I open the ports 21 , 3389 and any other port but it show me that they are close why?
-
@jahonix modem fibre
-
@viragomann how can I reconfigure the router to forward incoming packets to pfSense now instead of the server directly,
because before I reconfigure the router to forward incoming packet to the server windows 2012 by its ip adresse 192.168.1.10 and by the port 3389 but when I set up the pfsense , the ip adress of server 2012 become 10.0.0.10 and I change only the adresse of the server de 192.168.1.10 to 10.0.0.10 but it still the problem of cloesing, so what can do, I change the adress to 10.0.0.1 the adress lan of pfsense or what?
-
@nihad123 said in I open the ports 21 , 3389 and any other port but it show me that they are close why?:
@jahonix modem fibre
Are you sure its running in modem mode ?
What is the make and model ?
-
@nogbadthebad said in I open the ports 21 , 3389 and any other port but it show me that they are close why?:
I’m guessing there is a WAN router further upstream from your pfSense router.
I have router-----pfsense----windows_servers2012
-
@nogbadthebad yes pfsense en modem mode because all machine after pfsense have ip adresse from the adressage plage of dhcp that i define to lan pfsense, I want say that machine after pfsense has 10.0.0.15 10.0.018 ... and it connect to the internet
-
You have to forward incoming access to pfSense WAN address (192.168.1.44) now, of course if the router isn't in modem / bridge mode.
If pfSense does all the filtering now, you can forward all incoming traffic to it. Some routers have a DMZ option for that, others call it "Exposed host".
-
@viragomann I changed anything on my router so I think that it is inin modem mode , so I will forward incoming access to pfsense wand adress 192.168.1.44, and after that what I will do on nat and rules pfesense?
-
Yes. But I don't think your router is in modem mode.
-
What exactly is the make and model of the upstream device?
What is the connection into it, ADSL, Ethernet, ... ?
Do you have access to this device to change its config ?
The issue here is the device between the Internet and your pfSense box.
-
@nihad123 said in I open the ports 21 , 3389 and any other port but it show me that they are close why?:
I think that it is inin modem mode , so I will forward incoming access to pfsense wand adress 192.168.1.44
If your isp device was in "modem" mode then pfsense wan would be a public IP - not a rfc1918 address.
-
@nogbadthebad modem fibre optique yes i have access o the modem and i can make any changes on yes I know, so what can I do? I Give it ip adresse public to wan of pfsense or what? and if I give the ip public to wan pfsense I don't know any adress gatway upstream should give to interface wan pfsense
-
Maybe google the modem make, model and pfSense and see if anyone has managed to get it working.
You then need to set up pfSense to probally connect to the modem via PPPOE.
People keep trying to help you here and your not answering the questions.
-
@johnpoz and if I give the ip public to wan pfsense I don’t know any adress gatway upstream should give to interface wan pfsense, and how can I know if my divice between internet and pfsense is in modem mode
-
@nogbadthebad the modem connect via pppoe and have an address ip public unique and I find "dmz host " so what's ip that i will fill in? I fill the ip adress of pfsense wan, 192.168.1.44 or what exacteley?
-
if your isp device allows for dmz host, then sure you can put pfsense wan IP as that.. Then any traffic that hits your public IP should be sent to pfsense - then your pfsense forwards would work.
But I would HIGHLY suggest against opening up rdp to the public internet. If employees need to get into the work network while they are home on the road, then they should VPN in. Then they can access what they need securely.
-
@nihad123 said in I open the ports 21 , 3389 and any other port but it show me that they are close why?:
@nogbadthebad the modem connect via pppoe and have an address ip public unique and I find "dmz host " so what's ip that i will fill in? I fill the ip adress of pfsense wan, 192.168.1.44 or what exacteley?
Try setting the device into modem mode and configuring the pfSense WAN interface like this:-
Don't enable IPv6
-
@viragomann I have the dmz hoste so what I will fill in? the ip adress of pfsense wan? 192.168.1.44?
the model of my dvice is F660
-
Yes, the address of pfSense WAN interface. Already mentioned that here.
-
@nogbadthebad I make the same password that I put when I want login to my PPPoE? or I choose an password?
-
@nihad123 said in I open the ports 21 , 3389 and any other port but it show me that they are close why?:
F660
My screenshots are for if you've set the router device to modem mode with PPOE.
Same user ID & password as on the F660.
