6100 Max: ISP Wan Ip Change Internet Loss - Requires Reboot

stephenw10

Do you see SWAP enabled on the dashboard? That is required to store a crash report if it actually creates one.

sheen73

No sir, it looks like I am not? How can I enable?

last pid: 32337; load averages: 0.22, 0.16, 0.11 up 0+19:11:58 05:35:30
60 processes: 1 running, 59 sleeping
CPU: 1.1% user, 0.1% nice, 2.2% system, 0.2% interrupt, 96.4% idle
Mem: 211M Active, 368M Inact, 903M Wired, 6304M Free
ARC: 287M Total, 94M MFU, 183M MRU, 16K Anon, 1683K Header, 8359K Other
244M Compressed, 689M Uncompressed, 2.82:1 Ratio

stephenw10

Ah, interesting. OK check that a SWAP partition is defined. At the command line run: gpart list

sheen73

@stephenw10
Here you go


Geom name: nvd0
modified: false
state: OK
fwheads: 255
fwsectors: 63
last: 234441639
first: 3
entries: 4
scheme: GPT
Providers:
1. Name: nvd0p1
   Mediasize: 209715200 (200M)
   Sectorsize: 512
   Stripesize: 0
   Stripeoffset: 1536
   Mode: r0w0e0
   efimedia: HD(1,GPT,4792eff1-f262-11ec-8524-a1746a8b4cc2,0x3,0x64000)
   rawuuid: 4792eff1-f262-11ec-8524-a1746a8b4cc2
   rawtype: c12a7328-f81f-11d2-ba4b-00a0c93ec93b
   label: (null)
   length: 209715200
   offset: 1536
   type: efi
   index: 1
   end: 409602
   start: 3
2. Name: nvd0p2
   Mediasize: 113922309632 (106G)
   Sectorsize: 512
   Stripesize: 0
   Stripeoffset: 209716736
   Mode: r1w1e1
   efimedia: HD(2,GPT,4792eff7-f262-11ec-8524-a1746a8b4cc2,0x64003,0xd43263f)
   rawuuid: 4792eff7-f262-11ec-8524-a1746a8b4cc2
   rawtype: 516e7cb6-6ecf-11d6-8ff8-00022d09712b
   label: (null)
   length: 113922309632
   offset: 209716736
   type: freebsd-ufs
   index: 2
   end: 222914113
   start: 409603
3. Name: nvd0p3
   Mediasize: 5902090752 (5.5G)
   Sectorsize: 512
   Stripesize: 0
   Stripeoffset: 114132026368
   Mode: r0w0e0
   efimedia: HD(3,GPT,4ec35717-ac04-11ed-b9e8-90ec7762d5f6,0xd496642,0xafe561)
   rawuuid: 4ec35717-ac04-11ed-b9e8-90ec7762d5f6
   rawtype: 516e7cb5-6ecf-11d6-8ff8-00022d09712b
   label: (null)
   length: 5902090752
   offset: 114132026368
   type: freebsd-swap
   index: 3
   end: 234441634
   start: 222914114
Consumers:
1. Name: nvd0
   Mediasize: 120034123776 (112G)
   Sectorsize: 512
   Mode: r1w1e2

stephenw10

Ok SWAP is present. Run: cat /etc/fstab

sheen73

@stephenw10
Does this mean there is nothing?

 # Device                Mountpoint      FStype  Options         Dump    Pass#
/dev/msdosfs/EFISYS     /boot/efi       msdosfs rw,noatime,noauto       0       0
/dev/gptid/4ec35717-ac04-11ed-b9e8-90ec7762d5f6		none	swap	sw		0	0

stephenw10

Oh OK, that looks correct. Try running: swapinfo

sheen73

@stephenw10


Device          512-blocks     Used    Avail Capacity

stephenw10

Hmm, odd.
Ok try changing that second line in /etc/fstab to:
/dev/nvd0p3 none swap sw 0 0

Then reboot to apply that and check swapinfo again. Or it should be shown on the dashboard.

sheen73

@stephenw10
Sorry how do i run that specifically? Below gave me permission denied error when run

/dev/nvd0p3 none swap sw 0 0

stephenw10

Sorry open /etc/fstab in Diag > Edit File from the gui.
Make that second line look like:
/dev/nvd0p3 none swap sw 0 0

sheen73

@stephenw10
Ok cool, done, working and showing on dashboard. Time to wait another 20 days to see if it fails :).

Thanks for all the help.

stephenw10

Nice! Yes if it does create a crash report you will at least see it now.

sheen73

@stephenw10
I don’t know if crash is the right wording now. Looks like on isp / wan ip change it can’t recover and gets hung.