https://github.com/opoplawski/ansible-pfsense now has a basic pfsense_user module. Feedback welcome.

Yes.

Found it, thx. I have a similar problem still. When I go to a website, the site itself might fetch scripts etc from other domains which would need to be whitelisted, too. Doing that manually is a hassle in particular when the external resources are fetched through muh.cloudfront.net while the other day it is meh.cloudfront.net. Can squid whitelist a whole website?

Even if your hardware is 32bit, just means its time you refresh the hardware.. Clearly any 32bit hardware in this day and age is well past its use by date ;)

Try enabling powerd in System > Advanced > Misc to get CPU speed scaling etc. Steve

Docker running on pfSense rather than pfSense in Docker? Yeah, definitely not going to work. Also a bad idea to run anything like that on your firewall. Steve

But the admin user should be given the same password as that new user. That is done as Azure won't allow using the admin user directly. Steve

@JKnott yes, i misread Rico's instruction and put in an invalid ip. i'm a newby to network stuff. tnx for the ed.

@Derelict I ordered one. Guess we'll see what that does.

@JKnott i finally got it working. now i just need to figure out the port forwarding

@johnpoz said in Having trouble understanding the best way to connect pfSense to my environment: are you not knowing how to create a lagg interface? But your switching environment needs to support the ability to do that.. Creating a lagg over non stacked switches can be problematic at best, etc. I have Dell N2024 switches that are stacked. are you proposing to create LAG interface of type LACP and connect one port to switch 1 and the the other to switch 2? and do it from both master and backup? @johnpoz said in Having trouble understanding the best way to connect pfSense to my environment: They RDP over the public internet? - Again Ouch! each company has fiber connection to the internet and vpn ipsec to the cloud.

@JKnott It seems to be reporting status correctly. And I do only let it run for a minute or two before I plug it back in (afraid to let the pfSense appliance turn off without being shut down).

@bmeeks Checked that reddit post and everything looks to be as it should IPv4 is my default gateway and the address is correct. No LAN gateway configured.

Where exactly did you take those captures?

Found this thread and it seems to be a same issue, in thats its the same ISP https://forum.netgate.com/topic/137434/pfsense-wan-keeps-disconnecting-out-every-10-mins/6

@ivor I believe it's human being problem, which can happen with best of us, even with you, at some point. And I believe it's Great idea to add to the Great Product such as pfSense.

https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers find another machine https://docs.netgate.com/pfsense/en/latest/solutions/sg-3100/

How about you read the original post again and this time understand it I have pfsense up a running and it running just fine I provided the hardware that I have it running on , I stated clearly that I have set up a VLAN on the pfsense box which has a wireless access point connected to which is working fine connected to a cisco sg350 managed switch I simply stated that I plan to connect a PBX to the switch for a VOIP system that feeds back through the pfsense box to the internet

hi RHLinux cpu is just around 20-30% usage, state is normal. no traffic shaping is being but a manual limiter has been set to each rule. already tested directly from each isp router and no problem found either.

This is absolutely ridiculous! It's October 2019 and still happening to me right now! Un friggen believable.