Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Install pfSense on Stormshield SN300

    Scheduled Pinned Locked Moved Hardware
    34 Posts 2 Posters 7.0k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • stephenw10S
      stephenw10 Netgate Administrator
      last edited by

      When I installed the U250S I installed pfSense on a different machine and than moved the drive back into it.
      I could not make it boot from USB there either it appears to be locked in the BIOS.

      Yes, all the switch config is done via the internal serial connection. I tried again yesterday out of curiosity and although the switch is able to get an IP and connect on the correct VLAN it does not respond to ssh/telnet/http(s).
      I believe the Stormshield/Netasq OS is FreeBSD based and they upstreamed code for the etherswitch framework but sadlu not for this switch for whatever reason.
      E.g. https://github.com/pfsense/FreeBSD-src/commit/63843c9be40aba2fb7e803960fb7d4fcee1d3eeb#diff-2c6515420922ed8e8d8f0cf43c645431

      Steve

      1 Reply Last reply Reply Quote 0
      • F
        FaceOfHorroOds
        last edited by 

        When I installed the U250S I installed pfSense on a different machine and than moved the drive back into it.

        I already did and I just did it again.

        I connected the 2 GB SSD to a SATA to USB adapter

        alt text

        I start on Pfsense with my Zalman VE300, select the 2GB SSD with partition in MBR, access commands and and I execute the command poweroff

        I put the SSD back in the Stormshield, I start it, I have the Stormshield logo, then a black screen with the blinking cursor _

        I have nothing via the console port.

        I use the file : pfSense-CE-2.4.5-RELEASE-p1-amd64.iso

        1 Reply Last reply Reply Quote 0
        • stephenw10S
          stephenw10 Netgate Administrator
          last edited by

          I installed in another device with a serial console using the serial memstick image.
          But if you install on something from ISO you would have to first enable the serial console before you swap the SATA module back.

          Steve

          1 Reply Last reply Reply Quote 0
          • F
            FaceOfHorroOds
            last edited by

            Here's a return,

            I managed to install pfsense 2.4.5 x64 last night.

            The problem probably came from start-up mode (Legacy / UEFI).

            On the PC, I forced the start of the installation of pfsense in legacy.

            Pfsense has also started and I did a little configuration in cu -l cuau1 -s 19200

            SN300:/>port conf

Port Configuration:
===================


Port  State     Mode         Flow Control  MaxFrame  Power     Excessive  Link
----  --------  -----------  ------------  --------  --------  ---------  ----
1     Enabled   Auto         Enabled       9600      Disabled  Discard    1Gfdx
2     Enabled   Auto         Enabled       9600      Disabled  Discard    Down
3     Enabled   Auto         Enabled       9600      Disabled  Discard    Down
4     Enabled   Auto         Enabled       9600      Disabled  Discard    Down
5     Enabled   Auto         Enabled       9600      Disabled  Discard    Down
6     Enabled   Auto         Enabled       9600      Disabled  Discard    Down
7     Enabled   Auto         Enabled       9600      Disabled  Discard    Down
8     Enabled   Auto         Enabled       9600      Disabled  Discard    Down
9     Enabled   1Gfdx        Disabled      9600      Disabled  Discard    1Gfdx

            SN300:/>vlan config

VLAN Configuration:
===================

Port  PVID  Frame Type  Ingress Filter  Tx Tag      Port Type
----  ----  ----------  --------------  ----------  -------------
1     1     Untagged    Disabled        Untag PVID  Unaware
2     1     Untagged    Disabled        Untag PVID  Unaware
3     1     Untagged    Disabled        Untag PVID  Unaware
4     1     Untagged    Disabled        Untag PVID  Unaware
5     1     Untagged    Disabled        Untag PVID  Unaware
6     1     Untagged    Disabled        Untag PVID  Unaware
7     1     Untagged    Disabled        Untag PVID  Unaware
8     1     Untagged    Disabled        Untag PVID  Unaware
9     1     Untagged    Disabled        Untag PVID  C-Port

VID   VLAN Name                         Ports
----  --------------------------------  -----
1     default                           1-9

VID   VLAN Name                         Ports
----  --------------------------------  -----
VLAN forbidden table is empty

            [2.4.5-RELEASE][admin@pfsense-SN300A.home]/root: ifconfig -vma
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC>
        capabilities=15399b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,NETMAP>
        ether 00:0d:b4:11:6c:5c
        hwaddr 00:0d:b4:11:6c:5c
        inet6 fe80::20d:b4ff:fe11:6c5c%em0 prefixlen 64 scopeid 0x1
        inet 192.168.1.254 netmask 0xffffff00 broadcast 192.168.1.255
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
        supported media:
                media autoselect
                media 1000baseT
                media 1000baseT mediaopt full-duplex
                media 100baseTX mediaopt full-duplex
                media 100baseTX
                media 10baseT/UTP mediaopt full-duplex
                media 10baseT/UTP
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        capabilities=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        groups: lo
enc0: flags=0<> metric 0 mtu 1536
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        groups: enc
pfsync0: flags=0<> metric 0 mtu 1500
        groups: pfsync
pflog0: flags=100<PROMISC> metric 0 mtu 33160
        groups: pflog
            1 Reply Last reply Reply Quote 0
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              With that config you should be able to connect to pfSense in the one address it has. All 9 ports are in vlan1, it's configured like an unmanaged switch.

              But you probably want to configure at least 2 VLANs so you van have, for example, WAN on port1 and LAN on ports 2-8.

              Or you could have 8 VLANs with each port configured separately.

              Steve

              1 Reply Last reply Reply Quote 0
              • F
                FaceOfHorroOds
                last edited by

                I'm back !

                I successfully installed the image "pfSense-CE-memstick-2.4.3-RELEASE-amd64.img" with rufus on storage and still have a network port detected

                1 Reply Last reply Reply Quote 0
                • F
                  FaceOfHorroOds
                  last edited by

                  I put back the version "pfSense-CE-memstick-2.4.5-RELEASE-p1-amd64.img" however the command "~~" does not work to exit the serial port

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    The escape command is ~~.

                    To escape just the local console session it would be ~. but you are in a session inside that.

                    You really need to be on the current version.

                    Steve

                    1 Reply Last reply Reply Quote 0
                    • F
                      FaceOfHorroOds
                      last edited by

                      I already tried and it doesn't work

                      [2.4.5-RELEASE][admin@pfsense-SN300A.home]/root: cu -l cuau1 -s 19200
Stale lock on cuau1 PID=80957... overriding.
Connected

General Commands:
-----------------
Help/?: Get help on a group or a specific command
Up    : Move one command level up
Logout: Exit CLI

Command Groups:
---------------
System      : System settings and reset options
IP          : IP configuration and Ping
Port        : Port management
MAC         : MAC address table
VLAN        : Virtual LAN
PVLAN       : Private VLAN
Security    : Security management
STP         : Spanning Tree Protocol
Aggr        : Link Aggregation
LACP        : Link Aggregation Control Protocol
LLDP        : Link Layer Discovery Protocol
EEE         : Energy Efficient Ethernet
QoS         : Quality of Service
Mirror      : Port mirroring
Config      : Load/Save of configuration via TFTP
Firmware    : Download of firmware via TFTP
Loop Protect: Loop Protection
IPMC        : MLD/IGMP Snooping
Debug       : Switch debug facilities

Type '<group>' to enter command group, e.g. 'port'.
Type '<group> ?' to get list of group commands, e.g. 'port ?'.
Type '<command> ?' to get help on a command, e.g. 'port mode ?'.
Commands may be abbreviated, e.g. 'por co' instead of 'port configuration'.
>~~.
Invalid command
>~~
Invalid command
>~.
Invalid command
                      1 Reply Last reply Reply Quote 0
                      • F
                        FaceOfHorroOds
                        last edited by FaceOfHorroOds

                        I said nothing, in copy / paste it works with ~.

                        >~.
Invalid command
>~
[EOT]
[2.4.5-RELEASE][admin@pfsense-SN300A.home]/root: ~.
                        1 Reply Last reply Reply Quote 0
                        • stephenw10S
                          stephenw10 Netgate Administrator
                          last edited by

                          Hmm, weird. I will say the terminal only looks for escape characters immediately following a return. I usually hit return a couple of time before ending it to be sure.

                          Steve

                          1 Reply Last reply Reply Quote 0
                          • F
                            FaceOfHorroOds
                            last edited by

                            I tried to show all interfaces of the SN300 to Pfsense via the cu -l cuau1 -s 19200 and nothing helps.

                            Am I doing it right?

                            pfSense - Serial: 1530B00379 - Netgate Device ID: 06645fdd1d35deecde91

*** Welcome to pfSense 2.4.5-RELEASE-p1 (amd64) on pfsense-SN300A ***

 WAN (wan)       -> em0        -> v4/DHCP4: 192.168.1.66/24
                                  v6/DHCP6: 2a01:cb19:8f84:c700:20d:b4ff:fe11:6c5c/64

 0) Logout (SSH only)                  9) pfTop
 1) Assign Interfaces                 10) Filter Logs
 2) Set interface(s) IP address       11) Restart webConfigurator
 3) Reset webConfigurator password    12) PHP shell + pfSense tools
 4) Reset to factory defaults         13) Update from console
 5) Reboot system                     14) Disable Secure Shell (sshd)
 6) Halt system                       15) Restore recent configuration
 7) Ping host                         16) Restart PHP-FPM
 8) Shell

Enter an option: 8

                            [2.4.5-RELEASE][admin@pfsense-SN300A.home]/root: cu -l cuau1 -s 19200
Connected

                            I have enabled all ports and it is connected to my network through port 1

                            >port configuration

Port Configuration:
===================


Port  State     Mode         Flow Control  MaxFrame  Power     Excessive  Link
----  --------  -----------  ------------  --------  --------  ---------  ----
1     Enabled   Auto         Disabled      9600      Disabled  Discard    1Gfdx
2     Enabled   Auto         Disabled      9600      Disabled  Discard    Down
3     Enabled   Auto         Disabled      9600      Disabled  Discard    Down
4     Enabled   Auto         Disabled      9600      Disabled  Discard    Down
5     Enabled   Auto         Disabled      9600      Disabled  Discard    Down
6     Enabled   Auto         Disabled      9600      Disabled  Discard    Down
7     Enabled   Auto         Disabled      9600      Disabled  Discard    Down
8     Enabled   Auto         Disabled      9600      Disabled  Discard    Down
9     Enabled   Auto         Disabled      9600      Disabled  Discard    1Gfdx

                            For the test, I created one VLAN per interface

                            VLAN>config

VLAN Configuration:
===================


Port  PVID  Frame Type  Ingress Filter  Tx Tag      Port Type
----  ----  ----------  --------------  ----------  -------------
1     1     Untagged    Disabled        Untag PVID  S-Port
2     2     Untagged    Disabled        Untag PVID  S-Port
3     3     Untagged    Disabled        Untag PVID  S-Port
4     4     Untagged    Disabled        Untag PVID  S-Port
5     5     Untagged    Disabled        Untag PVID  S-Port
6     6     Untagged    Disabled        Untag PVID  S-Port
7     7     Untagged    Disabled        Untag PVID  S-Port
8     8     Untagged    Disabled        Untag PVID  S-Port
9     1     Untagged    Disabled        Untag PVID  S-Port

VID   VLAN Name                         Ports
----  --------------------------------  -----
1     port1                             1-9
2     port2                             2
3     port3                             3
4     port4                             4
5     port5                             5
6     port6                             6
7     port7                             7
8     port8                             8

                            He only sees me as a network interface, even after a full reboot

                            1 Reply Last reply Reply Quote 0
                            • stephenw10S
                              stephenw10 Netgate Administrator
                              last edited by stephenw10

                              Did you add the VLANs in pfSense on the internal interface?

                              Never use VLAN 1.

                              Here's how I have mine:

                              >vlan config

VLAN Configuration:
===================


Port  PVID  Frame Type  Ingress Filter  Tx Tag      Port Type      
----  ----  ----------  --------------  ----------  -------------  
1     101   Untagged    Disabled        Untag All   S-Port         
2     102   Untagged    Disabled        Untag All   S-Port         
3     103   Untagged    Disabled        Untag All   S-Port         
4     103   Untagged    Disabled        Untag All   S-Port         
5     104   Untagged    Disabled        Untag All   S-Port         
6     104   Untagged    Disabled        Untag All   S-Port         
7     104   Untagged    Disabled        Untag All   S-Port         
8     104   Untagged    Disabled        Untag All   S-Port         
9     104   Untagged    Disabled        Untag All   S-Port         
10    104   Untagged    Disabled        Untag All   S-Port         
11    105   Untagged    Disabled        Untag All   S-Port         
12    105   Untagged    Disabled        Untag All   S-Port         
13    None  Tagged      Disabled        Tag All     C-Port         
14    None  Tagged      Disabled        Tag All     C-Port         

VID   VLAN Name                         Ports
----  --------------------------------  -----
101   WAN1                              1,13,14
102   WAN2                              2,13,14
103   LAN1                              3,4,13,14
104   LAN2                              5-10,13,14
105   WIFI1                             11-14

VID   VLAN Name                         Ports
----  --------------------------------  -----
VLAN forbidden table is empty

                              Though now I'm looking at it 'Untag PVID' would probably be better there. Hmm, been a long while since I configured that....

                              Ports 13 and 14 are the internal ports in the u250s. I have them as an LACP lagg.

                              Steve

                              1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator
                                last edited by

                                Ok reviewing the untag all doesn't matter since it only untags member VLANs. In my case I don't have any mixed tagged/untagged ports so I could either.

                                You need to have port 9 a member of all the VLANs so it carries them tagged to pfSense.

                                The frame type needs to be 'all' since that port is carrying tagged and untagged traffic.

                                At least port 9 should be set to c-port or unaware so it tags for vlans.

                                Steve

                                1 Reply Last reply Reply Quote 0
                                • F
                                  FaceOfHorroOds
                                  last edited by

                                  I only have vlan 1 put on the em0 interface in WAN

                                  On the internal interface? em0?

                                  Internal ports? what does it correspond to?

                                  I have port 9, I tried to put port 9 in "Frame Type : Tagged" and I lost control in ssh.

                                  I didn't understand what "S-Port" and "C-Port" were

                                  1 Reply Last reply Reply Quote 0
                                  • stephenw10S
                                    stephenw10 Netgate Administrator
                                    last edited by

                                    Yes em0 is the internal port, it's connected to port 9 on the switch.

                                    It's frame type has to be 'all' because it's carrying tagged and untagged traffic in your setup.

                                    Then you need to create the vlan interfaces in pfSense on em0.
                                    So em0.2 em0.3 etc.

                                    Steve

                                    1 Reply Last reply Reply Quote 0
                                    • F
                                      FaceOfHorroOds
                                      last edited by

                                      I just reviewed my configuration based on what I planned

                                      VLAN>conf

VLAN Configuration:
===================


Port  PVID  Frame Type  Ingress Filter  Tx Tag      Port Type
----  ----  ----------  --------------  ----------  -------------
1     None  Tagged      Disabled        Tag All     S-Port
2     None  Tagged      Disabled        Tag All     S-Port
3     100   Untagged    Disabled        Untag PVID  S-Port
4     100   Untagged    Disabled        Untag PVID  S-Port
5     100   Untagged    Disabled        Untag PVID  S-Port
6     101   Untagged    Disabled        Untag PVID  S-Port
7     None  Tagged      Disabled        Tag All     C-Port
8     None  Tagged      Disabled        Tag All     C-Port
9     None  Tagged      Disabled        Tag All     C-Port

VID   VLAN Name                         Ports
----  --------------------------------  -----
1                                       1-9
100   LAN                               3-5,7-9
101   DMZ                               6-9
832   OrangeDataVoIP                    1,2,9
840   OrangeTV                          1,2,9

VID   VLAN Name                         Ports
----  --------------------------------  -----
VLAN forbidden table is empty

                                      I just reviewed my configuration according to what I planned

                                      I have :

                                      • ports 1 and 2 in VLAN 832 and 840 for the WAN (in trunk)

                                      Port 1 is the operator WAN
                                      port 2 is a LAN to the operator router WAN

                                      • ports 3 to 5 are the LAN - port 6 is for a DMZ (for a server)
                                      • ports 7 and 8 are for a LACP with my manageable switch in trunk

                                      On pfsense, I created VLAN 100, 101, 832 and 840 on em0 and I put em0.100 in WAN port and I connected my local network to one of the LAN ports (vlan 100)

                                      1 Reply Last reply Reply Quote 0
                                      • stephenw10S
                                        stephenw10 Netgate Administrator
                                        last edited by stephenw10

                                        Ports 1 and 2 will need to be a C-port or Unaware.

                                        I think S-port is wrong for anything we are doing but on an untagged port it doesn't matter:
                                        https://www.etherwan.com/support/faq/ethernet-switches/what-defines-vlan-trunk-modes-unaware-c-port-s-port-and-s-custom-port
                                        That's probably based on the same switch chip family.

                                        That looks correct for LAN. Are you able to connect to pfSense on ports 3, 4 or 5?

                                        Steve

                                        1 Reply Last reply Reply Quote 0
                                        • F
                                          FaceOfHorroOds
                                          last edited by

                                          I switched ports 1 and 2 to C-port

                                          VLAN>conf

VLAN Configuration:
===================


Port  PVID  Frame Type  Ingress Filter  Tx Tag      Port Type
----  ----  ----------  --------------  ----------  -------------
1     None  Tagged      Disabled        Tag All     C-Port
2     None  Tagged      Disabled        Tag All     C-Port
3     100   Untagged    Disabled        Untag PVID  S-Port
4     100   Untagged    Disabled        Untag PVID  S-Port
5     100   Untagged    Disabled        Untag PVID  S-Port
6     101   Untagged    Disabled        Untag PVID  S-Port
7     None  Tagged      Disabled        Tag All     C-Port
8     None  Tagged      Disabled        Tag All     C-Port
9     None  Tagged      Disabled        Tag All     C-Port

VID   VLAN Name                         Ports
----  --------------------------------  -----
1                                       1-9
100   LAN                               3-5,7-9
101   DMZ                               6-9
832   OrangeDataVoIP                    1,2,9
840   OrangeTV                          1,2,9

VID   VLAN Name                         Ports
----  --------------------------------  -----

                                          I put the em0.100 (LAN) interface in WAN port and I connected my local network to one of the LAN ports (port 3)

                                          To explain what I want to do.

                                          The operator network will arrive on port 1 with VLAN 832 (options 60, 77, 90, 125 must be sent by the DHCP client to obtain an IP) and 840 for television.

                                          On port 2, I send the vlan 832 (with option 90, 119, 120, 125 by DHCP server) and 840 on the WAN port on the operator router.

                                          I retrieve the LAN from the operator router (by disabling the DHCP server to use the pfsense DHCP server) to send it to the pfsense LAN ports (on the Stormshield SN300).

                                          I created a network for myself a DMZ.

                                          There will be NAT on port 1

                                          1 Reply Last reply Reply Quote 0
                                          • stephenw10S
                                            stephenw10 Netgate Administrator
                                            last edited by

                                            Hmm, OK. Seems complex! I would start simple first.

                                            You were able to connect over VLAN100 to pfSense?

                                            Steve

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.