Seamless roaming

johnpoz

Well I don't buy his numbers to be honest... 70% real world seems a bit optimistic to be sure ;)

If you want a real world test - load up all your devices doing speed tests at the same exact time.. What is the combined throughput.. That is what is going to matter.. Doing what mobile devices do - the difference between even 300 and 550 is not going to really be noticed by the user.. Is your music going to stream slower ;) Maybe your movie buffers for .2 seconds longer before it starts ;)

JKnott

@johnpoz said in Seamless roaming:

Huh? That is not how unifi works at all.

I wasn't talking about Unifi. I was referring to systems that use controllers for log in and controlling access to the APs. I first heard of this 11-12 years ago, but I've forgotten the company name. They referred to it as "blanket" WiFi. With that system, you had to use their switch and not just plain PoE.

mcury

Yes, you are completely right :)
It's working flawless, roaming events happening, I can't really complain about it. :)

Qinn

Anyone any idea how I can get more info on the following failure: "WPA Authentication Timeout/Failure", which is under "Association Failures" in the dashboard. Tried finding it under "Events" nothing and there is no data at all under Alerts.

mcury

@Qinn You can try a cat /var/log/messages inside the AP, just ssh to it.

Qinn

@mcury Good thinking, so did it and downloaded 4 files from

/var/log 

fastapply
lastlog
messages
messages.old

First 2 were empty in the last 2 the failure was not mentioned.

mcury

@Qinn You would be getting something like this:

nanohd-BZ.v5.24.0# cat /var/log/messages | grep failure
Thu Jul 9 08:16:26 2020 user.info : stahtd[20294]: [STA-TRACKER].stahtd_dump_event(): {"auth_delta":"0","message_type":"STA_ASSOC_TRACKER","mac":"X:X:X:X:X:X","vap":"ra0","wpa_auth_failures":"1","event_type":"failure","assoc_status":"0","assoc_delta":"0","event_id":"2","auth_ts":"61017.241076"}

Qinn

@mcury said in Seamless roaming:

cat /var/log/messages | grep failure

GRumpff , did a

cat /var/log/messages | grep Failure

instead of

 cat /var/log/messages | grep failure

Found it, thanks!!

mcury

Reverted the nanohd firmware back to the stable version, 4.3.20, and the 300Mbps limitation is no longer happening..
Just saying this for information purposes, not that the users will really notice that, but I'm getting now around 600.

Qinn

@mcury Thanks for the info

johnpoz

@mcury said in Seamless roaming:

but I'm getting now around 600

On a 866.7 PHY?

mcury

@johnpoz Yeap.
5GHz 80MHz, phone shows 866Mbps

https://community.ui.com/releases/UAP-USW-Firmware-5-24-0-11950/74e3acca-9a22-4fa0-b76c-c654854638d4#comment/68e879e7-bdd4-4450-8ddd-0d3bfeed5fa4

johnpoz

Looks more like 516 mbps to me ;) Which is actually realistic.. At 60% of PHY.. not 70..

5]   0.00-10.03  sec   618 MBytes   516 Mbits/sec

Just tested off my phone to speedtest getting 437mbps down on 5.24 firmware on AC-Pro with iphone Xr.. Showing a 780 PHY.. Or 56% which is good..

mcury

@johnpoz True.. 516Mbits/s :)
I'll stay on this 4.20 firmware for a while, it's working pretty well.
In my scenario, with just one AP, the roaming events are working, no need to update to 5.24 at this time.

johnpoz

Yeah I didn't really see anything in the firmware related to my devices - but I just like to be on whatever is the latest.. Helps me know if actually seeing what others say they see on the threads over on unifi when they post the latest updates..

mcury

Yeah, the release notes for this 5.24 release got a lot for the new wifi 6 devices..
I usually get the latest too.
What I will try to do next time, in case that I can hold myself to not update Is to wait a little longer, to read the forum feedback. But I doubt that I'll be able to hold myself

Qinn

There is no cpu/board temperature measurement on the Unifi AP's?

Derelict

Maybe ask Ubiquiti?

Qinn

@Derelict Your absolutely right, as this is a Netgate forum, so I posted it

https://community.ui.com/questions/No-temperature-monitoring-on-UAP/a48836fd-9410-4203-becb-fc3734658f22

johnpoz

Kind of hard to show temp without temp sensors. I do not believe there are any sensors in the AP, this question has come up before over on their forums. Which is actually kind of funny, since they actually sell a temp sensor ;)