Having the same issue. SG2440 unit on 2.4 beta snaps. No squid/snort/ntopng or any heavy packages installed. Native DHCP6 on the WAN (seems to possibly be related to DHCP6 or having IPv6 enabled in general). I have had this problem on 2.2 and 2.3 - whatever is causing it is mostly likely a very old bug, I see threads from 2011-2012 asking about the same issue. No good answers. I just posted this in the Development section… hoping for a response...

I am running the latest versions of both SO (v.14.04.5.2) & pfSense (v.2.3.3). @BBCAN177 did you have to change settings in any config file or should ELSA be able to automatically detect the source?] I posed a question in the SO forums. Pending response. Thx

??? Not sure if I understand this but if you spoofed the modems mac then it may take time for gateway to react. If the modem is in bridge mode(or just a modem) and you spoofed pfsense wan mac then same applies. If modem is not in bridge mode(combo unit) then all you did was break connection to modem and pfsense. Modem will still have same IP but you will need to cycle pfsense for new IP for wan interface to modem. My ISP does not react to spoofed mac very fast and it can be easier to shut down power of modem for a few hours before any change is possible at the ISP with a different mac setting. Also did you notice any warning about your mac number being wrong.

Thank you for your answers. I do not prefer to tweak in the source code. I hope the bug is resolved soon

Hi Jim What is the mail.php to send an email with an attachment? Thanks I

bit more info with the extel service, we were provided with a zte router, but i would love to just have the pfsense box, then have voip through that, or with a device like this behiend pfsense http://www.ebay.com.au/itm/UNLOCKED-CISCO-LINKSYS-PAP2T-PAP2T-NA-SIP-VOIP-Phone-Adapter-2-Port-Gateway-AU-/251528791178?hash=item3a9048c48a:g:CfsAAOSweWVXdeKy

Little tutorial to harden Firefox: https://airvpn.org/topic/15769-how-to-harden-firefox-extreme-edition/ Github for user.js to keep up to date: https://github.com/pyllyukko/user.js Check your browser tweeks: https://www.browserleaks.com/ Then unplug the cable. ;)

You might even use PHP.  :o ;D

@D0$+4@: Guys! I need help if my Setup could be possible.. PFsense PC: 2NIC with Lan Card (Onboard) Lan Card ( OnBoard)=  WAN 1NIC = Public IP is for fail over and connected to unmanaged switch for Web server 1NIC =  LAN w/ 3 VLAN and WiFi all connected in a unmanageable switch It is possible guys? thanks for helping :D What is your objective? You need to share more details.

It works installing 2.3.3 AMD64. no errors thanks

@jimp: No, because that only applies to pass rules, which already only log the first entry. That sets a state/rate limit for connections passed by a rule. After that limit they are blocked (and logged…) Subtle, but I see the point (I think). Making rules more complicated to limit logging is probably not advised, anyway. The task of limiting/filtering could equally well be done by the viewers. If the Log widget or Status/SystemLogs had a way to collapse adjacent similar entries in the listings that would be sufficient.

I think I may have fixed this. Hope this helps someone else: My setup is pfSense as DHCP server, and a WDS server acting as the deployment server but with WDSLinux also in play - http://www.syslinux.org/wiki/index.php?title=WDSLINUX Disable TFTP proxy Configure pfSense DHCP server for network boot on the client side interface, with next server IP address as the WDS server and for bootfile, for WDSLinux, "boot\x64\pxelinux.com" Allow UDP 69 on client side pfSense firewall rules through to the server. Allow UDP >1024 on server side pfSense firewall rules through to the client. The last comment due to seeing blocked traffic on ports 2070-2079 on one attempt and 49152 on a second. I looked up the ports but the associated services didn't seem relevant so I guess it must be picking a random higher port. I hope to clean this rule down but this is what it took to get it to work.