As I posted in the other thread, just replace the contents of that file with a known good copy like here: https://raw.github.com/bsdperimeter/pfsense/master/etc/gettytab

OpenNTP is used for syncing time even when the service is not enabled. IIRC the difference is when it's "disabled" in the GUI, it is not setup to listen for client connections.

It should be fine

Just replaced it and the error disappeard. Thanks jimp Btw file wasnt empty so probably some blank lines.

It seems that in the pfsense forum only network noobs hang around ;) not any creative idea for this problem ?

Thank you all, for Captive portal server I can allowed IP for Manager group, It worked.

Bare in mind though that your results seem to show your CPU is not running at 100% so there is no need to offload calculations to the NIC. In fact if the NIC/driver is the bottle neck in your system it may be better to have your CPU doing those calculations. Steve

Its a point to point line… With a wagon wheel you mean: honeypot like /23 covering the guest subnets separate guest subnets /24

See here for somebody else's experiences.

Cool- good to see its working for you! Now I need to go loiok at my setup and see if I have that checked or not… :)

I JUST figured that out myself (by trial and error) and logged back in here to let everyone know. Thanks for posting this! If I hadn't been desperate enough to try something, you would have saved my life here. I learned also that to do it easier, you can just type "viconfig", which will load the config, and upon closing it will kill the cached config file, causing PFsense to reload the new config. Means you don't have to reboot.

Far as I know you must have 3. One for each physical nic and one cluster that is "shared".

I have fixed my problem….finally. I was finally able to add in a route to Firewall A into Firewall B.  This now allows items behind Firewall B to see the servers behind Firewall A.

Solution to my problem is here. http://forum.pfsense.org/index.php?topic=38911.0 However, I am unable to setup the bridge via the GUI. Anyone have the proper steps or can point me to a link that shows the process. thanks.

meh found the solution on user dn i had put only the username the right is to put "cn=rad.adm,cn=users,dc=rad,dc=local"

Ok no 1 sorted. No used to having to put the block rule at the top as used to the cheap stuff.  Just need to sort out the content filter and I am home and dry. Thanks

Gotcha, thank you!  ;D