(SOLVED) Can't have access to Google's 172.217.0.0 addresses

johnpoz

And what is this 192.168.100? You stated your pfsense lan is 192.168.1

torisevt

@johnpoz
Fingers type before I think.
We have 192.168.100.0 network at the site.

johnpoz

Ok...So pfsense is 192.168.100.1

What does the routing table look like on pfsense? Do a traceroute from pfsense for that 172 IP.

torisevt

@johnpoz
Traceroute
1 * * *
2 62.78.124.34 9.949 ms 11.144 ms 9.942 ms
3 62.78.107.148 18.192 ms 9.792 ms 9.891 ms
4 62.78.107.202 14.443 ms 10.692 ms 9.342 ms
5 * * *
6 62.78.107.194 17.179 ms 13.994 ms 16.244 ms
7 62.78.104.85 28.543 ms
62.78.108.37 137.688 ms 14.744 ms
8 * 72.14.211.94 13.255 ms *
9 * 108.170.254.49 18.219 ms *
10 209.85.246.26 17.006 ms
72.14.236.4 17.444 ms
108.170.232.35 14.894 ms
11 172.217.20.37 18.042 ms
108.170.232.35 22.542 ms
172.217.20.37 15.499 ms

ip4 routes.png

Gertjan

For me

Microsoft Windows [version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Tous droits réservés.

C:\Users\Réception-Gauche>ping 172.217.21.164

Envoi d'une requête 'Ping'  172.217.21.164 avec 32 octets de données :
Réponse de 172.217.21.164 : octets=32 temps=57 ms TTL=45
Réponse de 172.217.21.164 : octets=32 temps=57 ms TTL=45
Réponse de 172.217.21.164 : octets=32 temps=56 ms TTL=45
Réponse de 172.217.21.164 : octets=32 temps=56 ms TTL=45

Statistiques Ping pour 172.217.21.164:
    Paquets : envoyés = 4, reçus = 4, perdus = 0 (perte 0%),
Durée approximative des boucles en millisecondes :
    Minimum = 56ms, Maximum = 57ms, Moyenne = 56ms

"Your mileage may vary ...."

All this means that "172.217.21.164" want to reply to me (my WAN IP).
Not a big issue if ICMP won't come back.

torisevt

@Gertjan
Me too but not on the other site

U:\>ping 172.217.21.164

Ping-isäntä: 172.217.21.164 32 tavua tietoja:
Vastaus isännältä 172.217.21.164: tavuja=32 aika=7 ms TTL=57
Vastaus isännältä 172.217.21.164: tavuja=32 aika=7 ms TTL=57
Vastaus isännältä 172.217.21.164: tavuja=32 aika=7 ms TTL=57
Vastaus isännältä 172.217.21.164: tavuja=32 aika=7 ms TTL=57

Ping-tilastot 172.217.21.164:
    Paketit: Lähetetty = 4, Vastaanotettu = 4, Kadonnut = 0
             (0% hävikki),
Arvioitu kiertoaika millisekunteina:
    Pienin = 7 ms, Suurin = 7 ms, Keskiarvo = 7 ms

johnpoz

@torisevt said in Can't have access to Google's 172.217.0.0 addresses:

7 62.78.104.85 28.543 ms
62.78.108.37 137.688 ms 14.744 ms

That trace looks odd, are you getting back multiple IPs on the same hop?

From your trace looks like your problem is upstream of pfsense.. To prove this too yourself - just sniff on wan of pfsense when you ping that IP... Do you see pfsense send the ping request with its public IP as source.. If you do not get an answer that is on your isp or upstream..

Gertjan

So, here a ping to "172.217.21.164" replies :
@torisevt said in Can't have access to Google's 172.217.0.0 addresses:

U:>ping 172.217.21.164

Ping-isäntä: 172.217.21.164 32 tavua tietoja:
Vastaus isännältä 172.217.21.164: tavuja=32 aika=7 ms TTL=57

Here it doesn't :

@torisevt said in Can't have access to Google's 172.217.0.0 addresses:
Ping-isäntä: www.google.com [172.217.21.164] 32 tavua tietoja:
Pyyntö aikakatkaistiin. (Time out)

Is that the question : it doesn't work all the times ?

torisevt

@Gertjan
It doesn't work when Google change it's sites IP addresses to 172.217.0.0 net

johnpoz

He has 2 sites.. Only 1 site is unable to ping that netblock.

Gertjan

The site with no result (no ICMP returned) uses an upstream router with differnet settings ?
Another ISP ?

Also : "Google" uses firewalls. When some networks (read : ISP clients) ping to much, it would not surprises me that Google throttles ICMP a bit for that network. It's just a free service ;)

torisevt

There is a cable modem connected to pfsense that is connected to LAN switch.
No another ISP, unless IPsec VPN between sites?

Gertjan

@torisevt said in Can't have access to Google's 172.217.0.0 addresses:

unless IPsec VPN between sites?

Ah !! Even more factors to check !!
You've got more such details ?

torisevt

@Gertjan
I don't know all the things the previous guy has established.

johnpoz

whats the network settings on the ipsec - are you sending that netblock over the ipsec?

torisevt

@johnpoz
Where can I find it?

johnpoz

in the vpn, ipsec section - what is setup on the phase 2? This will have tunnel networks and remote networks and local networks defined.

torisevt

@johnpoz
ipsec tunnels.png ipsec phase2.png

johnpoz

well there is your problem a 172/8 - that is not correct for damn sure ;)

torisevt

@johnpoz
We use 172.18.., 172.19.. on the other site