Can you post the interface configuration (screenshot preferable) for WAN and the gateways screen at System->Routing->Gateways.

Good luck.

OK now I understand but unfortunately I don't have a solution for you other than to manually assign a VIP when you need to access the modem admin page, which have already thought of.

What are you planning to do with pfSense?  Are you going to use it to route traffic between networks or act as a LAN appliance of some type?

HAProxy 1.7 stable was just released so you might want to try the 1.7 Dev package with the hope that it will be upgraded to stable soon enough.

Thanks for the reply's , i will give it another try and see if i can get the system running faster :)

Is that their Orwellian way of saying "DRM"? There's no DRM involved.  The videos are simple mp4's.  A quick Google shows it seems to be a Vimeo problem.  Lots of people with the same problem going back a couple of years.

I already linked you to the code - /conf.default/config.xml is the factory config.

Oh yes!  so stupid absolutely my fault sorry  :-\ Thank you!!

That's just it, though. PCI Compliance requires the CC server to have AV, but the AV interferes with the machine all the time and causes all kinds of billable issues. It is FUBAR.

The serial console is disabled in the web configurator (and /boot/loader.conf), but ttyv0 is still activated in /etc/ttys and I cannot disable it, as the file is regenerated on boot. Is there any way to disable the console permanently and stop it from taking over the first serial port?

John is definitely the man, totally helped get my complicated setup with Vlans and trunk ports working.  Thanks again John..  It takes a bit to get your head around it but in the end it is worth it to have a robust network that grows with you.

@KOM: You should configure it to send you a mail if there is a problem with mail-sending… ;D ;D ;D 8) 8) 8)

Hi KOM, I have now the install i got it the AMD(64bit) installer of the pfsense 2.3.2 i hope it will gets ok rather than the x86. Many thanks KOM papartsharingan

@johnpoz: I will have to look to the 1k frames at the beginning of the second thing..  As to multiple streams. Are you talking with udp or tcp? TCP. We run it with -i 1which is what i guess causes the problem. Running with -i 5 shows the output correctly.

@Harvy66: PFSense is optimized to be a firewall and router, not an app server. In my experience, doing a speedtest to PFSense uses about 2x the CPU and I get a 5% reduction in speed than testing through PFSense. Testing through PFSense means that that bandwidth is actually doubled since all incoming packets must also go out. This means doing a speedtest to/from PFSense is about 4x more expensive per packet. I don't see there being an issue having an app to do speed tests from pfsense. I know that my unifi USG Pro has an app built in to do speed tests and there are a few other firewall/routers that do the same.