I'm new in the board.
I have a Problem with the IPv6 Routing on pfsense. I have to build up a Dual Stack enviroment for a workshop.
There are three diffrent networks.
pls can sombody tell me the routes and what I have to configure in the NAT. The firewall is complety disabled.
The network topology is in the attachment ;)
no body know something :)
Matthias last edited by
There is no NAT in IPv6 so you don't have to worry about that.
On each router go to System -> Routing, click the routes tab and add a new route. For the destination network enter the LAN address of the other router. For the gateway choose your IPv6 gateway. Do the same thing on the other router but use the other LAN address as the destination network.
databeestje last edited by
Each upstream hop needs to know about the downstream routers. The easiest way to accomplish this is by using the static routes feature.
I know I have to do it with the routes but it's still not working :(
How I disable the Firewall feature correctly?
Haha jeeepii it's working
You can't have a route for ipv4 and ipv6.
So only one for IPv6
tnx for the help