Senao bridges

  • Hello I have problems to connect Senao brdiges to pfSense with senao cards NL2511CD 200mw & Soekris 4511, 80211b, with WEP 64bits , without WEP works fine but when I place WEP, does not attach to AP.
    If I use some other soft it does work, does anybody knows a trick?
    Here is the output…
    $ ifconfig -v wi0
    wi0: flags=8943 <up,broadcast,running,promisc,simplex,multicast>mtu 1500
    inet6 fe80::202:6fff:fe35:3a07%wi0 prefixlen 64 scopeid 0x7
    ether 00:02:6f:35:3a:07
    media: IEEE 802.11 Wireless Ethernet autoselect mode 11b <hostap>(DS/2Mbps <hostap>)
    status: associated
    ssid velonet channel 11 (2462) bssid 00:02:6f:35:3a:07
    stationname "FreeBSD WaveLAN/IEEE node"
    authmode SHARED privacy MIXED deftxkey 1
    wepkey 1:40-bit powersavemode OFF powersavesleep 100 txpowmax 100
    rtsthreshold 2346 mcastrate 1 fragthreshold 2346 -pureg protmode OFF
    -wme -burst ssid SHOW -apbridge dtimperiod 1 bintval 100

    does anybody see anything unusual?? thanks in advance</hostap></hostap></up,broadcast,running,promisc,simplex,multicast>

  • Try authmode open.

Log in to reply