at the terminal, type:

which openvpn

Nice, I'll link it from the tutorials site later when I get time. Thanks!

Look in the package area.  There is a rc.d thread that is a sticky.

thanks

I read the stickys and searched but didn't come up with those answers. i have a openvpn connection running.

@dairaen:

cheers,

tpunder, could you please send me or upload a screenshot of
your working outbound NAT rules so i can add them to the
tutorial?

thanks.

kind regards
dairaen

No problem, I just sent a PM with a screenshot.

Follow this nice tutorial http://www.uplinksecurity.de/data/pfsense-ovpn.pdf

me to :) (ipsec is easy) but i want it with Openvpn

If I'm understanding what you want….

On your WLAN... only create a rule to allow the OVPN connection.
Then you'll push DNS,WINS, and GATEWAY via OVPN
also add a push route to your LAN, if you want a connection there.

I haven't used openvpn yet but I have several locations running ipsectunnels. Biggest network consists of 12 locations that are all connected to each other through the mainoffice (only location that has a static IP) which acts as vpn concentrator. This setup is only using pfSense's everywhere.

I also have another setup where a pfSense CARP cluster has VPN connections to a cisco pix, another pfSense and a sonicwall. Everything works smooth :-) For some examples how to configure the non pfSense systems see http://doc.m0n0.ch/handbook-single/#Example.VPN .

Before you start to set this up you need to do some subnetcalculations. If you use IPSEC for that and need the remote locations to talk to each other through the central location you need to use some bigger subnetmasks at the central unit.

Someone was working on a status page.  Search the forum.

the site 2 site is very simple to set up (with the pdf document)…. but is it also possible to connect 3 pfsense client machines to one openvpnserver-pfsensemachine and routed the networks behind the 3 pfsense machines......(i don't want to open to much external (firewall) ports

PC1                                              PC2
      |                                                |
NETWORK1                                NETWORK2                                NETWORK3
      |                                                |                                          |
OPENVPNCLIENT1                    OPENVPNCLIENT2                        OPENVPNCLIENT3
      |                                                |                                          |
PFSENSE1                                  PFSENSE2                                  PFSENSE3
      |                                                |                                          |
    ---------------------------------------------------------------------
                                                      |                                       
                                            OPENVPNSERVER
                                                PFSENSE4
                                                      |
                                                      PC3

So that PC2 can ping PC1 and PC3 and PC3 can ping PC2 and PC1 and PC1 can ping PC2 and PC3

@Numbski:

billm, I hope you're wrong about this.  Here's why:

I have a client that needed some serious entropy available to an application.  We purchased a hifn card to supplement /dev/random.  FreeBSD does not create /dev/hwrandom, and from all appearances, speed of the customer's application went waaay up, and the deployment passed some certification process that I was not involved in.  So….hmm.

Interesting stuff.  Perhaps I should dig into this further?  BTW, another option if I recall correctly would be to insert a sound card, get the driver working, get the block device for the mic-in, then take and have that constantly dumping to /dev/random too. (don't hold me to that, never personally tried it!)

You're probably correct.

–Bill

Maybe a link in the tutorial to http://www.openvpn.se/mycert/ would be nice too.

Ok…
Thanks... thought so...

then I'll test a little more  :P

cheers,

i will add all solutions & fallbacks to the tutorial
so we can prevent further problems like these.

will be online next week.

kind regards
dairaen

ok scratch that. its fixed

ifconfig tunX destroy