see attached pics.

                                          That was an easy win. Good to see, though. Have you tried the buttons? Best guess, they sort of work, but are not mapped correctly…

                                          1 Reply Last reply Reply Quote 0
                                          • stephenw10S
                                            stephenw10 Netgate Administrator
                                            last edited by

                                            What happens when you try to run flashrom?

                                            Steve

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post