Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    PfSense with Gigabyte GA-J1900N-D3V

    Scheduled Pinned Locked Moved Hardware
    182 Posts 63 Posters 155.9k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • R
      RussellB
      last edited by

      @RussellB:

      I have been using the GA-J1900N-D3V with pfSense for about a month.  This is my first router build and I did not have any problems other than a memory stick which was not compatible and caused the system to fail to boot.  (I ended up using a memory stick out of a laptop; the new memory stick worked fine in the laptop.)  I am using an Intel Dual NIC since I had read a lot of problems with Realtek NICs.  I purchased the Intel PWLA8492MT PRO/1000 MT PCI/PCI-X Dual Port Server Adapter:

      http://smile.amazon.com/dp/B00006HX1V

      I am getting 150Mbps down and 12Mbps up and my CPU utilization goes to about 30%.  The rest of the time CPU utilization sits between 0% and 3%.

      This is a home router, so I am not running any VPNs.  I have Snort installed, but I am still trying to figure it out.

      I can't speak for enterprise use, but as a home router, this thing is awesome.

      For WiFi I installed an Ubiquiti Networks UAP-AC-LR-US 802.11ac Long Range Access Point.  I mounted it on the ceiling in the center of our 2200 sq ft single story house and get awesome wireless coverage throughout.

      I have to qualify what I previously wrote about the Gigabyte GA-J1900N-D3V.  I just upgraded to Cox Gigablast and my little pfSense router was just not up to the task.  Using the dual Intel NIC in the PCI slot the fastest I could get was about 350Mbps down and up.  When I moved my WAN to one of the onboard Realtek ports, I got about 500Mbps down and 700Mbps up; this was the fastest configuration.  Unfortunately, the Netflix R6300v2 Cox gave me can manage over 900Mbps down and up.  I think the PCI bus on the GA-J1900N-D3V is too limited for a gigabit connection.  If you are planning on upgrading to a gigabit connection the GA-J1900N-D3V just won't cut it.

      1 Reply Last reply Reply Quote 0
      • J
        jdubin
        last edited by

        @RussellB:

        I think the PCI bus on the GA-J1900N-D3V is too limited for a gigabit connection.

        No surprise that PCI doesn't have the bandwidth for gigabit, never mind dual gigabit on the same bus!  But you still have that mini-PCIe socket which could prove useful using something like this: http://www.ebay.com/itm/Mini-PCI-E-to-PCI-E-Express-1X-USB-Riser-Card-with-FFC-Cable-Up-to-2-5Gpbs-/262289991565
        Combined with a cheap server-class dual Intel NIC which seem to be quite cheap on eBay these days, I'd bet your throughput would be significantly improved.

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.