thank you guys..and it works perfectly great

Thanks for the insight, I will remove the virtual CD drive and see what happens I was just caught off guard because these pfSense instances have been running fine for over a year now only to suddently start being unreliable like this.

It's apinger.  I think I restart it by turning gateway monitoring off then back on for the interface.

The external IP addresses using the most bandwidth are Akamai & Level3 caching servers.  Are you running Squid cache?  Is it possible that a Windows Update or some other large blob is being downloaded to your Squid cache?  That would explain high bandwidth into WAN that isn't being passed out to LAN.

You are right! I just tested using speedtest.net, and now I see the 800Mbps peaks without issue.

So curious are you actually using ipv6?  If not another option to remove the noise is remove it at the source by turning off ipv6.  Sure looks like ipv6 multicast for something to do with UPnP/SSDP with that destination. You can track down what is generating the noise..  And turn off ipv6 ;)  No noise, and less garbage on your network.

Thanks Bill for your reply. I was on holiday out at a remote location so could not response quickly. I will check the material and see if it would help me set this up quickly. Do you also have any literature on how to setup IDS and IPS with snort.

That's great, thanks guys  ;)

That was it!  I thought the Bundled Support Information link would just open a PDF like many of the other links in the pfSense support areas but I was wrong!  Thanks! [image: ScreenShot050.png] [image: ScreenShot050.png_thumb]

Thanks Jimp and KOM. KOM, When reducing the squid cache to 500mb and flushing squid did not free up any space I started to hunt for the culprit. Jimp I wish I looked at the inodes before i started deleting 60 Gig of SARG files (Just to be sure). There were a zillion small files in there. running a single rm -R * on the sarg-reports sub directories took 7 hours to complete.  Now my disk space is pitifully empty: $ df -hi Filesystem    Size    Used  Avail Capacity iused ifree %iused  Mounted on /dev/ad0s1a    81G    1.9G    72G    3%    42k  11M    0%  / devfs          1.0k    1.0k      0B  100%      0    0  100%  /dev /dev/md0      3.6M    46k    3.3M    1%      27  739    4%  /var/run devfs          1.0k    1.0k      0B  100%      0    0  100%  /var/dhcpd/dev Thanks for your help! looks like we solved this one.. I am putting it down to the inodes being full. Needless to say I removed the zero in the reporting options Cheers..

so your gateway is .145 what mask did you put on the vips? You sure its not just your server firewalling?  What are you running for your webserver?  Is it linux or windows based?  I don't understand why people do 1:1 why not just forward the ports you want? If was me I would create all the vips, and then setup rule on wan to allow ping.  And validate they all ping.  Then move on to what ports on what IP you want to forward to your inside boxes.

pfSense log files are binary circular logs of a fixed size. They do not "rotate", they roll over. https://doc.pfsense.org/index.php/View_Log_Files_in_the_Shell The size cannot be changed on pfSense 2.1.x or before, but it can be changed on pfSense 2.2 in the Settings tab of the system logs.

Hmm, yes too many errors to ignore if was me. Do you have a switch you can put in between the WAN NIC and your modem? Steve

Your right because after testing I didn't have any joys. I am tempted to move it to ESXi anyway which would solve this. A 1GHz via just isn't cutting it anymore now I am running squid and dansgardian.

Maybe you should look at this: https://redmine.pfsense.org/issues/1943

I see example , and i also do nslookup on firewall log screen. and many dns(port:53) logs up ..like this matter is existing , should not Introduce auto resolve function in PFSense , i interpreted. I still like study of English is not enough :-[ Even in awkward sentences,Thank you for reading.

Ouch! That's unlucky.