Netgate Discussion Forum
    • Категории
    • Последние
    • Метки
    • Популярные
    • Пользователи
    • Поиск
    • Зарегистрироваться
    • Войти

    pfSense on Watchguard M370

    Запланировано Прикреплена Закрыта Перенесена Hardware
    314 Сообщения 47 Posters 148.9k Просмотры
    Загружаем больше сообщений
    • Сначала старые
    • Сначала новые
    • По количеству голосов
    Ответить
    • Ответить, создав новую тему
    Авторизуйтесь, чтобы ответить
    Эта тема была удалена. Только пользователи с правом управления темами могут её видеть.
    • I
      it.adminpmaria @djstrauss
      отредактировано

      @nicknitro Bad news, when you start without the module and put the module later, the mapping of the interfaces change to the schema that I show you later.

      1 ответ Последний ответ Ответить Цитировать 0
      • stephenw10S
        stephenw10 Netgate Administrator
        отредактировано

        Yup. 😉

        1 ответ Последний ответ Ответить Цитировать 0
        • djstraussD
          djstrauss @stephenw10
          отредактировано

          @stephenw10 Oh, I see..... well, maybe there's a file to rewrite the modules order, perhaps a init script or similar to automate the process.

          1 ответ Последний ответ Ответить Цитировать 0
          • stephenw10S
            stephenw10 Netgate Administrator
            отредактировано

            There is one thing you can do. You can add PCI device wiring hints:
            https://man.freebsd.org/cgi/man.cgi?query=pci#DEVICE_WIRING
            Doing that you can specify the NIC order by the PCI bus location which doesn't change.

            However I don't recommend doing that. If you lose the custom values (which are not stored in the config) the NICs will be parsed in a completely different order. Better in my opinion to just use the default order and put up with the unexpected NIC sequence.

            1 ответ Последний ответ Ответить Цитировать 1
            • K
              kapook00789
              отредактировано

              Hello
              Original m370 bios can support cpu intel 7th Generation ?

              S 1 ответ Последний ответ Ответить Цитировать 0
              • S
                Squuiid @kapook00789
                отредактировано Squuiid

                @kapook00789 said in pfSense on Watchguard M370:

                Hello
                Original m370 bios can support cpu intel 7th Generation ?

                The best CPU to use is an Intel Core i7-7700T. It’s fast, multithreaded and only 35W TDP. (QC/8MB/8T/2.9GHz/35W).
                As for the original BIOS, as in if you've never run WatchGuard XTM software on it and upgraded, then that I'm not sure.

                stephenw10S 1 ответ Последний ответ Ответить Цитировать 0
                • stephenw10S
                  stephenw10 Netgate Administrator @Squuiid
                  отредактировано

                  @Squuiid said in pfSense on Watchguard M370:

                  The best CPU to use is an Intel Core i7-7700T. It’s fast, multithreaded and only 35W TDP. (QC/8MB/8T/2.9GHz/35W).

                  Still surprisingly expensive though. I'd argue the 7500T is better value. Potentially much better depending on how cheap you can find one.

                  1 ответ Последний ответ Ответить Цитировать 0
                  • A
                    aatti @HangmansNoose001380
                    отредактировано

                    @HangmansNoose001380 Hi, I've got an M470 and would like to replace the bios to an unlocked one. Would you please send me the download link? Thank you!

                    1 ответ Последний ответ Ответить Цитировать 0
                    • K
                      kingwilliam
                      отредактировано

                      @HangmansNoose001380 may i have m470 bios, because i changed cpu to xeon e3 1260l v5, i want to release the speedstep

                      thank you!

                      1 ответ Последний ответ Ответить Цитировать 0
                      • S
                        SpyTek007
                        отредактировано stephenw10

                        Admin edit: Please don't post the password directly here.

                        1 ответ Последний ответ Ответить Цитировать 0
                        • A
                          angelroc
                          отредактировано angelroc

                          Can anyone DM me the unlock password bios please?

                          BigThx

                          S 1 ответ Последний ответ Ответить Цитировать 0
                          • S
                            Squuiid @angelroc
                            отредактировано

                            @angelroc do always read a thread before posting. It’s there in plain sight.
                            https://forum.netgate.com/post/1067389

                            1 ответ Последний ответ Ответить Цитировать 1
                            • A Anteater4341 referenced this topic on
                            • F
                              FadedRedwood
                              отредактировано

                              hey all, i have seen/know the password but does anyone have a copy of the mod/unlocked bios? I really want to flash a m470 and enable speedstep. any information is greatly appreciated!

                              all the best

                              1 ответ Последний ответ Ответить Цитировать 1
                              • T
                                towatai
                                отредактировано

                                Same here. Got a M670 for free and want to enable speedstep.

                                1 ответ Последний ответ Ответить Цитировать 0
                                • stephenw10S
                                  stephenw10 Netgate Administrator
                                  отредактировано

                                  You should see speedshift active on there already if the CPU supports it. Pretty sure the default CPU in the M670 does. That's superior to speedstep in almost every way.

                                  V 1 ответ Последний ответ Ответить Цитировать 0
                                  • V
                                    v16v @stephenw10
                                    отредактировано

                                    I have a problem with my M370, it starts but shuts down at once. I would need a copy of a bios file if anyone has one.

                                    Thanks in advance.

                                    1 ответ Последний ответ Ответить Цитировать 0
                                    • stephenw10S
                                      stephenw10 Netgate Administrator
                                      отредактировано

                                      Anything shown at the console at all? Did it boot previously?

                                      V 1 ответ Последний ответ Ответить Цитировать 0
                                      • V
                                        v16v @stephenw10
                                        отредактировано

                                        @stephenw10
                                        Can't get into console because it shuts down. It has worked fine for years but after a power outage it won't start.

                                        1 ответ Последний ответ Ответить Цитировать 0
                                        • stephenw10S
                                          stephenw10 Netgate Administrator
                                          отредактировано

                                          But if you have the console open you see nothing at all? No POST output from the BIOS? No errors?

                                          It sounds like a hardware failure. That's what happens if you try to power up without any RAM present for example.

                                          I would try reseating the RAM and CPU.

                                          V 1 ответ Последний ответ Ответить Цитировать 0
                                          • V
                                            v16v @stephenw10
                                            отредактировано

                                            @stephenw10
                                            How to reset RAM and CPU?
                                            I think there is something with the bios that is causing it not to boot.

                                            1 ответ Последний ответ Ответить Цитировать 0
                                            • Первое сообщение
                                              Последнее сообщение
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.