Netgate Discussion Forum
    • Категории
    • Последние
    • Метки
    • Популярные
    • Пользователи
    • Поиск
    • Зарегистрироваться
    • Войти

    pfSense on Watchguard M370

    Запланировано Прикреплена Закрыта Перенесена Hardware
    314 Сообщения 47 Posters 148.9k Просмотры
    Загружаем больше сообщений
    • Сначала старые
    • Сначала новые
    • По количеству голосов
    Ответить
    • Ответить, создав новую тему
    Авторизуйтесь, чтобы ответить
    Эта тема была удалена. Только пользователи с правом управления темами могут её видеть.
    • I
      it.adminpmaria @HangmansNoose001380
      отредактировано

      @HangmansNoose001380 Can you DM me the BIOS-File?.

      BigThx

      1 ответ Последний ответ Ответить Цитировать 0
      • K
        kapook00789
        отредактировано

        Can anyone DM me the unlock password bios please?

        I 1 ответ Последний ответ Ответить Цитировать 0
        • stephenw10S
          stephenw10 Netgate Administrator
          отредактировано

          Sent.

          djstraussD 1 ответ Последний ответ Ответить Цитировать 2
          • I
            it.adminpmaria @kapook00789
            отредактировано

            @kapook00789 Me too! TNX!

            1 ответ Последний ответ Ответить Цитировать 0
            • I
              it.adminpmaria @Mookatroid
              отредактировано

              @Mookatroid Can you please send me the password?

              M 1 ответ Последний ответ Ответить Цитировать 0
              • djstraussD
                djstrauss @stephenw10
                отредактировано

                @stephenw10 hi, just to confirm the correct one is in /post/1067389 ? Thank

                1 ответ Последний ответ Ответить Цитировать 1
                • M
                  Mookatroid @it.adminpmaria
                  отредактировано

                  Это сообщение удалено!
                  1 ответ Последний ответ Ответить Цитировать 0
                  • VioletDragonV
                    VioletDragon @networkBob
                    отредактировано

                    @networkBob Can’t really find much on the board, can you see a header to clear BIOS Password ? If not you would require to re-program the BIOS chip, I’ve done quite a few on Security Appliances and Laptops.

                    Regards.

                    1 ответ Последний ответ Ответить Цитировать 0
                    • stephenw10S
                      stephenw10 Netgate Administrator
                      отредактировано

                      I think you may be replying to an old post there. 😉

                      Most of that has been solved or at least understood at this point.

                      VioletDragonV 1 ответ Последний ответ Ответить Цитировать 0
                      • VioletDragonV
                        VioletDragon @stephenw10
                        отредактировано

                        @stephenw10 My bad. Sorry about that, I saw the post on a email notification so thought I’d chime in.

                        Regards.

                        1 ответ Последний ответ Ответить Цитировать 1
                        • I
                          it.adminpmaria
                          отредактировано

                          Thanks everyone for the info! I realized leter that the PS was on that image. jejejje
                          Another question. It make sense to use SATA port with a SSD instead the MSATA? I saw that we can disable the MSATA PORT, so we can test on the SSD without buying another disk or removing the original.

                          1 ответ Последний ответ Ответить Цитировать 0
                          • stephenw10S
                            stephenw10 Netgate Administrator
                            отредактировано

                            Yes, if you have a spare SSD or mSATA drive you can just swap it in and retain the original driver and OS.

                            1 ответ Последний ответ Ответить Цитировать 0
                            • I
                              it.adminpmaria
                              отредактировано

                              So now my M470 works flawlessly with the SSD disk but I have two issues:

                              1. The names of the interfaces: IG0 and so on BUT begining from the PCI MODULE: so my port 0 on the front of the M470 is IGB08 and so on. The extra module with 6 ports is 0 to 6
                              2. The external module, works and is detected BUT when I connect the network to these ports, the system dont detect the conection ever.

                              Have you the same issues?
                              TNX

                              1 ответ Последний ответ Ответить Цитировать 0
                              • stephenw10S
                                stephenw10 Netgate Administrator
                                отредактировано

                                Yes, the ports in the add-on module are parsed first. I'm not aware of a six port module though. I've seen the 8 port 1G module and 4 port 10G module.

                                I 1 ответ Последний ответ Ответить Цитировать 0
                                • I
                                  it.adminpmaria @stephenw10
                                  отредактировано

                                  @stephenw10 Sorry my mistake, it's 8 port.
                                  Apparently works well because it detects (first) but when I connect the cables the interface never detects the conection in any of the 8 ports.

                                  1 ответ Последний ответ Ответить Цитировать 0
                                  • stephenw10S
                                    stephenw10 Netgate Administrator
                                    отредактировано

                                    Like no link LEDs? ifconfig never shows the link as up?

                                    I 1 ответ Последний ответ Ответить Цитировать 0
                                    • I
                                      it.adminpmaria @stephenw10
                                      отредактировано

                                      @stephenw10 Done! I was the port mapping on the module. WATCH M470 ports.png

                                      Perfect!

                                      I 1 ответ Последний ответ Ответить Цитировать 0
                                      • I
                                        it.adminpmaria @it.adminpmaria
                                        отредактировано

                                        @it-adminpmaria-santcugat-org Bad things happends if you remove the module. 😂

                                        djstraussD 1 ответ Последний ответ Ответить Цитировать 0
                                        • djstraussD
                                          djstrauss @it.adminpmaria
                                          отредактировано

                                          @it-adminpmaria-santcugat-org for safety measures I suggest you to install and configure everything without the module, then you plug it in and configure the extra ports. Safety measures first

                                          I 1 ответ Последний ответ Ответить Цитировать 0
                                          • stephenw10S
                                            stephenw10 Netgate Administrator
                                            отредактировано

                                            Adding the module will change the NIC order if you have already assigned them.

                                            djstraussD 1 ответ Последний ответ Ответить Цитировать 0
                                            • Первое сообщение
                                              Последнее сообщение
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.