Extremely slow networking under Hyper-V on Intel NICs
-
I am not sure that your scenario is apples to apples. I am having almost exactly the same issue as the OP.
FioS gigabit connection
-direct through verizon router from laptop is 900mbps
-no packaged, no snort, etc. just a few basic routes and a nat or two
-speedtest-cli 450mbps max
-lan traffic through pfSense 250mbps max
-speedtest through firewall < 50% cpu on pfSense
-hyper-v host CPU less then < 5% during speed test
-vmq and other setting disabled, same as the OP.I have tried everything under the sun to resolve this. Next step is a metal install - then on to another firewall if that does not work.
-
idk but i have a dell R710 with ubuntu server and virtualbox, suricata on all the interfaces and i have full speed
it seems like a problem with windows to me and franky it's not something to be surprised about -
What is "full speed"?
FWIW - I don't doubt it could be a windows issue.
~20 Year MS partner here that fully migrated to Mac OS 1 years ago and will NEVER look back. I no longer use Office and do just about anything I can to avoid deploying windows in an SMB environment. It is an unmitigated disaster from the dekstop to the data center and it gets worse every day.
-
i mean that with or without pfsense in the middle i have the same speed near the limit of what my isp is declaring, fttc 200/20
the last Windows server I had to manage was Windows sbs 2003, and i had realy big trouble managing dns server/dc, nothing was working as expected ... instead i love that you can configure a server where you just need to read (and understand) a commented text file instead of searching all over in a not human friendly regedit whenever you have trouble. maybe 20 years ago it wasn't like today but now it never happened to me a real reason in a smb environment to have a windows server over a linux one.
i must admit that i don't have any experience with mac server -
I don't use Mac server (it was garbage and is pretty much discontinued). We just avoid windows server (and desktop) whenever possible for most clients now. In many cases we deploy terminal services (RDS) on Server 2008 running a windows 7 desktop. That is too coming to an end due to 3rd party software requirements. That said, 90% of my customers applications are SaaS in one form or another anyway.
In any case, I think the relevant issue here is not the bottleneck IN pfSense that could be many things -
What appears to be the real issue is that numerous people are having trouble getting anything north of 500mbps from the pfSense VM to the WAN when hosted on hyper-v.
-
yes, indeed, we are going out of topic and entering in personal preferences. anyway i agree with you
-
@ITFlyer According to this article you have to change the mac address on the virtual switch after disabling VMQ.
See https://www.dell.com/support/article/us/en/04/sln132131/windows-server-slow-network-performance-on-hyper-v-virtual-machines-with-virtual-machine-queue-vmq-enabled?lang=en
When you say you used a fixed disk size are you sure? In 2016/2019 you have to create the fixed disk outside the new VM wizard. You have to go to new > disk in the upper right hand side and select fixed disk type. Then attach it to your new VM that you created with the "attach a disk later" option. If you manually typed in something other then 127GB in the wizard it is still a dynamic vhdx.
With a dynamic vhdx I get between 40-60ish MB/s typically in my guests. In my guests that are fixed vhdx I get 113 MB/s without waiver.
You can convert a disk from dynamic to fixed via the disk tools, or create a new disk and reinstall pfsense if you are in fact using a dynamic disk.
-
You can configure the Hyper-V with additional resources and use these tips in the name of the speed:
<snipped by mod - screams spammy on OLD thread>
-
I appreciate you taking the time to post your spammy list of stuff along with a link promoting your own site, but what does any of this have to do with the specific networking issue we're talking about?
@UhimU said in Extremely slow networking under Hyper-V on Intel NICs:
You can configure the Hyper-V with additional resources and use these tips in the name of the speed:
Enable Hyper-V Integration Services
Use fixed VHD files
Don’t use Hyper-V snapshots as a Hyper-V backup alternative
Configure the size of paging files
Do not create -
I think the information can be useful to people and just share my thoughts. Sorry if you understood this as the spam
-
Sorry but I am with @ITFlyer - and I edited your post to remove what amounts to keywords and a link..
Glad your wanting to help - but keep it on topic to the question at hand.. And why would you join a forum, minutes latter add such a post to a almost year old thread, because it mentions something related to what your wanting to promote is what it looked like.
