pfsense 2.4.4 - em3 interface disapeared after upgrade



  • Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 4 LAN MB. It's sound strange, but no em3 after upgrade.


  • Rebel Alliance Developer Netgate

    What shows in the output of pciconf -lvb? And the contents of /var/log/dmesg.boot.



  • pciconf -lvb:

    hostb0@pci0:0:0:0:	class=0x060000 card=0x0f318086 chip=0x0f008086 rev=0x0e hdr=0x00
        vendor     = 'Intel Corporation'
        device     = 'Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register'
        class      = bridge
        subclass   = HOST-PCI
    vgapci0@pci0:0:2:0:	class=0x030000 card=0x0f318086 chip=0x0f318086 rev=0x0e hdr=0x00
        vendor     = 'Intel Corporation'
        device     = 'Atom Processor Z36xxx/Z37xxx Series Graphics & Display'
        class      = display
        subclass   = VGA
        bar   [10] = type Memory, range 32, base 0xd0000000, size 4194304, enabled
        bar   [18] = type Prefetchable Memory, range 32, base 0xc0000000, size 268435456, enabled
        bar   [20] = type I/O Port, range 32, base 0xf080, size 8, enabled
    ahci0@pci0:0:19:0:	class=0x010601 card=0x0f238086 chip=0x0f238086 rev=0x0e hdr=0x00
        vendor     = 'Intel Corporation'
        device     = 'Atom Processor E3800 Series SATA AHCI Controller'
        class      = mass storage
        subclass   = SATA
        bar   [10] = type I/O Port, range 32, base 0xf070, size 8, enabled
        bar   [14] = type I/O Port, range 32, base 0xf060, size 4, enabled
        bar   [18] = type I/O Port, range 32, base 0xf050, size 8, enabled
        bar   [1c] = type I/O Port, range 32, base 0xf040, size 4, enabled
        bar   [20] = type I/O Port, range 32, base 0xf020, size 32, enabled
        bar   [24] = type Memory, range 32, base 0xd0a02000, size 2048, enabled
    none0@pci0:0:26:0:	class=0x108000 card=0x0f188086 chip=0x0f188086 rev=0x0e hdr=0x00
        vendor     = 'Intel Corporation'
        device     = 'Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine'
        class      = encrypt/decrypt
        bar   [10] = type Memory, range 32, base 0xd0500000, size 1048576, enabled
        bar   [14] = type Memory, range 32, base 0xd0400000, size 1048576, enabled
    pcib1@pci0:0:28:0:	class=0x060400 card=0x0f488086 chip=0x0f488086 rev=0x0e hdr=0x01
        vendor     = 'Intel Corporation'
        device     = 'Atom Processor E3800 Series PCI Express Root Port 1'
        class      = bridge
        subclass   = PCI-PCI
    pcib2@pci0:0:28:1:	class=0x060400 card=0x0f4a8086 chip=0x0f4a8086 rev=0x0e hdr=0x01
        vendor     = 'Intel Corporation'
        device     = 'Atom Processor E3800 Series PCI Express Root Port 2'
        class      = bridge
        subclass   = PCI-PCI
    pcib3@pci0:0:28:2:	class=0x060400 card=0x0f4c8086 chip=0x0f4c8086 rev=0x0e hdr=0x01
        vendor     = 'Intel Corporation'
        device     = 'Atom Processor E3800 Series PCI Express Root Port 3'
        class      = bridge
        subclass   = PCI-PCI
    pcib4@pci0:0:28:3:	class=0x060400 card=0x0f4e8086 chip=0x0f4e8086 rev=0x0e hdr=0x01
        vendor     = 'Intel Corporation'
        device     = 'Atom Processor E3800 Series PCI Express Root Port 4'
        class      = bridge
        subclass   = PCI-PCI
    ehci0@pci0:0:29:0:	class=0x0c0320 card=0x0f348086 chip=0x0f348086 rev=0x0e hdr=0x00
        vendor     = 'Intel Corporation'
        device     = 'Atom Processor Z36xxx/Z37xxx Series USB EHCI'
        class      = serial bus
        subclass   = USB
        bar   [10] = type Memory, range 32, base 0xd0a01000, size 1024, enabled
    isab0@pci0:0:31:0:	class=0x060100 card=0x0f1c8086 chip=0x0f1c8086 rev=0x0e hdr=0x00
        vendor     = 'Intel Corporation'
        device     = 'Atom Processor Z36xxx/Z37xxx Series Power Control Unit'
        class      = bridge
        subclass   = PCI-ISA
    none1@pci0:0:31:3:	class=0x0c0500 card=0x0f128086 chip=0x0f128086 rev=0x0e hdr=0x00
        vendor     = 'Intel Corporation'
        device     = 'Atom Processor E3800 Series SMBus Controller'
        class      = serial bus
        subclass   = SMBus
        bar   [10] = type Memory, range 32, base 0xd0a00000, size 32, enabled
        bar   [20] = type I/O Port, range 32, base 0xf000, size 32, enabled
    em0@pci0:1:0:0:	class=0x020000 card=0x00008086 chip=0x150c8086 rev=0x00 hdr=0x00
        vendor     = 'Intel Corporation'
        device     = '82583V Gigabit Network Connection'
        class      = network
        subclass   = ethernet
        bar   [10] = type Memory, range 32, base 0xd0900000, size 131072, enabled
        bar   [18] = type I/O Port, range 32, base 0xe000, size 32, enabled
        bar   [1c] = type Memory, range 32, base 0xd0920000, size 16384, enabled
    em1@pci0:2:0:0:	class=0x020000 card=0x00008086 chip=0x150c8086 rev=0x00 hdr=0x00
        vendor     = 'Intel Corporation'
        device     = '82583V Gigabit Network Connection'
        class      = network
        subclass   = ethernet
        bar   [10] = type Memory, range 32, base 0xd0800000, size 131072, enabled
        bar   [18] = type I/O Port, range 32, base 0xd000, size 32, enabled
        bar   [1c] = type Memory, range 32, base 0xd0820000, size 16384, enabled
    em2@pci0:3:0:0:	class=0x020000 card=0x00008086 chip=0x150c8086 rev=0x00 hdr=0x00
        vendor     = 'Intel Corporation'
        device     = '82583V Gigabit Network Connection'
        class      = network
        subclass   = ethernet
        bar   [10] = type Memory, range 32, base 0xd0700000, size 131072, enabled
        bar   [18] = type I/O Port, range 32, base 0xc000, size 32, enabled
        bar   [1c] = type Memory, range 32, base 0xd0720000, size 16384, enabled
    none2@pci0:4:0:0:	class=0x020000 card=0x00008086 chip=0x150c8086 rev=0x00 hdr=0x00
        vendor     = 'Intel Corporation'
        device     = '82583V Gigabit Network Connection'
        class      = network
        subclass   = ethernet
        bar   [10] = type Memory, range 32, base 0xd0600000, size 131072, disabled
        bar   [18] = type I/O Port, range 32, base 0xb000, size 32, enabled
        bar   [1c] = type Memory, range 32, base 0xd0620000, size 16384, disabled
    

    /var/log/dmesg.boot:

    Copyright (c) 1992-2018 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    	The Regents of the University of California. All rights reserved.
    FreeBSD is a registered trademark of The FreeBSD Foundation.
    FreeBSD 11.2-RELEASE-p3 #17 e6b497fa0a3(RELENG_2_4_4): Thu Sep 20 09:04:45 EDT 2018
        root@buildbot3:/crossbuild/ce-244/obj/amd64/WvDslnYb/crossbuild/ce-244/pfSense/tmp/FreeBSD-src/sys/pfSense amd64
    FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
    VT(efifb): resolution 1280x1024
    info: [drm] Initialized drm 1.1.0 20060810
    CPU: Intel(R) Celeron(R) CPU  J1900  @ 1.99GHz (2000.05-MHz K8-class CPU)
      Origin="GenuineIntel"  Id=0x30678  Family=0x6  Model=0x37  Stepping=8
      Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
      Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND>
      AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
      AMD Features2=0x101<LAHF,Prefetch>
      Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
      VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
      TSC: P-state invariant, performance statistics
    real memory  = 4294967296 (4096 MB)
    avail memory = 3976835072 (3792 MB)
    Event timer "LAPIC" quality 600
    ACPI APIC Table: <ALASKA A M I >
    WARNING: L1 data cache covers less APIC IDs than a core
    0 < 1
    FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
    FreeBSD/SMP: 1 package(s) x 4 core(s)
    Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20171214/tbfadt-748)
    ioapic0 <Version 2.0> irqs 0-86 on motherboard
    SMP: AP CPU #3 Launched!
    SMP: AP CPU #2 Launched!
    SMP: AP CPU #1 Launched!
    Timecounter "TSC" frequency 2000048040 Hz quality 1000
    ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
    ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80680430, 0) error 1
    random: entropy device external interface
    ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
    ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806804e0, 0) error 1
    ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
    ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80680590, 0) error 1
    iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
    iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806a7460, 0) error 1
    iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
    iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff806a7510, 0) error 1
    iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
    iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
    module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff806a75c0, 0) error 1
    wlan: mac acl policy registered
    hn: tranparent VF mode, if_transmit will be used, instead of if_start
    kbd0 at kbdmux0
    netmap: loaded module
    module_register_init: MOD_LOAD (vesa, 0xffffffff81209800, 0) error 19
    random: registering fast source Intel Secure Key RNG
    random: fast provider: "Intel Secure Key RNG"
    nexus0
    cryptosoft0: <software crypto> on motherboard
    padlock0: No ACE support.
    acpi0: <ALASKA A M I > on motherboard
    acpi0: Power Button (fixed)
    unknown: I/O range not supported
    cpu0: <ACPI CPU> on acpi0
    cpu1: <ACPI CPU> on acpi0
    cpu2: <ACPI CPU> on acpi0
    cpu3: <ACPI CPU> on acpi0
    atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
    atrtc0: Warning: Couldn't map I/O.
    atrtc0: registered as a time-of-day clock, resolution 1.000000s
    Event timer "RTC" frequency 32768 Hz quality 0
    hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
    Timecounter "HPET" frequency 14318180 Hz quality 950
    Event timer "HPET" frequency 14318180 Hz quality 450
    Event timer "HPET1" frequency 14318180 Hz quality 440
    Event timer "HPET2" frequency 14318180 Hz quality 440
    attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
    Timecounter "i8254" frequency 1193182 Hz quality 0
    Event timer "i8254" frequency 1193182 Hz quality 100
    Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
    pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
    pcib0: _OSC returned error 0x10
    pci0: <ACPI PCI bus> on pcib0
    vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
    drmn0: <Intel Valleyview (mobile)> on vgapci0
    info: [drm] Memory usable by graphics device = 2048M
    intel_iicbb0 on drmn0
    iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
    iic0: <I2C generic I/O> on iicbus0
    iicbus1: <Philips I2C bus> on intel_gmbus0
    iic1: <I2C generic I/O> on iicbus1
    intel_iicbb1 on drmn0
    iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
    iic2: <I2C generic I/O> on iicbus2
    iicbus3: <Philips I2C bus> on intel_gmbus1
    iic3: <I2C generic I/O> on iicbus3
    intel_iicbb2 on drmn0
    iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
    iic4: <I2C generic I/O> on iicbus4
    iicbus5: <Philips I2C bus> on intel_gmbus2
    iic5: <I2C generic I/O> on iicbus5
    intel_iicbb3 on drmn0
    iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
    iic6: <I2C generic I/O> on iicbus6
    iicbus7: <Philips I2C bus> on intel_gmbus3
    iic7: <I2C generic I/O> on iicbus7
    intel_iicbb4 on drmn0
    iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
    iic8: <I2C generic I/O> on iicbus8
    iicbus9: <Philips I2C bus> on intel_gmbus4
    iic9: <I2C generic I/O> on iicbus9
    intel_iicbb5 on drmn0
    iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
    iic10: <I2C generic I/O> on iicbus10
    iicbus11: <Philips I2C bus> on intel_gmbus5
    iic11: <I2C generic I/O> on iicbus11
    info: [drm] MSI enabled 1 message(s)
    info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    info: [drm] Driver supports precise vblank timestamp query.
    error: [drm:pid0:ironlake_wait_panel_status] *ERROR* Panel status timeout: status 21c89105 control abcd4c05
    drm_iic_dp_aux0 on drmn0
    info: [drm] failed to retrieve link info, disabling eDP
    drm_iic_dp_aux0: detached
    intel_sdvo_ddc_proxy397632 on drmn0
    intel_sdvo_ddc_proxy397632: detached
    drm_iic_dp_aux1 on drmn0
    drmn0: taking over the fictitious range 0xc0000000-0xd0000000
    info: [drm] Connector VGA-1: get mode from tunables:
    info: [drm]   - kern.vt.fb.modes.VGA-1
    info: [drm]   - kern.vt.fb.default_mode
    info: [drm] Connector HDMI-A-1: get mode from tunables:
    info: [drm]   - kern.vt.fb.modes.HDMI-A-1
    info: [drm]   - kern.vt.fb.default_mode
    info: [drm] Connector DP-1: get mode from tunables:
    info: [drm]   - kern.vt.fb.modes.DP-1
    info: [drm]   - kern.vt.fb.default_mode
    info: [drm] Connector HDMI-A-2: get mode from tunables:
    info: [drm]   - kern.vt.fb.modes.HDMI-A-2
    info: [drm]   - kern.vt.fb.default_mode
    info: [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
    00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
    drmn0: warning: HDMI-A-2: EDID block 0 invalid.
    fbd0 on drmn0
    VT: Replacing driver "efifb" with new "fb".
    drmn0: More than 8 outputs detected
    info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
    vgapci0: Boot video device
    ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0a02000-0xd0a027ff irq 19 at device 19.0 on pci0
    ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported
    ahcich0: <AHCI channel> at channel 0 on ahci0
    pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
    pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
    pcib1: [GIANT-LOCKED]
    pci1: <ACPI PCI bus> on pcib1
    em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xe000-0xe01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 16 at device 0.0 on pci1
    em0: Using an MSI interrupt
    em0: Ethernet address: 00:71:21:aa:43:a4
    em0: netmap queues/slots: TX 1/1024, RX 1/1024
    pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
    pcib2: [GIANT-LOCKED]
    pci2: <ACPI PCI bus> on pcib2
    em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xd000-0xd01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 17 at device 0.0 on pci2
    em1: Using an MSI interrupt
    em1: Ethernet address: 00:71:21:aa:43:a5
    em1: netmap queues/slots: TX 1/1024, RX 1/1024
    pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
    pcib3: [GIANT-LOCKED]
    pci3: <ACPI PCI bus> on pcib3
    em2: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xc000-0xc01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 18 at device 0.0 on pci3
    em2: Using an MSI interrupt
    em2: Ethernet address: 00:71:21:aa:43:a6
    em2: netmap queues/slots: TX 1/1024, RX 1/1024
    pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
    pcib4: failed to allocate initial memory window: 0xd0600000-0xd06fffff
    pcib4: [GIANT-LOCKED]
    pci4: <ACPI PCI bus> on pcib4
    em3: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xb000-0xb01f irq 19 at device 0.0 on pci4
    em3: 0x20000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff).
    em3: Unable to allocate bus resource: memory
    em3: Allocation of PCI resources failed
    device_attach: em3 attach returned 6
    ehci0: <Intel BayTrail USB 2.0 controller> mem 0xd0a01000-0xd0a013ff irq 23 at device 29.0 on pci0
    usbus0: EHCI version 1.0
    usbus0 on ehci0
    usbus0: 480Mbps High Speed USB v2.0
    isab0: <PCI-ISA bridge> at device 31.0 on pci0
    isa0: <ISA bus> on isab0
    acpi_button0: <Sleep Button> on acpi0
    orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0
    ppc0: cannot reserve I/O port range
    est0: <Enhanced SpeedStep Frequency Control> on cpu0
    est1: <Enhanced SpeedStep Frequency Control> on cpu1
    est2: <Enhanced SpeedStep Frequency Control> on cpu2
    est3: <Enhanced SpeedStep Frequency Control> on cpu3
    Timecounters tick every 1.000 msec
    ugen0.1: <Intel EHCI root HUB> at usbus0
    uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
    uhub0: 8 ports with 8 removable, self powered
    ugen0.2: <vendor 0x8087 product 0x07e6> at usbus0
    uhub1 on uhub0
    uhub1: <vendor 0x8087 product 0x07e6, class 9/0, rev 2.00/0.14, addr 2> on usbus0
    uhub1: 4 ports with 4 removable, self powered
    ugen0.3: <vendor 0x0bda product 0x8189> at usbus0
    urtw0 on uhub1
    urtw0: <vendor 0x0bda product 0x8189, class 0/0, rev 2.00/2.00, addr 3> on usbus0
    urtw0: rtl8187b rf rtl8225z2 hwrev e
    ugen0.4: <LITEON Technology USB Keyboard> at usbus0
    ukbd0 on uhub1
    ukbd0: <EP1 Interrupt> on usbus0
    kbd1 at ukbd0
    ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
    ada0: <SanDisk SSD i110 32GB i212000> ACS-2 ATA SATA 3.x device
    ada0: Serial Number 1611143330
    ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
    ada0: Command Queueing enabled
    ada0: 30533MB (62533296 512 byte sectors)
    Trying to mount root from ufs:/dev/gptid/b3b3ce75-9d81-11e8-a6f3-007121aa43a4 [rw]...
    random: unblocking device.
    CPU: Intel(R) Celeron(R) CPU  J1900  @ 1.99GHz (2000.05-MHz K8-class CPU)
      Origin="GenuineIntel"  Id=0x30678  Family=0x6  Model=0x37  Stepping=8
      Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
      Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND>
      AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
      AMD Features2=0x101<LAHF,Prefetch>
      Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
      VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
      TSC: P-state invariant, performance statistics
    

  • Rebel Alliance Developer Netgate

    @nrw said in pfsense 2.4.4 - em3 interface disapeared after upgrade:

    em3: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xb000-0xb01f irq 19 at device 0.0 on pci4
    em3: 0x20000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff).
    em3: Unable to allocate bus resource: memory
    em3: Allocation of PCI resources failed
    device_attach: em3 attach returned 6

    There's the problem. It couldn't allocate enough memory to the device.

    What do you have in /boot/loader.conf and /boot/loader.conf.local?

    You could try adding something like this to /boot/loader.conf.local:

    kern.ipc.nmbclusters="1000000"
    kern.ipc.nmbjumbop="524288"
    kern.ipc.nmbjumbo9="524288"
    

    And then reboot.



  • /boot/loader.conf:

    kern.cam.boot_delay=10000
    autoboot_delay="3"
    hw.usb.no_pf="1"
    

    /boot/loader.conf.local:

    i915kms_load="YES"
    drm.i915.enable_unsupported=1
    

    Zero effect after adding to /boot/loader.conf.local and reboot:

    kern.ipc.nmbclusters="1000000"
    kern.ipc.nmbjumbop="524288"
    kern.ipc.nmbjumbo9="524288"
    

    /var/log/dmesg.boot contains:

    em3: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xb000-0xb01f irq 19 at device 0.0 on pci4
    em3: 0x20000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff).
    em3: Unable to allocate bus resource: memory
    em3: Allocation of PCI resources failed
    device_attach: em3 attach returned 6
    

  • Rebel Alliance Developer Netgate

    OK, try adding this to /boot/loader.conf.local and then reboot again:

    hint.agp.0.disabled=1
    


  • nothing changed, same error


  • Rebel Alliance Developer Netgate

    If you could, reboot the box and from the console boot menu choose the option for a verbose boot. That should print additional error detail into the boot log/dmesg that hopefully will point in a more specific direction.

    Somehow it's failing to allocate enough memory to allow that NIC to work. Usually the settings I had you add would help in that regard. It's possible that it's a driver issue in FreeBSD 11.2, you could try booting a FreeBSD 11.2 image to see if it's detected there.

    You might also check for a BIOS update, or see if there are any PCI bus resource options in the BIOS that could be changed.



  • var/log/dmesq.boot with verbose option (part 1):

    Copyright (c) 1992-2018 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    	The Regents of the University of California. All rights reserved.
    FreeBSD is a registered trademark of The FreeBSD Foundation.
    FreeBSD 11.2-RELEASE-p3 #17 e6b497fa0a3(RELENG_2_4_4): Thu Sep 20 09:04:45 EDT 2018
        root@buildbot3:/crossbuild/ce-244/obj/amd64/WvDslnYb/crossbuild/ce-244/pfSense/tmp/FreeBSD-src/sys/pfSense amd64
    FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
    Table 'FACP' at 0xba5a6aa0
    Table 'APIC' at 0xba5a6bb0
    Table 'FPDT' at 0xba5a6c38
    Table 'FIDT' at 0xba5a6c80
    Table 'MCFG' at 0xba5a6d20
    Table 'HPET' at 0xba5a6d60
    Table 'SSDT' at 0xba5a6d98
    Table 'SSDT' at 0xba5a7500
    Table 'SSDT' at 0xba5a7790
    Table 'UEFI' at 0xba5a7910
    Table 'BGRT' at 0xba5a7958
    ACPI: No SRAT table found
    PPIM 0: PA=0xc0000000, VA=0xffffffff83210000, size=0x500000, mode=0x1
    VT(efifb): resolution 1280x1024
    Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff83107000.
    Preloaded boot_entropy_cache "/boot/entropy" at 0xffffffff83108538.
    Preloaded elf obj module "/boot/kernel/i915kms.ko" at 0xffffffff83108590.
    Preloaded elf obj module "/boot/kernel/iicbb.ko" at 0xffffffff83108cb8.
    Preloaded elf obj module "/boot/kernel/iicbus.ko" at 0xffffffff83109260.
    Preloaded elf obj module "/boot/kernel/iic.ko" at 0xffffffff83109808.
    Preloaded elf obj module "/boot/kernel/drm2.ko" at 0xffffffff83109e30.
    info: [drm] Initialized drm 1.1.0 20060810
    Calibrating TSC clock ... TSC clock: 2000049336 Hz
    CPU: Intel(R) Celeron(R) CPU  J1900  @ 1.99GHz (2000.05-MHz K8-class CPU)
      Origin="GenuineIntel"  Id=0x30678  Family=0x6  Model=0x37  Stepping=8
      Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
      Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND>
      AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
      AMD Features2=0x101<LAHF,Prefetch>
      Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
      VT-x: (disabled in BIOS) Basic Features=0xda0400<SMM,INS/OUTS,TRUE>
            Pin-Based Controls=0x7f<ExtINT,NMI,VNMI,PreTmr>
            Primary Processor Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,MONITOR,PAUSE>
            Secondary Processor Controls=0x28ef<APIC,EPT,DT,RDTSCP,VPID,WBINVD,UG,RDRAND,VMFUNC>
            Exit Controls=0xda0400<PAT-LD,EFER-SV,PTMR-SV>
            Entry Controls=0xda0400
            EPT Features=0x6114141<XO,PW4,UC,WB,2M,INVEPT,single,all>
            VPID Features=0xf01<INVVPID,individual,single,all,single-globals>
      TSC: P-state invariant, performance statistics
    DTLB: 4k pages, fully associative, 32 entries
    Data TLB: 4 KB Pages, 4-way set associative, 128 entries
    Instruction TLB: 4 KByte pages, fully associative, 48 entries
    DTLB: 4 KByte/2 MByte pages, 4-way associative, 16 entries
    L2 cache: 1024 kbytes, 16-way associative, 64 bytes/line
    real memory  = 4294967296 (4096 MB)
    Physical memory chunk(s):
    0x0000000000010000 - 0x000000000003afff, 176128 bytes (43 pages)
    0x0000000000040000 - 0x000000000009ffff, 393216 bytes (96 pages)
    0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
    0x0000000003200000 - 0x000000001effffff, 467664896 bytes (114176 pages)
    0x000000001f100000 - 0x000000001fffffff, 15728640 bytes (3840 pages)
    0x0000000020100000 - 0x00000000b22b0fff, 2451247104 bytes (598449 pages)
    0x00000000bac05000 - 0x00000000bac05fff, 4096 bytes (1 pages)
    0x00000000bac48000 - 0x00000000badb7fff, 1507328 bytes (368 pages)
    0x00000000baffa000 - 0x00000000baffffff, 24576 bytes (6 pages)
    0x0000000100000000 - 0x000000013ffe7fff, 1073643520 bytes (262120 pages)
    avail memory = 3976835072 (3792 MB)
    Event timer "LAPIC" quality 600
    LAPIC: ipi_wait() us multiplier 37 (r 5300160 tsc 2000049336)
    ACPI APIC Table: <ALASKA A M I >
    WARNING: L1 data cache covers less APIC IDs than a core
    0 < 1
    Package ID shift: 4
    L2 cache ID shift: 2
    L1 cache ID shift: 1
    Core ID shift: 1
    INTR: Adding local APIC 2 as a target
    INTR: Adding local APIC 4 as a target
    INTR: Adding local APIC 6 as a target
    FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
    FreeBSD/SMP: 1 package(s) x 4 core(s)
    Package HW ID = 0 (0)
    	Core HW ID = 0 (0)
    		CPU0 (BSP): APIC ID: 0 (0)
    	Core HW ID = 1 (0x1)
    		CPU1 (AP): APIC ID: 2 (0x2)
    	Core HW ID = 2 (0x2)
    		CPU2 (AP): APIC ID: 4 (0x4)
    	Core HW ID = 3 (0x3)
    		CPU3 (AP): APIC ID: 6 (0x6)
    APIC: CPU 0 has ACPI ID 1
    APIC: CPU 1 has ACPI ID 2
    APIC: CPU 2 has ACPI ID 3
    APIC: CPU 3 has ACPI ID 4
    Pentium Pro MTRR support enabled
    x86bios:  IVT 0x000000-0x0004ff at 0xfffff80000000000
    x86bios: SSEG 0x03a000-0x03afff at 0xfffffe00ef5d9000
    x86bios: EBDA 0x09d000-0x09ffff at 0xfffff8000009d000
    x86bios:  ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
    ULE: setup cpu 0
    ULE: setup cpu 1
    ULE: setup cpu 2
    ULE: setup cpu 3
    ACPI: RSDP 0x00000000BA5A0000 000024 (v02 ALASKA)
    ACPI: XSDT 0x00000000BA5A0080 00007C (v01 ALASKA A M I    01072009 AMI  00010013)
    ACPI: FACP 0x00000000BA5A6AA0 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
    Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20171214/tbfadt-748)
    ACPI: DSDT 0x00000000BA5A0188 006911 (v02 ALASKA A M I    01072009 INTL 20120913)
    ACPI: FACS 0x00000000BAA9BF80 000040
    ACPI: APIC 0x00000000BA5A6BB0 000084 (v03 ALASKA A M I    01072009 AMI  00010013)
    ACPI: FPDT 0x00000000BA5A6C38 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
    ACPI: FIDT 0x00000000BA5A6C80 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
    ACPI: MCFG 0x00000000BA5A6D20 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
    ACPI: HPET 0x00000000BA5A6D60 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
    ACPI: SSDT 0x00000000BA5A6D98 000763 (v01 PmRef  CpuPm    00003000 INTL 20061109)
    ACPI: SSDT 0x00000000BA5A7500 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20061109)
    ACPI: SSDT 0x00000000BA5A7790 00017A (v01 PmRef  ApTst    00003000 INTL 20061109)
    ACPI: UEFI 0x00000000BA5A7910 000042 (v01 ALASKA A M I    00000000      00000000)
    ACPI: BGRT 0x00000000BA5A7958 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
    MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
    ioapic0: ver 0x20 maxredir 0x56
    ioapic0: Routing external 8259A's -> intpin 0
    lapic0: Routing NMI -> LINT1
    lapic0: LINT1 trigger: edge
    lapic0: LINT1 polarity: high
    lapic2: Routing NMI -> LINT1
    lapic2: LINT1 trigger: edge
    lapic2: LINT1 polarity: high
    lapic4: Routing NMI -> LINT1
    lapic4: LINT1 trigger: edge
    lapic4: LINT1 polarity: high
    lapic6: Routing NMI -> LINT1
    lapic6: LINT1 trigger: edge
    lapic6: LINT1 polarity: high
    MADT: Interrupt override: source 0, irq 2
    ioapic0: Routing IRQ 0 -> intpin 2
    MADT: Interrupt override: source 9, irq 9
    ioapic0: intpin 9 trigger: level
    ioapic0 <Version 2.0> irqs 0-86 on motherboard
    cpu0 BSP:
         ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
      lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
      timer: 0x000100ef therm: 0x00000200 err: 0x000000f0 pmc: 0x00010400
    SMP: AP CPU #3 Launched!
    cpu3 AP:
         ID: 0x06000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
      lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
      timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
    SMP: AP CPU #1 Launched!
    cpu1 AP:
         ID: 0x02000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
      lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
      timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
    SMP: AP CPU #2 Launched!
    cpu2 AP:
         ID: 0x04000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
      lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
      timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
    SMP: passed TSC synchronization test
    Timecounter "TSC" frequency 2000049336 Hz quality 1000
    firmware: 'iwn100fw' version 0: 337572 bytes loaded at 0xffffffff81f5c978
    firmware: 'wpifw' version 153229: 150100 bytes loaded at 0xffffffff826a59c8
    firmware: 'iwn105fw' version 0: 689680 bytes loaded at 0xffffffff81faf0d0
    snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
    feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
    firmware: 'iwn135fw' version 0: 701228 bytes loaded at 0xffffffff82057790
    firmware: 'iwn2000fw' version 0: 695876 bytes loaded at 0xffffffff82102b70
    wlan: <802.11 Link Layer>
    firmware: 'iwn2030fw' version 0: 707392 bytes loaded at 0xffffffff821aca68
    firmware: 'iwn4965fw' version 0: 187972 bytes loaded at 0xffffffff82259658
    firmware: 'iwn5000fw' version 0: 340696 bytes loaded at 0xffffffff82287550
    firmware: 'iwn5150fw' version 0: 337400 bytes loaded at 0xffffffff822da8d8
    firmware: 'iwn6000fw' version 0: 454608 bytes loaded at 0xffffffff8232cf80
    firmware: 'iwn6000g2afw' version 0: 677296 bytes loaded at 0xffffffff8239c000
    firmware: 'iwn6000g2bfw' version 0: 679436 bytes loaded at 0xffffffff82441660
    firmware: 'iwn6050fw' version 0: 469780 bytes loaded at 0xffffffff824e7520
    firmware: 't4fw_cfg' version 0: 4552 bytes loaded at 0xffffffff81c01358
    firmware: 't4fw_cfg_uwire' version 0: 21445 bytes loaded at 0xffffffff81c02520
    firmware: 't4fw' version 0: 553984 bytes loaded at 0xffffffff81c078e5
    firmware: 't5fw_cfg' version 0: 5932 bytes loaded at 0xffffffff81c8ed98
    firmware: 't5fw_cfg_uwire' version 0: 21855 bytes loaded at 0xffffffff81c904c4
    firmware: 't5fw' version 0: 651776 bytes loaded at 0xffffffff81c95a23
    firmware: 'rt2561fw' version 0: 8192 bytes loaded at 0xffffffff82608548
    firmware: 'rt2561sfw' version 0: 8192 bytes loaded at 0xffffffff8260a5f8
    firmware: 'rt2661fw' version 0: 8192 bytes loaded at 0xffffffff8260c6a8
    firmware: 'rsu-rtl8712fw' version 120: 122328 bytes loaded at 0xffffffff8266fb80
    firmware: 'runfw' version 0: 8192 bytes loaded at 0xffffffff8268dd70
    firmware: 'rt2860fw' version 0: 8192 bytes loaded at 0xffffffff8260e758
    firmware: 't6fw_cfg' version 0: 5782 bytes loaded at 0xffffffff81d34cd8
    firmware: 't6fw_cfg_uwire' version 0: 21821 bytes loaded at 0xffffffff81d3636e
    firmware: 't6fw' version 0: 698368 bytes loaded at 0xffffffff81d3b8ab
    firmware: 'ipw_bss' version 130: 209190 bytes loaded at 0xffffffff81deb5f8
    random: entropy device external interface
    firmware: 'ipw_ibss' version 130: 201138 bytes loaded at 0xffffffff81e1e7d0
    firmware: 'mw88W8363fw' version 0: 94940 bytes loaded at 0xffffffff82564720
    firmware: 'mwlboot' version 0: 2280 bytes loaded at 0xffffffff8257b9fc
    firmware: 'mxge_eth_z8e' version 377284: 120629 bytes loaded at 0xffffffff8257c4c0
    firmware: 'mxge_ethp_z8e' version 387604: 121317 bytes loaded at 0xffffffff82599cb0
    firmware: 'rtwn-rtl8192cfwU' version 111: 14818 bytes loaded at 0xffffffff82611518
    firmware: 'rtwn-rtl8192cfwU_B' version 111: 16332 bytes loaded at 0xffffffff82614fb0
    firmware: 'mxge_rss_eth_z8e' version 534724: 151912 bytes loaded at 0xffffffff825b7750
    firmware: 'mxge_rss_ethp_z8e' version 544468: 152837 bytes loaded at 0xffffffff825dc970
    firmware: 'ipw_monitor' version 130: 196458 bytes loaded at 0xffffffff81e4fa38
    firmware: 'iwi_bss' version 300: 191154 bytes loaded at 0xffffffff81e80168
    firmware: 'iwi_ibss' version 300: 185428 bytes loaded at 0xffffffff81eaecd0
    firmware: 'iwi_monitor' version 300: 187836 bytes loaded at 0xffffffff81edc1d8
    firmware: 'iwn1000fw' version 0: 337520 bytes loaded at 0xffffffff81f0a258
    wlan: mac acl policy registered
    hn: tranparent VF mode, if_transmit will be used, instead of if_start
    kbd0 at kbdmux0
    mem: <memory>
    netmap: loaded module
    null: <full device, null device, zero device>
    nfslock: pseudo-device
    crypto: <crypto core>
    module_register_init: MOD_LOAD (vesa, 0xffffffff81209800, 0) error 19
    io: <I/O>
    random: registering fast source Intel Secure Key RNG
    random: fast provider: "Intel Secure Key RNG"
    hpt27xx: RocketRAID 27xx controller driver v1.2.8
    hptnr: R750/DC7280 controller driver v1.1.5
    hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
    nexus0
    random: harvesting attach, 8 bytes (4 bits) from ram0
    cryptosoft0: <software crypto> on motherboard
    crypto: assign cryptosoft0 driver id 0, flags 100663296
    crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
    crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
    random: harvesting attach, 8 bytes (4 bits) from cryptosoft0
    padlock0: No ACE support.
    acpi0: <ALASKA A M I > on motherboard
    ACPI: 4 ACPI AML tables successfully acquired and loaded
    PCIe: Memory Mapped configuration base @ 0xe0000000
    ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
    acpi0: Power Button (fixed)
    acpi0: wakeup code va 0xfffffe00ef5fd000 pa 0x38000
    unknown: I/O range not supported
    random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource0
    random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource1
    cpu0: Processor \134_PR_.CPU0 (ACPI ID 1) -> APIC ID 0
    cpu0: <ACPI CPU> on acpi0
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT 0xFFFFF80004A2C800 0003BC (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT 0xFFFFF80004C4F000 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
    random: harvesting attach, 8 bytes (4 bits) from cpu0
    cpu1: Processor \134_PR_.CPU1 (ACPI ID 2) -> APIC ID 1
    cpu1: <ACPI CPU> on acpi0
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT 0xFFFFF80004C46C00 00015F (v01 PmRef  ApIst    00003000 INTL 20061109)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT 0xFFFFF800049B2900 00008D (v01 PmRef  ApCst    00003000 INTL 20061109)
    random: harvesting attach, 8 bytes (4 bits) from cpu1
    cpu2: Processor \134_PR_.CPU2 (ACPI ID 3) -> APIC ID 2
    cpu2: <ACPI CPU> on acpi0
    random: harvesting attach, 8 bytes (4 bits) from cpu2
    cpu3: Processor \134_PR_.CPU3 (ACPI ID 4) -> APIC ID 3
    cpu3: <ACPI CPU> on acpi0
    random: harvesting attach, 8 bytes (4 bits) from cpu3
    atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
    atrtc0: Warning: Couldn't map I/O.
    atrtc0: registered as a time-of-day clock, resolution 1.000000s
    ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 2 vector 48
    ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 49
    Event timer "RTC" frequency 32768 Hz quality 0
    random: harvesting attach, 8 bytes (4 bits) from atrtc0
    hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
    hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 3 timers, legacy route
    hpet0:  t0: irqs 0x00f00000 (0), 64bit, periodic
    hpet0:  t1: irqs 0x00f00000 (0)
    hpet0:  t2: irqs 0x00f00800 (0)
    Timecounter "HPET" frequency 14318180 Hz quality 950
    ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 4 vector 48
    ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 50
    Event timer "HPET" frequency 14318180 Hz quality 450
    Event timer "HPET1" frequency 14318180 Hz quality 440
    Event timer "HPET2" frequency 14318180 Hz quality 440
    random: harvesting attach, 8 bytes (4 bits) from hpet0
    attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
    Timecounter "i8254" frequency 1193182 Hz quality 0
    ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 6 vector 48
    Event timer "i8254" frequency 1193182 Hz quality 100
    random: harvesting attach, 8 bytes (4 bits) from attimer0
    ACPI timer: 0/10 0/10 0/10 0/10 0/10 0/10 0/10 0/10 0/10 0/10 -> 0
    Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
    random: harvesting attach, 8 bytes (4 bits) from acpi_timer0
    pci_link0:        Index  IRQ  Rtd  Ref  IRQs
      Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
      Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
      After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
    random: harvesting attach, 8 bytes (4 bits) from pci_link0
    pci_link1:        Index  IRQ  Rtd  Ref  IRQs
      Initial Probe       0    5   N     0  3 4 5 6 10 11 12 14 15
      Validation          0    5   N     0  3 4 5 6 10 11 12 14 15
      After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
    random: harvesting attach, 8 bytes (4 bits) from pci_link1
    pci_link2:        Index  IRQ  Rtd  Ref  IRQs
      Initial Probe       0    3   N     0  3 4 5 6 10 11 12 14 15
      Validation          0    3   N     0  3 4 5 6 10 11 12 14 15
      After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
    random: harvesting attach, 8 bytes (4 bits) from pci_link2
    pci_link3:        Index  IRQ  Rtd  Ref  IRQs
      Initial Probe       0   10   N     0  3 4 5 6 10 11 12 14 15
      Validation          0   10   N     0  3 4 5 6 10 11 12 14 15
      After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
    random: harvesting attach, 8 bytes (4 bits) from pci_link3
    pci_link4:        Index  IRQ  Rtd  Ref  IRQs
      Initial Probe       0  255   N     0  3 4 5 6 10 11 12 14 15
      Validation          0  255   N     0  3 4 5 6 10 11 12 14 15
      After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
    random: harvesting attach, 8 bytes (4 bits) from pci_link4
    pci_link5:        Index  IRQ  Rtd  Ref  IRQs
      Initial Probe       0  255   N     0  3 4 5 6 10 11 12 14 15
      Validation          0  255   N     0  3 4 5 6 10 11 12 14 15
      After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
    random: harvesting attach, 8 bytes (4 bits) from pci_link5
    pci_link6:        Index  IRQ  Rtd  Ref  IRQs
      Initial Probe       0  255   N     0  3 4 5 6 10 11 12 14 15
      Validation          0  255   N     0  3 4 5 6 10 11 12 14 15
      After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
    random: harvesting attach, 8 bytes (4 bits) from pci_link6
    pci_link7:        Index  IRQ  Rtd  Ref  IRQs
      Initial Probe       0    4   N     0  3 4 5 6 10 11 12 14 15
      Validation          0    4   N     0  3 4 5 6 10 11 12 14 15
      After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
    random: harvesting attach, 8 bytes (4 bits) from pci_link7
    pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
    pcib0: _OSC returned error 0x10
    pcib0: decoding 5 range 0-0xff
    pcib0: decoding 4 range 0-0x6f
    pcib0: decoding 4 range 0x78-0xcf7
    pcib0: decoding 4 range 0xd00-0xffff
    pcib0: decoding 3 range 0xa0000-0xbffff
    pcib0: decoding 3 range 0xc0000-0xdffff
    pcib0: decoding 3 range 0xe0000-0xfffff
    pcib0: decoding 3 range 0xc0000000-0xd0a02fff
    pci0: <ACPI PCI bus> on pcib0
    pci0: domain=0, physical bus=0
    found->	vendor=0x8086, dev=0x0f00, revid=0x0e
    	domain=0, bus=0, slot=0, func=0
    	class=06-00-00, hdrtype=0x00, mfdev=0
    	cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords)
    	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    found->	vendor=0x8086, dev=0x0f31, revid=0x0e
    	domain=0, bus=0, slot=2, func=0
    	class=03-00-00, hdrtype=0x00, mfdev=0
    	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
    	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    	intpin=a, irq=11
    	powerspec 2  supports D0 D3  current D0
    	MSI supports 1 message
    	map[10]: type Memory, range 32, base 0xd0000000, size 22, enabled
    pcib0: allocated type 3 (0xd0000000-0xd03fffff) for rid 10 of pci0:0:2:0
    	map[18]: type Prefetchable Memory, range 32, base 0xc0000000, size 28, enabled
    pcib0: allocated type 3 (0xc0000000-0xcfffffff) for rid 18 of pci0:0:2:0
    	map[20]: type I/O Port, range 32, base 0xf080, size  3, enabled
    pcib0: allocated type 4 (0xf080-0xf087) for rid 20 of pci0:0:2:0
    pcib0: matched entry for 0.2.INTA
    pcib0: slot 2 INTA hardwired to IRQ 16
    found->	vendor=0x8086, dev=0x0f23, revid=0x0e
    	domain=0, bus=0, slot=19, func=0
    	class=01-06-01, hdrtype=0x00, mfdev=0
    	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
    	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    	intpin=a, irq=10
    	powerspec 3  supports D0 D3  current D0
    	MSI supports 1 message
    	map[10]: type I/O Port, range 32, base 0xf070, size  3, enabled
    pcib0: allocated type 4 (0xf070-0xf077) for rid 10 of pci0:0:19:0
    	map[14]: type I/O Port, range 32, base 0xf060, size  2, enabled
    pcib0: allocated type 4 (0xf060-0xf063) for rid 14 of pci0:0:19:0
    	map[18]: type I/O Port, range 32, base 0xf050, size  3, enabled
    pcib0: allocated type 4 (0xf050-0xf057) for rid 18 of pci0:0:19:0
    	map[1c]: type I/O Port, range 32, base 0xf040, size  2, enabled
    pcib0: allocated type 4 (0xf040-0xf043) for rid 1c of pci0:0:19:0
    	map[20]: type I/O Port, range 32, base 0xf020, size  5, enabled
    pcib0: allocated type 4 (0xf020-0xf03f) for rid 20 of pci0:0:19:0
    	map[24]: type Memory, range 32, base 0xd0a02000, size 11, enabled
    pcib0: allocated type 3 (0xd0a02000-0xd0a027ff) for rid 24 of pci0:0:19:0
    pcib0: matched entry for 0.19.INTA
    pcib0: slot 19 INTA hardwired to IRQ 19
    found->	vendor=0x8086, dev=0x0f18, revid=0x0e
    	domain=0, bus=0, slot=26, func=0
    	class=10-80-00, hdrtype=0x00, mfdev=0
    	cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
    	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    	intpin=a, irq=255
    	powerspec 3  supports D0 D3  current D0
    	MSI supports 1 message
    	map[10]: type Memory, range 32, base 0xd0500000, size 20, memory disabled
    pcib0: allocated type 3 (0xd0500000-0xd05fffff) for rid 10 of pci0:0:26:0
    	map[14]: type Memory, range 32, base 0xd0400000, size 20, enabled
    pcib0: allocated type 3 (0xd0400000-0xd04fffff) for rid 14 of pci0:0:26:0
    found->	vendor=0x8086, dev=0x0f48, revid=0x0e
    	domain=0, bus=0, slot=28, func=0
    	class=06-04-00, hdrtype=0x01, mfdev=1
    	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
    	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    	intpin=a, irq=11
    	powerspec 3  supports D0 D3  current D0
    	MSI supports 1 message
    pcib0: matched entry for 0.28.INTA
    pcib0: slot 28 INTA hardwired to IRQ 16
    	secbus=1, subbus=1
    found->	vendor=0x8086, dev=0x0f4a, revid=0x0e
    	domain=0, bus=0, slot=28, func=1
    	class=06-04-00, hdrtype=0x01, mfdev=1
    	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
    	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    	intpin=b, irq=5
    	powerspec 3  supports D0 D3  current D0
    	MSI supports 1 message
    pcib0: matched entry for 0.28.INTB
    pcib0: slot 28 INTB hardwired to IRQ 17
    	secbus=2, subbus=2
    found->	vendor=0x8086, dev=0x0f4c, revid=0x0e
    	domain=0, bus=0, slot=28, func=2
    	class=06-04-00, hdrtype=0x01, mfdev=1
    	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
    	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    	intpin=c, irq=3
    	powerspec 3  supports D0 D3  current D0
    	MSI supports 1 message
    pcib0: matched entry for 0.28.INTC
    pcib0: slot 28 INTC hardwired to IRQ 18
    	secbus=3, subbus=3
    found->	vendor=0x8086, dev=0x0f4e, revid=0x0e
    	domain=0, bus=0, slot=28, func=3
    	class=06-04-00, hdrtype=0x01, mfdev=1
    	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
    	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    	intpin=d, irq=10
    	powerspec 3  supports D0 D3  current D0
    	MSI supports 1 message
    pcib0: matched entry for 0.28.INTD
    pcib0: slot 28 INTD hardwired to IRQ 19
    	secbus=4, subbus=4
    found->	vendor=0x8086, dev=0x0f34, revid=0x0e
    	domain=0, bus=0, slot=29, func=0
    	class=0c-03-20, hdrtype=0x00, mfdev=0
    	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
    	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    	intpin=a, irq=4
    	powerspec 3  supports D0 D3  current D0
    	map[10]: type Memory, range 32, base 0xd0a01000, size 10, enabled
    pcib0: allocated type 3 (0xd0a01000-0xd0a013ff) for rid 10 of pci0:0:29:0
    pcib0: matched entry for 0.29.INTA
    pcib0: slot 29 INTA hardwired to IRQ 23
    found->	vendor=0x8086, dev=0x0f1c, revid=0x0e
    	domain=0, bus=0, slot=31, func=0
    	class=06-01-00, hdrtype=0x00, mfdev=1
    	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
    	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    found->	vendor=0x8086, dev=0x0f12, revid=0x0e
    	domain=0, bus=0, slot=31, func=3
    	class=0c-05-00, hdrtype=0x00, mfdev=0
    	cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
    	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    	intpin=b, irq=3
    	powerspec 3  supports D0 D3  current D0
    	map[10]: type Memory, range 32, base 0xd0a00000, size  5, enabled
    pcib0: allocated type 3 (0xd0a00000-0xd0a0001f) for rid 10 of pci0:0:31:3
    	map[20]: type I/O Port, range 32, base 0xf000, size  5, enabled
    pcib0: allocated type 4 (0xf000-0xf01f) for rid 20 of pci0:0:31:3
    pcib0: matched entry for 0.31.INTB
    pcib0: slot 31 INTB hardwired to IRQ 18
    random: harvesting attach, 8 bytes (4 bits) from hostb0
    vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
    drmn0: <Intel Valleyview (mobile)> on vgapci0
    info: [drm] Memory usable by graphics device = 2048M
    pcib0: allocated type 3 (0xd0600000-0xd0603fff) for rid 100 of drmn0
    intel_iicbb0 on drmn0
    iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
    iic0: <I2C generic I/O> on iicbus0
    random: harvesting attach, 8 bytes (4 bits) from iic0
    random: harvesting attach, 8 bytes (4 bits) from iicbus0
    random: harvesting attach, 8 bytes (4 bits) from iicbb0
    random: harvesting attach, 8 bytes (4 bits) from intel_iicbb0
    iicbus1: <Philips I2C bus> on intel_gmbus0
    iic1: <I2C generic I/O> on iicbus1
    random: harvesting attach, 8 bytes (4 bits) from iic1
    random: harvesting attach, 8 bytes (4 bits) from iicbus1
    random: harvesting attach, 8 bytes (4 bits) from intel_gmbus0
    intel_iicbb1 on drmn0
    iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
    iic2: <I2C generic I/O> on iicbus2
    random: harvesting attach, 8 bytes (4 bits) from iic2
    random: harvesting attach, 8 bytes (4 bits) from iicbus2
    random: harvesting attach, 8 bytes (4 bits) from iicbb1
    random: harvesting attach, 8 bytes (4 bits) from intel_iicbb1
    iicbus3: <Philips I2C bus> on intel_gmbus1
    iic3: <I2C generic I/O> on iicbus3
    random: harvesting attach, 8 bytes (4 bits) from iic3
    random: harvesting attach, 8 bytes (4 bits) from iicbus3
    random: harvesting attach, 8 bytes (4 bits) from intel_gmbus1
    intel_iicbb2 on drmn0
    iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
    iic4: <I2C generic I/O> on iicbus4
    random: harvesting attach, 8 bytes (4 bits) from iic4
    random: harvesting attach, 8 bytes (4 bits) from iicbus4
    random: harvesting attach, 8 bytes (4 bits) from iicbb2
    random: harvesting attach, 8 bytes (4 bits) from intel_iicbb2
    iicbus5: <Philips I2C bus> on intel_gmbus2
    iic5: <I2C generic I/O> on iicbus5
    random: harvesting attach, 8 bytes (4 bits) from iic5
    random: harvesting attach, 8 bytes (4 bits) from iicbus5
    random: harvesting attach, 8 bytes (4 bits) from intel_gmbus2
    


  • part 2:

    intel_iicbb3 on drmn0
    iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
    iic6: <I2C generic I/O> on iicbus6
    random: harvesting attach, 8 bytes (4 bits) from iic6
    random: harvesting attach, 8 bytes (4 bits) from iicbus6
    random: harvesting attach, 8 bytes (4 bits) from iicbb3
    random: harvesting attach, 8 bytes (4 bits) from intel_iicbb3
    iicbus7: <Philips I2C bus> on intel_gmbus3
    iic7: <I2C generic I/O> on iicbus7
    random: harvesting attach, 8 bytes (4 bits) from iic7
    random: harvesting attach, 8 bytes (4 bits) from iicbus7
    random: harvesting attach, 8 bytes (4 bits) from intel_gmbus3
    intel_iicbb4 on drmn0
    iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
    iic8: <I2C generic I/O> on iicbus8
    random: harvesting attach, 8 bytes (4 bits) from iic8
    random: harvesting attach, 8 bytes (4 bits) from iicbus8
    random: harvesting attach, 8 bytes (4 bits) from iicbb4
    random: harvesting attach, 8 bytes (4 bits) from intel_iicbb4
    iicbus9: <Philips I2C bus> on intel_gmbus4
    iic9: <I2C generic I/O> on iicbus9
    random: harvesting attach, 8 bytes (4 bits) from iic9
    random: harvesting attach, 8 bytes (4 bits) from iicbus9
    random: harvesting attach, 8 bytes (4 bits) from intel_gmbus4
    intel_iicbb5 on drmn0
    iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
    iic10: <I2C generic I/O> on iicbus10
    random: harvesting attach, 8 bytes (4 bits) from iic10
    random: harvesting attach, 8 bytes (4 bits) from iicbus10
    random: harvesting attach, 8 bytes (4 bits) from iicbb5
    random: harvesting attach, 8 bytes (4 bits) from intel_iicbb5
    iicbus11: <Philips I2C bus> on intel_gmbus5
    iic11: <I2C generic I/O> on iicbus11
    random: harvesting attach, 8 bytes (4 bits) from iic11
    random: harvesting attach, 8 bytes (4 bits) from iicbus11
    random: harvesting attach, 8 bytes (4 bits) from intel_gmbus5
    vgapci0: attempting to allocate 1 MSI vectors (1 supported)
    msi: routing MSI IRQ 256 to local APIC 0 vector 51
    vgapci0: using IRQ 256 for MSI
    info: [drm] MSI enabled 1 message(s)
    info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    info: [drm] Driver supports precise vblank timestamp query.
    error: [drm:pid0:ironlake_wait_panel_status] *ERROR* Panel status timeout: status 04c70005 control abcd0005
    drm_iic_dp_aux0 on drmn0
    random: harvesting attach, 8 bytes (4 bits) from drm_iic_dp_aux0
    info: [drm] failed to retrieve link info, disabling eDP
    drm_iic_dp_aux0: detached
    intel_sdvo_ddc_proxy397632 on drmn0
    random: harvesting attach, 8 bytes (4 bits) from intel_sdvo_ddc_proxy397632
    intel_sdvo_ddc_proxy397632: detached
    drm_iic_dp_aux1 on drmn0
    random: harvesting attach, 8 bytes (4 bits) from drm_iic_dp_aux1
    drmn0: taking over the fictitious range 0xc0000000-0xd0000000
    info: [drm] Connector VGA-1: get mode from tunables:
    info: [drm]   - kern.vt.fb.modes.VGA-1
    info: [drm]   - kern.vt.fb.default_mode
    info: [drm] Connector HDMI-A-1: get mode from tunables:
    info: [drm]   - kern.vt.fb.modes.HDMI-A-1
    info: [drm]   - kern.vt.fb.default_mode
    info: [drm] Connector DP-1: get mode from tunables:
    info: [drm]   - kern.vt.fb.modes.DP-1
    info: [drm]   - kern.vt.fb.default_mode
    info: [drm] Connector HDMI-A-2: get mode from tunables:
    info: [drm]   - kern.vt.fb.modes.HDMI-A-2
    info: [drm]   - kern.vt.fb.default_mode
    info: [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
    00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
    drmn0: warning: HDMI-A-2: EDID block 0 invalid.
    fbd0 on drmn0
    VT: Replacing driver "efifb" with new "fb".
    random: harvesting attach, 8 bytes (4 bits) from fbd0
    drmn0: More than 8 outputs detected
    info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
    random: harvesting attach, 8 bytes (4 bits) from drmn0
    vgapci0: Boot video device
    random: harvesting attach, 8 bytes (4 bits) from vgapci0
    ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0a02000-0xd0a027ff irq 19 at device 19.0 on pci0
    ahci0: attempting to allocate 1 MSI vectors (1 supported)
    msi: routing MSI IRQ 257 to local APIC 2 vector 48
    ahci0: using IRQ 257 for MSI
    ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported
    ahci0: Caps: 64bit NCQ ALP AL CLO 3Gbps PMD SSC PSC 32cmd 2ports
    ahci0: Caps2: DESO SADM SDS
    ahcich0: <AHCI channel> at channel 0 on ahci0
    ahcich0: Caps: DSP
    random: harvesting attach, 8 bytes (4 bits) from ahcich0
    ahcich1: not probed (disabled)
    random: harvesting attach, 8 bytes (4 bits) from ahci0
    pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
    pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
    pcib0: allocated type 4 (0xe000-0xefff) for rid 1c of pcib1
    pcib0: allocated type 3 (0xd0900000-0xd09fffff) for rid 20 of pcib1
    pcib1: attempting to allocate 1 MSI vectors (1 supported)
    msi: routing MSI IRQ 258 to local APIC 4 vector 48
    pcib1: using IRQ 258 for MSI
    pcib1: [GIANT-LOCKED]
    pcib1: HotPlug command: 0000 -> 1028
    pcib1:   domain            0
    pcib1:   secondary bus     1
    pcib1:   subordinate bus   1
    pcib1:   I/O decode        0xe000-0xefff
    pcib1:   memory decode     0xd0900000-0xd09fffff
    pci1: <ACPI PCI bus> on pcib1
    pcib1: allocated bus range (1-1) for rid 0 of pci1
    pci1: domain=0, physical bus=1
    found->	vendor=0x8086, dev=0x150c, revid=0x00
    	domain=0, bus=1, slot=0, func=0
    	class=02-00-00, hdrtype=0x00, mfdev=0
    	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
    	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    	intpin=a, irq=11
    	powerspec 2  supports D0 D3  current D0
    	MSI supports 1 message, 64 bit
    	MSI-X supports 7 messages in map 0x1c
    	map[10]: type Memory, range 32, base 0xd0900000, size 17, enabled
    pcib1: allocated memory range (0xd0900000-0xd091ffff) for rid 10 of pci0:1:0:0
    	map[18]: type I/O Port, range 32, base 0xe000, size  5, enabled
    pcib1: allocated I/O port range (0xe000-0xe01f) for rid 18 of pci0:1:0:0
    	map[1c]: type Memory, range 32, base 0xd0920000, size 14, enabled
    pcib1: allocated memory range (0xd0920000-0xd0923fff) for rid 1c of pci0:1:0:0
    pcib1: matched entry for 1.0.INTA
    pcib1: slot 0 INTA hardwired to IRQ 16
    em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xe000-0xe01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 16 at device 0.0 on pci1
    em0: attempting to allocate 1 MSI vectors (1 supported)
    msi: routing MSI IRQ 259 to local APIC 6 vector 49
    em0: using IRQ 259 for MSI
    em0: Using an MSI interrupt
    em0: bpf attached
    em0: Ethernet address: 00:71:21:aa:43:a4
    em0: netmap queues/slots: TX 1/1024, RX 1/1024
    random: harvesting attach, 8 bytes (4 bits) from em0
    random: harvesting attach, 8 bytes (4 bits) from pci1
    random: harvesting attach, 8 bytes (4 bits) from pcib1
    pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
    pcib0: allocated type 4 (0xd000-0xdfff) for rid 1c of pcib2
    pcib0: allocated type 3 (0xd0800000-0xd08fffff) for rid 20 of pcib2
    pcib2: attempting to allocate 1 MSI vectors (1 supported)
    msi: routing MSI IRQ 260 to local APIC 0 vector 52
    pcib2: using IRQ 260 for MSI
    pcib2: [GIANT-LOCKED]
    pcib2: HotPlug command: 0000 -> 1028
    pcib2:   domain            0
    pcib2:   secondary bus     2
    pcib2:   subordinate bus   2
    pcib2:   I/O decode        0xd000-0xdfff
    pcib2:   memory decode     0xd0800000-0xd08fffff
    pci2: <ACPI PCI bus> on pcib2
    pcib2: allocated bus range (2-2) for rid 0 of pci2
    pci2: domain=0, physical bus=2
    found->	vendor=0x8086, dev=0x150c, revid=0x00
    	domain=0, bus=2, slot=0, func=0
    	class=02-00-00, hdrtype=0x00, mfdev=0
    	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
    	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    	intpin=a, irq=5
    	powerspec 2  supports D0 D3  current D0
    	MSI supports 1 message, 64 bit
    	MSI-X supports 7 messages in map 0x1c
    	map[10]: type Memory, range 32, base 0xd0800000, size 17, enabled
    pcib2: allocated memory range (0xd0800000-0xd081ffff) for rid 10 of pci0:2:0:0
    	map[18]: type I/O Port, range 32, base 0xd000, size  5, enabled
    pcib2: allocated I/O port range (0xd000-0xd01f) for rid 18 of pci0:2:0:0
    	map[1c]: type Memory, range 32, base 0xd0820000, size 14, enabled
    pcib2: allocated memory range (0xd0820000-0xd0823fff) for rid 1c of pci0:2:0:0
    pcib2: matched entry for 2.0.INTA
    pcib2: slot 0 INTA hardwired to IRQ 17
    em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xd000-0xd01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 17 at device 0.0 on pci2
    em1: attempting to allocate 1 MSI vectors (1 supported)
    msi: routing MSI IRQ 261 to local APIC 2 vector 49
    em1: using IRQ 261 for MSI
    em1: Using an MSI interrupt
    em1: bpf attached
    em1: Ethernet address: 00:71:21:aa:43:a5
    em1: netmap queues/slots: TX 1/1024, RX 1/1024
    random: harvesting attach, 8 bytes (4 bits) from em1
    random: harvesting attach, 8 bytes (4 bits) from pci2
    random: harvesting attach, 8 bytes (4 bits) from pcib2
    pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
    pcib0: allocated type 4 (0xc000-0xcfff) for rid 1c of pcib3
    pcib0: allocated type 3 (0xd0700000-0xd07fffff) for rid 20 of pcib3
    pcib3: attempting to allocate 1 MSI vectors (1 supported)
    msi: routing MSI IRQ 262 to local APIC 4 vector 49
    pcib3: using IRQ 262 for MSI
    pcib3: [GIANT-LOCKED]
    pcib3: HotPlug command: 0000 -> 1028
    pcib3:   domain            0
    pcib3:   secondary bus     3
    pcib3:   subordinate bus   3
    pcib3:   I/O decode        0xc000-0xcfff
    pcib3:   memory decode     0xd0700000-0xd07fffff
    pci3: <ACPI PCI bus> on pcib3
    pcib3: allocated bus range (3-3) for rid 0 of pci3
    pci3: domain=0, physical bus=3
    found->	vendor=0x8086, dev=0x150c, revid=0x00
    	domain=0, bus=3, slot=0, func=0
    	class=02-00-00, hdrtype=0x00, mfdev=0
    	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
    	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    	intpin=a, irq=3
    	powerspec 2  supports D0 D3  current D0
    	MSI supports 1 message, 64 bit
    	MSI-X supports 7 messages in map 0x1c
    	map[10]: type Memory, range 32, base 0xd0700000, size 17, enabled
    pcib3: allocated memory range (0xd0700000-0xd071ffff) for rid 10 of pci0:3:0:0
    	map[18]: type I/O Port, range 32, base 0xc000, size  5, enabled
    pcib3: allocated I/O port range (0xc000-0xc01f) for rid 18 of pci0:3:0:0
    	map[1c]: type Memory, range 32, base 0xd0720000, size 14, enabled
    pcib3: allocated memory range (0xd0720000-0xd0723fff) for rid 1c of pci0:3:0:0
    pcib3: matched entry for 3.0.INTA
    pcib3: slot 0 INTA hardwired to IRQ 18
    em2: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xc000-0xc01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 18 at device 0.0 on pci3
    em2: attempting to allocate 1 MSI vectors (1 supported)
    msi: routing MSI IRQ 263 to local APIC 6 vector 50
    em2: using IRQ 263 for MSI
    em2: Using an MSI interrupt
    em2: bpf attached
    em2: Ethernet address: 00:71:21:aa:43:a6
    em2: netmap queues/slots: TX 1/1024, RX 1/1024
    random: harvesting attach, 8 bytes (4 bits) from em2
    random: harvesting attach, 8 bytes (4 bits) from pci3
    random: harvesting attach, 8 bytes (4 bits) from pcib3
    pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
    pcib0: allocated type 4 (0xb000-0xbfff) for rid 1c of pcib4
    pcib4: failed to allocate initial memory window: 0xd0600000-0xd06fffff
    pcib4: attempting to allocate 1 MSI vectors (1 supported)
    msi: routing MSI IRQ 264 to local APIC 0 vector 53
    pcib4: using IRQ 264 for MSI
    pcib4: [GIANT-LOCKED]
    pcib4: HotPlug command: 0000 -> 1028
    pcib4:   domain            0
    pcib4:   secondary bus     4
    pcib4:   subordinate bus   4
    pcib4:   I/O decode        0xb000-0xbfff
    pci4: <ACPI PCI bus> on pcib4
    pcib4: allocated bus range (4-4) for rid 0 of pci4
    pci4: domain=0, physical bus=4
    found->	vendor=0x8086, dev=0x150c, revid=0x00
    	domain=0, bus=4, slot=0, func=0
    	class=02-00-00, hdrtype=0x00, mfdev=0
    	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
    	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
    	intpin=a, irq=10
    	powerspec 2  supports D0 D3  current D0
    	MSI supports 1 message, 64 bit
    	MSI-X supports 7 messages in map 0x1c
    	map[10]: type Memory, range 32, base 0xd0600000, size 17, enabled
    pcib4: failed to allocate initial memory window (0xd0600000-0xd061ffff,0x20000)
    pci4: pci0:4:0:0 bar 0x10 failed to allocate
    	map[18]: type I/O Port, range 32, base 0xb000, size  5, enabled
    pcib4: allocated I/O port range (0xb000-0xb01f) for rid 18 of pci0:4:0:0
    	map[1c]: type Memory, range 32, base 0xd0620000, size 14, memory disabled
    pcib4: failed to allocate initial memory window (0xd0620000-0xd0623fff,0x4000)
    pci4: pci0:4:0:0 bar 0x1c failed to allocate
    pcib4: matched entry for 4.0.INTA
    pcib4: slot 0 INTA hardwired to IRQ 19
    em3: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xb000-0xb01f irq 19 at device 0.0 on pci4
    pcib4: failed to allocate initial memory window (0-0xffffffff,0x20000)
    em3: 0x20000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff).
    em3: Unable to allocate bus resource: memory
    em3: Allocation of PCI resources failed
    device_attach: em3 attach returned 6
    random: harvesting attach, 8 bytes (4 bits) from pci4
    random: harvesting attach, 8 bytes (4 bits) from pcib4
    ehci0: <Intel BayTrail USB 2.0 controller> mem 0xd0a01000-0xd0a013ff irq 23 at device 29.0 on pci0
    ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 2 vector 50
    usbus0: EHCI version 1.0
    usbus0 on ehci0
    ehci0: usbpf: Attached
    random: harvesting attach, 8 bytes (4 bits) from usbus0
    usbus0: random: harvesting attach, 8 bytes (4 bits) from ehci0
    480Mbps High Speed USB v2.0
    isab0: <PCI-ISA bridge> at device 31.0 on pci0
    isa0: <ISA bus> on isab0
    random: harvesting attach, 8 bytes (4 bits) from isa0
    random: harvesting attach, 8 bytes (4 bits) from isab0
    pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
    random: harvesting attach, 8 bytes (4 bits) from pci0
    random: harvesting attach, 8 bytes (4 bits) from pcib0
    acpi_button0: <Sleep Button> on acpi0
    random: harvesting attach, 8 bytes (4 bits) from acpi_button0
    ACPI: Enabled 6 GPEs in block 00 to 3F
    random: harvesting attach, 8 bytes (4 bits) from acpi0
    AcpiOsExecute: task queue not started
    random: harvesting attach, 8 bytes (4 bits) from apic0
    random: harvesting attach, 8 bytes (4 bits) from nexus0
    pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
    pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
    pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
    pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
    pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
    pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
    pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
    pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
    pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
    pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
    pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
    pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
    pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
    pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
    pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
    pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
    pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
    pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
    pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
    pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
    pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
    pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
    pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
    pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
    pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
    pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
    pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
    pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
    pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
    pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
    pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
    pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
    pcib0: allocated type 3 (0xc0000-0xc07ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xc0000-0xce7ff) for rid 0 of orm0
    pcib0: allocated type 3 (0xce800-0xcefff) for rid 1 of orm0
    pcib0: allocated type 3 (0xcf000-0xcf7ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xcf800-0xcffff) for rid 1 of orm0
    pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xda000-0xda7ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xda800-0xdafff) for rid 1 of orm0
    pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 1 of orm0
    pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 1 of orm0
    pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xdd800-0xddfff) for rid 1 of orm0
    pcib0: allocated type 3 (0xde000-0xde7ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xde800-0xdefff) for rid 1 of orm0
    pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xdf800-0xdffff) for rid 1 of orm0
    pcib0: allocated type 3 (0xe0000-0xe07ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xe0800-0xe0fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xe1000-0xe17ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xe1800-0xe1fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xe2000-0xe27ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xe2800-0xe2fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xe3000-0xe37ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xe3800-0xe3fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xe4000-0xe47ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xe4800-0xe4fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xe5000-0xe57ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xe5800-0xe5fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xe6000-0xe67ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xe6800-0xe6fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xe7000-0xe77ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xe7800-0xe7fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xe8000-0xe87ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xe8800-0xe8fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xe9000-0xe97ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xe9800-0xe9fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xea000-0xea7ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xea800-0xeafff) for rid 1 of orm0
    pcib0: allocated type 3 (0xeb000-0xeb7ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xeb800-0xebfff) for rid 1 of orm0
    pcib0: allocated type 3 (0xec000-0xec7ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xec800-0xecfff) for rid 1 of orm0
    pcib0: allocated type 3 (0xed000-0xed7ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xed800-0xedfff) for rid 1 of orm0
    pcib0: allocated type 3 (0xee000-0xee7ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xee800-0xeefff) for rid 1 of orm0
    pcib0: allocated type 3 (0xef000-0xef7ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xef800-0xeffff) for rid 1 of orm0
    pcib0: allocated type 3 (0xf0000-0xf07ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xf0800-0xf0fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xf1000-0xf17ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xf1800-0xf1fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xf2000-0xf27ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xf2800-0xf2fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xf3000-0xf37ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xf3800-0xf3fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xf4000-0xf47ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xf4800-0xf4fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xf5000-0xf57ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xf5800-0xf5fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xf6000-0xf67ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xf6800-0xf6fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xf7000-0xf77ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xf7800-0xf7fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xf8000-0xf87ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xf8800-0xf8fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xf9000-0xf97ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xf9800-0xf9fff) for rid 1 of orm0
    pcib0: allocated type 3 (0xfa000-0xfa7ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xfa800-0xfafff) for rid 1 of orm0
    pcib0: allocated type 3 (0xfb000-0xfb7ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xfb800-0xfbfff) for rid 1 of orm0
    pcib0: allocated type 3 (0xfc000-0xfc7ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xfc800-0xfcfff) for rid 1 of orm0
    pcib0: allocated type 3 (0xfd000-0xfd7ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xfd800-0xfdfff) for rid 1 of orm0
    pcib0: allocated type 3 (0xfe000-0xfe7ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xfe800-0xfefff) for rid 1 of orm0
    pcib0: allocated type 3 (0xff000-0xff7ff) for rid 1 of orm0
    pcib0: allocated type 3 (0xff800-0xfffff) for rid 1 of orm0
    ahc_isa_identify 0: ioport 0xc00 alloc failed
    ahc_isa_identify 1: ioport 0x1c00 alloc failed
    ahc_isa_identify 2: ioport 0x2c00 alloc failed
    ahc_isa_identify 3: ioport 0x3c00 alloc failed
    ahc_isa_identify 4: ioport 0x4c00 alloc failed
    ahc_isa_identify 5: ioport 0x5c00 alloc failed
    ahc_isa_identify 6: ioport 0x6c00 alloc failed
    ahc_isa_identify 7: ioport 0x7c00 alloc failed
    ahc_isa_identify 8: ioport 0x8c00 alloc failed
    ahc_isa_identify 9: ioport 0x9c00 alloc failed
    ahc_isa_identify 10: ioport 0xac00 alloc failed
    ahc_isa_identify 11: ioport 0xbc00 alloc failed
    ahc_isa_identify 12: ioport 0xcc00 alloc failed
    ahc_isa_identify 13: ioport 0xdc00 alloc failed
    ahc_isa_identify 14: ioport 0xec00 alloc failed
    isa_probe_children: disabling PnP devices
    atrtc: atrtc0 already exists; skipping it
    attimer: attimer0 already exists; skipping it
    sc: sc0 already exists; skipping it
    isa_probe_children: probing non-PnP devices
    orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0
    random: harvesting attach, 8 bytes (4 bits) from orm0
    sc0 failed to probe on isa0
    vga0 failed to probe on isa0
    pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0
    pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0
    atkbdc0: AT keyboard controller not found
    atkbdc0 failed to probe at port 0x60,0x64 on isa0
    pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
    pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
    fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
    ppc0: cannot reserve I/O port range
    ppc0 failed to probe at irq 7 on isa0
    pcib0: allocated type 4 (0x3f8-0x3f8) for rid 0 of uart0
    uart0 failed to probe at port 0x3f8 irq 4 on isa0
    pcib0: allocated type 4 (0x2f8-0x2f8) for rid 0 of uart1
    uart1 failed to probe at port 0x2f8 irq 3 on isa0
    isa_probe_children: probing PnP devices
    AcpiOsExecute: task queue not started
    random: harvesting attach, 8 bytes (4 bits) from acpi_perf0
    AcpiOsExecute: task queue not started
    random: harvesting attach, 8 bytes (4 bits) from acpi_perf1
    AcpiOsExecute: task queue not started
    random: harvesting attach, 8 bytes (4 bits) from acpi_perf2
    AcpiOsExecute: task queue not started
    random: harvesting attach, 8 bytes (4 bits) from acpi_perf3
    est0: <Enhanced SpeedStep Frequency Control> on cpu0
    random: harvesting attach, 8 bytes (4 bits) from cpufreq0
    random: harvesting attach, 8 bytes (4 bits) from est0
    est1: <Enhanced SpeedStep Frequency Control> on cpu1
    random: harvesting attach, 8 bytes (4 bits) from cpufreq1
    random: harvesting attach, 8 bytes (4 bits) from est1
    est2: <Enhanced SpeedStep Frequency Control> on cpu2
    random: harvesting attach, 8 bytes (4 bits) from cpufreq2
    random: harvesting attach, 8 bytes (4 bits) from est2
    est3: <Enhanced SpeedStep Frequency Control> on cpu3
    random: harvesting attach, 8 bytes (4 bits) from cpufreq3
    random: harvesting attach, 8 bytes (4 bits) from est3
    Device configuration finished.
    procfs registered
    lapic: Divisor 2, Frequency 41667712 Hz
    lapic: deadline tsc mode, Frequency 2000049336 Hz
    Timecounters tick every 1.000 msec
    enc0: bpf attached
    lo0: bpf attached
    vlan: initialized, using hash tables with chaining
    tcp_init: net.inet.tcp.tcbhashsize auto tuned to 32768
    IPsec: Initialized Security Association Processing.
    pfsync0: bpf attached
    pflog0: bpf attached
    AcpiOsExecute: enqueue 5 pending tasks
    hpt27xx: no controller detected.
    hptnr: no controller detected.
    hptrr: no controller detected.
    ahcich0: AHCI reset...
    ahcich0: SATA connect time=100us status=00000123
    ahcich0: AHCI reset: device found
    ahcich0: AHCI reset: device ready after 0ms
    ugen0.1: <Intel EHCI root HUB> at usbus0
    uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
    uhub0: 8 ports with 8 removable, self powered
    random: harvesting attach, 8 bytes (4 bits) from uhub0
    ugen0.2: <vendor 0x8087 product 0x07e6> at usbus0
    uhub1 on uhub0
    uhub1: <vendor 0x8087 product 0x07e6, class 9/0, rev 2.00/0.14, addr 2> on usbus0
    uhub1: 4 ports with 4 removable, self powered
    random: harvesting attach, 8 bytes (4 bits) from uhub1
    ugen0.3: <vendor 0x0bda product 0x8189> at usbus0
    urtw0 on uhub1
    urtw0: <vendor 0x0bda product 0x8189, class 0/0, rev 2.00/2.00, addr 3> on usbus0
    urtw0: rtl8187b rf rtl8225z2 hwrev e
    urtw0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
    urtw0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
    random: harvesting attach, 8 bytes (4 bits) from urtw0
    ugen0.4: <vendor 0x0566 product 0x3107> at usbus0
    ukbd0 on uhub1
    ukbd0: <vendor 0x0566 product 0x3107, class 0/0, rev 1.10/1.00, addr 4> on usbus0
    kbd: new array size 4
    kbd1 at ukbd0
    kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
    random: harvesting attach, 8 bytes (4 bits) from ukbd0
    uhid0 on uhub1
    uhid0: <vendor 0x0566 product 0x3107, class 0/0, rev 1.10/1.00, addr 4> on usbus0
    random: harvesting attach, 8 bytes (4 bits) from uhid0
    pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
    pass0: <SanDisk SSD i110 32GB i212000> ACS-2 ATA SATA 3.x device
    pass0: Serial Number 1611143330
    pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
    pass0: Command Queueing enabled
    ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
    GEOM: new disk ada0
    ada0: <SanDisk SSD i110 32GB i212000> ACS-2 ATA SATA 3.x device
    ada0: Serial Number 1611143330
    ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
    ada0: Command Queueing enabled
    ada0: 30533MB (62533296 512 byte sectors)
    Trying to mount root from ufs:/dev/gptid/b3b3ce75-9d81-11e8-a6f3-007121aa43a4 [rw]...
    atrtc0: providing initial system time
    start_init: trying /sbin/init
    random: unblocking device.
    cpuctl: access to MSR registers/cpuid info.
    CPU: Intel(R) Celeron(R) CPU  J1900  @ 1.99GHz (2000.05-MHz K8-class CPU)
      Origin="GenuineIntel"  Id=0x30678  Family=0x6  Model=0x37  Stepping=8
      Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
      Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND>
      AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
      AMD Features2=0x101<LAHF,Prefetch>
      Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
      VT-x: (disabled in BIOS) Basic Features=0xda0400<SMM,INS/OUTS,TRUE>
            Pin-Based Controls=0x7f<ExtINT,NMI,VNMI,PreTmr>
            Primary Processor Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,MONITOR,PAUSE>
            Secondary Processor Controls=0x28ef<APIC,EPT,DT,RDTSCP,VPID,WBINVD,UG,RDRAND,VMFUNC>
            Exit Controls=0xda0400<PAT-LD,EFER-SV,PTMR-SV>
            Entry Controls=0xda0400
            EPT Features=0x6114141<XO,PW4,UC,WB,2M,INVEPT,single,all>
            VPID Features=0xf01<INVVPID,individual,single,all,single-globals>
      TSC: P-state invariant, performance statistics
    DTLB: 4k pages, fully associative, 32 entries
    Data TLB: 4 KB Pages, 4-way set associative, 128 entries
    Instruction TLB: 4 KByte pages, fully associative, 48 entries
    DTLB: 4 KByte/2 MByte pages, 4-way associative, 16 entries
    L2 cache: 1024 kbytes, 16-way associative, 64 bytes/line
    

  • Rebel Alliance Developer Netgate

    The error messages there all still seem to point toward the same resolutions when searching. The things you've already tried, or something in the BIOS not allocating resources properly.

    You could try disabling MSI-X (hw.em.enable_msix=0 in /boot/loader.conf.local then reboot), but I'd still be on the lookout for a BIOS update or a BIOS option that might be related.



  • When you said "PCI bus resource options", its means something like that?
    0_1538058210134_2018-09-27 17-15-54.JPG


  • Rebel Alliance Developer Netgate

    Yes, like that, but not being familiar with your hardware I can't offer any suggestions there. You may need to try a few changes up or down to see if you can get an improvement. Judging by the device info in pciconf it's on bus 0, so try that first.

    Note what the initial values are and you can always change it back.



  • I tried to play with BIOS option, but my maximum achievement is halt pfsense on boot. Big question: why em3 worked on previous pfsense version? Maybe it not hardware issue?


  • Rebel Alliance Developer Netgate

    There are a number of OS/driver changes in FreeBSD 11.2 (pfSense 2.4.4) vs 11.1 (pfSense 2.4.3). It's entirely possible some driver change had a regression for your specific card. It may also be trying a newer/faster mode that it didn't do before, or support for some other piece of conflicting hardware was added that wasn't actively in use before.



  • 'Reseved Memory'? 'Reseved Memory Alignment'? At least they managed to get it right the third time. First thing I'd check, as Jim already said, was for a BIOS update for that board.


  • Rebel Alliance Developer Netgate

    You might want to look at https://forum.netgate.com/post/792753 -- a poster there suggested using an alternate video console.

    So REMOVE this from /boot/loader.conf.local:

    i915kms_load="YES"
    drm.i915.enable_unsupported=1
    

    And then add this to /boot/loader.conf.local:

    kern.vty=sc
    

    That may have a similar effect to disabling AGP on older hardware, freeing up enough bus resources for the additional NIC to function.



  • "kern.vty=sc" bring back em3, yes!
    But now video stop working after this line:
    masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000

    var/log/dmesq.boot:

    Copyright (c) 1992-2018 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    	The Regents of the University of California. All rights reserved.
    FreeBSD is a registered trademark of The FreeBSD Foundation.
    FreeBSD 11.2-RELEASE-p3 #17 e6b497fa0a3(RELENG_2_4_4): Thu Sep 20 09:04:45 EDT 2018
        root@buildbot3:/crossbuild/ce-244/obj/amd64/WvDslnYb/crossbuild/ce-244/pfSense/tmp/FreeBSD-src/sys/pfSense amd64
    FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
    CPU: Intel(R) Celeron(R) CPU  J1900  @ 1.99GHz (2000.05-MHz K8-class CPU)
      Origin="GenuineIntel"  Id=0x30678  Family=0x6  Model=0x37  Stepping=8
      Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
      Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND>
      AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
      AMD Features2=0x101<LAHF,Prefetch>
      Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
      VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
      TSC: P-state invariant, performance statistics
    real memory  = 4294967296 (4096 MB)
    avail memory = 3979714560 (3795 MB)
    Event timer "LAPIC" quality 600
    ACPI APIC Table: <ALASKA A M I >
    WARNING: L1 data cache covers less APIC IDs than a core
    0 < 1
    FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
    FreeBSD/SMP: 1 package(s) x 4 core(s)
    Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20171214/tbfadt-748)
    ioapic0 <Version 2.0> irqs 0-86 on motherboard
    SMP: AP CPU #3 Launched!
    SMP: AP CPU #1 Launched!
    SMP: AP CPU #2 Launched!
    Timecounter "TSC" frequency 2000049576 Hz quality 1000
    random: entropy device external interface
    wlan: mac acl policy registered
    hn: tranparent VF mode, if_transmit will be used, instead of if_start
    kbd0 at kbdmux0
    netmap: loaded module
    module_register_init: MOD_LOAD (vesa, 0xffffffff81209800, 0) error 19
    random: registering fast source Intel Secure Key RNG
    random: fast provider: "Intel Secure Key RNG"
    nexus0
    cryptosoft0: <software crypto> on motherboard
    padlock0: No ACE support.
    acpi0: <ALASKA A M I > on motherboard
    acpi0: Power Button (fixed)
    unknown: I/O range not supported
    cpu0: <ACPI CPU> on acpi0
    cpu1: <ACPI CPU> on acpi0
    cpu2: <ACPI CPU> on acpi0
    cpu3: <ACPI CPU> on acpi0
    atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
    atrtc0: Warning: Couldn't map I/O.
    atrtc0: registered as a time-of-day clock, resolution 1.000000s
    Event timer "RTC" frequency 32768 Hz quality 0
    hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
    Timecounter "HPET" frequency 14318180 Hz quality 950
    Event timer "HPET" frequency 14318180 Hz quality 450
    Event timer "HPET1" frequency 14318180 Hz quality 440
    Event timer "HPET2" frequency 14318180 Hz quality 440
    attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
    Timecounter "i8254" frequency 1193182 Hz quality 0
    Event timer "i8254" frequency 1193182 Hz quality 100
    Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
    pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
    pcib0: _OSC returned error 0x10
    pci0: <ACPI PCI bus> on pcib0
    vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
    vgapci0: Boot video device
    ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0a02000-0xd0a027ff irq 19 at device 19.0 on pci0
    ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported
    ahcich0: <AHCI channel> at channel 0 on ahci0
    pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
    pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
    pcib1: [GIANT-LOCKED]
    pci1: <ACPI PCI bus> on pcib1
    em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xe000-0xe01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 16 at device 0.0 on pci1
    em0: Using an MSI interrupt
    em0: Ethernet address: 00:71:21:aa:43:a4
    em0: netmap queues/slots: TX 1/1024, RX 1/1024
    pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
    pcib2: [GIANT-LOCKED]
    pci2: <ACPI PCI bus> on pcib2
    em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xd000-0xd01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 17 at device 0.0 on pci2
    em1: Using an MSI interrupt
    em1: Ethernet address: 00:71:21:aa:43:a5
    em1: netmap queues/slots: TX 1/1024, RX 1/1024
    pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
    pcib3: [GIANT-LOCKED]
    pci3: <ACPI PCI bus> on pcib3
    em2: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xc000-0xc01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 18 at device 0.0 on pci3
    em2: Using an MSI interrupt
    em2: Ethernet address: 00:71:21:aa:43:a6
    em2: netmap queues/slots: TX 1/1024, RX 1/1024
    pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
    pcib4: [GIANT-LOCKED]
    pci4: <ACPI PCI bus> on pcib4
    em3: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xb000-0xb01f mem 0xd0600000-0xd061ffff,0xd0620000-0xd0623fff irq 19 at device 0.0 on pci4
    em3: Using an MSI interrupt
    em3: Ethernet address: 00:71:21:aa:43:a7
    em3: netmap queues/slots: TX 1/1024, RX 1/1024
    ehci0: <Intel BayTrail USB 2.0 controller> mem 0xd0a01000-0xd0a013ff irq 23 at device 29.0 on pci0
    usbus0: EHCI version 1.0
    usbus0 on ehci0
    usbus0: 480Mbps High Speed USB v2.0
    isab0: <PCI-ISA bridge> at device 31.0 on pci0
    isa0: <ISA bus> on isab0
    acpi_button0: <Sleep Button> on acpi0
    orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0
    ppc0: cannot reserve I/O port range
    est0: <Enhanced SpeedStep Frequency Control> on cpu0
    est1: <Enhanced SpeedStep Frequency Control> on cpu1
    est2: <Enhanced SpeedStep Frequency Control> on cpu2
    est3: <Enhanced SpeedStep Frequency Control> on cpu3
    Timecounters tick every 1.000 msec
    ugen0.1: <Intel EHCI root HUB> at usbus0
    uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
    uhub0: 8 ports with 8 removable, self powered
    ugen0.2: <vendor 0x8087 product 0x07e6> at usbus0
    uhub1 on uhub0
    uhub1: <vendor 0x8087 product 0x07e6, class 9/0, rev 2.00/0.14, addr 2> on usbus0
    uhub1: 4 ports with 4 removable, self powered
    ugen0.3: <vendor 0x0bda product 0x8189> at usbus0
    urtw0 on uhub1
    urtw0: <vendor 0x0bda product 0x8189, class 0/0, rev 2.00/2.00, addr 3> on usbus0
    urtw0: rtl8187b rf rtl8225z2 hwrev e
    ugen0.4: <vendor 0x0566 product 0x3107> at usbus0
    ukbd0 on uhub1
    ukbd0: <vendor 0x0566 product 0x3107, class 0/0, rev 1.10/1.00, addr 4> on usbus0
    kbd1 at ukbd0
    uhid0 on uhub1
    uhid0: <vendor 0x0566 product 0x3107, class 0/0, rev 1.10/1.00, addr 4> on usbus0
    ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
    ada0: <SanDisk SSD i110 32GB i212000> ACS-2 ATA SATA 3.x device
    ada0: Serial Number 1611143330
    ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
    ada0: Command Queueing enabled
    ada0: 30533MB (62533296 512 byte sectors)
    Trying to mount root from ufs:/dev/gptid/b3b3ce75-9d81-11e8-a6f3-007121aa43a4 [rw]...
    random: unblocking device.
    CPU: Intel(R) Celeron(R) CPU  J1900  @ 1.99GHz (2000.05-MHz K8-class CPU)
      Origin="GenuineIntel"  Id=0x30678  Family=0x6  Model=0x37  Stepping=8
      Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
      Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND>
      AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
      AMD Features2=0x101<LAHF,Prefetch>
      Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
      VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
      TSC: P-state invariant, performance statistics
    


  • From upgrade guide:

    Systems with similar console problems not containing a graphics chip supported by the i915 driver 
    may need to reinstall 2.4.4 to use a UEFI console
    

    Can it help in theory?



  • I'm an idiot šŸ¤¢ Decided to add parameters (i915kms_load="YES", ...) to /boot/loader.conf.local in advance, instead of checking the functionality without them. After deleting /boot/loader.conf.local, everything was OK. Excuse for troubling.