@kiokoman Saved my bacon! Thank you! And, despite @stephenw10's suggestion, @kiokoman had it right: date yymmddhhmm (two digit year and no seconds).

@yakatz Also a word of warning, as some who deals with PHP's LDAP bindings on a regular basis, ldap_connect is incredibly picky about TLS/SSL connections. And until about PHP 7.3, they are very hard to override and allow insecure connection even for testing.

@Gertjan @Rico Yes yes thanks ! I also found a very short and great video on the subject, so sharing for all people. https://youtu.be/AZ_ju6pCbow

thanks for your help, a reboot helped, now it works just fine :)

@bingo600 said in Best Budget Low Profile Intel Quad Port NIC (May 2020): I just got a refurb IBM i340-T4 for £18 https://www.ebay.de/itm/Intel-I340-T4-IBM-49Y4242-49Y4241-Quad-Port-Ethernet-Gigabit-PCI-Network-Adapter/324173295984 Not a bad price too Has "DELTA" engraved in the Xformers ... So should not be "China cr.." Edit: Not low profile though FYI you can get x5 Intel low profile brackets that fit the E1G44ET, E1G44ET2, I340-T4, I350-T4 quad port NICs here: eBay item number:131838369914 £4.70 for the lot.

I found that after adding/changing vlans, nics and other major settings it always needs rebooted to work right. also unifi gear can be slow to provision after changes, especially if using unifi cloud and/or remote network controller.

@marpfsense said in No WAN IP from Arris TG2492LG in Bridged Mode: @JKnott The computer gets the public IP from the modem when in bridged mode. Do it does not. The modem only provides local LAN IP's when NOT in bridge mode. In bridge mode, the cable modem simply forwards the DHCP discover, etc to the cable operator. Typically the service provider DHCP detects the differences between the cable-modem E-router and a bridged client device, and then responds accordingly. Pete

Yes, but it should be OK now.

@jimp OK, great!

At least you still have those WAN NAT rules. Many VPN providers have you remove them to give a feature they totally confusingly name "Kill Switch". Fail Safe would have been much better but I guess that didn't justify their existence sufficiently. Anyway the problem here was likely that the default route was changed causing Unbound to use the VPN for DNS queries and services like Netflix will detect that and block you. Steve

Yes it should not be enabled on the SG-3100 because, as it says, there is no driver cpufreq can use for the ARM processor there. It does not hurt trying to start it though beyond that error message. Steve

@provels my NIC came 4 days ago. Its an HP one. Guys, I think you were right. The intel nic is up and running without a glitch for 100 hours now! (I use net uptime monitor software) I downloaded a large file from nvidia and I had a long time to see a smooth graph like this (without disconnections). [image: 1591795510012-30263510-e667-47c7-a926-1e9d9aecf9c9-image.png] I think my problem was the network cards. Now I have only this HP NC365T Intel I340-T4 working with 3 ports NIC Teaming and one port for the "gateway" of pfsense. THANK YOU guys! I will never use a cheap nic again. Promise.

the interfaces are E1000e (aka intel board I think). without UEFI I don't leave. i have both an old pfsense intaller that is in BIOS with the E1000e and it works for me. and strangely I miss update does it. it gives me error in the search: Unable to check for updates

I have a generic J1900 Black box [image: 1591788871906-2fd5cae3-b2e1-49b0-9c38-44532fc5de32-image.png]

@90Ninety Super I told you " is UPNP still working? don't do that, instead use your own port forwarding, choose from a good high port range outside (F.E. 57443 to 443)" there are still issues with UPNP, although more significant with gameplay https://forum.netgate.com/topic/154153/test-request-upnp-fix-for-multiple-consoles-playing-the-same-game-static-port-outbound-nat