Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    VLAN and Static Mapping

    DHCP and DNS
    2
    2
    432
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • P
      pfsensekeith
      last edited by

      I am a noob at this.

      I would like to have static addresses on my vLan.  Is that possible.  In my research all I could find was some guy who posted this:  "I obviously can't put a static mapping for the 192.168.70.0 subnet as it differs from the DHCP configured subnet of 192.168.1.0 and the GUI won't let me."  I was wondering if that is true.

      My setup
      LAN  192.168.4.1/24
      vLan 192.168.50.1/24
      dhcp is enabled for each.
      rules are setup and the vlan is working fine handing out DHCP addresses.

      in moving my wifi clients from the LAN to the vLan(DMZ) I have discovered that I cannot give static IP addresses to them on the vLan.  I would like to do this so I can set access rules that differ amongst the different clients.

      1 Reply Last reply Reply Quote 0
      • DerelictD
        Derelict LAYER 8 Netgate
        last edited by

        What does VLAN mean to you? What did you do?

        Chattanooga, Tennessee, USA
        A comprehensive network diagram is worth 10,000 words and 15 conference calls.
        DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
        Do Not Chat For Help! NO_WAN_EGRESS(TM)

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.