Looks fixed here - just tried it out :)

Module loaded all by itself after reboot :)

[2.2-ALPHA][admin@pfSense]/root(1): kldstat
Id Refs Address            Size    Name
1    3 0xffffffff80200000 20245a0  kernel
2    1 0xffffffff82412000 1043    amdtemp.ko
[2.2-ALPHA][admin@pfSense]/root(2):
[2.2-ALPHA][admin@pfSense]/root(2): uname -a
FreeBSD pfSense 10.0-STABLE FreeBSD 10.0-STABLE #16 e852cd6(HEAD)-dirty: Thu May  1 22:16:16 CDT 2014    root@builder-10.0-b3-amd64:/usr/obj.amd64/usr/pfSensesrc/src/sys/pfSense_SMP.10  amd64

Not likely.

pfSense-2.2-DEVELOPMENT-4g-amd64-nanobsd-vga-20140501-0223.img.gz

is working now.

Thanks!

Yes, it still gives:

Illegal instruction

on:
2.2-ALPHA (i386)
built on Thu May 01 02:23:21 CDT 2014
sudo Security 0.2.1

As JimP says, a bunch of 2.2 package stuff needs looking at.

2.2-ALPHA (amd64)
built on Mon Apr 28 16:52:25 CDT 2014

Just ignore if nothing has happened with this bug yet, but as an update: on this snapshot it's still the same.

Richard

Re-loading the latest snapshot seems to have fixed this.

:)

@wagonza:

@mais_um:

DNS Resolver - can't delete Host Overrides or Domain Overrides

That is fixed now amongst some other things as well.

I want to try but snapshots does't get out, only full and 512mb (amd64) seems ok by the size of the files I need 1GB vga.

Edit: Someones from 28 are ok like pfSense-2.2-DEVELOPMENT-1g-amd64-nanobsd-vga-up..> 28-Apr-2014 05:59      83363092

@erma - l i try using floating rules with and without quick (i wait loooooong time ,  maybe i should restart the box).

Is IPsec working? i whant to try windows phone 8.1 VPN, use iKEv2, needs strongSwan. Last i test (24 Apr 2014) service does't start.

/dev/cuaU0.x (Huawei e392) does't appear in ppp Edit -  Link interface(s) seems fine in dmesg, i will compare with 2.1

Thanks, cya

Probably need to sync time or set kern.hz to 100.

There are still some ongoing issues with PBIs and various issues (finding their own library paths, some crashes yet, etc). Once we get that all settled then most packages may start to work without much in the way of extra intervention.

And this recent one worked fine on Alix 2D13:
2.2-ALPHA (i386)
built on 20140428-0050
FreeBSD 10.0-STABLE

Thanks

I think you got a bad snapshot from a bad commit!

2.2-ALPHA (i386)
built on 20140428-0050
FreeBSD 10.0-STABLE

bandwidthd package downloads and installs, but the bandwidthd executable is in a different place to where it was in 2.1.n versions.
Applied the changes from https://github.com/pfsense/pfsense-packages/pull/651

Diagnostics->Command Prompt
Did this:

require_once("/usr/local/pkg/bandwidthd.inc"); bandwidthd_install_deinstall(); bandwidthd_install_config();

and it works. 3 minutes later I have bandwidthd graphs of my LAN clients usage.

So yes, these changes are needed with the latest builds of pfSense and the package.

Of the different squids available for 2.2, squid2 and squid-dev installs, but fails when going to the configuration page in the gui. Squid3 does not install, as the pbi and the package list have different version numbers (I.e. File name). Tested yesterday.

i've had the same issue here, 100% CPU:

262 root    122  20 16588K  2092K RUN    405:42 100.00% /usr/local/sbin/check_reload_status
  11 root    155 ki31    0K    16K RUN    741:56  0.00% [idle]

http://doc.pfsense.org/index.php/Switching_Kernels

It worked when I used it recently, at least to get to the loader prompt and I think once for Single User Mode.

We usually hide that on NanoBSD but the format/variables to control that boot menu changed for 10.x (or maybe it was even for 9.x)